Used Dovetailers for sale (157)

Condition: reconditioned (used), functionality: fully functional, Equipment: rotational speed infinitely variable, A used Benzinger precision hand lathe. Universal application with a Röhm 4-jaw chuck. The machine is partially overhauled and fully functional. Dcedjwp Ddxepfx Ab Tjr Equipped with a Röhm 4-jaw chuck 2 hand lever slides with Multifix universal tool holder Kobold motor 0.55 kW, 1400 rpm with stepless speed control. The following work has been carried out: - New spindle axial bearing - New V-belt - Machine bed hand-scraped - New capillary lubrication - Motor overhauled - All dovetail guides ground and hand-scraped - All guides adjusted free of play - New graduated drums and leadscrews - Cross-slide completely overhauled - Cross-slides with Multifix completely overhauled

Condition: used, Year of construction: 2024, functionality: fully functional, year of last overhaul: 2024, Forging Hammer Type Beche KGH 8.0 Modernization 2023-2024 (Year of manufacture: 1980) Dcsdpfx Abjxwat Ns Ter The hammer has been completely overhauled in Germany. Hydraulic Drive - Completely disassembled in 2024, cleaned, control valves renewed New Control System - Siemens S7-1500F PLC control with touch panel Anvil Base (U-frame) - Contact surface ground - Insert adapted - Wedge newly manufactured and inserted Test Run - Hammer was assembled in 2024 and underwent a test run in 2025 Technical Description: Working capacity: 80 kJ Max. die height: 600 mm (without dovetails) Min. die height: 200 mm (without dovetails) Ram depth: 810 mm Ram weight: 6,100 kg Anvil base weight: 105,000 kg Total weight: 130,700 kg Total height: 7.3 m above floor level

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11174, For sale: our used Hundegger fully automatic joinery machine, model K2, year of manufacture 2001 - Infeed and loading cross conveyor (6-strand) - Underslung pivoting crosscut saw - Universal milling unit (UF4) - Combination support for vertically operating tools - Drilling unit 2.2 kW - vertical - Drilling unit 3 kW - vertical - Vertical finger-joint cutter 7.5 kW - Combination support for horizontally operating tools - Drilling unit 2.2 kW - Drilling unit 2.2 kW - horizontally swiveling - Slotting unit - Rear marking unit - Underside marking and labeling device - Fully automatic beam-turning station - Dovetail cutter - Transport and positioning device "two-hand system" Djdpfexvychex Ab Tecr - Electronic control - 5.30 m roller conveyor extension - 6-arm output table - Height-adjustable safety stop plate - AWF extension + timber feeder 13 m - Tooling included - Further details and accessories as shown in photos and available on request. The machine is fully operational and can be inspected by appointment. Available from Spring 2026. All documentation is present, regularly serviced by Hundegger, sold without refurbishment. Dismantling and collection by the buyer. The sale is made as a used machine with the exclusion of any warranty or guarantee.

Condition: good (used), Reciprocating saw, dovetail saw, tiger saw, saber saw -Flex reciprocating saw: SK -Nominal power input: 1200 W -in :suitcase -Dimensions: 610/120/H250 mm Dcjdefdta Iopfx Ab Tsr -Weight: 5.8 kg

Condition: used, Hoffmann PU2 dovetail milling machine for the precise milling of dovetail joints and slots in wood and wood-based materials. The machine is ideally suited for joining frames, moldings, and profiles in furniture and window manufacturing. Thanks to the pneumatic clamping device and precise milling depth, fast and repeatable series production is possible. Includes numerous accessories. milling motor: 1.000 W Dodpjxrynpefx Ab Tjcr milling cutter: W2 & W3 workpiece height: max. approx. 115 mm Hold-down: pneumatic

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2025/002, Finger jointing machines and lines are a masterpiece of woodworking industry >wood entry lengths 900 to 6100 mm< >wood rests and tools drive< >Best tooth milling quality and optimized cutting speed< >Long service life of the milling tools / dovetail cutters< -MINDA - MACH I (patented) -High performance finger jointing line -for KVH / DUO / TRIO / BSH / GL / CLT -technical running meters capacity = approx. 150 m/min -vertical and horizontal joints possible max. 200 x 300 mm -extremely flexible; short set-up times; reliable operation Dedpfx Abscbyp Nj Tocr The only package system in the world that can also process a single board or single beam. -finger jointing machine, for vertical and horizontal milling, zinc profiles, made in Germany, along with new developments in the clamping stations and the transfer channel on the router table, has the Joema MACH I include a groundbreaking benefits, fast pace. Together with 1200 mm milling channel at 40 mm Thickness technical power meter = approx 150 meters /min, very reliable material transport - No vulnerable conveyor rollers, flaps and cross conveyors - high availability - for all sections including square suitable - by fully automatic, continuous channel matching is possible in extreme cases single mill - thus the system is extremely flexible, vertically horizontally and zinc profiles possible performance with KVH 160 x 280 mm are 38 meters / min, with KVH 100 x 300 mm, 64 meters / min, at BSH 45 x 250 mm are 110 meters / min, >>cutting-edge technology simply kept

Year of construction: 2023, condition: used, Used machine Year of manufacture: 2023, delivered in 2024 Condition: as new, machine is in original packaging and has not been commissioned Equipment and technical data: Infeed Table / Cross Conveyor: - Number of strands: 6 × Supergrip timing belts - Pitch: 650 / 650 / 850 / 1500 / 1500 mm - Length: approx. 1.8 m - Drive: geared motor, 1.5 kW - Minimum workpiece infeed length: 0.8 m - Function: Automatic transfer of raw material by lowering level to the infeed table Infeed Table: - Smooth sliding table with sliding plastic for damage-free feeding of raw material by servo pusher into the machining zone - Support width: approx. 200 mm BLOCKHAUS 4F-SERVO (main milling unit): - Machining dimensions: 140 × 200 mm - Maximum horizontal milling depth top: 60 mm - Maximum horizontal milling depth bottom: 35 mm - Maximum vertical milling depth: 95 mm - Milling spindles: Ø 30 mm - Horizontal milling tools: 2 × D = 220 mm × W = 120 mm - Vertical milling tools: 2 × D = 280 mm × W = 120 mm - Motor power: 4 × 4.0 kW - Feed: horizontal and vertical via SERVODRIVE, infinitely variable via software - Milling depth adjustment: spindle with digital counter - Workpiece clamping devices: vertical pneumatic, horizontal pneumatic - Extraction: below-floor hopper Ø 160 mm (pit by customer required) - Control: IPC / PLC / IITO software - Machine frame prepped for end tenon or dovetail milling, drilling unit and crosscut saw - Machine enclosure: fully closed, with swiveling safety hood (gas strut, viewing window) - Electrical control cabinet on base, cable carrier 3.0 m Option i (automatic milling depth adjustment for 4F milling unit): - Four additional NC-controlled servo axes for automatic positioning of the 4F tools - Control via IPC / IITO software - Function: automatic milling depth adjustment with ±0.1 mm tolerance - Extended machining capabilities: - individual grooves and millings on four component sides, - recesses and markings for window and door openings, - double and triple joints, - half corner joints (e.g. for top and bottom log beams) Tools: - 2 × 3-piece groove cutter D 220 mm, width 21–65 mm, LM - 2 × 3-piece groove cutter D 280 mm, width 21–65 mm, LM - 1 × end tenon cutter D 240 mm × 20 mm - 1 × dovetail cutter D 40 mm, width 15 mm Dcedpfx Aexavtkeb Tor Combination End Tenon & Dovetail Milling Unit: - 3-axis milling unit for production of end tenons and dovetail joints - End tenon cutter Ø 240 mm × width 30 mm - Max. milling depth for end tenon: 40 mm - Dovetail width variable - Motor power: 4.0 kW - Speed: inverter-controlled, max. 4,500 rpm - Feed (DT.Y axis): SERVODRIVE, infinitely variable - Height adjustment (DT.Z axis): SERVODRIVE - Rotation adjustment (DT.R axis): SERVODRIVE - Workpiece clamping device: vertical pneumatic - Minimum beam thickness for longitudinal connection: 80 mm - Control: automatic via IPC / PLC / IITO software Horizontal Drilling Unit with Drill Guide (BGD SERVO): - Max. drilling diameter: Ø 30 mm - Drill Ø = 20 mm included in delivery - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: SERVODRIVE, infinitely variable - Height adjustment (Z axis): SERVODRIVE, digital counter - Workpiece clamping device: vertical pneumatic

Condition: used, Technical details: pressure: 315 t chamfer lenght: 5050 mm distance between columns: 4100 mm throat: 500 mm stroke: 250 (Wange) mm control: DNC 884s weight of the machine ca.: 27,0 t machine dimensions LxWxH: 5,7 x 2,2 x 4,0 m Machine stands approx. 0.95 m inside foundation in the floor. Application for: Embossing and free bending via the DNC control, manual, semi-automatic and automatic operation is possible. distance between table and upper beam max. 490 Table: with extension about 800mm, tool holder on the table = dovetail 30mm. accessories: many dies and punches Dcsdpfxeu Iccps Ab Ter *

Condition: like new (used), Year of construction: 2015, I sell the automatic CNC working centre for wooden constructions Hundegger K2i. Almost new machine. Year 2011. Under-table rotary saw with saw blade from 750 mm to 800 mm, 360 degree rotation, servohydraulic tilting 0 – 65 degrees universal 5-axis unit equipped with cylindrical milling cutter, end mill and end mill, milling head diameter 350 mm x 100 mm end mill combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min 460 mm, machining depth min 300 mm combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min. 460 mm, machining depth min. 300 mm positioning and gripping of the material using arms, which, while the material is measured, transported to the desired location, the arms keep the processed element as close as possible to the tool that processes it for stability. the processed material can be rotated automatically tolerance +/- 2 mm at a length of 13 m Fully automatic wood input with input roller track and input and sliding cross conveyor K2i: Under-table tilting cross-cut saw K2i: Universal milling unit – 4-axis (UF4) K2i: Kombisupport for vertically working tools K2i: Drilling device (2.2 kW) – vertical drilling direction K2i: Kombisupport for horizontally working tools K2i: Drilling device (2.2 kW) – horizontal drilling direction K2i: Marking tool (rear or on the user side) K2i: Fully automatic element rotation – hydraulic Dcodpfxextxkxj Ab Tjr K2i: Transport and positioning system “two-hand system” K2i: Electronic connection K2i: Roller track for removal wooden elements with a pusher K2i: 5-arm storage table K2i: Safety device K2i: Higher quality upper surface of the machine K2i: Extension of the K2i frame to 13.56 m K2i: 5-axis universal milling unit - UF5 (increase to 4-axis) K2i: Remote maintenance (including portable video camera) K2i: Dovetail milling machine (with rotating knives) 60x28x16.5 Suitable for wooden house constructions! Available immediately.

Condition: ready for operation (used), Year of construction: 1999, functionality: limited functionality, Equipment Joinery Machine K2 Cross Infeed Conveyor 5-strand 2.2 m Extendable Timber Rack Undertable Swing Cut-off Saw with Open Base Control System for Cut-off Disposal Universal Milling Unit Roller Cutter Finger Cutter Dovetail Cutter Combination Support for Vertically Operating Tools Drilling Device Combination Support for Horizontally Operating Tools Drilling Device 1 Drilling Device 2 Slotting Device Marking Device (Stop Side) Fully Automatic Beam Turning Station Extension Table 7.1 m Transfer Cross Conveyor 6-strand 6-arm Depositing Table Planing Machine HMC Fully Automatic 4-sided Planing and Chamfering Planer Motors 7 kW Dcjdpfx Aboxrkkzj Ter The machine can be inspected at any time upon request. The buyer is responsible for dismantling and transportation.

Condition: good (used), Code: 0125 Brand: OMEC - ITALY Model: F8 - CE Standard Automatic dovetailing machine for dovetail joints on drawers and various furniture elements - CE Standard Dcodpfx Abjwl Iv Re Tor The machine is equipped with a unit of 8 spindles with equal mill cutters that allow the production of indents of different heights. Technical data: No. 8 spindles Spindle revolutions /min 17,000 Maximum working width mm 400 Distance between centres of indents mm 25 Drawers production 120 / hour Power Kw 7,5 Working pressure 6 atm Overall dimensions: mm 1500 x 1000 x 1200 h Weight kg 1100

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, overall weight: 300 kg, Cross Slide – Support Type PS 35 Support suitable for hand-operated bending machines with a 350 mm center height Technical Data Longitudinal slide travel: 360 mm Cross slide travel: 150 mm Height: 325 mm Rotary table diameter: 215 mm Shear length: 550 mm Weight approx.: 300 kg Dedsxp Sfhepfx Ab Tecr Machine Description - Technically inspected and ready for operation - Robust cast iron construction - Adjustable dovetail guides - Trapezoidal spindle for longitudinal and cross slide - Large dimensioned handwheels

Condition: used, Cross table with handwheels Table size: 300 x 200 mm Travel in X: 160 mm Travel in Y: 240 mm Construction height: 141 mm Djdpfx Aboxf Uxie Tscr - Spindle pitch 4 mm (4 mm travel per handwheel rotation) - Rotatable by 340° - Dovetail guideway - 2x T-slots in the clamping surface, 14 mm Weight: 38 kg Good condition

Condition: as good as new (ex-display), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 64011811002, feed length X-axis: 610 mm, feed length Y-axis: 230 mm, feed length Z-axis: 310 mm, travel distance X-axis: 690 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 390 mm, spindle speed (max.): 4,200 rpm, throat depth: 415 mm, quill stroke: 127 mm, type of input current: three-phase, total length: 2,000 mm, total height: 2,010 mm, table width: 230 mm, input voltage: 400 V, total width: 1,600 mm, table length: 1,246 mm, drilling capacity: 24 mm, stroke length: 127 mm, rotational speed (max.): 4,200 rpm, workpiece weight (max.): 200 kg, rotational speed (min.): 60 rpm, Equipment: rotational speed infinitely variable, Multifunctional drilling and milling machines with mechanically infinitely variable drive and digital 3-axis position display - Solid design made from high-quality Meehanite cast iron - High concentricity due to tapered roller bearings, ≤ 0.01 mm measured in the quill - X- and Z-axis with adjustable 55° dovetail guide - Y-axis with adjustable flat guide - Coolant device - Solid and generously dimensioned cross table, precisely surface-finished with adjustable end stops - Drilling/milling head can be tilted ± 45 - Automatic quill feed, 3-stage 0.04 - 0.15 mm/rev - Precision micro feed - Adjustable drilling depth stop with millimeter scale, readable from the front Dcodpot Sk E Esfx Ab Tjr - Right/left rotation - Infinitely variable speed control - Milling spindle with precision bearing - Mechanical spindle brake - Height-adjustable protective screen with microswitch, against flying chips and parts, for maximum protection of the user user

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, spindle drive for upper support -Spindle drive: for upper support -Trapezoidal spindle: Ø 20 mm Dcodpsxfzuwefx Ab Tjr -Dimensions: see photos -Dimensions total: 450/155/H110 mm -Weight: 5.4 kg

Condition: new, Year of construction: 2025, saw blade diameter 370 x 3,0 x 40 mm cutting diameter 120 mm stroke -- mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 180 x 100 mm capacity 45 degrees: round li. 120 / re. 105 mm capacity 45 degrees: square li. 100 / re. 100 mm capacity 45 degrees: flat li. 130x100 / re . 130x10 mm Dcedsvuz Rnspfx Ab Tsr capacity 60 degrees: round 110 mm capacity 60 degrees: square 90 mm capacity 60 degrees: flat 90 x 100 mm total power requirement 1,8 / 2,2 kW weight of the machine ca. 392 kg dimensions of the machine ca. 700 x 900 x 1800 mm Description: - Mitre left 60° + right 45° - Clamping block with double clamping arm - Robust prism guide for the saw head (adjustable dovetail guide) - Chip brush - Automatic cooling - Metal handle for high clamping force - Solid, strong cast iron table

Condition: good (used), Code: 0106 Brand: OMEC - ITALY Model: 650-M Dovetailing machine Technical characteristics: Installed power on board machine Kw 0,75 Max working width mm 420 Dcjderc Dgmjpfx Ab Tor Center to center of indents mm 25-40-50-80 Overall dimensions: mm 800 x 720 x 1320 h Weight kg 130

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, overall weight: 250 kg, Cross Slide – Support Type PS 30 Support suitable for hand-operated press machines with 300 mm center height Technical Data Dsdpfsxp Sd Rox Ab Tecr Longitudinal slide travel: 220 mm Cross slide travel: 120 mm Height: 230 mm Rotary table diameter: 200 mm Shear length: 550 mm Weight approx.: 250 kg Machine Description - Technically inspected and ready for operation - Robust cast iron construction - Adjustable dovetail guides - Trapezoidal spindle for longitudinal and cross slide - Large handwheels

Condition: used, Double Bench Grinder STEPHAN-WERKE HAMELN Type SLD 121 Serial No. 1176445 Grinding wheel diameter: 175/145 mm Grinding wheel width: 20 mm Motor power: 0.37 kW Grinding wheel speed: 2800 rpm Mains connection: 380 Volt, 50 Hz Dodpfsxciu Hjx Ab Tjcr - Original base - Side-mounted ball bearing slide with dovetail guide - Universal holder for the sliding carriage Space requirement (L x W x H): 470 x 430 x 1160 mm Weight: approx. 80 kg In good condition

Condition: new, Special offer price for in-stock items! Only while supplies last! Price net ex-works, freight prepaid. The machine does not include a base frame. BF3 Deluxe base frame is available separately under item no. 56-1017. Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. cutter head diameter: 80 mm Throat: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle mount: MT 4 Quill stroke: 125 mm Table size: 800 x 240 mm Travel (x / y): 555 / 225 mm Milling head swivel range: -90° to +90° Distance spindle to table: 60 - 485 mm Milling head height adjustment: 425 mm T-slot size: 14 mm Motor power output S1 100%: 1.1 / 1.5 kW (400 V) Motor power input S6 40%: 1.5 / 2.2 kW (400 V) Dcsdedh Hbcspfx Ab Ter Machine dimensions (W x D x H)*: 1140 x 770 x 1500 mm Weight approx.: 287 kg * without base frame Features: - Easy and quick speed changes using the gear selector switch - Versatile applications such as drilling, milling, threading, etc. - Extremely smooth operation thanks to ground gears running in an oil bath - Forward and reverse rotation for threading - Spindle adjustment via handle, fine adjustment via handwheel - Dovetail guide for the x-, y-, and z-axes, adjustable via V-shaped guides - Milling head pivots on both sides for angle drilling, milling chamfers, etc. - Large, solid cross table with precise surface finish - Optimal price-performance ratio for the cost-conscious user Scope of delivery: Keyless drill chuck 3-16 mm / B 16 Drill chuck arbor MK 4 / B 16 M 16 drawbar spindle MK 4/3 reduction sleeve MK 4/27 mm combination milling arbor Height-adjustable protective cover Thread cutting device LED machine light Digital spindle stroke indicator Lamellar protective cover Longitudinal measuring scale Operating tool

Condition: good (used), Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 40 mm / height 108 mm Dcjdpfx Abexfhyts Tor -Dovetail: 79 to 59 mm 15 mm high -Dimensions: see technical drawing in the photos -Dimensions: 140/73/H155 mm -Weight: 3.6 kg

Condition: used, Slotting head, suitable for DECKEL type FP 2 milling machine Manufacturer No. 2211 / 1895 Dovetail width: approx. 76 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 320 mm Dovetail leading edge to gear center: approx. 235 mm Stroke size: max. 80 mm Stroke rate: max. 210 double strokes/min. Tool holder: square, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Driven by the machine gear, within the dovetail guide (as with a normal vertical head) - This slotting head is inserted into the dovetail guide in place of the normal vertical milling head (Mounted in place of the vertical milling head, milling head) - Drive gear in the slotting head, 39 teeth, gear width 16 mm, presumably 20° pressure angle - Slotting head on the flange plate can be rotated 360°, degree scale +/- 35° Weight: 32 kg Very good condition Dsdjwbi Rbspfx Ab Tjcr DECKEL FP1 has a pressure angle of 15° on the drive gear DECKEL FP2 + FP3 - has a pressure angle of 20° on the drive gear

Condition: good (used), Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 48 mm / height 150 mm -Dovetail: 140 to 115 mm 22 mm high Dsdpfx Aboxfhygs Tocr -Dimensions: see technical drawing in the photos -Dimensions: 215/80/H210 mm -Weight: 6.8 kg

Condition: used, Indexing head with tailstock DECKEL Center height: 100 mm Gear ratio: 40:1 Spindle bore: 26 mm - 3-jaw chuck FORKARDT, Type F 160 with one set of step jaws - Crank handle with index plate and sector arms - Swiveling crank handle with index plate for direct dividing - 1 index plate with hole numbers: 36, 37, 40, 58 Dsdpfx Ajxcbp Neb Tjcr - 24-step index position (15° increments), graduated scale on the main spindle - Tailstock center with dovetail guide - Complete indexing head rotatable and tiltable on base plate Dimensions (L x W x H): 600 x 400 x 270 mm Net weight: 67 kg Indexing head in need of repair: - Key strip for dovetail guide is missing - Lever for index positioning is broken - Swivel mechanism is stiff

Condition: good (used), Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Dovetail: 190 to 165 mm -Bore: Ø 56 mm -Number: 2x counter bearings available -Price: per piece -Dimensions: 265/77/H122 mm Djdpfxoxfhv Ue Ab Tjcr -Weight: 6.1 kg/piece