Used Double Cross for sale (15,679)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: Hsdezp H R Ejpfx Ak Uefl New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: good (used), BACCI DOUBLE JET Hjdpfx Aoxr Dcwok Usfl The BACCI DOUBLE JET machine with a KUKA robot is an advanced, automated CNC machining center dedicated to the production of wood and wood-based components. The KUKA robot works with the machine's integrated feeder to automatically feed material for processing, significantly increasing efficiency and minimizing the need for manual operation. After the milling and grinding process is complete, the robot automatically retrieves finished parts and places them on pallets, streamlining production logistics and enabling continuous operation without interruptions for manual reloading. This system ensures seamless integration of the robot with the BACCI DOUBLE JET machine, which features dual machining heads and 12 interpolated axes, enabling simultaneous and precise machining of components. Automated material loading and unloading and the integrated feeder system increase efficiency and production repeatability while reducing labor costs and improving operator safety. This machine is primarily used in the furniture and carpentry industries, where high standards of quality and efficiency are required.

Condition: good (used), BACCI DOUBLE JET The BACCI DOUBLE JET machine with a KUKA robot is an advanced, automated CNC machining center dedicated to the production of wood and wood-based components. The KUKA robot works with the machine's integrated feeder to automatically feed material for processing, significantly increasing efficiency and minimizing the need for manual operation. After the milling and grinding process is complete, the robot automatically retrieves finished parts and places them on pallets, streamlining production logistics and enabling continuous operation without interruptions for manual reloading. This system ensures seamless integration of the robot with the BACCI DOUBLE JET machine, which features dual machining heads and 12 interpolated axes, enabling simultaneous and precise machining of components. Automated material loading and unloading and the integrated feeder system increase efficiency and production repeatability while reducing labor costs and improving operator safety. This machine is primarily used in the furniture and carpentry industries, where high standards of quality and efficiency are required. Hedpjxr Ddusfx Ak Usfl

Condition: like new (used), Rotary 2 rack (racks for 18" x 30" trays) multi purpose oven / protein cooker. Previously used for cooking duck meat but can be used for fish, meat, vegetables and ready meals. Can cook with steam only, steam and elevated temperature, dry roast and bake. These are the industry standard in UK ready meals factories. Hsdpfxemrqqto Ak Ujfl

Condition: good (used), Rotary 2 large rack (1m x 1m x 2m) multi purpose oven / protein cooker. Previously used for cooking poultry meat but can be used for fish, meat, vegetables and ready meals. Can cook with steam only, steam and elevated temperature, dry roast and bake. These are the industry standard in UK ready meals factories. Hsdemrqqdepfx Ak Uefl

Condition: like new (used), JBT Double D 2 rack rotary oven. Takes 2 x 18 x 30 racks. Very clean and tidy. For bakery use. Hfodpfx Akjhyuchs Usl

Condition: excellent (used), Protein cooker direct from Meat-free factory. 6 rack capacity. Lovely condition. Hodpfot R Skmox Ak Uofl

Year of construction: 1990, condition: used, Year of manufacture: Sep 2000 New: No Hfjdpfx Akovzyvps Uol No guarantee. Please contact us if you can't find what you are looking for.

Condition: like new (used), Range (depending on lighting conditions): up to 15 m Range with laser receiver: 30 m and more Leveling accuracy at 5 m: +/- 1 mm Self-leveling range: 4° +- 0.5° Accuracy of the horizontal line at 5 m: +- 1.5 mm Accuracy of the vertical line at 3 m: +- 0.75 mm Hfjdpfx Akod Ecncs Uol Number of laser lines: 2 Weight: 485 g

Condition: used, Vesto saw with two discs for sale - electric motor: 2 x 7.5 kW, - complete with hydrostation, Hsdpfx Aetqt T Isk Usfl - electrical cabinet.

Condition: used, XK400×1000 Rubber & Plastic Mixing Mill – High-Performance Two-Roll Mill Manufacturer: Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. Model: XK400×1000 Main Technical Data: Roll diameter: 400 mm Working length: 1000 mm Front roll speed: 14.85 m/min Rear roll speed: 18.85 m/min Speed ratio: 1 : 1.27 Max roll gap: 10 mm Batch capacity: 25–35 kg Motor power: 37 kW (Siemens IE3 motor) Control system: Siemens S7-300 PLC with Profibus Hsdpfxexrc Eqj Ak Usfl Length: 4400 mm Width: 1710 mm Height: 1850 mm Weight: ~8500 kg Description: The XK400×1000 Mixing Mill is a heavy-duty two-roll open mill designed for rubber and plastic compound mixing, warming, and sheeting. Built with precision alloy rolls, Siemens electrical control, and a robust gear transmission system, this machine ensures stable, low-noise operation, high efficiency, and long service life — perfect for industrial rubber production, laboratories, and plastic processing plants. Key Features: Alloy chilled cast iron rolls – HS70±2 hardness for long life Water-cooled drilled rolls with rotary joints for temperature control Low-noise gear drive with hardened gears Motorized roll gap adjustment (0.5–10 mm) Forced thin-oil lubrication system 4 emergency stop buttons for operator safety Premium Siemens control & electrical components Applications: Rubber compounding and mixing Sheet forming for rubber and plastics Hose, seal, and belt production

Condition: used, XSK-400 Rubber Mixing Mill – Two-Roll Open Type | Wuxi Double Elephant Manufacturer: Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. Model: XSK-400 Country of Manufacture: China Technical Data: Roller Diameter: 400 mm Working Width: 600 mm Roller Speed ​​Ratio: 1 : 1.35 Front Roller Speed: 17.45 m/min Main Motor Power: 45 kW Motor Speed: 980 r/min Voltage: 380 V Frequency: 50 Hz Batch Capacity: Approx. 20-30 kg Machine Weight: Approx. 7,000–8,000 kg Description: The XSK-400 Mill for Rubber is a high-quality two-roll open mixing mill manufactured by Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. (China). Designed for rubber compound mixing, warming, and sheeting, this machine ensures stable performance, precise temperature control, and long-term durability. Perfect for industrial rubber production, hose and seal manufacturing, and laboratory compound processing. Hfjdsxrdgvopfx Ak Uol Main Features: Heavy-duty chilled cast iron rolls with excellent hardness and finish Water-cooled drilled rolls for temperature stability Low-noise hardened gear transmission for smooth performance Motorized nip adjustment for roll spacing precision Safety stop controls and reliable electrical components Durable construction, easy maintenance, and long service life Applications: Rubber and silicone compound mixing Plastic and rubber sheeting Hose, gasket, and belt manufacturing

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM Hedofv Hphspfx Ak Ujfl The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: used, Webomatic Mobile Double Chamber Vacuum Packer Type: CD 120-PR Serial number: 5710JL525 400 V, 3 Ph, 50 Hz, 5.0 A, 2.2 kW Seal length: (2x) 640 mm Dimensions chamber: (2x) 650 mm x 570 mm Busch vacuum pump Total dimensions: 1420 mm x 840 mm x 1060 mm. Hfsdpfx Akoym U Ins Uol

Condition: ready for operation (used), Year of construction: 2012, operating hours: 926 h, functionality: fully functional, machine/vehicle number: 546324, saw blade diameter: 500 mm, cutting width (max.): 300 mm, overall weight: 1,500 kg, saw blade length: 7,209 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. saw blade length: 7,209 mm Max. saw width: 300 mm Max. saw blade diameter: 500 mm Arbor saw blade diameter: 85 mm Infeed table length: 7,850 mm Outfeed table length: 2,400 mm Hedpfx Aszzbfbjk Uefl MACHINE DETAILS Voltage: 400 V Current consumption: 22 A Fuse: 25 A Main motor power: 7.5 kW Connected power: 11 kW Dimensions & Weight Dimensions (L x W x H): 11,250 x 900 x 1,800 mm Weight: 1,500 kg Operating hours: 926 h EQUIPMENT CE marking

Condition: excellent (used), Catalog number: 8051 TECHNICAL DATA - max. blade diameter: 300mm - spindle diameter: 30mm - blade guards: 2 pcs - pneumatic cutting (blade movement: up/down) - sawing units adjustable at a 45° angle - manual adjustment of sawing unit spacing - min. cutting length at 90°: 280mm - max. cutting length at 90°: 3020mm - cutting height at 90 degrees: 90mm - pneumatic clamps: 2 pcs - control pedal - material support Hjdpfozrwrfsx Ak Uefl - main motor: 2 x 2kW - dust extraction nozzle diameter: 2 x 60mm - dimensions (L/W/H): 3520x900x1450mm - weight approx. 500kg ADVANTAGES – unpainted – tilting sawing units – DTR documentation Net price: 15900 PLN Net price: 3790 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to exchange rate fluctuations) – used saw, very good condition

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - Max. saw blade diameter: 300 mm Hfjdpfxszulu To Ak Uol - Spindle diameter: 30 mm - Blade guards: 2 pieces - Pneumatic cutting (up/down blade movement) - Saw units adjustable at 45° - Manual spacing adjustment of the saw units - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2820 mm - Cutting width: 110 mm - Cutting height at 90 degrees: 90 mm - Pneumatic clamps: 2 pieces - Foot switch - Material support - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3620x1100x1250 mm - Weight approx. 500 kg – Unpainted – Tilting saw units – Used saw, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the exchange rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 6946 TECHNICAL DATA - Max. working width: 210mm Hfjdpfszr I Rlex Ak Ujl - Max. working thickness: 120mm - Number of spindles: 2 pcs - Spindle diameter: 50mm From above: - 3 infeed feed rollers, rubber, smooth, including 2 double rollers - 2 outfeed feed rollers, rubber, including 1 double roller - Cutterheads on supports - Cutterhead up/down adjustment - Electric adjustment of top cutterhead height - Electric setting of planing thickness - Spindles equipped with brake - Main motor: 2×5.5kW - Stepless feed speed adjustment - Feed motor: 3kW - Feed via Kardana shafts - Extraction nozzle diameter: 2x160mm - Dimensions (L/W/H): 2350x1780x1950mm - Weight: 1882kg – Made in Germany – Jointers for sharpening knives on the cutterhead – 2 Hydro cutterheads included – Not repainted – Very good condition, used planer Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), SCM internships in excellent condition Hfsdpfx Ast Hkq Rjk Uel

Condition: good (used), GMP Surelam-Pro 500D Roll Laminator Production-ready, This high-quality machine is manufactured in Korea. Description: The GMP SURELAM laminator is a professional roll laminator with a working width of 500 mm. This laminator is ideal for a small printing company, advertising agency, or office. This device allows us to laminate a variety of materials thanks to independent heating control of the upper and lower rollers. Electronic lamination process control and two operating modes: manual and automatic, make working with this machine easy and enjoyable, and ensures laminations are always of the highest quality. The laminator offers single- or double-sided lamination options. Includes laminating pouch Technical specifications: – Maximum laminating width: 500 mm – Pouch thickness: 25-500 microns – Lamination speed: 700 mm/min – Pressure adjustment: manual Hodpfezlgb Asx Ak Usfl – Temperature control: digital – Power supply: 230 V – Power: 3000 W

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,813 kg, axle configuration: 3 axles, first registration: 04/2021, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2021, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. Variable height double deck V7 1650 for 11x3 EURO pal with 22 ALU beams. THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation. Insulated double rear doors (FP, NX17) foam with double s/steel lockrods. Plastic toolbox with cover holder, sleeves and drawer behind the unit. Black plastic fuel tank SCHMITZ 245l, 1 filling neck ; BIO-Diesel proofing. Tyres - 385/65R22.5. Hfjdpfx Akjzlcm Ue Uol Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unladen) - 4008mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes). Tyres Information Front left - 13 mm Front right - 13 mm Middle left - 8 mm Middle right - 8 mm Rear left - 10 mm Rear right - 10 mm

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,927 kg, axle configuration: 3 axles, first registration: 03/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Loading capacity 33 / 66 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 710 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Hfsdpsz Agkxofx Ak Uol Front left - 13 mm Front right - 13 mm Middle left - 14 mm Middle right - 13 mm Rear left - 12 mm Rear right - 12 mm

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,577 kg, axle configuration: 3 axles, first registration: 08/2023, total length: 13,550 mm, total width: 2,600 mm, suspension: air, wheelbase: 760 mm, color: white, Year of construction: 2023, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. Variable height double deck V7 1650 for 11x3 EURO pal with 22 ALU beams. CARRIER VECTOR 1550, with E-Motor and battery. Installation package for mono temp fridge,SKO. FP double leaf insulated rear door, NX17 foam, w. double stainl. steel lock. mech Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck; BIO-Diesel proofing. Tyres 385/65 R22.5. Overall length - 13550 mm. Overall trailer width - 2600mm. Total height (unladen) - 4000 mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes). Lifting front axle. 1 insulated ventilation flap in the left hand rear door at the top. Tyres Information Front left - 9 mm Front right - 8 mm Middle left - 8 mm Hfjdpfx Ajz Agi Ijk Ujl Middle right - 9 mm Rear left - 10 mm Rear right - 10 mm

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Double mitre saw with 5 NC axes suitable for aluminium and light metal alloys, featuring automatic movable head adjustment and electronic control of all angles from 22°30' (internal) to 45° (external), with a fine-resolution of 280 positions per degree. The 600 mm saw blades offer two different feed modes. The standard feed optimises the cutting chart vertically for profiles taller than 450 mm. The radial mode utilises an extended stroke beyond the vertical reference plate, producing a large cutting chart horizontally for profiles up to 240 mm wide. Hfjdpfx Aez Ady Dsk Usl Accessories: - Pro software package: Overlength / Shortcut / Cross-cut / Wedge cut - Pneumatic profile supports - Data import from external software (LogiKal / Schücal / MAP / TXT / Excel, etc.) - Additional clamps - Additional material support - Short part clamp for automatic and semi-automatic cutting - Additional clamp on roller conveyor - Motorised feed - Safety hood with adjustable opening width for improved noise and dust protection The saw has extremely low operating hours and cutting cycles! It is in excellent condition. Only 13,000 cuts and 900 operating hours! Twin-head cutting-off machine with 5 NC axes for aluminium and lightweight alloys, with automatic mobile head movement and electronic management of all angles from 22°30’ (internal) to 45° (external) with a resolution of 280 positions per degree. The 600 mm saw blades have two distinct feed modes. Standard feed optimises the cutting chart in the vertical direction for cutting profiles over 450 mm in height. The radial mode utilises a large stroke beyond the vertical reference plate, generating a large cutting diagram horizontally for profiles up to 240 mm wide.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, overall weight: 1,900 kg, Emmegi Twin Electra 500 double miter saw with 3 CNC-controlled axes Cutting length 5000mm - longer in automatic mode, with automatic repositioning of the saw up to 10000mm Overhauled/like-new double miter saw with saw blades D=500 mm The machine can be motor-driven to swivel from 135 to 22.5 degrees and has a cycle control system. Software options for short cuts, macros, overlength cuts, crosscuts and cycle cuts are also available for this machine. Data transfer is possible (Orgadate, Schücal, etc.) Accessories: Hfjdpfsz Adywsx Ak Uel Moving roller conveyor, tensioner on roller conveyor, automatically extendable profile support between the heads.