Radial drilling machine

CSEPEL RF50/1600 & RF50/1250

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm Iedpfx Akjhzbipoxsia DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: ready for operation (used), Lathe Fabr Takisava Type TAL 510 with lathe chuck + quick-change holder + center punch Isdpfxevyuuqj Akxoia

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 10014777, overall weight: 1,300 kg, load capacity: 210 kg, arm reach: 2,696 mm, We offer industrial robots from the manufacturer KUKA. The scope of delivery includes the robot arm, control cabinet and the associated cables. The robots come from a functioning system and have been professionally dismantled. We carry out a functional test and check the robots. If you are interested, we offer the opportunity to demonstrate the functions to ensure that they meet your requirements. - Supplement at additional cost - We are pleased to be able to offer you a new function for our robots: The Siemens S7-1200 Profisafe safety controller. Isdpfsq Suwbox Akxsia With this controller, you can easily integrate an emergency stop function, a safety gate and a start-stop connection via the Profisafebus. The controller is fully configured and programmed so that you can implement a simple stand-alone solution with a robot and a safety fence. If required, we can also offer you additional support during commissioning. We grant a 14-day right of return. Further warranty services are excluded. We have an extensive stock of these robots and the prices quoted are package prices. Discounts are negotiable for larger order quantities. We invite you to contact us again to discuss further details. Sale exclusively to traders.

Condition: good (used), functionality: fully functional, machine/vehicle number: 804, roller length: 2,550 mm, working width: 2,500 mm, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, overall weight: 12,500 kg, 3-roll hydraulic plate bending machine 2500 x 16 mm Manufacturer: KUMLA Type: PV 7 H Serial no.: 804, overhauled in 1987 The machine is of a very robust design and has only been used in single-shift operation. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Iiedpfovxbm Rsx Akxja Cone bending device Top roll diameter: 324 mm Bottom roll diameter: 305 mm Hydraulic roll adjustment Dimensions: L x W x H = 5000 x 1600 x H 1900 mm Working height: 1000 mm Additionally, a staircase platform around the machine can be purchased.

Condition: used, Year of construction: 2007, Technical details: x-travel: 635 mm y-travel: 460 mm z-travel: 510 mm control: 3D Heidenhain i TNC 530 table-size: 790 x 560 mm table load capacity: 600 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. tool changer with: 20 place spindle hours: 36.050 h operating hours - idle run: 91.000 h total power requirement: 13,9 kW Weight approx.: 3,6 t tool taper: SK 40 range of revolution per miute: 20-10.000 U/min Iisdpfx Akow A I Uuoxsa Tool changer: 20-fach dimension machine xH: 3,0 x 2,0 x 2,15 m

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Iisdov Rpr Sspfx Akxea Control: HEIDENHAIN TNC 426 Travel X/Y/Z: 600 x 450 x 500 mm Swivel table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm

Condition: good (used), Year of construction: 1988, grinding length: 1,000 mm, grinding width: 550 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, grinding wheel width: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Year of manufacture: 12-1988 Isdpfsu Rqynox Akxeia Delivery time: immediately Electro-permanent magnetic clamping plate SAV 1000 X 400 mm Fine pole pitch 45-5 mm Electric straightening device with compensation Digital display vertical Holder with grinding wheel max. 400 X 100 X 127 mm Spindle motor 7.5 KW 1435 min/1 Setting wedges Coolant system with universal paper belt filter Complete documentation

Condition: used, Year of construction: 2016, Technical details: Ijdpfsudf Evsx Akxsia weight: 22 t

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 3,000 kg, Maximum Rotor Weight ---3000 kg (6613.87 lb) Minimum. Rotor Weight ---30 kg (66.14 lb) Maximum Rotor Diameter ---1400 mm (55.12 in) Minimum Shaft Diameter ---20 mm (0.79 in) Maximum Shaft Diameter ---300 mm (11.81 in) Motor power ---11 kW (14.75 HP) Isdpfx Aor Dd Avokxoia Drive Unit (Std.) ---11 kW (14.75 HP) Balancing Speed ---0-3000 Rpm (25 Hz) (up and down adjustable) Drive Unit --- Only Belt or Shaft / Belt + Shaft Bed length ---3000 mm (118.11 in)

Condition: ready for operation (used), Machine was overhauled and is fully functional, with documentation. Iisdpfx Akofw Az Usxoa