Used Drill Bit Sharpener for sale (5,912)

Condition: ready for operation (used), Column drilling machine / ALZMETALL AB 3 ES Duedpfx Aezkv N Tjahow - Well-maintained, original condition - Drilling capacity / steel max. 35mm - Arm reach approx. 280mm - Table size approx. 600x470mm - Drilling stroke approx. 180mm - Taper shank MK 3 - Stepless speed control - Speed range 65 - 1750 rpm - Drilling depth stop - Spindle guard - Emergency stop - Foot switch - Analog speed display - Drill chuck - Documentation Dimensions: L x W x H 1.2 x 0.8 x 2 meters / Weight approx. 500 kg Errors and omissions excepted.

Condition: used, Clamping cube for radial drilling machine Clamping plate, clamping cube, clamping block Clamping surface on top: L x W = 600 x 500 mm Clamping surface on the side: L x H = 600 x 460 mm Overall height: 505 mm T-slots: 20 mm T-slot spacing: 150 mm Dujdszinz Sspfx Aahsw Overall dimensions L x W x H: 680 x 500 x 505 mm Weight: 150 kg Good condition

Condition: used, Univ. universal milling machine with active digital display, DECKEL type FP 1 Universal milling machine Machine No. 2102 - 6130 Year of manufacture 1991 Duedpfxjzinzxo Aahjw Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 210 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate 5 to 500 mm/min Rapid traverse 1200 mm/min Motor power 1.6 and 2 kW, pole-changing Mains connection 380 Volt, 50 Hz - Active digital display for 3 axes, HEIDENHAIN type TNC 113 - Stepless feed in the X, Y and Z axes - Spindle speed controlled via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable 100 mm - Fixed tilting table 600 x 210 mm - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Protective enclosure with hinged doors around the machine table - Original chip tray for mounting on the machine base - Machine lamp - Counter holder with counter bearing - Electrical diagram available Space requirement L x W x H 1600 x 1250 x 1750 mm Weight 900 kg Good condition

Condition: used, Univ. universal milling machine with active digital display, DECKEL Type FP 1 Machine No. 2101 - 7088, Year of manufacture 1993 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Djdpfjziny Ijx Aahsuw Feed rate X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.6 and 2 kW, pole-changing Power connection 380 Volt, 50 Hz - Active control and digital display for 3 axes, HEIDENHAIN Type TNC 123 - Stepless feed rate via servo motor in the X, Y, and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable by 100 mm - Swivel, rotary, and tilting angle table DECKEL, Type 2114 - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Hinged protective shield with safety switch - Original chip tray for mounting on the machine base - Electrical diagram available Space requirement L x W x H 1600 x 1200 x 1770 mm Weight 900 kg Good condition

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Bacci Lignum horizontal drilling machine with oscillation, pneumatic table, adjustable Dodpfswyghbsx Aahjuw

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 179-000-000000-000, functionality: unexamined, Machine data Designation: IMI Installation dimensions: approx. 2000 × 1200 × 2300 mm Dodozim R Espfx Aahouw Weight: approx. 1500 kg

Condition: used, Year of construction: 1996, with 1 drilling head used in top condition cleaned functionally tested Manufacturer: Hettich Type: Blue Max Mini Year of manufacture: 1996 Machine No.: 06316 CE type approval Number of spindles: 4 Drilling feed: pneumatic Table model, length x width: 800x400mm Swinging stops: 4 Drill chuck: shank 10 mm Dujdpfx Aezkvyxsahjw Dust extraction connection: 50mm Space requirement approx. L x W x H mm: 800x600x650 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: excellent (used), 1.5 kW motor. Weight: 1000 kg. Table length: 125 cm. Two pneumatic clamping devices. 27 spindles. Spindle spacing: 35 mm. Duedpjzkvh Nsfx Aahsw

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Working Table: Pod and Rail Duedoyqxxrepfx Aahjw Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 40 Total number of tool changer positions: 22

Condition: used, Scharmann drilling machine Available from September Year of manufacture: June 1965, original purchase price: 267,045 DM Travel ranges: Longitudinal (X): 1,600 mm Vertical (Y): 1,200 mm Transverse (Z): 1,150 mm Dujdpfx Aaszilmrehew Spindle speed: 20 – 6,000 rpm Table size: 1,200 × 1,400 mm Table load capacity: max. 6 t

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Dujdpfxjywtxbo Aahew Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: used, Year of construction: 1971, Technical details: max. diameter of face turning: ca. Ø 900 mm revolution per minute: Spindel: 12,5 - 00 / 24 step U/min revolution per minute: Planscheibe: 8 - 190 / 12 step U/min feed steps: Planscheibe: 0,03 - 3 / step rapid traverse: alle Bewegungen: 2000 / 4000 m/min tool taper: der Arbeitsspindel: ISO 50 / SK50 table clamping surface:: 700 x 800 table rotating: 360° Grad drill table adjustment: quer: 800 mm max. table load: 1500 kg total power requirement: ca. 11,0 kW weight of the machine ca.: 7800 kg Dedju Idtpopfx Aahouw dimension machine xH: 3,0 x 2,0 x 2,6 m dimensions electric cabinet: 1800 x 400 x 1950 mm Ø of the face plate 420mm Movement of the face slide 180mm largest Ø during facing approx. 900mm Longitudinal movement of the column 700mm Vertical movement of the headstock 700mm Feed drive of column, headstock and clamping table: -for spindle operation=0,20 - 10 mm/rev with 34 speeds -for operation with faceplate= 0,16 - 16 mm/rev with speeds Equipment: optical fine measuring device/measuring system for axes X/Y/Z/B-axis hydraulics machine feet/footplates control panel with boom *

Condition: ready for operation (used), KNUTH GBF 30 / Drilling and Milling Machine -Digital display -Year of manufacture 1986 -Max. drilling capacity / steel 32mm -Speed range 100 - 2900 rpm -Speed stages 100/205/345/440/695/885/1450/2900 rpm Duedpfjzkrmbjx Aahjw -Cross slide with T-slots -Manual quill -Height-adjustable drilling head -Drilling/milling head can be swivelled -Drill chuck Dimensions: L x W x H 0.9 x 0.7 x 1.8 meters / 550 kg Errors and omissions excepted.

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Duodpfx Aaswuz Dgjhow Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 4.4 kW (5.98 HP), Schiatti Angelo FPD60 Bohrmaschine doppelseitig Dsdewd Ertspfx Aahouw Max. width: 1.100 / 1.300 / 1.600 mm Glasthickness: 2-28 mm Max. Drilling Diameter 3-100 (automatic) 3-200 mm (manuell) RPM: 200 - 4500 U/Min frequenzy controlled Electric consumption: 4,4 KW

Condition: good (used), Code: 0311 Brand: CIT MECCANICA Model: V 25 / KS Fully automatic and very precise sharpening and setting machine for band saw blades (normal and spaced teeth) and for sharpening for circular saw blades Technical features Minimum pitch of saw teeth 2 mm Maximum pitch of saw teeth 20 mm Maximum width of bandsaw blades 50 mm Minimum diameter of circular blades 110 mm Dsdpjynkt Asfx Aahjuw Maximum diameter of circular blades 600 mm Grinding motor 0,12 Kw Main motor 0,20/0,25 Kw Teeth sharpened per min 35 and 70 Diameter of emery wheels 175 mm Speed of grinding wheel 3000 rpm Gear-box oil SAE 30 1,5 Kg Weight 115 kg

Condition: excellent (used), functionality: fully functional, Detel M-35 multi-spindle drilling machine Dsdpfx Aaozh U Hlehsuw Number of spindles: 35 Spindle spacing: 32 mm Distance between extreme spindles: 1088 mm Drilling depth: up to 90 mm Vertical and horizontal drilling capability 4 pneumatic material clamps Drilling speed adjustment Motor power: 2 x 1.4 kW

Condition: used, functionality: unexamined, Year of construction: 2011, operating hours: 1,000 h, machine/vehicle number: 55991101, This CNC machine is suitable for drilling stone, granite, and concrete. It is designed for drilling holes for KEIL anchors and can be adapted to accelerate the machining process. It can also operate with two drilling heads simultaneously. The drilling head can be replaced, allowing it to be used with other materials. Dodpfxozkhz Uj Aahouw I can also send videos of the machining process. The machine can be viewed in Znojmo, at Dyji 74.

Condition: used, Year of construction: 2021, functionality: fully functional, Milwaukee Cordless Diamond Core Drill MXF DCD150-302C — Year of manufacture 2021 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Cordless diamond core drill with max. drilling diameter up to 150 mm. Ideal for installation work in concrete and masonry. Condition & Notes: - Condition: Used, ex-rental, regularly serviced Dujdey A E Ulepfx Aahow - Functionality: Fully operational - Product images are sample photos showing the machine in new condition — actual condition varies depending on duration of use - On-site inspection in 37574 Einbeck available by appointment Price EUR 2,100 plus VAT | EXW Einbeck | Delivery upon request

Condition: new, bore capacity in steel St 60 30 mm bore capacity in cast iron GG 20 30 mm Drilling capacity in St 60 30 mm threading in St 60 M 16 threading in GG 20 M 20 Short spindle MK 3 spindle stroke 140 mm throat 293 mm column diameter 115 mm Dodeyvvn Nepfx Aaheuw Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 132 / 724 mm feed von Hand spindle turning speed - stepless 100 - 1.800 U/min total power requirement 1,0/1,6 kW weight of the machine ca. 260 kg

Condition: new, bore capacity in steel St 60 30 mm bore capacity in cast iron GG 20 30 mm Drilling capacity in St 60 30 mm threading in St 60 M 16 threading in GG 20 M 20 Short spindle MK 3 spindle stroke 140 mm Dusdpfx Ajyvvmxeahsw throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 132 / 724 mm feed von Hand spindle turning speed - stepless 225 - 4300 U/min total power requirement 1,0/1,6 kW weight of the machine ca. 260 kg

Condition: new, 40 mm threading in St 60 M24 threading in GG 20 M30 Short spindle MK 3 spindle turning speed - stepless 160 - 2250 U/min Center of spindle to wall or column 293 mm Column diameter 115 mm spindle stroke 120 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117/701 mm feed 0,10 + 0,20 mm/U Motor output 1,45 / 1,9 kW height of the machine ca. 1840 mm weight of the machine ca. 285 kg Dedpjyvvmrsfx Aahouw

Condition: used, Year of construction: 2008, bore capacity in steel (diameter) 32 mm throat 232 mm Dujdpfx Aaeyv N Dqjhow bore stroke 150 mm Spindle Speed 115 - 2470 U/min. tool adaptor MK 3 weight of the machine ca. 280 kg dimensions of the machine ca. 500 x 950 x 1800 mm

Condition: used, Year of construction: 1999, Technical details: Dodpozh Nliofx Aahsuw total power requirement: 2.2 kW bore spindle turning speed range: 70-4000 in 4 stufen U/min

Condition: new, CATALOG NUMBER: M0261 TECHNICAL DATA Number of spindles: 21 Distance between first and last drill: 640 mm Distance between spindle centers: 32 mm Max. workpiece size: 50 x 915 x 3000 mm Max. drilling depth: 65 mm Number of pneumatic clamps: 2 Working table height: 860 mm Max. clamp height above table: 70 mm Working pressure: 6-7 bar Air consumption: 10 l/cycle Motor power: 1.5 kW Noise level: 76.1 dB Spindle speed: 2800 rpm Dimensions (L/W/H): 1030/1030/1285 mm Weight: 275 kg PRODUCT FEATURES Main machine features: - Single-head boring machine, drilling range 0 - 90 ° - Pneumatically adjustable head inclination angle - Cast iron fences - Spindles adapted for quick-connect couplings - Patented pneumatic workpiece clamps - Cast iron work table - Fast and precise adjustment - Accurate drilling - Made in Italy Standard equipment: - 2 aluminum rulers, 1.5 m each (right and left) with two stops - 5 quick couplings - Wooden box for secure transport of the machine Duodpszh Ikkefx Aahsw ADVANTAGES - Drilling vertically, horizontally, or at an angle - Multi-spindle - Brand new machine - CE certified - Robust and professional Net price: 13,800 PLN Net price: 3,330 EUR Net price calculated at an exchange rate of 4.15 PLN/EUR (prices may vary in case of significant exchange rate fluctuations) - We ship machines to every part of the country - Possibility to trade in another machine as part payment The prices provided are net prices. Net price applies to international transactions and EU customers with a valid EU VAT number. Before placing an order for a new product, please confirm availability and current price.