Used Dosing for sale (1,132)

Condition: ready for operation (used), A dosing pump (ointment pump) Viscotec for highly viscous liquids is available. Dosing range: 1µl-1l, dosing precision: +/-1%, repeat accuracy: over 99%, flow range: 0.2ml-700ml/min. Including control system and spare parts package. An on-site inspection is possible. Podpfsw R Uzpsx Adnjgw

Condition: like new (used), functionality: fully functional, Volumetric dosing - With built-in Ruhrwerk - Twin screws - Built-in tamping unit for materials with low bulk density Psdpot Akaqsfx Adnegw

Condition: excellent (used), Epson G10-854SR Robot Assembly Station Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = heatsink, SW = front wall bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards is conveyed via the transfer belt into the dispensing area. - The WT is stopped at the lift-positioning unit (HuPo), raised off the belt, and secured in place - The X-Y-Z handling system moves the dispensing head to the designated position and initiates the dispensing process. - Once dosing is completed successfully, the handling system moves to the home position and the WT is placed back onto the conveyor - Transfer continues into the assembly area KK+SW (prerequisite: no WT in placement position) Pedpfxoibx S Ns Adnogw St.3.2: Assembly Area KK+SW - A WT transported from the dispensing area enters the KK+SW assembly area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), raised from the conveyor, and fixed in place; during this, the chassis side panels of the partially assembled component are aligned - Simultaneously, the positioning of the KK and SW tray is carried out - Both a KK tray stack (12) and a SW tray stack (12) are manually placed onto each respective infeed conveyor outside of the safety enclosure - The two safety shutters are opened and the loaded tray stacks are conveyed into the gripping position of their respective stackers - The safety shutters are then closed - The respective grippers pick up the corresponding tray - Using the Z-axis, trays are singled and transported upwards (above the actual pick-up height) - To center and stabilize the trays, a centering support is positioned beneath each tray using the X-handling system. - Using the stacker Z-axis, each tray is placed onto its centering support - The trays are now ready for component pick-up - The SCARA robot with a multi-gripper picks up the KK from the tray and places it in an intermediate alignment position (to compensate for inaccuracies in the pick-up and establish a fixed gripping point for assembly) - The KK is scanned, picked up again, and if the scanner result is OK, installed onto the WT - Non-OK KKs are placed in a non-OK container - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position - The SW is picked up again and installed onto the WT - Continue with Assembly Area Front Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, maximum 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Rotational range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Rotational repeatability: J4: +/- 0.005° Maximum work envelope: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Press-in force: 250 N Weight: 48 kg Control: EPSON RC180 Mounting type: Ceiling IP protection class: IP20 Power and signal cables: 3 m Additional assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request.

Condition: good (used), Year of construction: 2019, Pur melting system with 20-liter drum feed. Pumping system for use on binding lines in combination with the lamination system. Currently installed on an Alegro (Muller Martini). Pgodjwctp Depfx Adnsw

Condition: new, Year of construction: 2025, overall weight: 1,000 kg, power: 1.1 kW (1.50 HP), The Mizar Dosage Bunker is an essential solution for the precise storage and dosing of bulk materials in various industries, including recycling, food processing, and manufacturing. It ensures secure material handling while allowing for accurate and controlled dispensing, improving efficiency and reducing waste. Podpfjv Rvm Aox Adnjgw ✅ Precision Storage & Dosing – Ensures accurate material flow control. ✅ Heavy-Duty Construction – Built to withstand harsh conditions and heavy loads. ✅ Adjustable Outlets & Weighing System – Allows operators to control material flow with high accuracy. ✅ Seamless Integration – Easily fits into existing production lines for optimized workflow. ✅ User-Friendly & Safe – Equipped with safety mechanisms and easy-to-use controls. Dosage width: 750mm Dosage length: 1950mm Dosage height: 1250mm Dosage weight: 1000kg

Condition: used, Stainless steel dosing screw, auxiliary feed screw Entirely stainless steel Screw flight diameter: 150 mm Psdpfx Ajw Abtdjdnsgw Hopper dimensions: 800 mm x 700 mm x 1100 mm See our other listings VMA Wekerom

Condition: ready for operation (used), Suitable for filling sausages, as well as potato and sausage salads, caliber: 55/60mm, throughput: 3-4 sausages/min, capacity per hopper: approx. 100kg, year of construction: 90s, without documentation, an on-site inspection is possible. Pgsdoq Npf Aopfx Adnjw

Condition: ready for operation (used), The FlexWall®Plus FW40/5 is a dosing device for poorly to severely free-flowing bulk materials. It consists of the following assemblies: a trapezoidal stainless steel housing, a flexible polyurethane trough with a large cross-section, massage paddles, a dosing screw, a screw tube, a three-phase drive and a trapezoidal extension hopper with a volume of 50 dm³ or 70 dm³, with a low installation height. The shape of the trough and the external massage paddles with adjustable amplitude ensure a consistent screw fill level and gentle mass flow of the bulk material. Changing the screw on the FW40/5 is only done from the front. The FlexWall®Plus enables easy disassembly for wet or dry cleaning, with the polyurethane trough simply being pulled off the housing rim. Furthermore, the compact trapezoidal design allows space-saving arrangement of up to six dosing units around a central feeding point. Pedpfx Adownr Trenogw

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, The Scheugenpflug dosing system K06399 is a stand-alone dosing machine. The unit is specifically configured to dispense DOWSIL 744 from a 20 kg Hobbock. It features the following axes: X, Y, Z, needle pivotable 45°, carrier rotatable with a lift/rotate unit. A needle cleaning and measuring station is included. The Bosch conveyor belt for the carriers has a fixed width of 400 mm (non-adjustable). Please note: originally, the unit was equipped with inlet and outlet buffers—these components are no longer present, the pictures only illustrate them for reference. Inlet and outlet buffers are no longer included—they are shown for understanding only. Pjdpfx Aoua Acqjdnsgw / years, not used in the last 2 years due to change of product line.

Condition: new, Year of construction: 2025, functionality: fully functional, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Psderivv Eopfx Adnegw Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: used, Tank capacity (litres) 100 Motorized pumps Up to 2 external each tank Dosing capacity Max. 50 cc/sec. per pump Remote technical support Pgsdpsvpfhyjfx Adnew

Condition: excellent (used), Stainless steel feed unit, dosing device, dosing sluice. Feed unit for hammer mill. Entirely made of stainless steel. Inlet dimensions: 615mm x 240mm x 430mm. Psdowygbnspfx Adnjgw VMA Wekerom See our other listings.

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Pgedeh Akm Tspfx Adnjw

Condition: good (used), Derichs stainless steel dosing machine, dosing unit, powder dosing machine, dosing machine Pedpfx Aewygbhsdnjgw Entirely stainless steel including weighing computer Equipped with dosing belt and mixing belt See our other advertisements

Year of construction: 2012, condition: ready for operation (used), Number of filling stations: 8, throughput: 30 cycles/min, connected load: 6kW, with heated double jacket on the storage container, accessories, filling heads, screw conveyor, conveyor belt and documentation, on-site inspection is possible. Pedpfx Adoqygxmonogw

Condition: like new (used), Refurbished stainless steel dosing screw, auger, filling machine, screw dosing Coarse and fine dosing Screw flights can be quickly disassembled for cleaning Motor power 1.1 kW and 0.75 kW Pedowygbbspfx Adnsgw See our other listings VMA

Year of construction: 2018, condition: ready for operation (used), Two custom-made, yet reprogrammable and modifiable mixing and metering systems for 2-component polyurethane mixtures are available. 1) Gasketing and foaming system Sonderhoff DM 402, year of manufacture: 2011, mixing head: MK650, output rate: 0.08g–0.15g/s, material: 2K PU foam, robot travel X/Y/Z: 1000mm/800mm/250mm, max. application speed at R=6mm: 9m/min, max. travel speed: 20m/min, max. acceleration: 5m/s², table dimensions X/Y: 485mm/700mm. 2) Gasketing and foaming system Sonderhoff DM 402, year of manufacture: 2018, mixing head: MK125MP, output rate: 0.5g–2g/s, material: Fermapor, robot travel X/Y/Z: 2500mm/1250mm/300mm, max. application speed at R=5mm: 13m/min, max. travel speed: 58m/min, max. acceleration: 10m/s², table dimensions X/Y/Z: 2x 1200mm/1250mm. Both systems include peripheral devices and systems for monitoring and controlling temperature, consistency, mixing, refilling, and other processes. The systems can presumably be adapted to any mixing ratio – exclusively for polyurethane. Documentation available. An on-site inspection is possible. Pgsdpfew Hgltox Adnjw

Condition: good (used), Stainless steel conveyor, checkweigher, weighing machine, filling machine, scale Entirely stainless steel construction Spare conveyor belt available Equipped with Siemens PLC control for weighing Weighing up to approx. 10 kg See our other listings Pgjdpowyga Refx Adnow VMA

Condition: good (used), Dosing installation bag emptying machine with dosing screw Pjdpowyf U Tefx Adnsgw Stainless steel discharge cabinet Stainless steel dosing screw with movable bottom and pneumatic end valve Filter unit for dust extraction during refilling VMA Wekerom See our other advertisements

Condition: good (used), Stainless steel vibrating chute conveyor with dosing unit Including storage hopper Entirely made of stainless steel With stairs for refilling the hopper See our other listings Pedpfx Adowyf Rnonogw

Year of construction: 2020, condition: good (used), Rotary valve, Comav dosing valve, rotary airlock, drop-through valve Rotor diameter 400 mm Dimensions: see photos Manufacturer: Comav Type: VSD 400 Year of manufacture: 2020 Completely stainless steel Pgsdpfx Adswyf Nwsnew Venturi diameter: 100 mm Motor power: 0.75 kW See our other listings.

Condition: used, Dosing screw, screw conveyor, auxiliary feed screw Material: stainless steel Motor power: 1.5kW 85rpm Pgsdpfxowyf Imo Adnsw Inlet dimensions: 770x410mm Screw flight diameter: 220mm VMA Wekerom See our other listings

Condition: good (used), K-Tron dosing machine, dosing screw, weighing filler, dosing unit Type: T-35 Incl. scale with control system and display (functionality unknown) See our other advertisements VMA Wekerom Pgsdpewyf Iaefx Adnsw

Condition: good (used), Stainless steel screw conveyor feeder screw feeder screw filling screw big bags Diameter screw conveyor 170mm Length screw conveyor 1900mm Outlet 170mm Podjwyf Efjpfx Adnsgw See our other advertisements VMA Wekerom

Condition: used, Perschroef dosing screw dosing machine All stainless steel Motor power 1.1kW 9.7rpm Diameter screw 150mm Mobile Connection DN100 Psdpewyfxrsfx Adnogw See our other advertisements VMA Wekerom