Used Dosing for sale (1,130)

Condition: excellent (used), Dosage filler. Make - FillFlex. Model - F5500A Capacity - 25L/min. Dosage from 20ml-1500ml. Max temperature - 60 degrees or above. Iedpovhbckofx Ah Netb Extra pump housing included and hose pump head for dosing. Various spare parts included. CLH.24

Condition: ready for operation (used), Suitable for filling sausages, as well as potato and sausage salads, caliber: 55/60mm, throughput: 3-4 sausages/min, capacity per hopper: approx. 100kg, year of construction: 90s, without documentation, an on-site inspection is possible. Itjdpfxjq Npf Aj Ah Neb

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Isdpeh Akm Tsfx Ah Notb

Year of construction: 2012, condition: ready for operation (used), Number of filling stations: 8, throughput: 30 cycles/min, connected load: 6kW, with heated double jacket on the storage container, accessories, filling heads, screw conveyor, conveyor belt and documentation, on-site inspection is possible. Isdpsqygxmofx Ah Nstb

Condition: used, Year of construction: 2000, type of input current: three-phase, 1 dosing scale for bulk materials. Most recently used for limestone powder. Container: stainless steel Ijdsv T T H Sspfx Ah Nstb Discharge via screw conveyor

Condition: used, functionality: fully functional, Automatic dosing device for coating the filter plates with dry additive or for applying a filter aid layer. Itodpfx Ahowvh A Eo Njb

Year of construction: 2005, condition: excellent (used), We offer a used dosing hopper with internal dosing belt and internal conveying rake: Dimensions: L: 3.90 m, W: 0.86 m, H: 1.50 m. Belt width: 0.75 m. Including an associated conveyor belt: Isdpfx Aoiuxucjh Nstb Length: 4.20 m, belt width: 0.50 m. Very good condition. Technical details: See photos.

Year of construction: 2018, condition: excellent (used), Sanco Dosing Installation, Year of Manufacture: 2018 Consisting of: Iodpfswf Izaox Ah Netb - 2x insulated 1200-liter tanks with manhole and agitator - Accompanying platform - 2x PROMASS A flow meters with control cabinets - LKH-5 centrifugal pump - Grundfos pump - Plate heat exchanger - Associated piping The installation was previously used for dosing lecithin, but is also suitable for other products. The unit has been dismantled in working condition and is currently stored in our warehouse. We are happy to assist you further upon serious interest in this installation.

Condition: good (used), Stainless steel screw conveyor feeder screw feeder screw filling screw big bags Diameter screw conveyor 170mm Iedpfxswyf Efe Ah Nstb Length screw conveyor 1900mm Outlet 170mm See our other advertisements VMA Wekerom

Condition: used, Dosing screw, screw conveyor, auxiliary feed screw Material: stainless steel Motor power: 1.5kW 85rpm Inlet dimensions: 770x410mm Itodpfjwyf Imox Ah Nob Screw flight diameter: 220mm VMA Wekerom See our other listings

Condition: excellent (used), Stainless steel feed unit, dosing device, dosing sluice. Feed unit for hammer mill. Entirely made of stainless steel. Inlet dimensions: 615mm x 240mm x 430mm. Itodpfx Ahewygbno Nsb VMA Wekerom See our other listings.

Condition: ready for operation (used), A dosing pump (ointment pump) Viscotec for highly viscous liquids is available. Dosing range: 1µl-1l, dosing precision: +/-1%, repeat accuracy: over 99%, flow range: 0.2ml-700ml/min. Including control system and spare parts package. An on-site inspection is possible. Iodpfsw R Uzpox Ah Notb

Condition: used, Name: Dosing system for polymers Manufacturer: Alltech Type: Polymat 1000 V7 KD S Year built: 2003 Content: 1000 Liter Conveying / dosing of: Powdered # Chamber: 2 Control: Yes Driving force: 1: 0,55 kW, 12 0,55 kW Model: Horizontal Dimensions: Length 2000 x width 900 x height 1900 mm Itedpfx Aevt Sdpeh Njb Empty weight: 1000 kg Technical doc.: Yes Accessories: Dry material dispenser type T09K0007 Condition: Second hand Price: On demand

Year of construction: 2020, condition: good (used), Rotary valve, Comav dosing valve, rotary airlock, drop-through valve Rotor diameter 400 mm Dimensions: see photos Manufacturer: Comav Type: VSD 400 Year of manufacture: 2020 Completely stainless steel Venturi diameter: 100 mm Iedowyf Nwopfx Ah Notb Motor power: 0.75 kW See our other listings.

Condition: good (used), Stainless steel vibrating chute conveyor with dosing unit Including storage hopper Itjdpfswyf Rnsx Ah Njb Entirely made of stainless steel With stairs for refilling the hopper See our other listings

Year of construction: 2020, condition: excellent (used), cistern with conveyor in it with in front a dosing auger length 9 meters width 2 meters Ijdpfx Ahsilqfqj Njtb

Condition: new, Year of construction: 2025, EF 600-NG bag-in-box dosing machine - for filling fruit juices, wine, vinegar, oil, etc. * High-quality stainless steel housing * Clear display with important information (current flow rate, remaining quantity, etc.) * preset quantities 1.5, 3, 5, 10, 20 liters * freely adjustable quantities * Cleaning program Itsdst U Iiyspfx Ah Neb * Extensive statistics * Only short downtime due to double holder * Compact design

Condition: new, Year of construction: 2025, functionality: fully functional, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Itedpfxsrivv Eo Ah Neb Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: excellent (used), Epson G10-854SR Robot Assembly Station Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = heatsink, SW = front wall bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards is conveyed via the transfer belt into the dispensing area. - The WT is stopped at the lift-positioning unit (HuPo), raised off the belt, and secured in place - The X-Y-Z handling system moves the dispensing head to the designated position and initiates the dispensing process. - Once dosing is completed successfully, the handling system moves to the home position and the WT is placed back onto the conveyor - Transfer continues into the assembly area KK+SW (prerequisite: no WT in placement position) St.3.2: Assembly Area KK+SW - A WT transported from the dispensing area enters the KK+SW assembly area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), raised from the conveyor, and fixed in place; during this, the chassis side panels of the partially assembled component are aligned - Simultaneously, the positioning of the KK and SW tray is carried out - Both a KK tray stack (12) and a SW tray stack (12) are manually placed onto each respective infeed conveyor outside of the safety enclosure - The two safety shutters are opened and the loaded tray stacks are conveyed into the gripping position of their respective stackers - The safety shutters are then closed - The respective grippers pick up the corresponding tray - Using the Z-axis, trays are singled and transported upwards (above the actual pick-up height) - To center and stabilize the trays, a centering support is positioned beneath each tray using the X-handling system. - Using the stacker Z-axis, each tray is placed onto its centering support - The trays are now ready for component pick-up - The SCARA robot with a multi-gripper picks up the KK from the tray and places it in an intermediate alignment position (to compensate for inaccuracies in the pick-up and establish a fixed gripping point for assembly) - The KK is scanned, picked up again, and if the scanner result is OK, installed onto the WT - Non-OK KKs are placed in a non-OK container - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position - The SW is picked up again and installed onto the WT - Continue with Assembly Area Front Iodpjibx S Nsfx Ah Njtb Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, maximum 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Rotational range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Rotational repeatability: J4: +/- 0.005° Maximum work envelope: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Press-in force: 250 N Weight: 48 kg Control: EPSON RC180 Mounting type: Ceiling IP protection class: IP20 Power and signal cables: 3 m Additional assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request.

Condition: excellent (used), Year of construction: 2007, Laboratory foam dosing station with foam mixer and applicator The system works in a similar way to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be changed during operation. Foam applicator with mixer - Dynamic foam mixer with online dosing of 5 products + water - 5 dosing pumps - One direct inlet for mixing - Product monitoring for the chemicals - Air dosing valve - Dynamic foam mixer with adjustable speed - PLC control - Foam applicator - For one-piece carpets up to 1 m wide applications Stain blocker Dirt, water and oil repellents Fluorocarbons Antistatic chemicals Plasticizers Flame retardants Antibacterial chemicals Moth and beetle repellents Pile stabilizers Anti-hair loss agents Iodpfxju D E A Ds Ah Nstb Resins for wrinkle prevention and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Dosing range: 0.5 - 500 g/l (1:100 with each pump) Foam volume: 50 - 500 l/min Electrical data Connected load: 6kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions HxWxD = 1400 x 2100 x 860 mm Year of construction: 2007 Purchase price: 47600 ,- € Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, Stainless steel dosing screw, auxiliary feed screw Entirely stainless steel Screw flight diameter: 150 mm Hopper dimensions: 800 mm x 700 mm x 1100 mm Isdpfx Asw Abtdoh Netb See our other listings VMA Wekerom

Condition: like new (used), Refurbished stainless steel dosing screw, auger, filling machine, screw dosing Ijdewygbbspfx Ah Notb Coarse and fine dosing Screw flights can be quickly disassembled for cleaning Motor power 1.1 kW and 0.75 kW See our other listings VMA

Condition: excellent (used), functionality: fully functional, total width: 1,500 mm, total length: 3,000 mm, total height: 2,850 mm, Chemical supply station Lotus Used goods, good condition, see pictures Including control unit Length 300 cm Width 150 cm Height 285 cm Power 0.5 kVA Year of construction 10/2007 Iodpfjtwy I Isx Ah Notb Already dismantled 3 pieces available Negotiated price: € 2.500,-- net ex stock Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, The Scheugenpflug dosing system K06399 is a stand-alone dosing machine. The unit is specifically configured to dispense DOWSIL 744 from a 20 kg Hobbock. It features the following axes: X, Y, Z, needle pivotable 45°, carrier rotatable with a lift/rotate unit. A needle cleaning and measuring station is included. The Bosch conveyor belt for the carriers has a fixed width of 400 mm (non-adjustable). Please note: originally, the unit was equipped with inlet and outlet buffers—these components are no longer present, the pictures only illustrate them for reference. Inlet and outlet buffers are no longer included—they are shown for understanding only. Itodpfx Aeua Acqsh Nsb / years, not used in the last 2 years due to change of product line.

Year of construction: 1991, operating hours: 13 h, condition: like new (used), functionality: fully functional, Corazza/IMA MD120 portion packer. Iedswfn Adepfx Ah Njtb Machine for dosing and wrapping mini portions of butter and bouillon cubes in rectangular packs. - Capacity 5400 p/hr up to 7200 p/hr - Current pack size 31x23x11 --> Conversion to other pack size possible - Yom. 1991. - Factory overhaul by IMA 2016. Only 13 running hours since the overhaul. - Paper feed and positioning controlled by photocell - Butter fed by stainless steel funnel with stainless steel auger. - Fully guarded with Lexan doors and windows. (Acc EC regulations.) - Including documentation and EC conformity declaration. - A fully automatic collecting and stacking device in multiple layer configuration can be added. - This machine is basically the similar to the Benhil 8304 As new condition Please contact us for more information, the machine can be seen by appointment.