Used Double Column Presse for sale (25,021)

Condition: used, Year of construction: 1990, pressure 500 t distance between columns 1220 mm stroke 600 mm Dedpfx Afovut Tbonoul distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1600 x 1200 mm pressure of drawing cushion in table 320 t stroke of drawing cushion in table 150 mm drawing cushion surface in table 750 x 625 mm pressure of drawing cushion in ram 180 t stroke of drawing cushion in ram 100 mm drawing cushion area in ram 750 x 625 mm ram surface 1600 x 1200 mm table height over floor 800 mm speed down 665 mm/s speed up 530 mm/s working speed 34 - 100 mm/s quantity of oil 2000 l power requirement 180,0 kW weight 40,0 t Dimensions (WxDxH) 3,2 x 2,4 x 7,5 m Depth of foundation pit 4,1 m Height above floor 5,55 m YOM 1975 - Overhaul 1990 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table and ram depth of the foundation pit approx. 4,1 m as is where is, WITHOUT putting into operation

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, Travel distances: X-axis (longitudinal) 3200 mm Y-axis (transverse) 2100 mm Z-axis (vertical) 900 mm Working area: Table clamping surface 3000 x 1700 mm Spindle nose to table 66 – 966 mm Table load capacity 11000 kg 5-axis fork head: Tool holder HSK 63 A C-axis (4th axis) +/- 360° Dodpfxex H Srlj Afnsul B-axis (5th axis) +100° / -110° Main drive: Drive type Motor spindle Drive power 63 kW Spindle speed: Spindle speed 18000 rpm Torque 106 Nm Max. rapid traverse: X and Y axes 15000 mm/min Machine weight: 37700 kg Accessories: HURCO CNC Machining Center DCX 32-5 Si (ATC 60) with MAX5 control - AXS control with detachable electronic handwheel - Pentium technology, SSD (Solid-State Drive), 2 GB RAM, Ethernet interface, USB interface, built-in self-diagnosis system, WINDOWS platform - Rigid tapping (tapping without compensation chuck) - 60-position tool changer - 5-axis fork head - Motor spindle - Spindle cooler - Chip conveyor 5-axis simultaneous machining, enabling simultaneous movement of 4 or 5 axes in NC operation.

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509, Year of manufacture 1971 Pressure capacity 50 tons Column width 550 mm Column side clearance 150 mm Table surface 480 x 380 mm Table opening Ø 70 mm Ram surface 490 x 280 mm Clamping pin bore Ø 40 mm Max. ram stroke 150 mm Max. installation height 390 mm Table height above floor 890 mm Rapid forward speed approx. 130 mm/sec. Working speed approx. 20 mm/sec. Return speed approx. 130 mm/sec. Motor power: 4 kW Power supply: 380 volts, 50 Hz - Continuous press force adjustment - Rapid stroke and working stroke - Pressure- or stroke-dependent stroke limitation - Adjustable pressure hold time, press time extension 0.5-6 seconds Dusdpfev Srfwex Afnol - Mechanically adjustable fixed stop via handwheel on the ram - SICK light barrier, type LVU - Stroke counter - Double column guide on the ram Space requirement: L x W x H: 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Condition: used, Year of construction: 2017, Dahlih DCM 4225 Double Column Machining Centre with Fanuc Series Oi-MF, Table Size 4000 x 2200mm, Travel X/Y/Z= 4200/2000/800mm, Max Table Load 12,000kgs, 40 Tool ATC, Spindle Taper BT50, Max Spindle Speed 6000rpm, Main Motor 26kW (35HP), 20 Bar Through Spindle Coolant, 4th Axis Interface, 300mm Column Extension, Right-Angled Head, Renishaw RMP 60 Probe, Swarf Conveyor, Floor Space 5650 x 11120 x 4130mm, Machine Weight 40,000kgs. S/No. 3006030013 (2017) Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Duedjx E Ukhjpfx Afnol

Condition: like new (used), Year of construction: 2019, pressure:400 t Dodpfx Afjfh Izmjnoul stroke:900 mm Table dimensions:1200 x 1200 mm Deep-Drawing Pillow:150 t travel away deep-drawing pillow:280 mm Daylight Opening:1100 mm

Condition: like new (used), Year of construction: 2022, x-travel 2500 mm y-travel 3500 mm z-travel 1500 mm Control HEIDENHAIN TNC 640 c-axis +-360 ° milling head -swivable ° Duedpsvwgtyefx Afnsl milling head swivable ca. +-360 ° table dimension - longitudinal 2500 mm table dimension - cross 3500 mm table load 6 t/m² coolant IKZ 70 bar Feed speed 60 m/min. spindle turning speed range 24000 U/min tool taper HSK-A63 milling spindle motor S6 (40% / 2 min) 41 kW max. torque on the spindle S6 (40% / 2 min) 49 Nm milling spindle motor S1 (100% / 2 min) 34 kW max. torque on the spindle S1 (100% / 2 min) 39 kW tool change unit 60 Pos. weight of the machine ca. 74 t dimensions of the machine ca. 4 x 7.5 x 5.4 m This thermosymmetrical, ergonomic, universal ZIMMERMANN FZU32 portal milling machine is in mint condition and available immediately. DESCRIPTION: The FZU32 is a remarkably compact 5-axis portal milling machine for machining aluminium machining of aluminium, fibre composites, plastics, ureol and steel. steel. Thanks to the particularly rigid, newly developed centre-guiding gantry, we can meet the increasing requirements in model, tool and mould making. mould making. This thermo-symmetrical design makes the FZU32 less susceptible to adverse environmental conditions.

Condition: used, Year of construction: 1973, pressure 500 t distance between columns 1620 mm stroke 40 - 160 mm no. of strokes 32 / 48 Hub/min dayligth (stroke and adjustment up) 660 mm column travel -side 400 x 430 mm table surface area 1600 x 1300 mm table height over floor 750 mm ram surface 1400 x 1200 mm power requirement 44,0 / 66,0 kW weight of the machine ca. 56,00 t required space 3,55 x 2,55 x 5,1 m with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation Dusdpfx Asvuk Euefnjl Video of 'sister maschine' available

Condition: used, Year of construction: 2001, SanGiacomo Press Model: T250 DM Duedpjx Ex Dxofx Afnel Pressing force: 2,500 kN Stroke adjustment: 21 - 230 mm Ram adjustment: 120 mm Stroke rate: up to 75 strokes/min Ram surface: 2,300 x 1,090 mm Table surface: 2,300 x 1,090 mm Dimensions: 3,550 x 1,910 x 5,200 mm (LxWxH) Machine weight: 42,000 kg

Condition: used, Double-column hydraulic press RASTER ZEULENRODA (WALTER) Type WUP-S 60 Mach. No. 707, built in 1994 Pressure capacity 60 tons Column width 1090 mm Side clearance 275 mm Ram surface 890 x 540 mm Table surface 990 x 540 mm Max. ram stroke 300 mm Installation height 390 mm Table height above floor 900 mm Hydraulic operating pressure 250 bar Rapid downward speed 47 mm/s Rapid upward speed 75 mm/s Working speed 15 mm/s Return speed 37 mm/s Motor power 15 kW (2 x 7.5 kW) Power supply 400 volts, 50 Hz, 15.85 kW - SICK light barrier, type LVS 600 - Manually adjustable limit switch cams for stroke limitation Duodpfxev Srfdj Afnol - Press force adjustment via handwheel - Continuous press force holding time adjustment - Two-hand operation on the machine - Additional ram plate Guided by two lateral guide rods, Ø 50 mm - Table top with 18 mm T-slots, slot spacing 185 mm - Table top through hole Ø 100 with insert reduction to Ø 30 mm - Ram plate with 40 mm bore and clamping screw - Electrical cabinet on the side of the machine stand - 3 monitored safety valves for the hydraulic system - Accident prevention regulations for manual insertion work - Electrical circuit diagram Space requirement L x W x H 1900 x 1350 x 2570 mm Weight 3.1 tons Good condition

Condition: excellent (used), Year of construction: 2024, travel distance X-axis: 4,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,000 mm, table length: 4,000 mm, table width: 2,500 mm, table load: 12,000 kg, X AXIS (WORK TABLE) 4,200mm Y AXIS (SADDLE) 2,600mm Z AXIS (HEAD) 1,000mm TABLE SIZE 4000mm*2500 Djdjx Evzuspfx Afnoul T-SLOT SIZE 11x22mmx200mm DISTANCE FROM TABLE SURFACE TO GROUND 890 mm MAX. TABLE LOAD 12,000 SPINDLE TAPER (BT/CAT) BT50/CAT50 SPINDLE SPEED RPM(BT50) 6,000rpm RAPID TRAVERSE(X/Y/Z) 10/10/10M/Min. CUTTING FEEDRATE(X/Y/Z) 1~8000mm/min MAGAZINE CAPACITY FOR ARM TYPE 32 TOOL MAX. TOOL DIAMETER(WITH ADJACENT POCKET EMPTY) BT50-Ø125MM MAX. TOOL LENGTH 300mm MAX. TOOL WEIGHT 20 kg Tool Change Time(T TO T/C TO C) 8/12 SEC.

Condition: used, pressure 160 t distance between columns mm stroke 200 mm table surface area 2040 x 840 mm throat 450 mm no. of strokes 30 - 55 Hub/min dayligth 450 mm ram surface 1700 x 800 mm ram adjustment 100 mm total power requirement 11 kW weight of the machine ca. 21,1 t dimensions of the machine ca. 2,2 x 1,94 x H 3,66 m Dsdpfjtqm Dgox Afnsul - safe for hand inlay work - Conversion to West - Photoelectric barrier

Condition: good (used), Capacities: Capacity 360 mm diameter , Djdpfsig T Abex Afneul Rectangular 704 x 360 mm at 90 degrees or 340 mm diameter , Rectangular 400 mm x 340 mm at 45 degrees. Input 415/3/50 4kw approx. Speeds 20-120 meters per min. Swivel frame 0-45 degrees. Vice opens 710 mm. Measuring Head. Infeed / Outfeed powered rollers. Infeed / Outfeed Cross transfers

Condition: used, Year of construction: 1985, pressure 500 t distance between columns 3100 mm Dodpfx Aovut N Aefnjul stroke fix 300 mm no. of strokes 20 - 70 Hub/min dayligth (stroke and adjustment up) 1000 mm column travel -side 1400 mm table surface area 2800 x 1600 mm ram surface 2800 x 1450 mm power requirement 90,0 kW weight of the machine ca. 100,00 t required space 5,75 x 3,2 x 7,8 m ram adjustment 100 mm height over floor 6,4 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation, stored in dismantled condition (no PLC + main motor available)

Condition: used, Year of construction: 1980, Technical details: Dodpju Nfhdefx Afnsul pressure: ca. 100 t distance between columns: 500 mm throat: bis Mitte Stößel / up to center ram: 350 mm dayligth: 450+100 mm min. ram stroke: 26 mm max. ram stroke: 152 mm ram adjustment: möglich/possible mm ram surface area: 550 x 400 mm clamping table: 1020 x 710 mm total power requirement: 10 kW weight of the machine ca.: ca.7 t space requirement approx.:: L:2,0 x B:1,7 x H:3,2 m WITHOUT drawing cushion Can be demonstrated in idle run. i.D. *

Condition: used, Year of construction: 2013, functionality: limited functionality, saw band length: 2,950 mm, saw band width: 27 mm, total height: 1,680 mm, total width: 1,950 mm, feed length Y-axis: 500 mm, cutting width (max.): 245 mm, overall weight: 1,000 kg, cutting height (max.): 230 mm, table width: 245 mm, table length: 2,800 mm, working height: 890 mm, section length (max.): 9,999 mm, space requirement width: 1,950 mm, space requirement length: 2,900 mm, space requirement height: 2,100 mm, empty load weight: 1,000 kg, Further technical details can be found in the operation and maintenance manual, which will be provided upon sale. Dsdjx Dirzspfx Afnsul If you have any further questions, please feel free to contact us by phone or email. Best regards, Weber Geländersysteme

Condition: excellent (used), Year of construction: 2024, travel distance X-axis: 2,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, table length: 3,500 mm, table width: 2,500 mm, spindle speed (max.): 24,000 rpm, torque: 39 Nm, Drives – Linear axes Feed rate X-, Y-, Z-Axis up to 60 m/min Acceleration X-, Y-, Z-Axis up to 3 m/s² Drives – Rotary axes – VH10 Feed rate A-, C-Axis 180 °/s Acceleration A-, C-Axis 700 °/s² Resolution A-, C-Axis 0,0001° Accuracy – Linear axes, according to VDI/DGQ 3441 according to ISO 230-2 Positioning accuracy X- Axis P≤ 0,015 mm A≤ 0,011 mm Y- Axis P≤ 0,017 mm A≤ 0,013 mm Duodpfxsx Elhqe Afnol Z- Axis P≤ 0,013 mm A≤ 0,010 mm Repeatability X- Axis Ps≤ 0,007 mm R≤ 0,006 mm Y- Axis Ps≤ 0,008 mm R≤ 0,007 mm Z- Axis Ps≤ 0,006 mm R≤ 0,005 mm Milling spindle - 34 kW Spindle power S1 (100% ED) 34 kW S6 (40% / 2 min) 41 kW Spindle speed 24.000 min-1(Permanent grease lubrication ) Torque S1 (100% ED) 39 Nm S6 (40% / 2 min) 49 Nm Constant power 8.260–24.000 min-1 Swivel axis – spindle nose 250 mm Tool holder HSK-A63 Tool clamping Spring clamp Tool unclamping Hydraulic Blowing air supply external and through tool Coolant supply external and through tool

Condition: used, pressure 200 t throat - mm stroke 250 mm Table dimensions 2420 x 840 mm ram surface 1850 x 650 mm dayligth 500 mm ram adjustment 110 mm distance between columns 1900 mm table height 170 mm no. of strokes 25 - 45 Hub/min total power requirement 22 kW dimensions of the machine ca. 2550 x 2370 x 3820 mm weight 30 t Dsdpegk Rfzefx Afnsul - pneumatic clutch - press safety valve, Herion - cam switch, Balluff - chain break monitoring - hydr. overload, Hydac - motor. alide adjustment with digital display - separate control cabinet with safety control ABB - separate two-hand control panel with foot switch - slidable side protective doors - front protection by light barriers vertical + horizontal The machine shown and described above is safe for hand inlays. The machine is also in anorther variant or also can be used as an automatic feeder. Equipment possible according to customer agreement.

Condition: used, Year of construction: 1972, Pressure 800 t distance between columns 3250 mm stroke 1100 mm Distance table/ram, stroke up 1900 mm Table surface area 3100 x 1900 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 300 mm Die cushion area in table 2500 x 1800 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 200 mm Dsdpfovuuhyjx Afnoul Die cushion area in ram 2200 x 1000 mm Ram surface 3100 x 1900 mm Side window 900 mm Oil volume 4700 l Power capacity 200,0 kW Dimensions (WxDxH) 4,95 x 3,3 x 10,2 m Height above floor 7,05 m with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Technical details: pressure: 80 t distance between columns: 880 mm dayligth: 200 mm Table dimensions: 880x300 mm height over floor: 1000 mm distance between columns: 800 mm total power requirement: ca. 12 kW machine weight ab.: 2855 kg space requirements of the machine approx.: T:1,4xB:1,65xH:1,9 m Embossing - Hot Embossing application area: - for example: for foils, plastics, paper, hardboard materials etc. Duodju Icwtjpfx Afnol - stamp plate size: 600x310mm equipment: - counter - hydr. tank Accessories: - Mounting plate (600x300x90mm) not heatable. Sale as is. *

Condition: excellent (used), Year of construction: 2023, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 800 mm, table length: 1,200 mm, table width: 1,000 mm, spindle speed (max.): 18,000 rpm, Max. feed rate of interpolating axes m/min 35 Max. power installed kVA 65 Max. current requested A 93 Table length mm 1200 Table width mm 1000 Load capacity (centered and evenly distributed) kg 3000 Air flow required for the pneumatic system Nl/min 400 Working pressure of the pneumatic system bar 6 Distance between the table surface and the spindle nose mm 105-905 (in 4.13- 35.62) Max. horizontal passage mm 1430 Height of table surface over the floor mm 800 (in 31.49) The table has 18mm H11 T-slots (central slot H7) for the workpiece clamping, distance 100mm (9 slots). Dedpjx Dihisfx Afneul

Year of construction: 1986, condition: used, pressure 40 t dayligth 250 mm stroke 8 - 50 mm table clamping surface LxW 620 x 450 mm table height over floor 980 mm Dujdpecb T Twofx Afnjl no. of strokes 85 - 500 Hub/min distance between columns 680 mm ram - range of adjustment 50 mm number of T-slots 4 ram surface mm total power requirement 8 kW dimensions of the machine ca. 2,3 x 2,2 x 2,8 m weight of the machine ca. 5,8 t - Unidor Tool monitoring - Kaiser gripper feed, band width 180 mm, feed length 150 mm - Kaiser scrap shear on the left side - soundproof cladding

Condition: used, Year of construction: 1973, Pressure 1600 t distance between columns 4100 mm slide stroke 1450 mm Distance table/ram, stroke up 2750 mm distance table/blank holder, stroke up 2200 Table surface area 4000 x 2200 mm ram pressure 1000 t Pressure of blank holder 600 t stroke of blankholder 1000 mm blank holder surface 4050 x 2200 mm Ram surface 3200 x 1650 mm pressure of drawing cushion in table 360 t Die cushion stroke in table 300 mm die cushion area 3500 x 1600 mm Side window 1100 mm Oil volume 9000 l Power capacity 390,0 kW Weight 250,0 t Dusdpfx Ajvut Ifofnsl Dimensions (WxDxH) 5,95 x 4,3 x 10,5 m Height above floor 8,6 m with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram stored in dismantled condition - Video at seller’s site before dismantling available

Year of construction: 1986, condition: used, pressure 015 t dayligth - mm strokes per minute 200 - 2000 table surface area - mm ram surface 490 x 200 mm Dusdpfx Afofn Apxsnjl sheet width 5 - 50 mm adjustment of stroke 10-30 mm weight 3 t dimensions 1370 x 1200 x 2200 mm Drive 10 kW hole in the table 350 x 100 mm table width 530 / 210 mm table length 530 / 350 mm

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 Dodpfx Aovut Dyofnjul with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

Condition: used, pressure 160 t dayligth 600 mm Duodpfxscgqvps Afnel stroke 25 - 150 mm table surface area 1500 x 900 mm ram surface 1500 x 900 mm ram adjustment 100 mm daylight between the columns 1500 mm daylight between the side columns 400 x 200 mm distance between columns 1680 mm weight of the machine ca. 15 t dimensions of the machine ca. 2,7 x 1,8 x 4,4 m