Used Drilling Milling Machine for sale (91,994)

Condition: used, Year of construction: 1990, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Dufour milling machine Type 220 With digital readout Bedoxtm Hzjpfx Acyoww

Condition: good (used), Year of construction: 2016, X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Bwodpfxew Tc Hfe Acyjw Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight: Taper angle/height: Automatic Wire Feeding: Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Bjdpfx Asxtmqtocyoww Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical Data Grinding/Workpiece Diameter: up to approx. 300 mm (partially up to 350 mm) Bsdpfjxtiunjx Acyoww Grinding Length/Stroke: approx. 550 mm (slide travel) Module range (for hobbing cutter resharpening): min. module approx. 0.5 to max. module approx. 25 Number of flutes: typically 1–99 pieces (depending on tool set) Grinding wheel diameter: approx. 150–300 mm Grinding wheel speed: up to about 2,700 rpm Centre distance (workpiece spindle): typical range 400–800 mm Swivel/Pitch range: e.g. grinding wheel head swivel 0–15° Machine weight and space requirement: approx. 4.2–4.9 t weight; space approx. 3 × 2.6 × 2.3 m Electrical data: operating voltage e.g. 380 V three-phase, control 24 V, auxiliary voltage 220 V

Condition: used, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 125 mm spindle taper MT 3 total power requirement 1,8 kW weight of the machine ca. 250 kg dimensions of the machine ca. 1500x1000x1900 mm Features: -Stepless drive Bwjdpoxtfzkefx Acyjw -Drilling depth stop -Extra-long drill spindle

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # distance between drilling spindles 32 mm working width 640 mm max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle Bwjdped Supgsfx Acyjw suction DM 80 mm machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg

Condition: used, total width: 600 mm, total length: 700 mm, total height: 700 mm, - Documentation available: No - Main motor power [kW]: 0.75 - Drills included: Yes - Tool wrenches included: Yes - Voltage [V]: 400 - Power [kW]: 0.8 - Transport dimensions: 700mm x 600mm x 700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bsdpfx Aew N Nq Ascyeww Yorick Diebels

Condition: excellent (used), SCM T150 spindle moulder (under-table type) Automatic spindle height adjustment (up/down), tiltable from -10 to +45 degrees, and fence adjustment Interchangeable 50 mm spindle Pneumatic HSK spindle clamping (same principle as CNC machines) Long tables 250 cm with extension 4-roller power feed 5 spindle speeds 5.5 kW motor Spindle lock Brake Very good condition, machine checked and fully ready for operation. Bjdpfsxun Uvox Acyoww

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, table width: 450 mm, table length: 1,530 mm, table load: 350 kg, X-Axis: 650mm Y-Axis: 500mm Bedpfextbkuox Acyjww Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: unexamined, Copy Milling Machine DECKEL Model: KF 1 Machine No.: 61510 Year of manufacture: 1981 Bjdpfsxunlzjx Acyjww Weight approx.: 1 t

Condition: good (used), Year of construction: 2009, functionality: fully functional, Spindle diameter 30 mm Tiltable on both sides from -45.5° to +45.5° Motorized height and tilt adjustment Infinitely variable speed adjustment from 1,500 to 10,000 rpm Table size 1100 x 760 mm Bodoxuniyepfx Acyoww Motor power 7.5 kW Control panel on top Cast iron fence jaws Height adjustment 125 mm Extraction ports 2 x 120 mm Weight approx. 900 kg WITHOUT power feed unit The machine will be available from approx. January 2026

Condition: excellent (used), Year of construction: 2022, Tilting spindle moulder with sliding table FELDER Model F 700 Z Sliding table length: 1000 mm Motor power: 5.5 kW Motor voltage: 3 x 400 V, 50 Hz Spindle tilting range: 90 - 45 degrees Spindle diameter: 30 mm Spindle speed: 3500/6500/8000/10000 rpm Table opening: 230 mm Extraction port diameter: 120/80 mm CE Note for used machines: • Errors in technical specifications and prior sale excepted. • Listed prices are ex-location – free loading! • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty. Buyers are welcome to inspect the machines at the location. Bedpfx Acswu D A Eeysww • Special agreements only valid in written form. (We only respond to inquiries including your address and telephone number!)

Condition: used, Year of construction: 1986, - Year: 1986 - Documentation available: No - Serial number: 2181 - Control: Conventional - Motor power: 4.0kW - Drilling depth: 130mm - Spindle speed max.: 2500rpm - Digital readout: No - Tool holder: 45 - Table width: 750mm - Table length: 1020mm - Drilling capacity: 2mm - Travel X: 1600mm - Spindle diameter: 75mm - Travel Z: 900mm - Max. reach: 1600mm Bjdpewnh Rtofx Acysww - Number of axes: 2 - Spindle speed min.: 28rpm Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, The VHF 2.2 is a powerful Conventional Vertical Milling Machine from the renowned KNUTH brand, designed for versatility in Universal Milling Machines. This machine features large travels and a vertical and horizontal spindle, each with separate drives, providing robust machining capabilities. The vertical head swivels ±45° and includes a movable quill, making it ideal for various tasks in repair or training shops. It boasts a high-strength cast-iron machine bed, precision-ground guideways, and a sizable milling table setup area of 1,270x280 mm. With an automatic feed system on the X and Y axes, operators can maneuver effortlessly. The standard equipment includes an outer arbor support, coolant system, and work lamp, ensuring a comprehensive setup for efficiency and comfort. With its excellent price/performance ratio, the VHF 2.2 stands out as a precise and reliable choice in the Conventional Vertical Milling Machines category. Don't miss the opportunity to enhance your machining capabilities; request a quote today. Bjdpfx Acjuzll Hjysww

Condition: good (used), Year of construction: 1994, spindle drilling machine 1994 (engine new 2015) machine no.: PB04.08.94.261 4 drill heads, can be upgraded to 6 drill diameter: 3mm to 14mm hole spacing: 31.7mm to 293mm hole spacing using the sliding table: 1mm to 420mm located: Germany Insertion depth behind the drills: 25 mm sliding table width: 450 mm Sliding table size in front of the drills 300 mm Bjdpfxjvccnke Acyoww maximum stacking height: 50 mm power requirements: 230/400 volts 3 phases, 50 Hz, 1.87 kWh. space requirement: 770mm (W) x 760mm (D) x 1350mm (H) weight: 275 kg net located: Germany available: immediately

Condition: used, Motor 6 / 7.5 kW Bwedpfx Acow Enw Isyow Location: Supplier

Condition: good (used), Year of construction: 1998, dia. of draw-in collets 17,5 mm internal taper of cone draw-in collets MK 1 , Mk 2, Ga speeds of grinding spindle 2800 U/min total power requirement 0,25 kW weight of the machine ca. 67 kg Bsdpfx Ajxr Raiscyoww dimensions of the machine ca. 510 x 565 x 290 mm Milling cutter grinder with a base cabinet for grinding milling cutters or styli in a central and offset position. The dividing head holder allows for circular movements in all directions, as well as longitudinal and transverse movements of the tool axis. The tool holder has a 40 mm longitudinal adjustment, a 10 mm lateral adjustment, and a 15 mm fine adjustment of the dividing head holder relative to the grinding spindle. Machine dealer with own stock of 1600 m².

Condition: used, Column drilling machine IXION - MAXION type Unimax 3 serial no. 201516 year of construction 2009 Drilling capacity 30 mm Spindle holder MK 3 - short quill throat 260 mm Quill stroke 125 mm Table size 360 x 500 mm Column diameter 110 mm Spindle speed 80 - 3200 rpm infinitely variable Motor power 0.8 / 1.5 kW Mains connection 400 Volt, 50 Hz - Spindle speed via 2 V-belt stages, 2 motor speeds and infinitely variable via variator drive - Motor speed level 1 for clockwise and counter-clockwise rotation, motor speed level 2 for clockwise rotation - Handwheel for quill fine feed Bwsdpjrz Tuwjfx Acyow - Drill table height adjustment via hand crank - RÖHM quick-action drill chuck Ø 1 - 16 mm - Emergency stop button Space requirement L x W x H 800 x 530 x 1800 mm Weight 230 kg Very good condition

Condition: used, Price: On request Bwedpfxowfpbbs Acyow - Documentation available: No - Drilling depth: 150mm - Model: ördinatenboor - Digital readout: Yes - Table width: 1500mm - Table length: 2200mm - Travel X: 2500mm - Travel Y: 1400mm - Spindle diameter: 100mm - Travel Z: 1000mm - Number of axes: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, The KNUTH R 60 V is a powerful and versatile radial drilling machine designed for exceptional drilling, reaming, and countersinking in steel or cast iron, making it a preferred choice among professionals in production and construction companies. This robust machine features a premium construction with a large column and a highly torsion-resistant boom, ensuring maximum rigidity and minimal clamping offset. With its motorized boom height adjustment and oil-bath lifting gears, operators experience smooth handling, even with large and heavy workpieces. Additional highlights include infinitely variable spindle speeds with a digital display and an integrated coolant system, ensuring reliability and cost-effectiveness. The R 60 V, part of the renowned Radial Drilling Machines group, stands out for its modern design and user-friendly operation. Contact us to request a quote and elevate your drilling capabilities with KNUTH’s exceptional machinery. Bwedpfxeuyic Hj Acyew

Condition: used, Year of construction: 2018, x-travel 1.800 mm y-travel 700 mm z-travel 700 mm control 840 D sl op. ( CELOS ) Siemens turning speed range - main spindle 20 - 20.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 / 86 Nm tool taper HSK-A63 swivellable B: +/- 100 ° table surface area 2.100 x 700 mm max. table load (1.500) kg number of T-slots 7 table diameter 750 mm max. table load 500 kg number of T-slots 7 Bwsdpfx Aexr Racecysw T-slot - distance 63 mm table height 255 mm rotatable C: 360 ° turning speeds 16 1/min resolution 0,001 ° number of toolpositions 60 pos. tool taper HSK-A63 max. tool weight 6,0 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm change-time chip to chip 7,6 sec rapid traverse ( X / Y / Z ) 40 m/min Accelaration 4 m/s² feed speeds max. 40.000 mm/min Feed force ( X / Y / Z ) 8 kN total power requirement 73 kVA weight of the machine ca. 13,7 t dimensions of the machine ca. 7,5 x 6,5 x 3,0 m 5-Axis CNC - Travel Column Milling Machine DMG MORI - DMF 180-7 - Motorspindle SpeedMaster - Swivel-Head (B-Axis) - rotary-table included in working-table - internal coolant system - Spindle, Y-axis and B-axis clamping overhauled in 04/2025

Condition: good (used), functionality: fully functional, CNC tool milling machine MIKRON WF 21 C CNC control Heidenhain TNC 155 year of construction 1988 Technical data X: 450 mm Y: 400 mm Z: 400 mm Table size 700 x 350 mm Spindle holder ISO 40 Spindle speed 40-4000 rpm 21 steps Feed 2-3000 mm/min. Rapid traverse X and Y 6000 mm/min. Rapid traverse Z 5000 mm/min. Pinol displacement 90 mm Distance table - spindle nose max. 450 mm Main spindle drive 3.3 and 4 kW Bsdpfx Acexr Dy Ajyjww Space requirement L x W x H 3000 x 2700 x 2000 mm Weight 2400 kg

Condition: good (used), Year of construction: 2000, Drilling unit SUHER Power master, year of manufacture 2000. Bwodpsxr Dlxjfx Acyew

Condition: used, total height: 2,500 mm, total width: 1,000 mm, total length: 2,200 mm, Empty weight: 2.500 kg - Documentation available: No - Control: Conventional - Motor power: 6.0kW - Drilling depth: 150mm - Spindle speed max.: 2650rpm - Model: iaalboormachine - Table width: 600mm - Table length: 1300mm - Drilling capacity: 32mm - Travel Y: 1000mm - Spindle diameter: 40mm - Travel Z: 600mm - Max. reach: 1000mm - Spindle speed min.: 30rpm - Transport dimensions: 2200mm x 1000mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bjdpjwnilxefx Acyjww Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,800 mm, total height: 2,300 mm, total width: 1,800 mm, Empty weight: 1.350 kg - Documentation available: No - CE marking present: Yes - Motor power: 2.0kW - Drilling depth: 150mm - Spindle speed max.: 3525rpm - Digital readout: Yes - Tool holder: SK40 - Table width: 260mm - Table length: 1245mm - Travel X: 745mm - Travel Y: 406mm - Spindle diameter: 100mm - Travel Z: 305mm - Type digital: ACURITE III - Spindle speed min.: 60rpm - Transport dimensions: 1800mm x 1800mm x 2300mm (l x w x h) - Transport weight [kg]: 1350kg - Transport packages [pcs.]: 1 Financial information Bsdpfx Aewnibgecyoww VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum