Used Drilling Rig for sale (7,051)

Condition: used, Universal Tool Milling Machine with Digital Readout DECKEL Type FP 1 Universal Milling Machine Machine No.: 2102 - 3322 Year of manufacture: 1986 Travel range X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle mount: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed rate: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis active digital readout HEIDENHAIN Type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Spindle speed selectable via 2 motor speeds and 8 gearbox steps - Quill movement on vertical milling head: 60 mm - Vertical milling head swivels and is extendable by 100 mm horizontally - Fixed angle table 600 x 210 mm - Coolant system integrated in machine base - Separate electrical cabinet - Original chip tray for mounting on the machine base - Operating manual, electrical diagram, spare parts list included Kedpfx Ahjr D T Uyovjww Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition

Condition: used, Year of construction: 2010, 2010 machine, little used, requires inspection and maintenance. Kwodeywhmyopfx Ahvsw

Condition: used, Year of construction: 2010, Used machine from 2010, operational, requires inspection and maintenance. Kwjdpfxeywhcne Ahvsw

Condition: used, Year of construction: 2022, drilling capacity steel/cast iron 50/60 mm throat max. 1600 mm workpiece height max. 1300 mm throat min. 300 mm spindle taper: MK5 drilling depth in one stroke 300 mm vertical adjustment of arm 800 mm base plate surface area 1600 x 800 mm Kwodpfx Ahoyuy Szsvew spindle turning speed range 125- 1250 U/min total power requirement 3,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,4 x 1,2 x 2,7 m feed per revolution 0,025- 1,38 mm/r Without table.

Condition: used, Column Drilling Machine IXION - MAXION Type Unimax 3 Serial No. 203063 Year of manufacture: 2009 Drilling capacity: 30 mm Kwsdeykca Tjpfx Ahvsw Spindle taper: MK 3 – short quill Throat: 260 mm Quill stroke: 125 mm Table size: 360 x 500 mm Column diameter: 110 mm Spindle speed: 80 - 3200 rpm, infinitely variable Motor power: 0.8 / 1.5 kW Power supply: 400 Volt, 50 Hz - Spindle speed adjustable via 2 V-belt stages, 2 motor speeds and stepless variator drive - Digital speed display - Motor speed setting 1 for clockwise and counter-clockwise operation, setting 2 for clockwise operation only - Drill table height adjustment via hand crank - Drill chuck RÖHM Ø 1 to 16 mm - Emergency stop button Required space (L x W x H): 800 x 530 x 1800 mm Weight: 230 kg Very good condition

Condition: used, Drilling and Tapping Machine FLOTT Model TBZ 15 GL Serial No. 32177027 Year of Manufacture: 1986 Drilling capacity: 15 mm Spindle taper: MT2 Throat depth: 195 mm Quill stroke: 80 mm Table size: 275 x 200 mm Column diameter: 70 mm Spindle speed: 80 - 4500 rpm, 18 steps Motor power: 0.55 + 0.75 kW Power connection: 380 Volt, 50 Hz - Spindle speed selection via 2 motor speeds, 6 belt steps from the motor and 2 belt steps to the spindle - Drilling head height adjustment via crank and rack on the column - Tapping device with guide bush and selector for right- and left-hand threads - 3 guide bushes for right-hand threads: 0.7 mm, 0.8 mm, and 28G included - Tapping possible with or without guide bush - 1 geared drill chuck Ø 1.5 to 13 mm - Foot switch for cycle start - Emergency stop - Original metal base included Kedpfodzp S Nex Ahvsww Space requirements (L x W x H): 700 x 350 x 1850 mm Weight: 165 kg Good condition

Condition: excellent (used), Oscillating window milling machine OMG Pneumatic clamping of material Automatic strip feeding Aggregate angle adjustment 0-90° Pneumatic movement of spindles Guide bar supports Adjustment of oscillating movement of drills Kwedpfxeu Iwcwo Ahvjw

Condition: good (used), Year of construction: 1989, Offered from an insolvency is a ready to use tapping machine Manufacturer Fleet Kwsdpofm S Naofx Ahvew Model SB 15 GL year of manufacture 1989 Machine No. 34177063 Technical data: Cutting capacity M2-M12 Recording MK 2 Pinol stroke 80mm Throat 200mm Chucks Bilz WFP 1 + inserts drill chuck Röhm 0-10mm Foot switch Digital display Pinol stroke Single continuous cycle Emergency stop Speeds from 80-3150 rpm 380 volts Engine power 0,75KW max. dimension between table and holder 380mm Total height approx. 1700mm Accessories: 8 pcs. Lead screw --pitches-1.5-1.25--1.75--0.8--0.7--0.5--0.45--1.0 Operating instructions weight approx. 200kg

Condition: excellent (used), Year of construction: 2014, Axle 920 mm x-axis 3000 mm Material thickness Z 12 mm - 30 mm Feed speed 20 m/min. A - axis 360 degrees Minimum dimension: Plate: x = 300 mm Y = 120 mm z = 12 mm Kwedpfx Ahjfmdcqsvjw The machine is equipped with a 4 position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in X - direction Max. bottom depth with saw blade: 10 mm Motor 0,75 PS , 400 Volt Required extraction capacity: 2300 m3/h Location: comes to warehouse 54634 Bitburg - immediately available -

Condition: good (used), Nagel Citoborma 111 Paper Drill This machine is 100% functional and in very good condition. Kwsdpoyur E Hofx Ahvjw The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. Sturdy construction – weighs 35 kg. This is one of the newest Citoborma drill models, currently in production. 230V power supply Drill bit diameter: 2-9 mm Stack height: 50 mm Includes drill bits, a new cutting stick, and instructions. Made in Germany.

Condition: new, Year of construction: 2026, WEGOMA KF131F - Copy Router with Tripple drill Kwedpfx Ahjywcrqovow New machines. Аvailable.

Condition: used, spindle mount: MK 4, drilling depth: 50 mm, overall weight: 2,300 kg, Radial Drill Brand: Foradia Model: GH 50-1000 Serial No.: 5080 Drilling capacity: 50mm Maximum radius: 1,135mm Minimum radius: 425mm Longitudinal head travel: 700mm Kwsdpfeymw I Dex Ahvow Column diameter: 250mm Usable arm from column edge: 300mm Vertical arm stroke: 620mm Minimum spindle-to-base distance: 300mm Maximum spindle-to-base distance: 1,145mm Spindle stroke: 225mm Morse taper: 4 Speeds: 12 (35-1460rpm) Automatic feeds: 6 (0.05-0.35) Motor power: 3.5 + 1.5 Hp Weight: 2,300kg

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm Kedpfx Ashzbipjhveww - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: good (used), Year of construction: 2003, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine configuration • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device Dimensions and Travel Ranges Tool holder SK 40 Column diameter mm 195 Kwsdpfx Ahoyuqmijvjw Table size mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill travel (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle lower edge – table top min mm 70 / max mm 680 Distance spindle lower edge – floor min mm 970 / max mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacities Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 @ 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis AC servo motor kW 0.25 Y-axis AC servo motor kW 0.25 Z-axis AC servo motor kW 4.50 W-axis AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feed rate stepless mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, values absolute or incremental Units: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions by machining operation, material-dependent cutting data suggestions Tool management: up to 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X,Y,Z axes, program re-start with selectable functions for targeted entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - arbitrarily mounted rectangular parts - arbitrarily mounted round parts - alignment of cast and flame-cut parts - angular position detection for round parts by probing reference edges or surfaces Test graphic: Graphical display of drilling patterns.

Condition: new, Year of construction: 2015, Factory-new machine, has only been used for test runs, condition is as new. TECHNICAL DESCRIPTION The DIGIT MAGGI throughfeed drilling machine is an automatic multi-spindle throughfeed drilling machine equipped with 2 horizontal heads and 6 vertical heads, designed for high-volume production. TECHNICAL SPECIFICATIONS Number of horizontal heads: 2 Number of vertical heads: 6 Minimum distance between vertical heads: 165 mm Minimum distance between horizontal heads: 320 mm Distance between spindles: 32 mm Number of spindles in horizontal head (left red - right black): 23 (11 - 12) Number of spindles in vertical head (left red - right black): 11 (5 - 6) Maximum vertical drilling depth: 55 mm Maximum horizontal drilling depth: 65 mm Maximum workpiece dimensions: 2800 x 870 x 50 mm Minimum workpiece dimensions: 250 x 150 x 12 mm Number of motors: 12 Horizontal head motor power: 2 HP (1.5 kW) Vertical head motor power: 1.5 HP (1.1 kW) Kwjdpoxd Ruwjfx Ahvjw Number of clamps: 10 Loader feed speed: 57 m/min Working air pressure: 6–8 bar Standard air consumption: 60 l/cycle Maximum clamp height above worktable: 75 mm Overall dimensions: 4150 x 1600 x 1800 mm Worktable height: 950 mm Packaging dimensions: 4300 x 1950 x height 1900 mm

Condition: used, Number of rows 12 0 distance between row 45 cm Working with 5,4 m Ksdpsyv Ixmsfx Ahvsww

Condition: used, Number of rows 4 0 distance between row 75 cm Working with 3 m Kedpfoyv Ivxjx Ahvoww

Condition: not inspected (used), Year of construction: 1986, functionality: unexamined, machine/vehicle number: 7393, travel distance X-axis: 500 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 4,000 rpm, controller model: Siemens 810, No reserve price – guaranteed sale to the highest bidder! Kwedpfxoyv A A Hs Ahvew TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 360 mm Travel Z-axis: 400 mm Spindle speed range: 20 – 4,000 rpm Table size: 800 x 390 mm Feed rate range: 1 – 2,000 mm/min Rapid traverse: 5 m/min Number of T-slots: 6 T-slot width: 14 mm T-slot spacing: 63 mm Tool holder: SK 40 Number of gear steps: 4 MACHINE DETAILS Control system: Siemens 810 Total power requirement: 9 kW Dimensions & Weight Space requirements (L x W x H): approx. 2,500 x 2,900 x 1,900 mm Machine weight: approx. 2,000 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, power: 3.5 kW (4.76 HP), input voltage: 400 V, input current: 5 A, input frequency: 50 Hz, type of input current: three-phase, Z. Bavelloni VT1250SA + L automatic horizontal drilling machine with 2 drilling heads (upper and lower). The machine is in very good working condition, equipped with a laser for precise hole positioning and a switch for spindle speed adjustment. It will be delivered with a set of diamond drilling tools. The machine features a water tank and water pump. Kedoyghh Uopfx Ahvjww

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Kwodpfx Ahjyvz Tdevsw Additional information incl. 15 plates

Condition: good (used), Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Kodpoyvz Nrofx Ahveww Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Condition: ready for operation (used), Year of construction: 1981, Available immediately from Swiss toolmaking facility: Rapid radial drilling machine HKS Model HKS 40 Year of manufacture: 1981 Morse taper MK 4 Drilling capacity: 40 mm Arm reach: 1120 mm Installation height: 780 mm Table size: 1520 x 560 mm Kedpfoyvzb Iox Ahvsww 3-axis digital readout for table adjustment Spindle drive power: 3.8 kW Spindle speeds: 26 – 1940 rpm Quill stroke: 200 mm Feeds: 0.05 – 0.45 mm/min Thread cutting device Coolant system Total power consumption: 6.5 kW Hydraulic vice Weight: 2600 kg Offered at a price of EUR 2,500.— plus VAT ex location

Condition: good (used), Year of construction: 1999, Drilling capacity in steel (diameter): 60 mm / MK5 Kjdpfx Ajyvy A Rehvoww Quill stroke: 310 mm Spindle speed: 28...2500 rpm Table size: 1470 x 986 mm Total power requirement: 4 kW Machine weight approx.: 4.6 t

Condition: new, Alzmetall Alzstar 40/S pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/S Condition: new Drilling capacity steel E335 (St 60) 40 mm Short spindle MK 3 Spindle stroke 120 mm Thrust 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm Kjdpeyucc Ajfx Ahvsww T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 117/701 mm Feed manual Machine height without options approx. 1840 mm Net weight approx. 270 kg Spindle speed rpm 160-2250

Condition: new, Alzmetall Alzstar 30/s pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 30/S Condition: new Drilling capacity steel E335 (St 60) 30 mm Thread cutting Steel E335 (St 60) M 16 Cast EN-GJL-200 (GG20) M 20 Short spindle MK 3 Spindle stroke 140 mm Thrust 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 132/724 mm Feed manual Machine height without options approx. 1770 mm Net weight approx. 260 kg Drive continuously variable Motor 750 / 1500 rpm 750 / 1500 rpm Power 1.0 / 1.6 kW 1.0 / 1.6 kW Spindle speed rpm 225-4300 Kjdpfx Ajyuccpohvjww