Used Dowel Boring Machine for sale (84,139)

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Ledpfjlhwr Rjx Affota Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: used, Year of construction: 2000, Number of spindles in row: 11 Number of horizontal spindles: 3 Cup hinge boring head: yes, Blum Drill pitch: 32mm Lodpfx Afoxc Hi Uefota Power consumption: 2.2kW Drilling unit: swiveling

Year of construction: 2020, operating hours: 2,421 h, condition: ready for operation (used), travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 940 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 640, number of axes: 4, Control Unit Brand HEIDENHAIN Model iTNC 640 Main Drive Number of axis 4 Movement X-Axis Movement 1250 mm Y-Axis Movement 1100 mm Z-Axis Movement 940 mm W-Axis Movement 710 mm Workpiece Workpiece weight 3000 kg Lsdox D Hhmjpfx Affjta This 4-axis TOS Varnsdorf WHQ 10 CNC boring machine was manufactured in 2020. It features a spindle diameter of 100 mm, ISO 50 taper, and spindle speeds up to 2500 rpm. The table can handle weights up to 3000 kg and includes a 40-position tool changer. Currently operational, though "Y" axis calibration is needed. Consider the opportunity to buy this TOS Varnsdorf WHQ 10 CNC boring machine. Contact us for more information about this machine. Application Types Other Machine Tools

Condition: used, Year of construction: 2017, Number of drilling spindles: 21 pcsPitch: 32 mmDrill chuck: Clamping surface of drill shank: 10 mmOperation: foot pedalTools included: yesDrilling direction: from below & end faceTilting: manualTilting angle: only 0° or 90°Max. pass-through height: 80 mmMax. pass-through width: 750 mmNumber of material clamps: 3 pcsType of material clamping: pneumaticDesign: stationaryStop system: only for structural seriesWeight approx.: 400 kgMotor power: 1.5 kWDust extraction diameter: 120 mmStorage location: with customer Lodpfeihghrox Affjta

Condition: excellent (used), Drilling machine for turned components Triade Ltedpfx Aex Dra Uoffja Number of drilling units: 3

Condition: reconditioned (used), functionality: fully functional, Push-rod drilling unit electro-pneumatic push-rod drilling unit Type RPM-S4 3.0 kW 2850 rpm 4 units in stock Ledpsqv Ey Ujfx Affjta

Condition: used, Year of construction: 1998, travel distance X-axis: 8,300 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,000 mm, table load: 30,000 kg, spindle diameter: 220 mm, BRAND: COLGAR MODEL: FRAL 70 C16 CATEGORY: CNC BORING MACHINE YEAR: 1998 CNC CONTROL: ECS CNC2600 MACHINE DIMENSIONS Length: 14,000 mm Width: 9,000 mm Height: 6,500 mm SPINDLE HEAD Quill diameter for boring: 160 mm Spindle nose type: ISO-50 Milling spindle diameter: 220 mm Spindle speed range: 2 – 1,665 rpm Spindle motor power: 55 kW Overhauled bi-rotary automatic head A axis minimum angle: 2.5° C axis minimum angle: 1° Automatic head changer system High-pressure coolant through spindle line with pump WORKING CAPACITY X axis: 8,300 mm Y axis: 3,000 mm Z axis: 1,000 mm V axis: 2,000 mm W axis: 800 mm B axis rotation: 360° A axis bi-rotary head: 360° (minimum angle 2.5°) Ltjdpfx Ajx E U R Ioffea C axis bi-rotary head: 360° (minimum angle 1°) RAM dimensions: 645 x 500 mm ROTARY TABLE Table dimensions: 2,500 x 2,500 mm Maximum load: 30,000 kg Number of Stolle plates: 2 (each 4,000 x 2,000 mm) FEED RATES Rapid feed (axes X, Y, Z, V, W): 8,000 mm/min Working feed (axes X, Y, Z, V, W): 6,000 mm/min TOOL MAGAZINE Capacity: 60 tools Tool holder: DIN 69871-B50 ACCESSORIES Machine complete with accessories, Stolle plates, and rotary table

Condition: used, Year of construction: 1992, Number of spindles per row of holes: 16 Number of horizontal spindles: 5 Cup hinge drilling head: yes Drill pitch: 32 mm Hold-down device: yes / pneumatic Ltodpfxswv Nb Ne Affoa Power consumption: 2.2 kW Drilling unit: swivelling

Year of construction: 1990, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 5000 rpm Tool taper ISO 50 Lodpfox D R Idex Affota Additional Equipment Automatic tool changer: 40 positions Working spindle diameter: 128 mm This 4-axis TOS WFQ80NCA-CNC/50 boring machine was manufactured in 1990. Consider the opportunity to buy this TOS WFQ80NCA-CNC/50 boring machine. Contact us for more information. Application Types Other Machine Tools

Condition: used, Year of construction: 2022, New demonstration machine! List price: €13,610.- 400V, 3Ph, 50Hz / 1.5 kW complete in standard configuration with: Fully automatic electronic control with impulse operation via foot pedal for clamping-drilling-unclamping, automatic electrical return of the drilling unit once the set drilling depth has been reached, automatic adjustment for increased drill depth when end-faced drilling saves need to reset the depth for surface to edge drilling operations (+10 mm; e.g., for dowel length 35 mm, surface depth 14 mm and edge depth 24 mm). 1 drilling beam with 21 spindles, 32 mm center distance, 1.5 kW motor (drill feed 0-70 mm). Incl. 21 quick-change chucks (Ganner system) for easy bit exchange; multi-position swivel drilling unit from 0° to 90°, supported by gas spring. 1 clamp carrier, movable along the Y-axis with 3 pneumatic clamps, for workpiece height up to max. 80 mm. Comprehensive stop system includes: 1 1800 mm stop rail for shelf drilling (aluminum profile 40x40 mm) with 3 locator stops, quick-change system, easily switchable from right to left side for mirrored shelf drilling in cabinet construction; also usable for line boring in System 32. Limit stops and position settings as well as drilling height position over the support table with mechanical digital stop. Stops can be easily swung away for the quickest changeover from cabinet to frame and arm extensions for clamp carrier executed for line boring positions up to max. 300 mm. Ideal three-stage tool system. 1 set of dowel drills: 5 carbide dowel drills, Ø 8x77 mm, right; 4 carbide dowel drills, Ø 8x77 mm, left. Additional features: Extraction funnel, dust-tested, Ø 120 mm. Set for line boring in System 32 complete with: 2 guides with scale and adapter for position max. 300 mm, 2 pairs of locator cams for line boring for Y-position 37 mm and e.g. 300 mm, 1 base rail 1000 mm (aluminum profile 40x40 mm), 1 setting gauge for line boring. 1 set of drills: 11 carbide line boring drills, Ø 5x57 mm, right; 10 carbide line boring drills, Ø 5x57 mm, left. Hydraulic brake cylinder. Clamping cylinder with holder, additional. Location: Ltedpfeqw Ek Iex Affoa

Condition: ready for operation (used), Year of construction: 1993, mobile, drilling from the front, 1 core drill D=34 mm, 2650 mm long, approx. 1200 mm deep, operating manual Ltjdex Ez Nkopfx Affea

Condition: excellent (used), KOCH Dowel Inserting Machine Type DL-80 Machine No.: A0005/6390 Workpiece Dimensions: Workpiece length: 180 - 2500 mm Workpiece width: 70 - 800 mm Workpiece thickness: 12 - 40 mm - with glue application and dowel insertion station - with 1:1 glue pump - 1 vibratory feeder with control mirror per side - lateral dowel hole air nozzles - mechanical digital display for height adjustment - PLC control - machine bed with linear guides 1 x NC axis for positioning Configuration of glue application and dowel insertion station: 6 single dowel tools per side Dowel diameter: 8 mm Dowel length: 35 mm Dowel projection: 7-14 mm Pitch: 32 mm Minimum dowel center distance: 32 mm; maximum: 736 mm Tolerances for wooden dowels: Dowel length: +/- 1 mm Dowel diameter: +0.1 / -0.2 mm Electronic Glue Monitoring ELC The monitoring device is installed before the glue valve. With every working cycle (glue shot), the glue flow is measured. Ltjdpfjx Ez A Rsx Affsa If no glue is dispensed from an activated glue valve, the machine interrupts its cycle and indicates the relevant glue valve on the control cabinet. 12 x Electronic Glue Monitoring ELC, one per glue valve Flip-up belt extension Workpiece alignment station in belt infeed for minimum workpiece width of 70 mm, plus alignment for narrow parts Electrical connection rating: 400 V, 50 Hz, 3 phase Voltage fluctuation: max. +6 to -10% Air connection: 7 bar Extraction air speed: approx. 30 m/sec Ambient temperature at installation site: min. 10° C (50° F), max. 40° C (100° F)

Condition: used, Year of construction: 2000, functionality: fully functional, Spindle taper: ISO 40 RPM.: 35-1800 (variable) Travel: X850 Y290 Z475 mm. Table size: 1250 x 280 mm. Automatic feed: X, Y & Z. Rapid speed: X, Y & Z. Motor: 7,5 HP. Ledpfx Afjx Ex Sijfsta Digital readout: Electronica EL403M (X, Y & Z) Year: 2000 Country of origin: Spain. Size (L x W x H): 2050 x 2220 x 2050 mm. Weight: 1900 kg. Variable speed with digital readout in 2 gear ranges, variable feed speed with digital readout. With Hurré milling head and supports. All our machines are tested and serviced before delivery.

Condition: used, Price: On request - Documentation available: No - CE certificate present: No - Control: Conventional - Drilling depth: 150mm - Model: ördinatenboor - Digital readout: Yes Ltjdpowfpbbofx Affoa - Table width: 1500mm - Table length: 2200mm - Travel X: 2500mm - Travel Y: 1400mm - Spindle diameter: 100mm - Travel Z: 1000mm - Number of axes: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, CNC drill and dowel inserting machine for fully automatic bore, glue and dowel driving. The drill glue and dowel machining center with compactness, efficiency, quality and flexibility. Ledpedx R Dfefx Affsta Short introduction: • Universal CNC controlled drilling and dowel inserting machine • Glue shot monitoring via GIC • Closed gluing system • Suitable for panel and solid wood processing • Optional additional horizontal and vertical drilling spindles • Relieves CNC machining centers • Optimal complement to nesting machines

Condition: used, Year of construction: 2004, Drill chuck: Two-jaw chuck; Speeds: 2800 rpm; Drilling stroke: 200 mm; Max. drilling depth: 150 mm; Operation: Single-handed; Height adjustment: manual; Clamping cylinder: 1 pc; Clamping cylinder activation: Hand-operated eccentric; Version: movable drill head; Drill head tiltable: Yes; Table width: 630 mm; Table depth: 285 mm; Weight approx.: 240 kg; Motor power: 2.2 kW; Extraction diameter: 80 mm Location: Customer Ledpfxjxbiu Ro Affota

Year of construction: 1977, condition: ready for operation (used), Precision dowel boring machine. Pneumatic clamping, 2 drilling units, swivelling (0-90 degrees). Working width approx. 1200mm. Inspection possible by appointment. Ltedpsx Ecu Sefx Affja

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: as new, only a few drillings performed Equipment and technical data: Spindle speed: 3,000 rpm Drilling width: 240 mm Max. drilling depth at 90°: 180 mm Drill head height adjustment: 160 mm Tool clamping range: 0 – 20 mm Worktable rotation: ±60° Ltodpfx Aow E Tz Eoffsa Worktable length: 565 mm Worktable width: 315 mm Extraction port diameter: 90 mm Output power: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Dimensions: 1,290 × 980 × 1,270 mm Weight: 260 kg Availability: short-term Location: Saxony-Anhalt

Condition: good (used), Year of construction: 1977, workpiece weight 279 KG length ca. von Bett bis Lynette mm Lodpjrfd U Rsfx Affota 189 € . max durchlass 369 mm

Condition: new, Year of construction: 2025, functionality: fully functional, Gannomat Selekta dowel driving device Year of manufacture 2025 Lodpfx Afsvxgm Nefjta Dowel driving machine with gun for simultaneous gluing and dowel driving. For professional and efficient processing of dowels in furniture and frame construction. • Constant dowel driving protrusion • Always constant and correct amount of glue • Due to the correct amount of glue, no subsequent cleaning of the workpieces is necessary • Easy cleaning of the glue system via EasyClean, the automatic cleaning program • Automatic ejection of dowels with the wrong diameter and length thanks to Auto-DL-Selekt • Dowels are not driven into the bottom, the dowel driving protrusion is set independently of the drill hole depth • Recoil-free, extra-light and comfortable glue-dowel-driving gun • Great time saving compared to glue bottle and hammer

Condition: new, Year of construction: 2026, CNC drill and dowel inserting machine for fully automatic bore, glue and dowel driving. The drill glue and dowel machining center with compactness, efficiency, quality and flexibility. Ledpfjdx Axfex Affota Short introduction: • Universal CNC controlled drilling and dowel inserting machine • Glue shot monitoring via GIC • Closed gluing system • Suitable for panel and solid wood processing • Optional additional horizontal and vertical drilling spindles • Relieves CNC machining centers • Optimal complement to nesting machines

Condition: used, Year of construction: 2024, Slot drilling machine with rotating table • Drilling unit rotatable • 2 eccentric clamps • Height display • Mechanical dowel boring device (16-22-25-32 mm hole spacing) • 2 speeds: 1440 / 2880 rpm • Motor power 1.5 kW 1.1 Working table mm 800x400 1.2 Motor kW 1.5 1.3 Spindle speed rpm 2880 1.4 Max. slot height above table mm 160 1.5 Max. longitudinal traverse mm 345 1.6 Max. lateral traverse mm 245 1.7 Spindle stroke mm 160 1.8 Tool clamping diameter mm 0-20 1.9 Max. tool length mm 175 1.10 Number of eccentric clamps 1 1.11 Longitudinal tilt table angle ° 1.12 Spindle rotation ° 1.13 Table rotation ° +/- 45° 1.14 Machine dimensions mm 1500x1100x950 1.15 Machine weight kg 345 P 41 55 Extraction connection 1 P 41 25 2nd eccentric clamp 1 P 41 20 Mechanical dowel boring device 1 P41 07 2-speed motor 1.5/1.9kW 1440/2880 rpm P41 34 Mechanical numeric spindle height measurement Ltjdpfxewd U U Dj Affsa Location:

Condition: good (used), For sale is a mortising drilling carriage suitable for Felder machines from model year 1992 onwards. The drilling carriage is in good condition and has been reconditioned and inspected by our specialist staff. (Fully functional) Technical data: - Incl. coupling and drive unit Ltedpoxzglgjfx Affja - With ADAPTER for SERIES 6 / 7 - Drilling height adjustment range: 135 mm - Drilling length: 250 mm - Drilling depth: 155 mm The machine is located in A-8561 Söding and can be inspected and collected at any time during our opening hours. Subject to prior sale! Related terms: pedestal drill, column drilling machine, drill Reference: R-D1618

Condition: used, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,250 mm, spindle diameter: 110 mm, X-AXIS TRAVEL 2000 MM Y-STROKE VERTICAL 1400 MM Z-AXIS TRAVEL COLUMN: 1250 MM W-AXIS SPINDLE TRAVEL 710 MM TABLE 1400 X 1600 MM WORKPIECE LOAD 8000 KG SPINDLE SPEED 10 - 2000 RPM Ltedpsx Da Sljfx Affja ISO 50 RAPID FEED X Y Z 10000 MM/MIN CNC HEIDENHAIN TNC 426 ATC 60 PLACES

Condition: new, Year of construction: 2026, Multi-spindle thrufeed bore and dowel insertion machine Lodpfxedx Axko Affota in the of System 32 mm through multi spindle drillhead and adjustable doweling stations. Short introduction: • Double sided boring and dowel inserter with a workpiece return transport system • Small footprint requirement for a multi-spindle thrufeed dowel insertion machine • Optional, additional vertical drilling units • Closed gluing system • Double sided drill glue dowel machine for high capacity