Used Dosing for sale (1,150)

Condition: excellent (used), Epson G10-854SR Robot Assembly Station Dispensing Station Hjdpfsibx S Njx Adaeh The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = heatsink, SW = front wall bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards is conveyed via the transfer belt into the dispensing area. - The WT is stopped at the lift-positioning unit (HuPo), raised off the belt, and secured in place - The X-Y-Z handling system moves the dispensing head to the designated position and initiates the dispensing process. - Once dosing is completed successfully, the handling system moves to the home position and the WT is placed back onto the conveyor - Transfer continues into the assembly area KK+SW (prerequisite: no WT in placement position) St.3.2: Assembly Area KK+SW - A WT transported from the dispensing area enters the KK+SW assembly area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), raised from the conveyor, and fixed in place; during this, the chassis side panels of the partially assembled component are aligned - Simultaneously, the positioning of the KK and SW tray is carried out - Both a KK tray stack (12) and a SW tray stack (12) are manually placed onto each respective infeed conveyor outside of the safety enclosure - The two safety shutters are opened and the loaded tray stacks are conveyed into the gripping position of their respective stackers - The safety shutters are then closed - The respective grippers pick up the corresponding tray - Using the Z-axis, trays are singled and transported upwards (above the actual pick-up height) - To center and stabilize the trays, a centering support is positioned beneath each tray using the X-handling system. - Using the stacker Z-axis, each tray is placed onto its centering support - The trays are now ready for component pick-up - The SCARA robot with a multi-gripper picks up the KK from the tray and places it in an intermediate alignment position (to compensate for inaccuracies in the pick-up and establish a fixed gripping point for assembly) - The KK is scanned, picked up again, and if the scanner result is OK, installed onto the WT - Non-OK KKs are placed in a non-OK container - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position - The SW is picked up again and installed onto the WT - Continue with Assembly Area Front Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, maximum 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Rotational range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Rotational repeatability: J4: +/- 0.005° Maximum work envelope: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Press-in force: 250 N Weight: 48 kg Control: EPSON RC180 Mounting type: Ceiling IP protection class: IP20 Power and signal cables: 3 m Additional assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request.

Year of construction: 1991, operating hours: 13 h, condition: like new (used), functionality: fully functional, Corazza/IMA MD120 portion packer. Hedpfx Aewfn Adjdash Machine for dosing and wrapping mini portions of butter and bouillon cubes in rectangular packs. - Capacity 5400 p/hr up to 7200 p/hr - Current pack size 31x23x11 --> Conversion to other pack size possible - Yom. 1991. - Factory overhaul by IMA 2016. Only 13 running hours since the overhaul. - Paper feed and positioning controlled by photocell - Butter fed by stainless steel funnel with stainless steel auger. - Fully guarded with Lexan doors and windows. (Acc EC regulations.) - Including documentation and EC conformity declaration. - A fully automatic collecting and stacking device in multiple layer configuration can be added. - This machine is basically the similar to the Benhil 8304 As new condition Please contact us for more information, the machine can be seen by appointment.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, The Scheugenpflug dosing system K06399 is a stand-alone dosing machine. The unit is specifically configured to dispense DOWSIL 744 from a 20 kg Hobbock. It features the following axes: X, Y, Z, needle pivotable 45°, carrier rotatable with a lift/rotate unit. A needle cleaning and measuring station is included. The Bosch conveyor belt for the carriers has a fixed width of 400 mm (non-adjustable). Hedsua Acqopfx Adajh Please note: originally, the unit was equipped with inlet and outlet buffers—these components are no longer present, the pictures only illustrate them for reference. Inlet and outlet buffers are no longer included—they are shown for understanding only. / years, not used in the last 2 years due to change of product line.

Condition: excellent (used), functionality: fully functional, total width: 1,500 mm, total length: 3,000 mm, total height: 2,850 mm, Chemical supply station Lotus Used goods, good condition, see pictures Including control unit Length 300 cm Width 150 cm Height 285 cm Power 0.5 kVA Year of construction 10/2007 Already dismantled 3 pieces available Negotiated price: € 2.500,-- net ex stock Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking Hedjtwy I Ijpfx Adaoh from numerous manufacturers in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

Year of construction: 2018, condition: ready for operation (used), Two custom-made, yet reprogrammable and modifiable mixing and metering systems for 2-component polyurethane mixtures are available. 1) Gasketing and foaming system Sonderhoff DM 402, year of manufacture: 2011, mixing head: MK650, output rate: 0.08g–0.15g/s, material: 2K PU foam, robot travel X/Y/Z: 1000mm/800mm/250mm, max. application speed at R=6mm: 9m/min, max. travel speed: 20m/min, max. acceleration: 5m/s², table dimensions X/Y: 485mm/700mm. 2) Gasketing and foaming system Sonderhoff DM 402, year of manufacture: 2018, mixing head: MK125MP, output rate: 0.5g–2g/s, material: Fermapor, robot travel X/Y/Z: 2500mm/1250mm/300mm, max. application speed at R=5mm: 13m/min, max. travel speed: 58m/min, max. acceleration: 10m/s², table dimensions X/Y/Z: 2x 1200mm/1250mm. Both systems include peripheral devices and systems for monitoring and controlling temperature, consistency, mixing, refilling, and other processes. The systems can presumably be adapted to any mixing ratio – exclusively for polyurethane. Documentation available. An on-site inspection is possible. Hedpfxjw Hgltj Adaeh

Condition: used, Year of construction: 2015, functionality: fully functional, total length: 1,500 mm, total width: 1,200 mm, total height: 1,700 mm, The COUDERT pneumatic dosing machine is specially designed to maximize efficiency in the dosing of food products. Thanks to its syringe-type mechanism, it guarantees precise dosing, ensuring consistent dispensing every time. The pneumatic actuator draws the product into a dosing chamber before transferring it to the dosing tool, providing smooth and efficient handling. Furthermore, this dosing machine is equipped with a turntable, which improves production flow. It also facilitates the positioning of packages at the beginning of the line and prevents jams at the end of the process. Thus, it offers a flexible solution for adapting workflows to specific needs. In summary, the COUDERT dosing machine integrates perfectly into packaging lines, providing precise control and optimized production. Thanks to its reliable operation, it helps maintain consistent quality and improve productivity in demanding production environments. Technical specifications: This Coudert Co pneumatic dosing machine operates on the syringe principle. – A pneumatic actuator connects a dosing chamber to a product hopper. – A cylinder equipped with a piston draws the product into the dosing chamber. – The pneumatic actuator then disconnects the connection with the dosing hopper and connects the dosing chamber to the dosing tool. – The cylinder then ejects the product from the dosing chamber. Technical specifications: Manufacturer: COUDERT Year of manufacture: 2015 Length: 1500 mm Width: 1200 mm Height: 1700 mm With a rotating table (dimensions: 920 x 680 x 900 mm (L x W x H)). The turntable operates through the action of a rotating platform on a motorized axis, serving several functions: Start of line: Empty packages are placed on the platform, then positioned by an aligner (optional) to enter the packaging line. Mid-line: Packages can be removed and replaced during packaging for inspection. End of line: Packages are stacked to prevent conveyor jams. Hodpsu Ibb Dofx Adaoh paPtQNCp

Condition: used, Leonhardt dosing machine See video of overall impression. Hsdpjv Dbgbofx Adaoh

Condition: used, Perschroef dosing screw dosing machine All stainless steel Motor power 1.1kW 9.7rpm Diameter screw 150mm Mobile Hsdpfxowyfxro Adaoh Connection DN100 See our other advertisements VMA Wekerom

Condition: good (used), K-Tron dosing machine, dosing screw, weighing filler, dosing unit Type: T-35 Incl. scale with control system and display (functionality unknown) See our other advertisements VMA Wekerom Hodpfxjwyf Iao Adajh

Condition: good (used), Dosing installation bag emptying machine with dosing screw Stainless steel discharge cabinet Hedswyf U Tjpfx Adash Stainless steel dosing screw with movable bottom and pneumatic end valve Filter unit for dust extraction during refilling VMA Wekerom See our other advertisements

Condition: good (used), Stainless steel conveyor, checkweigher, weighing machine, filling machine, scale Hedewyga Rjpfx Adajh Entirely stainless steel construction Spare conveyor belt available Equipped with Siemens PLC control for weighing Weighing up to approx. 10 kg See our other listings VMA

Condition: good (used), Derichs stainless steel dosing machine, dosing unit, powder dosing machine, dosing machine Entirely stainless steel including weighing computer Equipped with dosing belt and mixing belt Hodewygbhopfx Adaoh See our other advertisements

Condition: used, Year of construction: 2015, Manufacturer: Packinov Model: 1015 D Year : 2015 Type: Semi-automatic electric dosing machine Volume digitally adjustable Dosage cylinder available: 2 blocks, max. 85 ml. 3 x hoppers, 1 of which is double-jacketed Hjdpfex R Dhyex Adaoh Mixer for hopper Temperature controller Foot-operated actionner Control panel Height-adjustable frame Machine dimensions: 110 x 100 x 190 cm

Condition: excellent (used), Year of construction: 2011, Machine for dosing dry or liquid ingredients into liquid products such as ice cream or butter, consisting of a dosing unit, lamella transfer pump, horizontal mixer (for butter applications), and control cabinet. The hopper is fitted with a stainless-steel auger feeding the ingredients to the lamella pump; products may be dry or liquid provided sufficient viscosity. Capacity ranges from 200–4,000 l/h for liquid products and 20–400 l/h for dry products. The 70-liter hopper is mounted on three weighing/load cells. The system includes an inline horizontal mixer, is installed on a stainless-steel frame with adjustable feet, and all relevant components are suitable for CIP cleaning. The unit is equipped with two DN100 tri-clamp connections, supplied with documentation in French, and has no local operator panel as operation is centralized. Hodpfox Ttdcex Adaoh

Condition: excellent (used), Year of construction: 2011, Ingredient doser / Fruit feeder. To add a dry ingredient to a liquid like ice cream or butter (this machine). Main components of the unit: 1.) Dosing unit, 2.) Lamella transfer pump, 3.) Horizontal Mixer (used on butter) and 4.) Control panel. Hopper with 1 x SS auger to feed of ingredients to the lamella pump. Product to be dosed can be dry or liquid if it has sufficient viscosity to be retained by the augers. Liquid product capacity 200 - 4.000 liter per hour, dry product capacity 20 - 400 liter per hour. Hopper ± 70 L mounted on 3 weighing/load cells. With inline horizontal mixer. On SS frame with adjustable feet, parts for CIP cleaning. Connections: 2x DN100 Tri-clamp. With documentation (in French). No operation panel (was centralised). Total dimensions: 206x110x163 (lxwxh) cm - weight: 237 kg. Hodpfsx Idh Isx Adaoh

Year of construction: 1990, condition: good (used), Offered is a used row doser. Capacity approx. 20 m³. Hodpekq Dbtsfx Adaeh Manufacturer: Bertram. Weighing belt, 60 belt, length: 20.00 m. Dimensions substructure: H: 6,00 m, W: 2,30 m, H: 3,70m.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: H/32059, feed rate X-axis: 22 m/min, workpiece height (max.): 50 mm, TECHNICAL DETAILS Hodpfxjydibwo Adajh Panel height: 10 mm to 50 mm Solid wood: 12 mm PVC/ABS: 0.4 mm to 3 mm Max. feed speed: 22 m/min Min. panel length: 150 mm Min. panel width: 70 mm MACHINE DETAILS Rectifier group motors: 1.5 kW (2 motors) EQUIPMENT Touchscreen control for adjusting working units Panel support guide Side roller conveyor with idler wheels for panel support Anti-adhesive unit Roll holder plate COMBIMELT glue unit for hotmelt adhesive with automatic VarioMelt dosing and pre-melter Patented edge pressing unit with segmented pads Trimming unit with 2 motors Cleaning unit with 2 motors Rounding unit Edge scraper unit Working height adjustable electronically via C.N. Powered rubberized conveyor with top pressure

Condition: used, Year of construction: 1997, Automatic in-line filling machine: Model: Bosch FLK 6040 CIP Year : 1997 Power: 5 kW Speed: 30-40 bottles/min Conveyor width: 8 cm Transporting bottles from right to left Linear dosing system with 6 stainless steel pistons Filling point: 6 heads Plunger filling head: yes Volume: from 15 to 500 ml Pistons replaced in 2012. Filling accuracy: +/- 0.5% depending on the product Product: liquid/semi-liquid for bottles, flasks, cans Formats : ⌀ 41 to 115 mm Hauteur max : 320 mm Minimum internal diameter of opening: 5 mm Closed hopper Clean-in-place (CIP) module Maximum temperature: 60°C Dimension : 400 x 150 x 320 cm Weight : 2100 kg Several formats and spare parts available.   Capping/screwing machine: Model : VLM 7010 Year : 1997 Power : 10 kW Transporting bottles by conveyor belt. Direction from right to left. Screw, pressure or push-fit sealing system Capacity : 60 units / min Hjdpfxsyfw H Re Adaoh Bottle dimensions: Width: 16 to 90 mm Length: 16 to 135 mm Height: 40 to 280 mm Diameter: 16 to 100 mm Cap dimensions: screw cap: Diameter : 16 à 60 mm Height : 13 à 50 mm Width: 16 to 60 mm Length: 16 to 60 mm pressure cap: Diameter : 16 à 60 mm Height : 13 à 50 mm Width: 16 to 60 mm Length : 16 à 70 mm Machine dimensions: 400 x 130 x 200 cm (+ electrical cabinet 160 x 50 x 170 cm) Weight : 2050 kg  

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,810 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. It's equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine. • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mold height: 330–830 mm • Opening stroke: 675 mm • Max daylight (distance between platens): 1505 mm • Mold weight capacity: fixed side 1100 kg, moving side 2200 kg (total 3300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centering ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1351 bar • Plasticizing rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle bore: 3 mm • Max dosing stroke: 225 mm • Note: Second injection unit listed with no data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment Hodpfx Adjyfq Alsash • Robot/handling: Wittmann W633-961 linear robot • Stroke: Y (vertical) 1600 mm, X 900 mm, Z 2500 mm • Hot runner control: 9 zones • Mold sensing: Kistler pressure (p=1) / temperature (t=0) system • Valve gate control: hydraulic (pneumatic not equipped)

Condition: excellent (used), Eos EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The machine has been serviced regularly (last service: 08/2024). Hodoxw Uyqjpfx Adash It has exclusively processed PA11 (EOS PA1101). The system is offered including accessories: 1 x build box, docking station, multibox with cooler Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been thoroughly inspected." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set: PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. charge: 420 g) Multibox is a typical EOS accessory for powder handling, used for transporting and interim storage of material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): Travel 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Take-off chamber heating: 1.6 kW, resistance heater coil with separate temperature measurement Control & Operation: Process computer with Windows 7 OS 15.1" TFT display, membrane keypad & mouse Ethernet network connection Other: Noise emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Line protection: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see picture) Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Specifications and information are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: used, Automatic machine for lipstick filling Manufacturer: Cosmatic (IT) Model: SM43 Slim Working output up to 2000 pcs/h Device works in silicone mold technology (Long rubbers). Possibility of producing slim lipsticks with an oriented stick. Hsdjyc Tqyepfx Adajh Air cooled. Machine has two refrigeration compressors working alternately. Silicone mold heating by hot air blower (inside) and electrical lamp (outside). Additional heating to prevent the formation of a cone inside the lipstick. Automatic insertion of the stick into the packaging. Automatic screwing station. Manual package loading. Manual capping. Machine equipped with 2 filling heads and melting/dosing pumps. Machine fully functional and still in use. Regularly serviced. New 2016.

Condition: used, Year of construction: 2017, Serial no. 141342-100, control system type Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, maximum daylight 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, maximum mould weight 1,800 kg, minimum mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, screw L/D ratio 22, 1 hydraulic core pull, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/nozzle force 350 mm/40 kN, injection unit/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2020, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 15,564 Hjdpeyc Symofx Adash This item is part of an online auction. Sale is subject to approval by the client.

Condition: used, Chemical Mixer, Stainless Steel Mixer, Chemical Mixer 2000 L, Used Machine Manufacturer: Chemplex Type: T240 Electrical power: Hsdpeyc Sfvefx Adash Heating: 20 kW Mixer motor: 3 kW Weighing system: MS-h10/kn, MS-CT-SQB – maximum weighing capacity 3,500 kg Maximum heating temperature: 90 °C Capacity: 2,000 L Description: General-purpose chemical mixer manufactured by Chemplex with a 2,000-liter capacity, designed with an integrated tank weighing system (3 load cells with indicator). The vessel is an atmospheric tank with a DN100 bottom outlet. Heating is provided by a 20 kW electric bottom heater. The mixer is equipped with a propeller-type agitator. It features a flat lid, which is openable and fitted with a safety grid. The lid includes 4 dosing/inlet nozzles. Recommended operating temperature: 20–60 °C. The bottom discharge nozzle is fitted with a stainless steel ball valve, equipped with a pneumatic actuator and bubble position indicator. The actuator is spring-loaded, providing a fail-safe (safety closed) function.

Condition: used, Year of construction: 2017, Ser.-No. 140228-100, Control system type Unilog B8, clamping force 1,800 kN, tie bar clearance 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, platen gap max. 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, max. mould weight 1,800 kg, min. mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 2 hydraulic core pulls, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/nozzle force 350 mm/40 kN, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2017, sprue picker/robot by Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 17,844 Hjdeyc Staopfx Adash This item is part of an online auction. The sale is subject to the approval of the seller.

Condition: used, Year of construction: 2017, Ser.-No. 138524-100, Control unit: Type Unilog B8, Clamping force: 1,100 kN, Tie bar clearance: 470 x 420 mm, Mould installation height: 200 - 450 mm, Opening stroke: 380 mm, Maximum platen distance: 830 mm, Ejector stroke (hydraulic/electric): 140/125 mm, Ejector force: 25 kN, Dry cycle time: 1.5 s per 294 mm, Maximum mould weight: 1,000 kg, Minimum mould dimension: 296 x 296 mm. Injection unit: Type 350, Screw diameter: 25 mm, Screw stroke: 175 mm, Screw L/D ratio: 22, 1 hydraulic core pull, Calculated shot volume: 85.9 - 220 cm³, Specific injection pressure: 1,595 - 3,000 bar, Maximum screw speed: 350 rpm, Screw torque: 340 - 500 Nm, Nozzle stroke/nozzle force: 250 mm/40 kN. Dosing unit: Manufacturer Movacolor. Injection/dosing unit: Manufacturer Wittmann, Type Feedmax S3-NET, Year 2017. Sprue picker/robot: Manufacturer Wittmann, Type WP80, Year 2018, Travel axes X/Y/Z: 100 x 550 mm x 90°, Compressed air hose reel: Manufacturer Metabo, Type SA250, L 25 m. Machine weight: 4,800 kg, Operating hours: 42,853. This item is part of an online auction Hsdpfxsyc Sqxs Adash Sale is subject to the approval of the client.