Used Drilling Rig for sale (7,051)

Condition: excellent (used), bore capacity in steel (diameter) 45 mm throat 300 mm bore stroke 160 mm taper MK 4 table surface area 600 x 500 mm table adjustable 550 mm total power requirement 0,8 kW weight of the machine ca. 0,5 t Kjdpfx Aevn U Umohvsww dimensions of the machine ca. 0,8 x 0,6 x 1,8 m

Condition: used, Year of construction: 2008, Technical details: bore capacity in steel (diameter): 40 mm throat: 350 mm bore stroke: 120 mm bore capacity in cast iron: 60 mm spindle taper MT: MK 4 spindle throat: 350 mm spindle speed:: 50 - 1450 / 18 step U/min feed: automatisch/manuell mm/U Distance spindle/table max.: 25 - 705 mm table clamping surface:: 430 x 430 mm drill table adjustment: 680 mm column diameter: 150 mm distance spindle center to floor plate:: 1210 mm total power requirement: 1,6 kW weight of the machine ca.: 350 kg dimension machine xH: 0,95 x 0,55 x 2,3 m Height-adjustable table(swivel and tilt adjustable ) Table can be swiveled 45° left/right and rotated 360° around the column Thread cutting up to M24 Coolant system A vise is mounted, and a threading device is included with this machine. Kwodpfx Ahoviqybsvjw *

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 452 year of construction 1996 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm distance spindle nose to table 185 - 685 mm table size 490 x 400 mm Spindle speed 50 - 500 rpm. Stepless Drill slide feed rate 20 - 224 mm/min. Stepless Drill slide rapid traverse 4.5 m/min. Motor power feed 0.18 kW Kwodpfeikrtqex Ahvjw Motor power rapid traverse 0.75 kW Motor power drilling spindle 1.1 kW (speed 1000 rpm) Mains connection 400 volt, 50 Hz - Spindle speed infinitely variable via frequency converter - Drill slide feed infinitely variable via frequency converter - 2 operating modes set-up and automatic mode - central lubrication - control cabinet at the back of the machine - swivelling control panel - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 1000 kg. good condition

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, workpiece length (max.): 2,500 mm, workpiece width (max.): 700 mm, number of spindles: 40, TECHNICAL DETAILS Panel length min.: 170 mm Panel length max.: 2,500 mm Panel width min.: 50 mm Panel width max.: 700 mm Number of injectors: 2 Number of support units: 2 Vertical spindles Speed: 2,800 rpm Number of spindles: 40 Horizontal spindles Speed: 2,780 rpm Number of spindles for horizontal drilling in Y-axis: 6 Number of spindles for horizontal drilling in X-axis: 8 (4 on each side) MACHINE DETAILS Control system: WINDOWS Ksdpfx Aeyq Irhshveww Motor power (vertical drilling): 3 kW Motor power (horizontal drilling): 2.2 kW Note: Tools not included The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 6106

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Kwsdpfx Aowuz Dgohvjw Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507

Condition: good (used), Code: 0342 Brand: VITAP Model: ALFA 35 - CE Standard Kedpfx Aeywm A Hohvjww Semi-automatic multiple boring machine with 35 spindles for furniture, kitchens, bathroom furniture, custom-made furniture, panels - CE Standard Technical data N° 35 spindles with quick coupling Centre distance between each spindle mm 32 Centre distance between first and last spindle mm 1088 Max depth of hole mm 70 Board dimensions mm 1330 x 500 Spindle rotations per minute 2800 Motor power Hp 3 Turret with 6 different depth positions Side fence Horizontal/vertical 45 degree pneumatic tilting head Metric bar 3000 mm with stops Operating pressure 6- 8 atm Overall dimensions mm 1590 x 860 x 1250 h Weight kg 454

Condition: used, Year of construction: 1992, machine/vehicle number: 293784, Drill spindles: 8 Drill spindle rotation direction: 4 right and 4 left Drill spindle speeds: 2800 rpm Kwsdpfjbnnybjx Ahvjw Shaft mount: 10 and 11 mm Drill stroke: 100 mm Drive motor: 380 V, 1.1 kW Table height above floor: 840 mm Space required: approx. 650 x 400 x 1700 mm Weight: 120 kg

Condition: new, machine/vehicle number: 37 R9633-2, Drill-Ø with twist drill up to: 13 mm Drill-Ø with crown drill up to: 35 mm Kwsdpfx Ahec N T Hrjvew drilling stroke: 115 mm drive power: 680 W electrical connection: 220/240 V magnetic base dimensions: 92 x 172 mm weight: 13 kg

Year of construction: 2004, condition: ready for operation (used), Drill-Ø: 13 mm spindle mounting: B 16 Speed with changeover for left and right: 0 - 840 rpm power input: 450 W for alternating current: 230 V Keded D Th Hepfx Ahveww

Condition: good (used), for spindle taper: MK 3 Drilling Ø: 10 mm Thread cutting: M 5 / M 8 min./max. Spindle distance: 35/120 mm Case diameter: 170 mm Case length: 218 mm Kwodod R Atcopfx Ahvsw weight:

Condition: used, drilling capacity steel/GG: 30/40 mm spindle taper: 3 MK arm length: 350 mm table size: 350 Ø mm spindle sleeve stroke: 150 mm spindle turning speed range: 155; 280; 470 u. 790 rpm Kwjdob Hl H Iopfx Ahvew carriages: 0,1/0,2/0,3 mm engine: 380 V, 1,1 kW space needed: 950 x 530 x 2300 mm weight: 445 kg

Condition: used, Drilling jig on base plate with three-jaw chuck as well as 2-fold height-adjustable and horizontally movable holder for a drilling machine. Consisting of: Three-jaw chuck AROWA, 250 mm Ø, horizontally rotatable by 380° with scale as well as indexing and clamping. Basic frame for holding a drilling machine guided on 2 columns and adjustable in height by means of a spindle, on it in horizontal plane around 120 mm with scale adjustable admission. On top of this, again on a round column, basic height adjustment on the column with clamping. Ksdpfx Ahoc U U Udsvjww Round guide with rack and lever for drill feed, stroke 100 mm. Space requirement over all: 600 x 400 x 850 mm high weight:

Condition: good (used), drilling capacity: ca. 13 mm spindle taper: B 16 MK throat: 250 mm Kodpod In Sfefx Ahvsww table size: 220 x 325 mm spindle turning speed range: 350 - 1500 u. 750 - 3000 rpm engine: 380 V, 0,3/0,4 kW space needed: 680 x 400 x 1670 mm

Year of construction: 1956, condition: used, machine/vehicle number: 6255, drilling capacity steel/GG: 23 mm spindle taper: 2 MK arm length: 300 mm table size: 300 x 300 mm Kwodpfx Ahjbn Ak Ujvew spindle sleeve stroke: 100 mm spindle turning speed range: 190 - 1500 rpm engine: 380 V, 0,5/0,75 kW space needed: 410 x 670 x 1950 mm weight: 180 kg

Year of construction: 1970, condition: used, machine/vehicle number: 12901, drilling capacity steel/GG: 50/60 mm Kjdpey R Thjfx Ahvoww spindle taper: 5 MK arm length: 400 mm table size: 700 x 600 mm spindle sleeve stroke: 275 mm spindle turning speed range: 32 - 1030 rpm carriages: 4: 0,1 - 0,4 mm engine: 380 V, 2,2/3,7 kW space needed: 700 x 1200 x 2700 mm weight: 1240 kg

Condition: new, Drill head E-150 working range: 120 - 150 mm with shank: MK 5 Kwsdpfodkg Rmex Ahvew with cooling ring cutting blades consisting of material HSS-E-PM ASP 30, ASP30 TiN, centre drill HSS

Year of construction: 1985, condition: excellent (used), machine/vehicle number: 2476, for spindle taper: MK 4 Max. Input speed: 1500 rpm Diameter up to: 10.2 mm Shank Diameter for quill: Construction height: 500 mm Weight: Ksdjd R Em Ispfx Ahvoww

Condition: used, Drilling capacity: 35/40 mm Kjdeb N Ahlepfx Ahvsww Spindle mount: MK 4 throat: 230 mm Table size: 1050 x 625 mm Table height above floor: 560 mm small / large distance between table and drilling sleeve: 549/960 mm quill stroke: 170 mm spindle speed infinitely variable: 50 - 800 rpm space requirement: 1050 x 1000 x 2170 mm Weight: 250 kg

Condition: used, drilling capacity steel/GG: 15 mm spindle taper: 1 MK arm length: 300 mm table size: 210 x 300 mm spindle sleeve stroke: 110 mm spindle turning speed range: 200 - 3000 rpm engine: 380 V, 1,1 kW Kwjdpfx Aevxpp Hjhvjw space needed: 850 x 420 x 1860 mm weight: 220 kg

Condition: used, Year of construction: 1971, drilling capacity steel/GG: 23 mm spindle taper: 3 MK arm length: 275 mm table size: 300 x 400 mm spindle sleeve stroke: 90 mm spindle turning speed range: 100 - 1180 rpm Kedpforz Nqajx Ahvsww carriages: 0,1/0,6/0,25 mm engine: 380 V, 1,25/2,15 kW space needed: 850 x 400 x 1770 mm weight: 280 kg

Condition: good (used), Year of construction: 1989, for twist drills: 3 - 50 mm Ø Point angle: 90 - 140° Adjustable relief angle Grinding motor: 2800 rpm, 0.25 kW Gear motor for swing motion: 0.12 kW Grinding wheel dimensions: 175 x 32 x 20 / 90 x 20 mm Space required: 800 x 550 x 1140 mm Kjdpfx Asx Ea Nmehvsww Weight: 120 kg

Condition: ready for operation (used), Year of construction: 2006, Speeds up to: 2250 rpm Feed rate: 0 - 300 mm/min Drive power per motor: 2.9 kW Electrical connection: 400 V Weight: 395 kg Kwsdpoyfgd Eofx Ahvow Required space: 4100 x 1670 x 1450 mm

Condition: ready for operation (used), Drilling capacity steel/GG: approx. 25 mm Spindle mount: 2 MK Thrust: 300 mm Table size: 305 x 380 mm Quill stroke: 115 mm Spindle speeds: 200 - 1200 rpm Kwjdpfxsv Du Rae Ahvjw Drive motor: 380 V, 1/1.5 kW Space required: 800 x 400 x 1800 mm Weight: approx. 280 kg

Condition: excellent (used), Year of construction: 1991, Drilling diameter in St 60/GG 20: 28/32 mm Spindle taper: MT 3 Throat: 250 mm Spindle stroke: 120 mm Table size: 400 x 415 mm Maximum distance between table and quill: 665 mm Spindle speeds: 140 - 2000 rpm Drive motor: 380 V, 1.1/1.3 kW Weight: 210 kg Space requirements: 800 x 420/600 x 1790 mm Kwsdpjyk T A Ejfx Ahvsw

Year of construction: 1984, condition: ready for operation (used), drilling capacity steel/GG: 18/23 mm Kwsdpfjk Tzu Rox Ahvsw spindle taper: 2 MK arm length: 250 mm table size: 250 x 370 mm spindle turning speed range: 400 - 5000 rpm engine: 0,48/0,6 kW space needed: 750 x 500 x 1670 mm weight: 130 kg