Used Dmg Ecomill 50 for sale (397)

Condition: good (used), Year of construction: 2017, 4 axes Travel: X = 730 mm, Y = 730 mm, Z = 880 mm Tool holder: HSK-A63 Pallet changer / shuttle table Number of tool stations: 40 Hjdpfxsyn Drxe Agfsff

Condition: excellent (used), CNC lathe DMG CLX 450 V3, year 2018, Siemens, in very good condition. Hfedpex Hqh Ssfx Agfjf

Condition: used, Year of construction: 2011, functionality: fully functional, DMG Gildemeister CTX 500 Alpha V6 - Year of manufacture: 2011 - Control: Siemens 840D shop turn - Counter spindle - With Y-axis and C-axis - Turret: 12-position motorized VDI 30 Additional equipment: - Hydraulic chuck Hfsdpfsylkuuex Agfef - Chip conveyor - Coolant system - Interface for bar feeder - Workpiece catcher with conveyor belt

Condition: like new (used), Year of construction: 2013, operating hours: 5,931 h, functionality: fully functional, For sale: Very well-maintained CNC turning-milling center DMG Mori Seiki NLX 2500MC/700, year of manufacture 2013, equipped with a Mitsubishi 730 BM control system. Only about 6,000 operating hours! Technical data: CNC control: MSX-853 MAPPS IV Travel ranges X-axis travel (mm): 260 Z-axis travel (mm): 795 Max. turning diameter (mm): ø366 Max. turning length (mm): 705 Bar capacity diameter (mm): 80 Swing diameter over bed (mm): 787 (interference with front cover: 586) Swing diameter over cross-slide (mm): 541 Rapid traverse X, Z (m/min): 30 Main spindle Max. speed (rpm): 4,500 Hfjdpfjyq N E Aex Agfjf Drive power (kW): 18.5 / 15 Tailstock Tailstock travel (mm): 734 Quill taper: MT5 Turret Number of tool stations: 12 Driven tool speed (rpm): 6,000 Driven tool motor power (kW): 5.5 Turret indexing time (s): 0.27 Rated power (kVA): 32 Footprint / Weight Machine length (mm): 2,053 Machine width (mm): 3,970 Machine height (mm): 1,900 Weight (kg): 6,000

Condition: used, Year of construction: 2015, operating hours: 37,735 h, functionality: fully functional, machine/vehicle number: 14595607194, travel distance X-axis: 1,450 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, feed length X-axis: 42 mm, feed length Y-axis: 42 mm, feed length Z-axis: 42 mm, feed rate X-axis: 42,000 m/min, feed rate Y-axis: 42,000 m/min, feed rate Z-axis: 42,000 m/min, nominal power (apparent): 33 kVA, torque: 130 Nm, controller manufacturer: Siemens, controller model: 840D, total height: 2,910 mm, total length: 4,383 mm, total width: 3,395 mm, table load: 2,000 kg, rotary table diameter: 9,900 mm, rotational speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, NO DEALER ENQUIRIES – Dealer enquiries will not be answered! We are offering a DMG MORI DMC 1450 V (vertical machining centre) from our inventory for sale. Condition Fully functional, in ongoing production Demonstration/inspection under power possible Details Operating hours: 37,735 h Machine No.: 14595607194 (nameplate: 4595607194) Factory ID: 3044578 Spindle: up to 10,000 rpm Power supply: 400 V (±10%), 50 Hz, 33 kVA, max. 48 A, fuse protection 50 A Total weight: approx. 9,900 kg Year of manufacture: according to nameplate 2015 (delivery/installation possibly 2017 – refer to documentation) Disassembly/Collection Disassembly/loading and collection by arrangement If you have any questions, require further technical details (control system, tool magazine, ICS, etc.), or would like to arrange a viewing, please send a message. _____ Inventory List – DMG MORI DMC 1450 V Basic Machine Manufacturer: DMG MORI Machine type: Vertical machining centre Model: DMC 1450 V Technical Basic Data X-axis: 1450 mm Y-axis: 700 mm Z-axis: 550 mm Rapid traverse: 36 m/min Spindle speed range: 20 – 14,000 rpm Spindle: Inline spindle Power: 14.5 kW / 11.5 kW (40/100% duty cycle) Tool holder: SK40 DIN 69871 Tool clamping: DIN 69872 Tool changer: 20 positions (drum magazine) Table size: 1700 x 750 mm Measuring system: indirect X / Y / Z Control Control: Siemens SINUMERIK 840D solutionline User interface: Sinumerik Operate Control panel: ERGOline control Monitor: 19 inch Options / Equipment Tool magazine extension Chain magazine SK40 Capacity: 60 tool positions including double gripper and mechanical setup aid Touch probe Heidenhain TS 649 DMG Infrared measurement system Direct measuring system for X / Y / Z axes including air purge Coolant/air blow-off switching External via M function Air blow through spindle centre Selectable via M function Filtered air with low oil content Internal coolant supply – Basic Package 3 Rotary union spindle Internal coolant supply Paper band filter 40 bar / 600 l Chip conveyor Bed flushing Enclosure roof Rinsing gun For chip rinsing Oil and emulsion mist separator Mechanical (only with enclosure roof option) Operating mode 4 Process monitoring in production Documentation Hsdpfx Agoypi Dcsfjff Machine documentation in German User interface Screen text German/English DMG Netservice Client Remote service Installation on external PC

Condition: excellent (used), Year of construction: 2012, operating hours: 3,355 h, functionality: fully functional, turning length: 450 mm, turning diameter: 200 mm, spindle speed (max.): 5,000 rpm, spindle bore: 51 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 450 mm, overall weight: 3,800 kg, For sale is a CNC lathe from the brand Gildemeister, model CTX 310 Eco. The machine is in excellent condition and ready for immediate use. Technical specifications: Year of manufacture: 2012 Operating hours: 3,355 h (see picture) Hodpfexf T N Tox Agfeff Control: SIEMENS SINUMERIK 810D Powerline Max. turning diameter: 200 mm Max. swing diameter over bed: 330 mm Max. turning length: 450 mm X-axis travel: 160 mm Main spindle speed: 5,000 rpm Spindle bore: 51 mm Turret: 12-station turret (VDI 30) Live tooling: 6 driven tool stations Live tool speed: approx. 4,500 rpm Rapid traverse X/Z: 30/30 m/min Dimensions: approx. 4200 mm x 1700 mm x 2300 mm Machine weight: approx. 3,800 kg Chip conveyor included in the offer. Tool holders not included in the offer (can be offered additionally). Transport and loading can be organized across Europe upon request, at extra cost. Prices are exclusive of VAT. Inspection by appointment possible. Contact us — our team is happy to assist you! Trade-in or exchange possible! Machinery trading PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For more information or contact options, please visit our website.

Condition: like new (used), Year of construction: 2018, operating hours: 23,501 h, functionality: fully functional, turning diameter over cross slide: 740 mm, turning diameter: 920 mm, spindle motor power: 18 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, milling spindle length: 91 mm, rotational speed (max.): 10,000 rpm, total height: 2,395 mm, total length: 5,330 mm, total width: 4,100 mm, swing diameter over cross slide: 740 mm, spindle nose: JIS A2-8, overall weight: 8,360 kg, CNC controller: Mitsubishi M730UM (CELOS - ERGOline Touch) Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross-slide mm: 740 Bar work capacity mm: 80 Tool magazine Magazine places: 20 Tool holder: BMT40 Upper turret Number of tool slots St .: 20 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5.5/4.9/4.2 (3 min/5 min/cont) Y-axis travel mm: 100 Rapid Feed Rate: 30 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18.5/18.5/15 (25%ED/50%ED/cont) Spindle bore mm: 91 Chuck type: Hollow chuck (Ø254 mm) BB210A821 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Maximun torque Nm: 49 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11/7.5 (25%ED/cont) Spindle bore mm: 73 Chuck type: Hollow chuck (Ø210 mm) BB208A621 Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximun torque Nm: 22 Hjdpewkf H Defx Agfsff Counter spindle travel mm: 734 Coolant system Tank capacity liter: 366 Equipment Electronic Handwheel Chip conveyor Signal lamp High pressure pump Mist collector Workarea light Chuck foot switch (double) for main and counter spindle Coolant gun Measuring probe Paper band filter Preparación para trabajar con robot Robot data - Fanuc - R-30iA / Type M-16iB/20 Availability of 10 pallets in the warehouse (10 slots) Clamping by robot: ø40 to 220mm x Hight 20mm Max. Weight by robot piece: 5,6kg Working time hours Under power: 23.501 Potencial nominal kVA: 48 Cutting Time: 7.494 Basic machine dimensions / weight Length mm: 5.330 Width mm: 4.100 Height mm: 2.395 Weight kg: 8.360

Condition: excellent (used), Year of construction: 2003, turning diameter over cross slide: 390 mm, turning length: 2,250 mm, turning diameter: 610 mm, spindle bore: 118 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 1,870 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 240 mm, Equipment: rotational speed infinitely variable, Siemens Sinumerik 840D control. CNC turning and milling center with main and counter spindle for efficient 4-axis complete machining of chuck, bar, or shaft parts. Hedpfsw Ngmhox Agfjff

Condition: like new (used), Year of construction: 2023, functionality: fully functional, DMG CMX 50 Year of manufacture: 2023 Spindle hours: approx. 1,300 h Spindle: 15,000 rpm inlineMASTER Tool holder: SK40 Tool stations: 30 slots Control: Siemens 840D sl X travel: 500 mm Hfsdjyg Nqkjpfx Agfof Y travel: 450 mm Z travel: 400 mm Weight: 4,700 kg

Condition: like new (used), Year of construction: 2015, operating hours: 3,886 h, functionality: fully functional, turning length: 685 mm, turning diameter over cross slide: 650 mm, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 267 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, chuck outer diameter: 250 mm, swing diameter over cross slide: 650 mm, spindle nose: A2-8, overall weight: 5,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, This DMG MORI CLX 450 V3 is standard equipped with: Hsdpfx Ajyguqisgfeff - PROGRESSLine (display of remaining production time and piece count for a complete machining process). - Interface for barfeeder. - Chip conveyor. - High-pressure pump (12 bar). - New 3-jaw chuck (SMW AUTOBLOK type BB-D Ø250) incl. sets of jaws. - Workpiece catcher/dispenser. - Original DMG mist extraction system. - Foot pedal for clamping/unclamping main spindle. - Rinsing gun (5 bar). - Original DMG documentation.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Travels X = 1,450 mm, Y = 700 mm, Z = 550 mm Rapid traverse 42 m/min Spindle speed range 20 to 14,000 rpm Hfodpsylpf Sefx Agfof Inline spindle with power 20.3 kW / 14.5 kW (40/100% load) Tool taper SK40 DIN69871 Tool shank according to DIN69872 Tool changer with 20-position SK40 magazine (disc with tool holder in bushing and double gripper) Table clamping area 1,760 x 750 mm Direct position measuring in X, Y, Z axes Machine is connected, can be tested.

Condition: excellent (used), Year of construction: 2017, DMG MORI DMC 1150 V Vertical Machining Center CNC: Siemens CELOS SMARTkey operating mode selector Year: 2017 Continuously programmable spindle speed: 20–24,000 rpm Spindle motor power: 24 kW Spindle hours: 2,200 hrs Continuously programmable feed rate for X, Y, Z axes up to 42,000 mm/min Rapid traverse X, Y, Z: 42 m/min X-axis travel: 1,150 mm Y-axis travel: 700 mm Z-axis travel: 550 mm Table size: 1,460 × 750 mm Maximum table load: 1,500 kg Overall dimensions: 6,185 × 5,421 × 2,910 mm Transport dimensions: 3,733 × 2,855 × 2,710 mm Hjdoyf Im Iepfx Agfjff Machine weight: 9,200 kg Accessories: - 60-position tool magazine - Chip conveyor - Blum tool probe - Heidenhain workpiece probe - 4th-axis rotary table Nikken BZA CNC Z180 - Mist separator - Chiller unit - Through-spindle coolant - Set of 63 HSK tool holders - Wash gun - Oil mist extractor - Complete documentation

Condition: used, Year of construction: 2016, BAZ DMC850V, year 2016 CNC milling machine DMG Mori 30-position tool changer DMC850V 3-axis Control type: Sinumerik 840 D Required space: 4x4x2.8 m Hsdpfx Agow E Emgjfjff Table size: 1150 mm x 600 mm Year of manufacture: 2016 Travel paths: X=850 mm, Y=520 mm, Z=475 mm CE certified Operating hours: 16,637 h Spindle hours: 10,477 h CNC

Year of construction: 2011, condition: ready for operation (used), An automated pallet handling system DMG Mori for machining centers is available. Pallet positions: 7, max. workpiece weight: 250kg, max. workpiece diameter: 500mm, max. workpiece height: 400mm, pallet change time: under 40s. Documentation available. An on site inspection is possible. Hfjdpfx Agsydd Acofof

Condition: used, Year of construction: 2001, turning diameter 390 mm centre distance 1850 mm swing diameter 610 mm control SINUMERIK 840D turning speeds 20-4000 U/min spindle bore 79 mm bar capacity 65 mm weight of the machine ca. 18000 kg total power requirement 33 kW Control System Siemens Sinumerik 840D Bed Design: 4-rail bed Guideways: Roller guides Working Area Maximum swing diameter: 610 mm Standard turning diameter: 390 mm Distance between spindles: 1850 mm Traverse travel cross/longitudinal – Slide 1: 605 / 1470 mm Y-axis – Slide 1: 210 mm B-axis – Slide 1: 240° Traverse travel cross/longitudinal – Slide 2: 227 / 1440 mm Longitudinal travel – Slide 3: 1460 mm Turning and Milling Spindle – Slide 1 Number of tools: 80 Tool holder: HSK-A63 Max. spindle speed: 12,000 rpm Max. drive power 40/100% duty cycle: 10 / 15 kW Indexing unit: 1.0° Clamping torque (locking): 500 Nm Spindle 1 – Left Max. bar capacity: 65 mm Spindle nose faceplate: 220 h5 Spindle bore: 79 mm Internal draw tube: 68 mm Front bearing diameter: 140 mm Spindle 2 – Right Max. bar capacity: 65 mm Hedpfx Agex Tu Susfjff Spindle nose faceplate: 220 h5 Spindle bore: 79 mm Internal draw tube: 68 mm Front bearing diameter: 140 mm Main Drive 1 and 2 – Left / Right Max. drive power 40/100% duty cycle: 25 / 33 kW Speed range: 20 – 4000 rpm Rated speed: 700 rpm Max. torque 40/100% duty cycle: 840 / 460 Nm Drive type / design: AC / 1 Design: Integrated spindle motor C-axis speed (rapid traverse): 100 rpm C-axis torque (holding torque): 350 Nm C-axis indexing accuracy: 0.025° Slide 1 Rapid traverse speed X/Ys/Z: 46 / 24 / 60 m/min Feed force X/Ys/Z: 11 / 16 / 11 kN Position resolution X/Y/Z: 0.001 mm Ball screw X (d × p): Ø40 × 15 mm Ball screw Ys (d × p): Ø40 × 10 mm Ball screw Z (d × p): Ø50 × 25 mm Slide 2 Rapid traverse speed X/Z: 24 / 60 m/min Feed force X/Z: 7.5 / 11 kN Position resolution X/Z: 0.001 mm Ball screw X (d × p): Ø32 × 15 mm Ball screw Z (d × p): Ø50 × 25 mm Slide 3 Rapid traverse speed Z: 60 m/min Feed force Z: 12 kN Position resolution Z: 0.001 mm Ball screw Z (d × p): Ø50 × 25 mm Tool Changer – Turret Head Gripper type: Double gripper Control type: Cam-controlled Tool change time G1/G2: 1.3 / 2.6 s Tool Spindle Speed 4000 rpm Coolant Unit 180 liters

Condition: excellent (used), Year of construction: 2017, operating hours: 6,473 h, functionality: fully functional, machine/vehicle number: 12780000173, DMG MORI NHX 5000 About the Machine: High-precision and reliable machine. Available immediately. Technical Data: - Control: Siemens 840D - Travel X-, Y-, Z-Axis: 730/730/880 mm - C-Axis Travel: 360° - Rotary Table Clamping Surface: 500x500 mm - Spindle Speed: 20-15,000 rpm - Tool Interface: SK40 - Tool Magazine with 60 positions - Pallet changer with 2 stations - Automation-ready Equipment: - Internal cooling, 70 bar with belt filter system - Work area rinsing - BLUM measuring probe - Rinse gun - Chip conveyor - Signal light - Handheld control device Inspection / test under power on site can be arranged by appointment. We are happy to offer you transport, installation, and commissioning at your location. Everything from a single source: We at Baumgärtner CNC GmbH specialize in: - Service - Maintenance - Overhauling - Automation Hfjdpfx Aeyhwpwsgfjf for DMG machines and other renowned manufacturers. We accompany you—from the machine purchase, through transport and installation, all the way to commissioning and ongoing maintenance or repair work. You can rely on us.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: NTX26200912, turning length: 1,530 mm, turning diameter: 670 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 675 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 40 mm, rotational speed (max.): 4,000 rpm, number of slots in tool magazine: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with the shortest length of 350 mm Machining option: 6-sided complete machining thanks to powerful counter spindle TECHNICAL DETAILS X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining area: Ø 670 mm x 1,530 mm Control Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Chuck for counter spindle: KITAGAWA 10" hollow chuck BB210A821 Protection: Double foot switch with protective cover for main and counter spindle Travel control: Automatic travel control of the clamping cylinder for the main spindle and counter spindle Turning-milling spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool holder: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for tool holders attached with screws Milling performance: 6,000 rpm, 40 Nm (turret 2, FANUC) Tool magazine Capacity: 76 tools Tool holder: CAPTO C6 Measuring and monitoring Tool presetting: Manual tool presetting device for main and counter spindle, removable (standard) Distance measuring system: Direct distance measuring system in the X, Y and Z axes of the turning-milling spindle Sensor system: Spindle sensor measuring system with radio signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feed device (LNS, IRCO, IEMCA, Edge Technologies, multiple) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Cooling media and chip disposal Chip conveyor: Ejection on the right, hinged belt + Drum filter Coolant: Use of water-soluble cooling lubricants (emulsion) Pressure: High-pressure coolant system with 70 bar Coolant supply: Through the spindle for the tool spindle and lower turret Filter system: Knoll/Interlit Compressed air system Blow-off system: For chucks on the main and counter spindle Oil mist system Oil mist separator: Extraction opening Ø 200 mm, AFS 1600 Filter and cooling system Hedpfx Agsyap Shefeff Filter system: INTERLIT TMF300/980 compact filter system, 70 bar Additional pressure: 15 bar for turret II with lifting pump (FANUC/MITSUBISHI) Cooler: INTERLIT auxiliary cooler, 15 kW

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,214 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller model: SINUMERIK 840 D sl/operate, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel X-axis: 730 mm Travel Y-axis: 730 mm Travel Z-axis: 880 mm Max. main spindle speed: 20,000 rpm Max. torque: 250/104 Nm Tool holder: HSK-A63 Distance spindle center to table: 80 - 810 mm Distance spindle nose to table center: 70 - 950 mm Number of pallets: 2 Pallet size: 500 mm x 500 mm Max. workpiece weight: 500 kg Pallet change time: 9.0 s Max. workpiece diameter: 800 mm Max. workpiece height: 1,000 mm Number of tool stations: 40 Tool change time (tool to tool): 2.5 s Tool change time (chip to chip): 4.4 - 10.0 s Max. tool diameter: 70 mm Max. tool length: 550 mm Max. tool weight: 12 kg Rapid traverse speed: 60,000 mm/min MACHINE DETAILS Control: SINUMERIK 840 D sl/operate High-pressure coolant: 70 bar Dimensions & Weight Hjdpfxeyapvao Agfeff Floor space required: 6,000 mm x 4,000 mm x 2,700 mm Machine weight: 12.0 t Operating hours: 5,214 h EQUIPMENT Pallet changer Coolant tank Tool breakage monitoring

Condition: excellent (used), Year of construction: 2018, Tool holder VDI 30 Hsdpjx Nnbhsfx Agfeff Tool turret with 12 stations Main spindle speed: 5,000 rpm Drive power: 16.5 kW Including bar feeder Including documentation

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 15 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 366 [mm] - C axis indexing precision : 0.001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260/590 [mm] - Y stroke : +/-50 [mm] - Tool type : BMT - Live tools speed : 10000 [rpm] - Live tools power : 5.5 [kW] TAILSTOCK - Tailstock type : Numérique - Type of cone : CM4 - Tailstock stroke : 564 [mm] - Distance between centers : 510 [mm] POWER SUPPLY - Supply voltage : 400 [V] MACHINE HOURS - Number of hours under power : 7327 [h] - Number of working hours : 2200 [h] EQUIPMENT - CNC : CELOS Hfjdsx Tvkfepfx Agfof - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : MAPPS V - 3 colors status lamp - Coolant tank - Chips conveyor - Tool probe - Parts catcher - Predisposition for barfeeder - Number of turning tool holders : 2 - Number of fixed tool holders : 10 - Collet chuck

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 705 mm, turning diameter: 356 mm, spindle bore: 81 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 795 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,220 mm, total length: 3,100 mm, total width: 1,920 mm, overall weight: 6,200 kg, bar passage: 80 mm, tailstock quill stroke: 734 mm, Equipment: documentation/manual, Mori Seiki NL2500Y/700 CNC Lathe – with Y-Axis – Used & Fully Refurbished, Immediately Ready for Operation The machine is in excellent condition, completely overhauled by qualified technicians and fully functional. Ideal for precision machining with Y-axis and live tooling. Main Specifications: - Year of manufacture: 2005 - CNC control: Mori Seiki MSX-850 - Max. swing diameter: 755 mm - Max. turning diameter: 356 mm - Max. turning length: 705 mm - Bar capacity: 80 mm - Spindle bore: 81 mm Spindle and Turret: - Kitagawa BB210 3-jaw chuck (clamping range 41–254 mm) - Spindle speed: up to 4,000 rpm - 12-position turret - Powered tools up to 6,000 rpm Hsdpfxsvw Acks Agfjff - Included: 4 driven toolholders and 7 static toolholders Axes: - X-axis travel: 260 mm - Y-axis travel: ±50 mm - Z-axis travel: 795 mm - Rapid traverse X/Z: 30 m/min Additional Features: - Tailstock (734 mm travel, MT3 fitting) - Belt-type chip conveyor - Tool presetting system - Parts catcher ("manina") Dimensions and Weight: - Footprint: 3,100 x 1,920 x H 2,220 mm - Weight: 6,200 kg Machine supplied with: - 2x radial driven toolholders - 1x axial driven toolholder - 8x static toolholders (boring bar and standard toolholders) The machine is available for testing and demonstrations at our showroom or via video call and is immediately ready for use.

Condition: ready for operation (used), DMG Suppl. 110498 Flat control panel TFT 15" . 2386389 SN:504822207, used, normal signs of use, 100% functional, scope of delivery as per photos Hfedpfxoi I Iz As Agfsf

Condition: good (used), Description: The machine is in good technical condition and can be tested by prior arrangement. Control system – Siemens, including filtration. Bed inclination, bed material, number of guideways: 45°, cast iron, 3 (4 with Y-axis option). WORKING AREA (V1–V4): - Swing over bed: 19.69" - Swing over cross slide: 11.42" - Maximum turning diameter: 7.87" - Distance between centers: 30.71" - Maximum turning length: 19.69" / 15.82" / 20" - Max. unsupported workpiece weight: 35 lb - Max. overhang from spindle face (unsupported): 165" Hodpfxsx Apkze Agfoff - Max. workpiece weight between centers: 100 lb - X-axis travel: 7.48" - Y-axis travel (option): 3.14" (+/- 1.57") - Z1-axis travel: (specify) - Z3-axis travel: (specify) - Spindle center height above floor: 20.67" / 21.65" / 39.26" (38.77" + 1.18") MAIN SPINDLE: - Spindle nose (flat type): FL 140h5 - Chuck diameter: 6.69" (optionally 8.26") - Bar capacity: 2.01" - Spindle bore: 2.87" - Guide bush diameter: 2.05" - Inner diameter of front bearing: 3.94" - Spindle bearing lubrication: grease - Max. power (100/40% duty cycle): 20.82 / 36.20 kW - Speed range (100% duty cycle): 6000 rpm - Speed range (40% duty cycle): 6000 rpm - Rated speed: 1500 rpm - Max. torque (100/40% duty cycle): 93.72 / 125.46 ft*lb - Voltage type, number of ranges: AC/1 - Motor type: ISM52

Condition: excellent (used), Year of construction: 2020, operating hours: 4,800 h, functionality: fully functional, machine/vehicle number: NL154200702, Manufacturing origin: JP Voltage: 380 V / 50 Hz / 3-phase Net weight: 5,400 kg Customs tariff number: 8458.9100 TECHNICAL DATA Maximum turning diameter: 350 mm Turning length: 515 mm CNC control: M730UM MAPPS Celos Swing over bed: 923.8 mm Hsdpow T Sn Eofx Agfjff Swing diameter above carriage: 755 mm Standard turning diameter: 260 mm Bar capacity: 34 mm Main spindle: Spindle speed range: 100 – 8,000 rpm Spindle motor power: 11 / 7.5 kW C-axis resolution: 0.001° Chuck diameter: 210 mm Subspindle: Maximum speed: 8,000 rpm Spindle nose: A2-5 Axis travels: X-axis travel: 260 mm Z-axis travel: 580 mm Y-axis travel: 100 mm (±50 mm) Turret: Number of turret stations: 20 Driven stations: 20 Tool shank diameter: 25 mm Maximum driven tool speed: 10,000 rpm Driven tool motor power: 5.5 / 3.7 kW Feed rates: Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse subspindle: 30 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse C-axis: 400 rpm Total power requirement: 31 kVA Approximate machine weight: 5.4 t Approximate machine dimensions: 4.0 x 3.0 x 3.2 m Errors and omissions excepted – data provided without obligation.

Condition: excellent (used), Year of construction: 2018, Traverses XYZ 1150 x 700 x 550mm, table size 1460 x 750mm, table load 1,500kgs, spindle speed 12,000 rpm, Hfodpew Nq Hxofx Agfof 20 station ATC, Siemens 840D control, swarf conveyor, and coolant.