Used Draw Press for sale (13,927)

Condition: used, Year of construction: 2009, Extraction diameter: 250 mm Rated volumetric flow: 3534 m³/h Filter area: 22.6 m² Motor: 5.5 kW Briquetting: throughput approx.: 30 kg/h Briquette diameter: 65 mm Motor: 3.0 kW Storage location: Nattheim Dsdpfjyym A Sex Ab Tskp

Condition: excellent (used), ABBA ALBAMAT 900 V5-Z1 – Fully automatic channel baler – 90 t pressing force Manufacturer: ABBA Pressentechnik Type: ALBAMAT 900 V5-Z1 The machine is in very good, fully functional condition and is available immediately. An inspection and test run can be arranged. The ABBA ALBAMAT 900 V5-Z1 is a powerful, fully automatic channel baler for high throughput and is ideally suited for compressing a wide variety of recyclable materials. Suitable for: * Cardboard * Waste paper * Corrugated cardboard * Printing waste * Plastics (PET, HDPE, etc.) * Films * Aluminum and tinplate cans * Wood shavings * Glass wool * Shrubbery cuttings Equipment * 90 t pressing force * 1 main press cylinder Dksdezil S Uspfx Ab Top * Large feed opening * 5-point fully automatic vertical wire tying * Hydraulically automatic 3-sided channel adjustment * Hardox press bed * Hardox piston guide with wear-resistant guide strips * High-performance cooler * Control cabinet and tank heating * 10 different press programs * 5.7” touchscreen operation * Floor and piston slides to protect the tying unit Technical data * Pressing force: 90 t (900 kN) * Feed opening: 1,140 × 1,700 mm * Bale dimensions: approx. 1,080 × 1,100 × up to 1,200 mm * Bale weight paper/cardboard: approx. 500–750 kg (material dependent) * Drive power: 90 kW * Throughput cardboard (35 kg/m³): up to approx. 10 t/h * Flow rate at idle: 698 m³/h * Flow rate under operating conditions: 543 m³/h * Cycle time: 16 seconds * Specific pressing force: 76 N/cm² * Machine weight: approx. 24,000 kg Available for immediate delivery. Transport and loading can also be arranged upon request.

Condition: good (used), Code: 0120 Brand: ORMAMACCHINE Model: NPC/3000S - CE Standard Dsdpfxszil Ipo Ab Tekp Hot press for wood, veneer, wood panels, coated panels, veneer, composite materials, cork, aluminium and various materials - CE Standard Platen dimensions mm 3000 x 1300 Thrust ton 70 N° 6 pistons Opening mm 400 Motor Hp 2 Hot water heating by boiler Overall dimensions: mm 3600 x 1550 x 1900 h Weight kg 3500

Condition: good (used), Year of construction: 1989, functionality: fully functional, The machine is explicitly sold as a defective unit for spare parts. Pressing force: 50 t Bending length: 2085 mm Dsdpfx Abszil Eho Tjkp Distance between uprights: 1690 mm Stroke: 105 mm Overhang: 400 mm Table height: 960 mm Total power requirement: 6.5 kW Machine weight: approx. 3,450 kg Space requirement: approx. 2500x1800x2200 mm

Condition: new, 3 drive wheels, Passat Dkedpjy Uku Ijfx Ab Tsp 230/75 -120LZ-L

Condition: ready for operation (used), 3-panel Passat dryer Dodpfoy Ukuzex Ab Tskp 1 is new 2 are used

Condition: refurbished (used), Year of construction: 1979, For 75T working length 2500mm Dkjdpfxoxwxg Ie Ab Tjp

Condition: used, Year of construction: 2010, 2 x Amada Astro HDS 1030/NTR press brakes, year of manufacture 2010, and Amada Astro III press brake, year of manufacture 2013. Dsdpfx Ajy Em Uljb Tokp

Condition: good (used), Pressing force: 40 tons Table surface area: 590 x 1000 mm Djdpozkrmnjfx Ab Tskp Ram surface area: 590 x 1000 mm Stroke: 900 mm Table is extendable, ram plate is swiveling.

Condition: good (used), Year of construction: 1992, SCHROEDER mosaic press 160mm. Bonding patterns: line: - square plate 640x320 mm - parallel parallel plate 640x320 mm Dodpfx Absr Iyrme Tskp

Condition: used, Thermopatch Type: NL-15-SQR/R The NL-15-SQR/R is a sophisticated combination of advanced technology and modern, ergonomic design. The device heats up quickly and automatically switches to energy-saving mode when needed. The NL-15-SQR/R operates exclusively with compressed air and is the all-in-one solution for any application. The display is user-friendly. Intended use: This heat sealing press is particularly suitable for industrial applications where precise temperature control and the ability to use smaller sealing plates (140 x 140 mm) are required. Common applications include applying patches, transfers, or embroidery to textiles. Special features: Robust and durable: The machine is designed for intensive use and is popular in the textile industry as well as in other industries that require high volumes with medium to high temperature processing. High flexibility: The temperature range of 25 to 210 °C and the adjustable timer from 1 to 240 seconds offer flexibility for a variety of materials and applications. Efficient: The air pressure range of 3 to 6 bar and the air consumption of 3.01 liters per cycle make the machine efficient in operation. The Thermopatch NL-15-SQR/R is an industrial heat sealing press with the following technical specifications: Technical data: Power supply: 240 V Maximum power: 800 W Temperature range: 25 – 210 °C Timer: 1 – 240 seconds Dimensions (H x W x D): 470 x 540 x 470 mm Sealing plate (millimeters): 140 x 140 mm Noise level: < 70 dB Air pressure range: 3 – 6 bar Air consumption per cycle at 5 bar: 3.01 l Weight: 59 kg Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and information are subject to change!) Dkodeziivqjpfx Ab Tep We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2001, operating hours: 13,030 h, machine/vehicle number: 090038, punching force: 2,200 t, We are offering our Trumatic 5000R laser punch press for sale. The machine is used and in very good condition. Basic data from the type plate: Max cutting force: 220 kN Type 9121 No. 090038 Year of manufacture: 2001, spare parts Network: 400 V/50 Hz Connected load: 29kVA Supply voltage: 400V Control voltage: 24V= Necessary protection: 3x50A Compressed air connection: 7-14 bar Machine weight: 17500kg Main features of the machine: - Tool rail - 21 tools and 4 handles - working area 3070x1660mm - max. sheet thickness 8mm - Rotation axis of the tool head C1 and C2 - Forming function - Thread function - Multibend function - Pneumatic press - automatic sliding of the details 500x500mm - water-cooled servomotors Additional equipment of the machine: - light barrier Softpunch function - Details slide sensor - Device for blowing out small details - System for chip extraction Djdpfx Abeunh D Dj Tjkp - Separate lubrication of punching and threading tools Number of NC units: 13030h We sell machines without tools. Machine regularly maintained by authorized Trumpf service with original spare parts, last machine maintenance on 21.02.2024r.

Condition: ready for operation (used), Year of construction: 2009, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2009 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening: 119.5 x 65 cm Condition: very good! Dkodpfezkp E Iox Ab Tep Video of machine in operation available on request.

Condition: used, Year of construction: 2021, controller model: LVD Touch-B, _____ Description: Year of manuf. : 2021 Control : LVD Touch-B Working length : 3050 mm Pressing force : 1350 kN Dsdpfxezig Tge Ab Tekp Technical Specifications Pressing force:1350 kN Bending length:3050 mm Usable installation height:400 mm Column clearance:2600 mm Control system:Touch-B Weight:9600 kg Features Axis Stop:CNC axis stop with 2 fingers Angle Measurement System:LVD Easy-Form Laser Support Brackets:2 pieces Safety System:Optical laser system included Foot Switch:Yes Touchscreen:Yes

Condition: used, Year of construction: 2007, Bystronic AFM EP 31-160 - CNC Press Brake Bending length: 3100 mm Capacity: 160 t - Cybelec DNC 880S CNC control - Laser safety device - Hydraulic crowning - Air bending - incl. many tools - incl. operating manual - Operating hours: 7266 - Bending cycles: 315673 - Year of manufacture: 2007 Technical data - Capacity: 160 t - Table length: 3150 mm - Work table width: 60 mm - Working height: 920 mm - Distance between side frames: 2450 mm - Overhang: 300 mm - Opening height: 465 mm - Number of cylinders: 2 - Stroke: 200 mm - Approach speed: 100 mm/s - Bending speed: 9.8 mm/s - Retraction speed: 95 mm/s - Tilting of the upper beam: +/- 13 mm Dsdoziduzspfx Ab Tekp - Crowning: Hydraulic - Air bending: Yes - Adjustment of the upper tool: Manual - Adjustment of the die: Manual - Number of fingers on the ram: 2 - X-axis travel of the ram: 600 mm - X-axis movement: 600 mm - Min. X-axis movement speed: 400 mm/s - R-axis movement: 150 mm - R-axis traverse speed: 150 mm/s - Z1-Z2 movement: 2400 mm - Z1-Z2 traverse speed: Manual - Accuracy of the X-axis: 0.1 mm - Accuracy of the Y-axis: 0.01 mm - Accuracy R-Z1-Z2: 0.1 mm - Accuracy Z1-Z2: Manual - Above-floor installation: Yes - Machine dimensions WxHxD: 4100 x 2680 x 2200 mm - Motor power: 15 kW - Machine weight: 9400 kg

Condition: used, Year of construction: 1980, Technical details: pressure: ca. 100 t distance between columns: 500 mm throat: bis Mitte Stößel / up to center ram: 350 mm dayligth: 450+100 mm min. ram stroke: 26 mm max. ram stroke: 152 mm Dkjdpfx Absu Nfhdo Tjp ram adjustment: möglich/possible mm ram surface area: 550 x 400 mm clamping table: 1020 x 710 mm total power requirement: 10 kW weight of the machine ca.: ca.7 t space requirement approx.:: L:2,0 x B:1,7 x H:3,2 m WITHOUT drawing cushion Can be demonstrated in idle run. i.D. *

Condition: used, Year of construction: 1978, used good condition cleaned functionality tested Dksdpfxozkl Ifj Ab Tjp Manufacturer: Bürkle Type: U 88 Year of manufacture: 1978 Machine no.: 3102629 Safety tested (GS certified) Touch control Safety cable on top Electric heating Specific maximum pressing force: 80 t Aluminum plates glued Lower piston Quantity: 6 Plate size approx. mm: 2550 x 1300 Opening width approx. mm: 400 Piston diameter: 70 Space requirement approx. L x W x H approx. mm: 3100 x 1500 x 1900 Weight approx. kg: 4000 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: used, Year of construction: 1994, operating hours: 28,000 h, functionality: fully functional, The Bruderer BSTA 80H is an 80-ton high-speed stamping press built for heavy-duty progressive-die production, fitted with a BBV 320/200 strip feeder and Unidor tool monitoring. In stock in Pforzheim, ready for inspection. Nominal force: 800 kN (80 tons) Tool monitoring: Unidor Stroke rate: 100–1,000 spm Strip feeder: Bruderer BBV 320/200 Adjustable stroke: 16–63 mm Djdpfozibtbjx Ab Tjkp Clamping plate area: 970 mm Main drive: 43 kW Power supply: 380 V / 50 Hz Ram area: 760 x 510 mm Table area: 950 x 910 mm Strip inlet height (adjustable): 80–180 mm Max. strip width: 360 mm Max. material thickness: 3 mm Machine dimensions: 2834 x 1742 x 3460 mm Weight: approx. 15,550 kg Operating hours (main drive): approx. 28,067 h More machines from brands Bruderer, Bihler, Soprem, Noxon, Huras, Schaal and Mabu on stock available on request

Condition: excellent (used), Year of construction: 2007, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 1541, total width: 2,000 mm, total height: 2,500 mm, total length: 30,000 mm, briquette diameter: 90 mm, overall weight: 6,000 kg, Equipment: CE marking, type plate available, Complete production line for cylindrical briquettes, Ø 90 mm. The line includes a Di Più BRIK MB90 briquetting press, an input sawdust conveyor, a briquette cooling tower, a briquette cutter, a briquette sorting conveyor, a shrinking tunnel (packaging machine), and an output roller conveyor. Dedsy U D Uuopfx Ab Tjkp

Condition: used, Year of construction: 1995, operating hours: 42,000 h, functionality: fully functional, machine/vehicle number: 10317, The BSTA 50UL is a Bruderer high-speed precision stamping press rated at 500 kN (50 tons) nominal force, engineered for continuous progressive-die production at variable stroke rates from 100 to 1,120 strokes per minute. The press is equipped with a Bruderer BBV 202/120 strip feeder, delivering strip widths up to 203 mm and handling material thicknesses up to 2 mm. Adjustable stroke is set between 16 and 51 mm, with strip inlet height adjustable across a 50–140 mm range to accommodate varying tooling and material profiles. Nominal force: 500 kN (50 tons) Tool monitoring: Unidor Stroke rate: 100–1120 strokes per minute (variable) Strip feeder: Bruderer BBV 202/120 Adjustable stroke: 16–51 mm Mounting space / clamping plate: 760–940 mm Main drive: 22 kW Power supply: 400 V / 50 Hz Table area: 940 x 580 mm Strip inlet height (adjustable): 50–140 mm Max. strip width: 203 mm Max. material thickness: 2 mm Machine dimensions: 3100 x 2700 x 1800 mm Weight: approx. 8,150 kg Djdszibrqopfx Ab Tekp Operating hours: 42,416 h Sound-insulating cabin available on request More machines from brands Bruderer, Bihler, Soprem, Noxon, Huras, Schaal and Mabu on stock available on reqest

Condition: used, Year of construction: 1994, functionality: fully functional, table length: 950 mm, table width: 650 mm, pressing force: 50 t, stroke length: 51 mm, Bruderer BSTA 50EL - Tool loading area 950mm L-R - Machine will be mechanically overhauled Dsdpfx Aezkk Azob Tekp - Roll feed BBV 202/120 Please contact us for a detailed quotation!

Condition: used, Year of construction: 2000, functionality: fully functional, table length: 950 mm, table width: 650 mm, pressing force: 50 t, stroke length: 51 mm, Bruderer BSTA 50UL Dkjdozkkxcspfx Ab Tep - Tool loading area 950mm L-R - Machine will be mechanically overhauled - Roll feed BBV 202/120 Please contact us for a detailed quotation!

Condition: new, Year of construction: 2026, operating hours: 8 h, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% Dkodpfx Aexfwdsb Tep - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Year of construction: 2021, condition: excellent (used), functionality: fully functional, REF: MM6366 1 x Zumex cold-press commercial juicer. Complete with juice bags, alternative blades and all the necessary accessories. Suitable for soft fruit, hard fruit, vegetable greens or a mix of those three products. Manufacturer - Zumex Food Engineering. Model - MASTERY. Date of manufacture - 2021. The Mastery represents Zumex’s cold press commercial system for all types of fruit and vegetable juices, leading the way with its crushing efficiency and power, thanks to its shredder discs and its Brushless motor. It also has a 11-ton press, which is more compact than any other press of its category to obtain quality juice. Production capacity - from 30 L/h up to 110 L/H. Deposit capacity - 3 litres. Touch Control Display - 4.3" Colour. Pression Power - 11,000 kg. Dksdpfx Aeyh I Tkjb Top Electrical requirements - 220-240 V / 50 hz / 1 phase.

Condition: excellent (used), Year of construction: 1979, power: 38 kW (51.67 HP), stroke length: 400 mm, table width: 1,320 mm, table length: 1,000 mm, total height: 6,300 mm, distance between stands: 1,000 mm, ram adjustment: 200 mm, Trimming press ERFURT type PKZ 400/1000 Capacity, ton 400 Stroke 400 mm Table size (left to right) 1000 mm Table size (front to back) 1320 mm Ram (left to right) 800 mm Ram (front to back) 1060 mm Ram adjustment 200 mm Strokes 18 min-1 Shut height 685 mm Upper ejector: power 20 t, stroke 125 mm Driving power 32 kW Driving power overall 38 kW Required space 2550 x 2700 mm Height of machine above floor 6300 mm Dedelnlpxepfx Ab Tjkp Weight without bottom ejector 33,8 t Total weight 38,5 t