Used Double Miter Saw for sale (19,892)

Year of construction: 1990, condition: used, machine/vehicle number: 102-014-3150, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 210 x 80 mm Ksdpfjdbp Eqsx Afijdu cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 160 x 80 mm cutting speed: 11/22 m/min space needed: 2650 x 1450 x 1980 mm weight: ca. 1100 kg

Condition: excellent (used), Omga V113P Double Mitre Saw for Frames Kodpfx Afjw T Rpzsiodu Double saw set at a 45-degree angle Saw blade diameter: 300 mm Saw blade bore diameter: 30 mm Two motors, each 1.1 kW Maximum cutting width: 70 mm Maximum cutting height: 75 mm Pneumatic material clamps Extended table on the right side

Condition: good (used), Year of construction: 2001, functionality: fully functional, cutting height (max.): 100 mm, cutting length (max.): 2,500 mm, saw blade diameter: 400 mm, Double cross-cut saw EIMA type 131 with 3 saw blades, electrically adjustable Kjdpfx Afownfc Hsiedu

Condition: used, Year of construction: 1993, Technical details: cutting diameter: 195 x 120 mm cutting range min.: 135 x 120 mm saw blade diameter: 380 mm cutting length min.: 500 mm cutting lenght max.: 6000 mm max. spindle speeds: 2800 U/min Kdodswz Hygjpfx Afieu total power requirement: 3 kW weight of the machine ca.: 850 kg

Condition: good (used), overall weight: 580 kg, Equipment: documentation/manual, About the item Kdedpfx Ajw Ucwaofieu WALTER FD2/250 – Double Saw Formatting Machine Wide chain spacing (cutting width from 116 cm to 130 cm) Comes with technical documentation (DTR). Two new 400 mm saw blades included for free. GOOD CONDITION NET PRICE

Year of construction: 2006, condition: ready for operation (used), Smallest cutting length at 90°: 350mm, smallest cutting length at 45° inclined: 350mm, swiveling range inward: 90-45° (down to 22.5° manually with digital display), tilting range inward pneumatically: 90-45°, saw blade diameter: 420mm, saw blade speed: 2800/min, electrical connection: 230/400, power output per motor: 4kW, compressed air connection: 7bar, air consumption per working cycle: 40l without spraying, 64l with spraying, length: 4380mm, width: 2871mm, height: 1985mm. With complete documentation, without accessories. An on-site inspection is possible, but not under power. The machine is already dismantled and ready for loading. No defects known, was regularly maintained by the manufacturer. Kdodpfx Afew Tc Shsiju

Year of construction: 1971, condition: used, machine/vehicle number: 23964, disk of circular saw-Ø: 370 mm Kjdpfscu Dvuox Afisdu cutting area at 90°: 115 mm cutting area at 45°: 115 mm engine: 380 V, 4/5 kW space needed: 1000 x 1200/2200 x 1500 mm weight: ca. 900 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OMGA V 235 - precise cutting from the program, - with a controlled ruler, (with a stop) - 3.7Kw, 350mm sheet size. Kdjdpew Tc Hrofx Afiju

Condition: like new (used), Year of construction: 2016, operating hours: 22 h, functionality: fully functional, saw blade diameter: 500 mm, Elumatec Double Mitre Saw DG 142 with E580/1 Control – Precision Saw for Aluminium and PVC Profiles For sale is a high-quality Elumatec DG 142 double mitre saw equipped with electronic control system E580/1. This machine is ideal for the precise cutting of aluminium, PVC, and light metal profiles – particularly suited for window, door, and façade construction. Technical specifications: Manufacturer: Elumatec Model: DG 142 Kedpfx Afew D Rv Deiedu Control: E580/1 (automatic positioning and angle adjustment) Mitre cuts: 45° – 90° (automatically adjustable) Cutting length: up to approx. 5,000 mm (depending on configuration) Blade diameter: approx. 500 mm Speed: approx. 2,800 rpm Connection: 400 V / three-phase Condition: used, technically flawless Availability: immediate +++ Operating hours: 22 HRS +++ Special features: - Automatic positioning of both saw units - Precise and clean cuts thanks to stable machine guidance - Programmable control for highly repeatable series cuts - Excellent cutting quality, also on demanding profiles - Ideal for metal fabrication, window production, and conservatory construction The machine is network-capable incl. extraction unit + SICK light curtain

Year of construction: 2000, condition: good (used), Power: 5.5 kW Kedpfx Afsw S Nyceijdu Weight: 2,200 kg

Condition: like new (used), Year of construction: 2019, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,000 mm, saw blade diameter: 500 mm, air pressure: 6 bar, Emmegi Classic Magic 500 5 Meter Year built: 2019, as new condition - LCD display with backlighting - Pre-installed interface for industrial label printer connection Kdedpsw Svxlsfx Afiou - USB port - Capability for single cuts - Storage for 99 profile correction values and automatic calculation of cutting lengths for miter cuts - Storage for 20 cut lists entered via the keyboard (up to 50 sets each) - Storage for 10 cut lists imported via RS232 serial interface from an external PC (up to 100 sets each) MACHINE FEATURES - Position detection of the movable unit via direct measuring system with magnetic tape - 2 carbide-tipped saw blades, diameter 500mm - Pneumatically operated full safety covers over the cutting area - 2 pneumatic horizontal clamping units with low-pressure safety device - Profile support roller conveyor - Lubrication system: mist spray or minimum quantity pulse spray system (depending on version) - Cuts with saw blades Ø 500 mm in the miter range from 22°30’ (external) to 90° - Manual profile support - Pre-installed interface for automatic activation of MG4 chip extraction unit - Two standard profile inserts - Metric scale - Label printer incl. label peel-off function - Overlength cut - Shortcut - Cross cut - Macro - Automatic cut - Pro software package

Condition: good (used), cutting height (max.): 200 mm, chain width: 400 mm, input voltage: 380 V, height adjustment type: electric, rotational speed (max.): 3,400 rpm, power: 2 kW (2.72 HP), MAX cutting depth: 200 mm Chain width: 400 mm MAX distance between exterior blades: 380 mm Blades diameter (min/max): 250 / 350 mm Adjustable feeding speed (inverter): 5 – 30 mt/min MIN workpieces lenght: 1000 mm Blade holder diameter: 70 mm Kjdstvpfmjpfx Afiodu Spindle shaft speed: 3.400 RPM Main motors power: 2 x 37 kW

Year of construction: 1992, condition: used, machine/vehicle number: 7375, cutting length: 5000 mm disk of circular saw-Ø: je nach Bedarf 420 - 500 mm Kdsdpfoz E Snjx Afiju space needed: 6400 x 1400 x 1700 mm weight: ca. 1600 kg

Condition: used, NC Multi-Blade - Double-Blade Saw for Light Metal MIKSITZ Year of manufacture: 1991 Circular saw, aluminium circular saw, table circular saw, mitre saw For cross-cutting and notching aluminium profiles Saw blade travel: 500 mm Max. cutting height: 100 mm Saw blade speed: approx. 5000 rpm Installed saw blade diameter: 300 mm Max. saw blade diameter: 400 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz Table size: 1100 x 1100 mm Kdjdpfx Aedzp Snsfiju Table opening: 300 x 1100 mm Working height: approx. 1100 mm Tool holder: SK40 - Several saw blades can be mounted on a single work shaft with double-sided bearing - A long SK40 arbor serves as the work shaft - Belt drive between the drive motor and saw shaft - Table height adjustable via hand crank (to set cutting depth) - Fixtures and stops can be mounted on the table - Saw blade movement via ball screw spindle with servomotor - Single-axis NC control for the cutting movement, LENORD + BAUER type GEL 7541.0000 - Separate control cabinet Space requirement (L x W x H): 1800 x 1600 x 1700 mm Weight: approx. 1100 kg

Condition: used, functionality: fully functional, cutting height (max.): 170 mm, cutting width (max.): 380 mm, working height: 170 mm, type of input current: three-phase, – Italian manufacture TECHNICAL SPECIFICATIONS: – cutting width: 380 mm – cutting height: 170 mm Kdjdpfjw H R R Hox Afisu – motors: 2 x 55 kW – feed motor: 3 kW – height adjustment motor: 1.1 kW – max. blade diameter: 350 mm – spindle diameter: 2 x 60 mm – sleeve diameter: 2 x 80 mm – track width: 350 mm – total power: 114.1 kW – feed speed adjustment via frequency inverter – automatic central lubrication – minimum workpiece length: 800 mm – electric height adjustment – shaft height adjustment – six top pressure rollers – pneumatic hold-downs – five anti-kickback devices – powered lower outfeed roller – connector diameter: 2 x 200 mm – spindle speed: 4500 RPM – machine dimensions (L/W/H): 300 / 220 / 190 cm – weight: approx. 5000 kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Offer – Double Mitre Saw Emmegi Norma 400 We are pleased to offer you the Emmegi Norma 400 double mitre saw – a precise and reliable machine for professional cutting of aluminium and PVC profiles. Technical Data: - Saw blade diameter: Ø 400 mm - Cutting length: up to approx. 4,000 mm, minimum length approx. 485 mm - Saw head swivel range: ± 45° (inwards/outwards) - Drive: Hydropneumatic feed, motor power 2.2 kW per head, braking time approx. 10 s - Workpiece clamping: Pneumatic, horizontal and vertical, with 'low pressure' safety feature - Cooling: Oil-water micro-mist system Kjdpfsw R T Tqex Afisdu

Year of construction: 2020, condition: ready for operation (used), Saw blade diameter: 2x400mm, max. cutting length: 4000mm, cutting angle: +/-45°. Documentation available. On-site inspection is possible. Kdsdpewfg Hbsfx Afisu

Year of construction: 2022, condition: new, angle: 0° - 90° Kodpfsi Ezr Nox Afiedu max cutting length: 1370 mm

Condition: ready for operation (used), Year of construction: 2017, Swift Jet Water Jet Cutting Machine Ex University Machine Cutting Area 1525 x 3050mm Z axis Clearance 220mm Tank Depth 840mm Water Pump Hypertherm HyPrecision 30Hp Kdodpfxow Rg Sas Afisu Positional Accuracy + - 0.015mm Traverse Speeds 15m/min Advanced nesting and cutting software Collision Protection, heavy duty build that will cut almost any material with no heat distortion. *For sale with Jet Machinery Ltd* Stock No: 78971 Serial No: 1160111 Price: £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: as good as new (ex-display), Year of construction: 2025, Semi-automatic under-table crosscut saw, including: - 2 meter roller conveyor to the left of the saw with 1 manual folding stop and 1 pneumatic folding stop - 2 meter roller conveyor to the right of the saw General Technical Data: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm (Z = 108) Rotational speed: 2,800 rpm Compressed air: max. 8 bar Extraction connectors: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Kodpfxow Rcibo Afisdu Working height: 900 mm +/- 20 mm Standard equipment: Automatic protection and pressure device Two-hand operation and safety shield Carbide-tipped saw blade SAFE The ergonomically positioned two-hand control and safety guard around the saw blade ensure absolutely safe operation. Safe, protected, and reliable! ROBUST Legend saws are designed and built to work with challenging materials and hard wood even under tough conditions. The frame is made of thick-walled, fully reinforced and coated steel. Robust, compact, and durable. FAST Compared to a pull or radial arm saw, the LEGEND pneumatically guides the saw blade through the workpiece at extremely high speed. This significantly reduces the physical burden on the operator.

Year of construction: 1992, condition: used, Double-head saw ELUMATEC - model DG 142 - year 1992 - blades 500 mm Kdsdpfx Aepcgz Djfieu

Condition: used, - 2250 mm Cutting width Kjdpfshkm A Njx Afijdu - 80 mm cutting height - 2x 3,7 KW saw motors

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: C123969, saw blade diameter: 500 mm, rotational speed (max.): 2,820 rpm, overall weight: 1,490 kg, tilt adjustment saw blade: 22 °, TECHNICAL DETAILS Speed: 2,820 rpm Number of saw blades: 2 Saw blade diameter: 450 & 500 mm Mitre angle: 22° - 90° Motor Blade motor power: 2.2 kW MACHINE DETAILS Weight: 1,490 kg Motor Blade motor power: 2.2 kW Kdjdpfow Nvxyox Afiou Electrical data Power: 5.3 kW Current: 13 A Voltage: 400/3 V Frequency: 50 Hz Note: The machine will be available from 01.12.

Condition: excellent (used), Year of construction: 1998, cutting diameter 150 mm cutting range min. 150 mm Kdedpfx Ajvwgnwofieu saw blade diameter 400 mm cutting length min. 420 mm cutting lenght max. 4000 mm dimensions of the machine ca. 4800 x 1100 x 1500 mm The double tiller saw is in very good condition and has only been used very little use.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting length (max.): 3,000 mm, saw blade diameter: 380 mm, overall weight: 560 kg, Minimum cutting length at 90°: 520 mm Minimum cutting length at 45° (swiveled): 520 mm Locking positions at 15°, 30°, and 45° Swivel range continuously adjustable from 0° to 45° Hydropneumatic saw feed Saw blade diameter: 380 mm Saw blade speed: 2,800 rpm Voltage: 230/400 V, 3~, 50 Hz Output per motor: 3 kW Kdedpfx Afow Ng Rgjisu Compressed air connection: 7 bar Version: 3 m