Used Drum Press for sale (14,978)

Condition: good (used), Nagel Citoborma 480AB Paper Drill Ljdpfoywdmpox Ahvohd This machine is in very good condition. It has four drilling heads. Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal and manual buttons. Sturdy construction on a pedestal. The drill table is adjustable in all planes. This is one of the newest Citoborma models. Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t piston stroke 500 mm dayligth 600 mm usable table size 800 x 800 mm range L-W-H ca. 2,55 x 1,14 x 3,34 m weight ca. 3,5 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Lhodox Sr Evjpfx Ahvsd Prior sale is reserved.

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Lodpfexwp Nysx Ahvohd Subject to prior sale!

Condition: good (used), AMMANN dryer drum with gas burner Lhjdpoywctzsfx Ahvod Capacity: 160 tons/hour Year: 2006

Condition: used, machine/vehicle number: 008382, Max width workable: 800 mm Max length workable: 2800 mm Lhsdpfsywadwox Ahved Max height workable: 1320 mm Max feed speed: 40 m/min

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2022, Roll Press Fortuna Automat A 4 E Dough dividing and rounding machine Lsdjywadqopfx Ahvohd Roll press Fortuna Automat size 4 E with rounding deactivation Head cleaning with electric motor with stainless steel knife Dough input: 1200 to 3600 g, with rounding plate Connection: 400V, 16A-CEE plug Used machine from bakery

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 04/2027, type of input current: three-phase, Roll Divider and Rounding Machine Fortuna Automat A 3 H Dough dividing and rounding machine Roll press Lhedpfx Aoygdcuohved Fortuna Automat size 3 Head cleaning to the rear Very robust construction With 3 rounding plates Connection: 400V, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine We have many other roll presses in stock!

Condition: reconditioned (used), functionality: fully functional, total height: 1,520 mm, year of last overhaul: 2026, DGUV certified until: 04/2027, warranty duration: 6 months, total width: 600 mm, total length: 700 mm, input voltage: 400 V, Gostol roll press semi-automatic 4-14 Proven, advanced technology – tried and tested many times! Blades made of stainless steel with 3 pressure plates robust construction 14-piece division DGUV V3 safety tested exclusively with us Connection: 400V, 16A CEE plug Lodpjyagtijfx Ahvohd Dimensions: 600 x 700 x 1520/2200 mm (WxDxH) New machine & SAB certified guarantee and spare parts service included Other top dough dividers in stock!

Condition: reconditioned (used), functionality: fully functional, total length: 800 mm, total width: 720 mm, total height: 1,510 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 04/2027, type of input current: three-phase, year of last overhaul: 2026, Dough dividing and rounding machine Bread roll press TOP model Fortuna Automat Gr. 3+ Head cleaning backwards electrically Dividing head with new stainless steel knife Robust technology Dough divider with 3 rounding plates Connection: 400V, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm (WxDxH) Refurbished used machine with warranty & spare parts service Option: Platform or chassis Rounding plates Service package Maintenance contract Delivery service Spare parts box Training & commissioning Lhodpfx Aow H H N Sehvsd

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, total width: 600 mm, total length: 700 mm, total height: 1,520 mm, electrical fuse: 16 A, input frequency: 50 Hz, input voltage: 400 V, power: 1 kW (1.36 HP), type of input current: three-phase, DGUV certified until: 04/2028, overall weight: 375 kg, NEW NEW Roll Divider and Rounder NEW NEW Semi-automatic dough dividing and rounding machine, Model: 4-14 NEW Proven technology ... the original! Knife with easy cleaning position! Comes with 3 rounding plates Dough ring coated with easy click Dividing range: 130 to 250 grams/piece 14-piece division Mobile machine Only from us: DGUV V3 tested Connection: 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm (W x D x H) NEW machine & SAB tested With warranty + spare parts service Options: Leasing & rental service Rounding plates Maintenance contract Service package Instruction & commissioning Loan machine service Lhodpfx Aheu Eaudevod Many more roll dividers in stock!

Condition: like new (used), Year of construction: 2014, 4 meter width Nominal pressure 1250 kN Lhedpslqwvkjfx Ahvod CNC Back Gauge Quick Change Tooling

Condition: good (used), axle configuration: 2 axles, first registration: 09/1988, suspension: air, color: blue, Year of construction: 1988, Make axles: BPW Brakes: drum brakes Empty weight: 3.340 kg Carrying capacity: 22.960 kg GVW: 26.300 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information = Additional options and accessories = Lodsyi D Ebspfx Ahvjhd - Air suspension - Twist-locks

Condition: good (used), axle configuration: 3 axles, first registration: 01/2010, suspension: air, color: red, Year of construction: 2010, Axle configuration Make axles: SAF Brakes: drum brakes Rear axle 1: Max. axle load: 10000 kg Rear axle 2: Max. axle load: 10000 kg Rear axle 3: Max. axle load: 10000 kg; Steering Weights Empty weight: 6.100 kg Carrying capacity: 36.900 kg GVW: 43.000 kg Maintenance, history and condition APK (MOT): tested until 08/2026 Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information = Additional options and accessories = Lhjdpfx Ahjxxkqhevjd - Air suspension - Twist-locks

Condition: good (used), Year of construction: 1980, Frame Press Hess Type: VARIANT Machine No.: 2348 Year of Manufacture: 1980 Pneumatic Frame Press Working area: 2500 mm x height 2100 mm 5 beams with pressure cylinders from above Stop side left Cylinder stroke: 110 mm Pressing force per cylinder: 1100 kp (1 kp = 1 kg) Compressed air connection max. 15 bar Ljdoyv R Scepfx Ahvohd Weight approx. 550 kg External dimensions: 3300 mm x 700 mm x H 2650 mm Location: ex customer site - immediately available -

Condition: used, Roller Multi-Press XL 45kN22V | Used Small Equipment Want the expert inspection report with 0 checked points, 13 extra photos and a full video? Contact us! Listed in a Bid-to-Earn auction: - Earn rewards while bidding – see your reward for each bid - Get your full bid amount back if outbid - Rewards are credited when the reserve is met - Highest bidder wins when the auction ends Why choose us? - Fully inspected machines - Delivered to your jobsite – :articulated_lorry: estimate your shipping cost with our calculator Lhedpfxsyv Ri Us Ahvod - Money-Back Guarantee - Secure payment methods incl. pay-at-delivery option - Data-driven market pricing Location: Germany This machine is available on the Equippo Marketplace as part of a special BID TO EARN AUCTION format.

Condition: new, pressure 100 t stroke 400 mm 1010 mm 295 mm Heads 175x115 mm feed down 7,6 mm/sec feed up 13,4 mm/sec total power requirement 4,0 kW weight of the machine ca. 1000 kg dimensions of the machine ca. 1600x850x2450 mm Lodpfx Ahjyv N Ngjvehd Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material requirements - CE mark

Condition: new, pressure 55 t hole diameter in sheet thickness Ø 40 in 10 mm Ledpfxsyv Nxho Ahvshd throat 500 mm stroke 60 mm 38 /min. engine output 5 kW 20x20 mm 28x11 mm Overall size 1500x1100x2000 mm weight of the machine ca. 1.150 kg Accessories / equipment: - punching table

Condition: new, pressure 120 t stroke 400 mm dayligth 900 mm 1220 mm 400 mm Ledpfx Aeyv Ntfohvehd feed down 5,8 mm/sec feed up 9,5 mm/sec Heads 200x125 mm total power requirement 6 kW weight of the machine ca. 1250 kg dimensions of the machine ca. 1900x1000x2550 mm

Condition: new, pressure 180 t stroke 400 mm column daylight 1500 mm Frame Width 550 mm distance spindle /table max. 1000 mm total power requirement 7,5 kW Front light range 1550 mm Lateral light range 550 mm weight of the machine ca. 2100 kg dimensions of the machine ca. 2300x1200x2850 mm Domestic equipments: Lsdpfsyv I S Hjx Ahvehd - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark

Condition: used, Year of construction: 1995, pressure 110 t Ø 40x20 mm 750 no. of strokes 28 Hub/min work height max. 990 mm Machine No. 9557 weight of the machine ca. 3.400 kg Lodpfeyv N Rqsx Ahvshd dimensions of the machine ca. 2300x1300x2300 mm

Condition: used, Year of construction: 1989, pressure 50 t throat 610 mm total power requirement 7,5 kW Ledpfx Ahsyv Nvaovjhd machine weight ab. 1700 kg dimensions 1500 x 650 x 1700 mm

Condition: new, pressure 20 t stroke 150 mm dayligth 700 mm 500 mm 195 mm weight of the machine ca. 200 kg Overall size 670x870x1900 mm Domestic equipments: - Stable welded construction Lhjdoyv Nuvopfx Ahvod - manually via hand lever - Pressure gauge via pressure gauge - CE mark

Condition: used, pressure 40 t throat 175 mm Ljdpfx Asyv Nuiohvehd work height max. 1055 mm stroke 30 mm sheet thickness - max. 8 mm total power requirement 4 kW weight of the machine ca. 1020 kg dimensions 910 x 670 x 1930 mm

Condition: used, Year of construction: 2006, Pressing force 100 t diameter 40 mm throat 760 mm total power requirement 8,5 kW Lhjdpfjyv Nrzsx Ahvsd weight 3.600 kg Accessories / equipment: - punching table

Condition: used, 60 to stroke 400 mm Lhedpjyv Nm Sofx Ahvsd dayligth 900 mm 825 mm 295 mm Heads 150x95 mm feed up 5,6 mm/sec feed down 9,4 mm/sec total power requirement 4 kW weight of the machine ca. 700 kg Overall size 1460x850x2400 mm Further information: stable welded construction Printing cylinder adjustable Operation electrically via shift lever / manually via hand lever Pressure display by manometer Height of material supports adjustable by cylinder CE mark