Used Dowel Drilling Machine for sale (65,377)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Drilling / Milling Machine KNUTH MARK SUPER SV Year of construction: 2021 Travel X: 560 mm Travel Y: 190 mm Travel Z: 400 mm Spindle: CM4 Spindle exit: 120 mm Spindle speed: from 75 to 2500 RPM Table size: 800 x 240 mm Tilting head Scale 3 axes Electronic speed variator Automatic head up/down Automatic X axe travel Manual Y axe travel Supplied with many accessories: Boring heads, clamps holders, etc (see photos) Voltage: 380 V Length: 1400 mm Tjdpfx Aezqtc Rjmyea Depth: 1200 mm Height: 2000 mm Weight: approx 500 KG

Condition: used, High-performance drilling machine ALZMETALL, type Abomat 20 Production drilling machine Serial No. 452, Year of manufacture 1996 Drilling capacity in steel ST 60: 25 mm Drilling capacity in cast iron GG 20: 30 mm Spindle mount: SK 40 - M16 Overhang: 280 mm Drill slide stroke: 500 mm Distance from spindle nose to table: 185 - 685 mm Table size: 490 x 400 mm Spindle speed: 50 - 500 rpm, infinitely variable Drill slide feed: 20 - 224 mm/min, infinitely variable Drill slide rapid traverse: 4.5 m/min Feed motor power: 0.18 kW Tjdsikrtqspfx Amyoa Rapid traverse motor power: 0.75 kW Drill spindle motor power: 1.1 kW (speed 1000 rpm) Mains connection: 400 volts, 50 Hz - Spindle speed infinitely variable via frequency inverter - Drill slide feed infinitely variable via frequency inverter - 2 operating modes: setup and automatic operation - Central lubrication - Control cabinet on the back of the machine - Swiveling control panel - Mounted on a steel plate (700 x 650 x 40 mm) with precise height adjustment Space requirement L x W x H: 1200 x 700 x 2530 mm Weight: approx. 1000 kg Good condition

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 10 m/min, workpiece weight (max.): 20,000 kg, Travel X-axis – Longitudinal column: 8,000 mm Y-axis – Vertical: 2,500 mm Z-axis – Ram extension: 1,000 mm W-axis – Spindle extension: 800 mm Headstock Spindle diameter: 150 mm Revolutions: 2,500 rpm Power: 40 kW Ram section: 460x520 mm Rapid traverse X and Y axes: 20 m/min Z-axis: 10 m/min MG 20 rotary table Todpfx Amszqlgzsyja Table dimensions: 1,600x2,000 mm Longitudinal movement, travel: 1,500 mm Maximum centered load capacity: 20 tons Accessories Automatic indexing headstock 1ºx1º (Power 37 kW) Heidenhain measuring scales on all axes Operator platform Chip conveyor Floor plates (2 units)

Condition: excellent (used), Year of construction: 2010, Maximum drilling diameter: 20 - 252 mm Drilling diameter in concrete: 20 - 202 mm Number of speeds: 3 Electrical connection: 220 V, 2300 W Weight: 7.4 kg Tsdpfx Aoznvrpsmyja

Condition: used, Year of construction: 1988, Radial drilling machine Manufacturer: Tai Pin Type: TPR 1230 Year of manufacture: 1988 Drilling capacity in steel: Ø 42 mm Drilling capacity in cast iron: Ø 55 mm Thread cutting (steel/cast iron): M25 / M38 Overhang (column to spindle center): 330 – 1,230 mm Spindle stock travel: 880 mm Column diameter: 300 mm Tool holder: MK 4 (Morse taper 4) Quill stroke (spindle stroke): 270 mm Spindle speeds: 12 steps, 37 – 1,253 rpm (at 50 Hz) Automatic feeds: 3 steps (0.05 / 0.09 / 0.15 mm/rev) Distance spindle – base plate: 467 – 1,360 mm Tsdpeznvibjfx Amyoa Outrigger height adjustment: 620 mm 23726

Condition: used, machine/vehicle number: 008689, X axis working area: 6735 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 65 mm Tsdpfx Amoznuxbsyja Total number of drilling spindles: 30 Total number of tool changer positions: 22

Condition: used, Universal Milling Machine DECKEL Type FP 1 Universal milling machine Machine No. 2101 – Year of manufacture: 1979 Manual travel X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Tjdpfx Amsr U St Usyoa Spindle speed: 40–2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.5 and 1.9 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at the vertical milling head: 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated in the machine base - Standalone control cabinet - Original chip tray for mounting on the machine base - Electrical schematic available Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg Good condition

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer Tedpfxou Tln Ne Amyea - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: used, Univ. universal milling machine DECKEL, Type FP 1 Machine No. 28317, Year of manufacture approx. 1960 Travel distances: X: 245 mm, Y: 150 mm, Z: 340 mm Table size: 600 x 210 mm Spindle mount, horizontal: MK 4 - S20 x 2 Spindle speed, vertical: 95-1900 rpm, 12 steps Spindle speed, horizontal: 60-1200 rpm, 12 steps Motor power: 0.8 and 1.1 kW, pole-changing Power connection: 380 Volt, 50 Hz - Spindle speed controlled via 2 motor speeds and 6 gear stages - Feed in the X and Z axes - Coolant system with mechanical pump in the machine base Tjdpfxjiy Ekvj Amyja - Quill travel on the vertical milling head: 60 mm - Vertical milling head swivels +/- 90° - Metal substructure made of angle iron with machine feet Space requirement L x W x H: 1100 x 900 x 1650 mm Weight: 650 kg Good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame Tsdpfjhik Ezex Amyja - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: used, Univ. universal tool milling machine DECKEL, Type FP 1 Machine No. 51265, Year of manufacture approx. 1967 Travel distances X: 300 mm, Y: 150 mm, Z: 340 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20 x 2 Spindle speed 40-2000 rpm, 16 speeds Motor power 1.0 and 1.6 kW, pole-changing Mains connection 380 volts, 50 Hz - Feed in the X and Z axes Tjdsghtvaepfx Amyja - Spindle speed via 2 motor speeds and 8 gear stages - Quill movement on the vertical milling head 60 mm - Swivel, rotary, and tilting angle table - Coolant pump in the machine base - Adjacent control cabinet Space required L x W x H 1100 x 1100 x 1600 mm Weight 690 kg Good condition

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm Tjdpfer D T U Dox Amyja - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Condition: good (used), Year of construction: 1990, Unit with side support table External dimensions of drilling machine: Height: 1700 mm Width: 700 mm Depth: 1500 mm Weight: approx. 320 kg External dimensions of the side table: Height: 1100 mm Width: 2600 mm Tedpfozqfv Nsx Amyea Depth: 1410 mm Condition: good, second-hand

Condition: good (used), Year of construction: 2015, bore capacity in steel (diameter) 40.0 / 50.0 mm throat 300 mm Tsdpfx Amjznng Esysa bore stroke 160 mm turning speeds 100 - 1600 U/min table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm engine output 1.8 / 2.9 kW weight 450 kg Current list price: approx. 20,000 euros Special price available upon request Features: - Heavy-duty column drill press * Drive: V-belt - VARIO - Automatic spindle feed * with electromagnetic feed clutch * and electric cross-handle control - 4x feed rates: 0.1/0.2/0.3/0.4 mm/rev - stepless speed adjustment - Digital speed display - Pole-reversible drive motor - Right/left rotation of the drill spindle - Spindle guard with electrical safety lock - Coolant system with separate reservoir - User manual (PDF)

Condition: as good as new (ex-display), Year of construction: 2019, bore capacity in steel (diameter) 35,0 mm bore capacity in cast iron 40,0 mm threading M 24 in Stahl throat 320 mm morse taper 4 MK bore stroke 160 mm turning speeds 65 - 3250 U/min table: 500 x 420 mm throat 320 mm weight 375 kg range L-W-H 600 x 870 x 2.170 mm 2019 showroom model (!!) Approx. 1 hour of operation Special price on request Furnishing: - Infinitely variable speed, ideal for - Set the desired cutting speed. - Automatic tool ejector and thread cutting device as standard - Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev - Solid gray cast iron table with rotating and swiveling support surface - T-slots in the machine base enable high workpieces to be clamped Tjdpfx Amexaabrjyea - Guaranteed concentricity 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth running - Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, MT 4/2 - coolant device - Thread cutting device - Electromagnetic spindle feed - Automatic tool ejector - LED machine light - First filling with Shell Tellus 46 - Digital speed display - Height-adjustable protective cover

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 9211/4747, input frequency: 50 Hz, working width: 1,300 mm, total width: 2,500 mm, total length: 4,000 mm, total height: 2,500 mm, For sale is a German woodworking machine from Gerhard Koch Maschinenfabrik (Bielefeld, Germany), model SBD-B, manufactured in 1992. It is a through-feed machine, specifically a Säge-Bohr-Dübeleintreibautomat – meaning it performs sawing, drilling, and dowel insertion. It is ideal for producing furniture components, window frames, doors, and other wooden profiles that require precise dowel joining. Technical data: Year of manufacture: 1992 Serial number: 9211/4747 Rated power: 17 kW Power supply: 220 V, 3-phase, 50 Hz Maximum operating current: 69 A Pneumatic system: max. 7 bar Electrical diagram: 652/2 Number of heads: 6 Tedszqbv Ejpfx Amyja This machine is robust, of German manufacture, and features a proven design that has been used in the furniture industry and carpentry for many years, since the 1990s. A PLC module is included, which facilitates quick changeovers and performance measurement, as well as error reporting.

Condition: ready for operation (used), Year of construction: 2002, Professional, heavy-duty version by HANG (German quality) in neat, complete condition. Highly suitable for binderies, printing shops, and print departments. ⸻ Specifications • Brand / Model: HANG 107-30 electronic • Serial number: 102553 • Year of manufacture: 2002 • Number of drilling heads: 4 pieces, individually adjustable • Electronic control, automatic drilling cycle • Power connection: 400V – 50Hz – 6A • CE certification present • Cast iron frame, extremely robust construction • Manual and automatic operation • Adjustable stops with fine adjustment • Machine is mounted on swivel casters (easily movable) ⸻ Condition • Removed from production in working order • Drill spindles and guides run smoothly • No damages, normal signs of use • Immediately ready for operation • Complete, as shown in the photos ⸻ Description The HANG 107-30 is one of the most robust paper drilling machines on the market. Heavier-duty and more professional version than the standard models, thanks to the sturdy drilling heads, automatic drilling cycle, and reliable electronic control system. Perfect for calendar production, book blocks, brochures, index tabs, and more. ⸻ Price 👉 € 3,250 net (0% VAT export possible) Tedpfox A Izlex Amyoa

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, New machine, purchased in 2020. Ideal for: Furniture manufacturing Kitchen manufacturing Carpenters/joiners Series drilling for Blum fittings and hinges Technical specifications: 3 x 400 V 1.1 kW Tedpfx Amsznkufeyja Professional industrial version The machine comes from a workshop liquidation. Scope of delivery: Machine Stops/accessories, base frame as shown in the pictures Operating manual Inspection/test run possible by arrangement.

Condition: used, machine/vehicle number: 008692, Max. panel width: 3000 mm Max. panel length: 1300 mm Tjdpfxjznkqmj Amysa No of Top Units: 1 No of injectors: 1 Positioning of Units by NC: yes

Condition: good (used), Code: 0318 Brand: BIESSE Model: F 39 E - CE Standard Electronic multiple boring machine with 39 spindles for furniture, carpentry, custom-made furnishings, panels, kitchens, bathroom furniture, doors,window frames, and various - CE Standard Suitable for horizontal and vertical drilling, any intermediate drilling between 0 and 90° can be performed thanks to a gear motor and handwheel. Electronic control Technical data: N° 39 spindles Spindle rotation speed 4000 rpm Center distance between spindles 32 mm Max drilling center distance 1216 mm Drilling depth 65 mm Drilling head motor power 2,3 + 2,3 Hp Air operating pressure 6 bar Installed electrical power 4,1 Kw Overall dimensions mm 1800 x 1140 x 1600 h Weight kg 700 Todpfxey Tt Rpe Amyja MACHINE SOLD UNDER THE CONDITIONS IN WHICH IT IS FOUND NOT RECONDITIONED

Condition: used, RADIAL CSEPEL Tjdpfsriu Eysx Amysa TYPE: RF50/1600 TYPE: RF50/1250 20 AVAILABLE PIECES

Condition: used, Year of construction: 2005, functionality: fully functional, empty load weight: 1,300 kg, Horizontal drilling/pushing rig, complete with numerous extension rods. Tjdpfezp Sa Eox Amyea Bohrtec PZ 120/80. Year of manufacture: 2005. Weight: 1300 kg. Pushing force: 1200 kN. Pulling force: 800 kN. Length: 325 cm. Width: 60 cm. 46 x extension rod, 100 cm long, 22 cm diameter. 72 x extension rod, 100 cm long, 6 cm diameter. Crate with couplings and various accessories. See photos. Price net + 21% VAT or net for export. Calling or sending a WhatsApp message is the fastest way to contact us. We speak Dutch. We speak German. We speak English.

Condition: excellent (used), Year of construction: 2022, CNC through-feed drilling machine KD-612KHSA, year 2022 -3 independent drilling units -Spindles: 26 vertical, 12 horizontal (top), 9 horizontal (bottom) -2 routing units (top 5.5 kW, bottom 3.5 kW) + 2 grooving saws -KDT control software, Dell PC, Windows environment -Automatic barcode scanner -Simulator module -2 feed grippers Todpfxjwutrij Amyea -Side automatic pressure unit -Waste conveyor belt Price is without VAT.

Condition: good (used), Year of construction: 2019, In stock is a well-preserved CNC doweling machine STARTECH CN Plus. The price is excluding VAT. Tedpfxjwtnluj Amyoa

Condition: good (used), Year of construction: 1980, machine/vehicle number: 622336, Offer 22681 Technical Data: Tjdjzp E Ucopfx Amyja - Drilling capacity in steel ST 60: 30 mm - Drill spindle mounting: MK 3 - Drill spindle stroke: 160 mm - 9 drill spindle speeds: 90 - 1450 rpm - Overhang: 300 mm - Table with 2 T-slots - Table dimensions: 400 x 450 mm - Max. distance table - drill spindle: 660 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 1.2 kW - Space requirement: approx. W 600 x H 2100 x D 850 mm - Weight: approx. 300 kg - Including: - Drill chuck - 10 HSS drill bits, 8 – 20 mm