Used Dowel Drilling Machine for sale (65,357)

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment Especially designed for stair construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drillings, such as for balusters, can be easily accomplished with the swiveling drilling unit. Motor with pole switching, two speeds Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm Motor start via convenient handle switch Ppedpfx Aexmatnehvsp Equipped with Röhm two-jaw chuck, 1 - 20 mm Linear laser for precise workpiece positioning Drilling unit can swivel 65 degrees left and right Pneumatic adjustment of working height allows dowelling on two levels without repositioning. Desired drilling heights can be set for each drilling level via digital counter, switching between levels is pneumatic and operated from the front Cross adjustment 340 mm, infinitely variable or in 12 mm increments via indexing rail Pneumatic clamping possible at any point, operated from the front Maximum height adjustment approx. 100 mm above table height Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, 1 clamping column repositionable to the front 2 swiveling workpiece supports Extraction funnel Central stop + 1 side stop Fixed mitre stop Length stop as round rod Assorted drill bits Operating manual CE mark Machine was partly repainted due to paint splashes. Pneumatic hoses replaced Dimensions: approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be viewed and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Psdpfjvvi I Rsx Ahvopp

Condition: used, Year of construction: 2002, Drilling capacity: 25 mm, spindle mount: MK 3 Ppedpfx Ahovvi Auevep Storage location: Nattheim

Condition: excellent (used), incl. rollable table 380 VAC Drilling capacity in steel: max. approx. Ø 18 mm Spindle speed 1-stage: 240 / 420 / 675 / 1100 / 1900 rpm Spindle speed 2-stage: 480 / 840 / 1350 / 2200 / 3800 rpm Projection: 215 mm Tool holder: MK 2 Quill stroke: 90 mm Table clamping surface: 220 x 285 mm Pjdpfx Aheryn Sbjvepp Cross table travel X / Y: 160 x 180 mm Power requirement: 0.72 kW Weight: approx. 85 kg Dimensions W x D x H: approx. 800 x 900 x 1740 mm

Condition: used, machine/vehicle number: 008372, X axis working area: 4140 mm Y axis working area: 1850 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Maximum edge height: 65 mm Podpfxjylixls Ahvspp Total number of drilling spindles: 23 Total number of tool changer positions: 18

Condition: like new (used), Year of construction: 2012, Machine is completly refurbished by our technical staff Pedpfx Ahoxn T Smovspp

Condition: good (used), Drilling machine for window lock and hinge holes. Set composed of two machines. Price €600. Ppodpfsyw R Rusx Ahvep

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm throat 260 mm Ppsdpfx Aeuhhzhshvep bore stroke 120 mm number of spindle speeds 80-1400 min-1 table surface area 410 x 390 mm total power requirement 0,8/1,5 kW weight of the machine ca. 250 kg dimensions of the machine ca. 0,75 x 0,6 x 1,15 m

Condition: good (used), Year of construction: 1985, spindle turning speed - stepless 26 - 1650 U/min voltage 380 V 0 50 Hz rated current 15 A connected load 6,5 kW tool taper MK 4 weight of the machine ca. 2,3 t Podpfx Asvylh Ushvspp dimensions of the machine ca. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 35 mm throat 300 mm bore stroke 150 mm thread capacity 27 M spindle taper MT 4 MK Ppodpfx Aowp Tdzshvjp column diameter 125 mm bore spindle turning speed range 132-1852 U/min table-size 420x400 mm

Condition: good (used), Code: 0342 Brand: VITAP Model: ALFA 35 - CE Standard Psdeywm A Hepfx Ahvepp Semi-automatic multiple boring machine with 35 spindles for furniture, kitchens, bathroom furniture, custom-made furniture, panels - CE Standard Technical data N° 35 spindles with quick coupling Centre distance between each spindle mm 32 Centre distance between first and last spindle mm 1088 Max depth of hole mm 70 Board dimensions mm 1330 x 500 Spindle rotations per minute 2800 Motor power Hp 3 Turret with 6 different depth positions Side fence Horizontal/vertical 45 degree pneumatic tilting head Metric bar 3000 mm with stops Operating pressure 6- 8 atm Overall dimensions mm 1590 x 860 x 1250 h Weight kg 454

Condition: excellent (used), Knopp Duplex glass drilling machine double-sided. Year of manufacture 2000 In good condition. Ppsdpfeq Umcnjx Ahvop With ball roller table, cross laser and infinitely variable speed control. Incl water cooling

Condition: excellent (used), Column Drilling Machine Manufacturer: WEBO Ppjdpjywhu Djfx Ahvsp Model: V 5 Morse taper: MK 3 Clamping table: 470 x 380 mm Max. installation dimension, table to spindle: 900 mm Throat depth: 300 mm Infinitely variable speed, min. 125 max. 1080 rpm 3 automatic feeds: 0.1 - 0.2 - 0.3 mm/rev Quill stroke: 170 mm 380 Volt 1.5 kW 3.5 A Accessories: Drill chuck 3-16 mm Coolant system The machine is in very good condition Transport dimensions: Length 900 mm Width 700 mm Height 2260 mm Weight 630 kg

Condition: used, drilling capacity steel/GG: 30/40 mm spindle taper: 3 MK arm length: 350 mm table size: 350 Ø mm spindle sleeve stroke: 150 mm Ppsdob Hl H Ispfx Ahvjp spindle turning speed range: 155; 280; 470 u. 790 rpm carriages: 0,1/0,2/0,3 mm engine: 380 V, 1,1 kW space needed: 950 x 530 x 2300 mm weight: 445 kg

Year of construction: 1956, condition: used, machine/vehicle number: 6255, drilling capacity steel/GG: 23 mm Podpfxjbn Ak Us Ahvspp spindle taper: 2 MK arm length: 300 mm table size: 300 x 300 mm spindle sleeve stroke: 100 mm spindle turning speed range: 190 - 1500 rpm engine: 380 V, 0,5/0,75 kW space needed: 410 x 670 x 1950 mm weight: 180 kg

Condition: good (used), drilling capacity: ca. 13 mm Ppodpfod In Sfjx Ahvop spindle taper: B 16 MK throat: 250 mm table size: 220 x 325 mm spindle turning speed range: 350 - 1500 u. 750 - 3000 rpm engine: 380 V, 0,3/0,4 kW space needed: 680 x 400 x 1670 mm

Year of construction: 1970, condition: used, machine/vehicle number: 12901, drilling capacity steel/GG: 50/60 mm spindle taper: 5 MK Pjdpfey R Thox Ahvjpp arm length: 400 mm table size: 700 x 600 mm spindle sleeve stroke: 275 mm spindle turning speed range: 32 - 1030 rpm carriages: 4: 0,1 - 0,4 mm engine: 380 V, 2,2/3,7 kW space needed: 700 x 1200 x 2700 mm weight: 1240 kg

Condition: used, Drilling capacity: 35/40 mm Spindle mount: MK 4 Podpjb N Ahlofx Ahvopp throat: 230 mm Table size: 1050 x 625 mm Table height above floor: 560 mm small / large distance between table and drilling sleeve: 549/960 mm quill stroke: 170 mm spindle speed infinitely variable: 50 - 800 rpm space requirement: 1050 x 1000 x 2170 mm Weight: 250 kg

Condition: used, drilling capacity steel/GG: 15 mm spindle taper: 1 MK arm length: 300 mm table size: 210 x 300 mm spindle sleeve stroke: 110 mm spindle turning speed range: 200 - 3000 rpm engine: 380 V, 1,1 kW space needed: 850 x 420 x 1860 mm weight: 220 kg Ppedpfx Aovxpp Hshvsp

Condition: used, Year of construction: 1971, drilling capacity steel/GG: 23 mm spindle taper: 3 MK arm length: 275 mm table size: 300 x 400 mm spindle sleeve stroke: 90 mm spindle turning speed range: 100 - 1180 rpm Ppjdpfx Aherz Nqasvjp carriages: 0,1/0,6/0,25 mm engine: 380 V, 1,25/2,15 kW space needed: 850 x 400 x 1770 mm weight: 280 kg

Condition: ready for operation (used), Drilling capacity steel/GG: approx. 25 mm Ppodov Du Raspfx Ahvjp Spindle mount: 2 MK Thrust: 300 mm Table size: 305 x 380 mm Quill stroke: 115 mm Spindle speeds: 200 - 1200 rpm Drive motor: 380 V, 1/1.5 kW Space required: 800 x 400 x 1800 mm Weight: approx. 280 kg

Condition: ready for operation (used), Year of construction: 2006, Speeds up to: 2250 rpm Feed rate: 0 - 300 mm/min Pjdpfsyfgd Eox Ahvepp Drive power per motor: 2.9 kW Electrical connection: 400 V Weight: 395 kg Required space: 4100 x 1670 x 1450 mm

Year of construction: 1984, condition: ready for operation (used), drilling capacity steel/GG: 18/23 mm spindle taper: 2 MK arm length: 250 mm table size: 250 x 370 mm spindle turning speed range: 400 - 5000 rpm engine: 0,48/0,6 kW Pjdpfx Ahok Tzu Rsvepp space needed: 750 x 500 x 1670 mm weight: 130 kg

Condition: ready for operation (used), machine/vehicle number: 331/43, drilling capacity: 3 mm throat: 100 mm spindle turning speed range: 6300/9000 rpm Ppedpfx Ajfnbgqohvjp engine: 380 V, 0,18 kW space needed: 470 x 250 x 520 mm weight: 39 kg

Condition: good (used), table mounting size: 400 x 1500 mm Pjdpsg A Inwofx Ahvopp table movement x: 1130 mm table movement y: 320 mm table movement z: 430 mm spindle taper: ISA 50 spindle turning speed range: Horizontal-/Vertikalspindel 32-1500/25-1200 rpm carriages longitudinal and cross: 15 - 600 mm/min carriages vertical: 6 - 240 mm/min space needed: 2500 x 2200 x 1900 mm weight: 3000 kg