Used Dmg Dmu 50 T for sale (415)

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840 Dsl Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2013 Control system:Siemens 840 Dsl Turning length:1,185 Swing diameter:540 mm Bar capacity:75 Main spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush Sub spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush + flush through spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on traveling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:Capto C6 X-axis:450 mm Y-axis:200 mm Z-axis:1,200 mm B-axis:+/- 110° Gijdpfx Aexl Nfqsgbjl Position sensors:Direct scales (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Automation: Technology:Portal loader with stacking magazine Workpiece diameter:50 - 200 mm Max. workpiece height:230 mm Max. workpiece weight:15 kg Number of stacking attachments:20 Max. load capacity per stacking attachment:40 kg Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 80 bar Tool magazine:Chain magazine, 120 stations Workpiece measurement:Renishaw touch probe Tool breakage monitoring:Swivel wire Automation:Portal loader with stacking magazine Emulsion mist separator:Mechanical Setup operation:Electronic handwheel Workspace door:Automatic Chuck:2x SMW KNCS 260 Tool holders:Various Capto C6 holders

Condition: good (used), Year of construction: 2014, x-travel 730 mm y-travel 730 mm z-travel 880 mm size of pallet 2 x: 500 x 500 mm spindle speed: 12000 tool taper SK 40 distance spindle center to table 80 - 810 mm milling spindle drive 30 kW max. torque max. 102 Nm max. workpiece weight 500 kg max. workpiece diameter on pallets 800 mm max. workpiece height H = 1100 mm Giodpfx Agov Htitsbsl change time of pallets 9,5 sec Max. speed ot the feeder 60000 mm/min rapid traverse 60 m/min tool changer number of tools 40 max. tool diameter 110 mm max. tool-dia with free toolbox 320 mm max. tool weight 30 kg change-time chip to chip 4,4 - 10 sec change-time tool to tool 1,95 sec Number of working hours 15894 h total power requirement 46 KVA weight of the machine ca. 15 t required space 5,5 x 3 x 2,8 m Well-preserved horizontal machining center DMG-Mori, Mod. NHX 5000, built in 2014 with Siemens 840D CNC control with two pallets and 40-way tool changer. Read operating hours 23262, spindle hours 15894 Other data: Distance spindle nose - table center 70 - 950 mm Pallet indexing time 1.3 sec Indexing of the B axis (table) 360 x 1 degree Jog feed rate 0 - 5000 mm/min Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 0031000270A,

Condition: used, Year of construction: 2021, Machine Description for 2021 Model: Horizontal Machining Center NHX 5000 Manufacturer: DMG MORI Bielefeld Hilden GmbH Type / Model: NHX 5000, Fanuc 31iB with CELOS ERGOline Touch Year of Manufacture: 2021 Control System: FANUC 31iB with CELOS / 21.5" Multi-Touchscreen / MAPPS system Technical Data: • Working Area / Travels: - Travel X / Y / Z: 730 / 730 / 880 mm - Pallet size: 500 × 500 mm - Pallet quantity: 2 (with threaded holes) - Minimum B-axis indexing angle: 0.001° (DD direct drive) - Max. rotary table speed: 100 rpm - Pallet load: 500 kg - Hydraulic coupling with 2 hydraulic and 2 air circuits (max. 7 MPa) - Automatic indexing setup station • Performance / Spindle Speed / Drive Power: - Spindle: speedMASTER® motor spindle - Speed range: 35 – 20,000 rpm - Power: 37 / 26 / 18.5 kW (15% / 30 min / continuous duty) - Torque: 221 / 107 / 86.8 Nm - Tool taper: SK40 (7/24 taper, face contact) - Tool magazine capacity: 60 tools (ring-type, random selection) - Max. tool diameter: 70 mm (adjacent) / 170 mm (free) - Max. tool length: 550 mm - Max. tool weight: 12 kg - Chip conveyor: rear discharge with drum filter - Through-spindle coolant interface (8-step pressure control, up to 7 MPa) - Coolant / air switching via spindle - External coolant system: INTERLIT TMF300/600 compact filter unit (70 bar / 32 L/min) • Weight / Dimensions / Electrical Connection: - Machine weight: approx. 12,000 kg - Coolant tank capacity: 800 L - Transformer: 54 kVA Gsdpjxnkdmofx Agbjil - Power supply: 400 V, 50 Hz Equipment / Accessories: - Renishaw OMP60 spindle probe system (optical transmission) - Tool breakage detection system in the magazine - Hydraulic coupling on both pallets with integrated pressure regulation (7 MPa) - Automatic door for setup station - Rotating inspection window (air-driven) - Oil mist extraction system: LTA AC3002 (1,050 m³/h, dual electrostatic stages) - INTERLIT TMF300/600 high-pressure coolant filter system (70 bar, 32 L/min) - EtherNet/IP robot interface - IoTconnector, NETservice, Machine Data Connector (MDC), DMG MORI Messenger - CELOS with touchscreen and MAPPS functionality - Four-color signal light tower - Handheld control device (mobile handwheel) - Central coolant preparation for through-spindle supply - Drain circuit for auto-coupler (to prevent pressure drop) - 10 programmable external M-codes - 2 hydraulic clamping towers (each with 6 hydraulic 2-jaw chucks, GHHY-2B-200.00/K) - Voltage: 400 V, 50 Hz configuration - Air filter unit (T105A-1000MSP) This summary uses industry-standard terminology and structure suitable for platforms such as Machineseeker or TruckScout24.

Year of construction: 2012, operating hours: 6,500 h, condition: ready for operation (used), Main Drive Number of axis 3 Media Chip conveyor Yes Gsdpfx Agsx D D Uwobsil Additional Equipment KITAGAWA Hollow Clamping Device with KITAGAWA SS1881K21 for the main spindle 15 bar pump with filter Coolant system with increased pressure (5 bar) Hinged belt conveyor, right-hand discharge Integrated parts catcher for the main spindle Interface for bar feed, LNS Double foot switch with protective cover Signal light (red, yellow, green) Tool overhang length 100 mm for driven Y-axis travel + Tool holder package Transformer 45000 VA This 3-axis DMG Mori Seiki NLX2500Y 700 was manufactured in 2012. It features a KITAGAWA Hollow Clamping Device, enhanced coolant system at 5 bar, and an integrated parts catcher. Additional attributes include a hinged belt conveyor, I/F for bar feed, and a signal light system. Ideal for turn-mill operations, consider the opportunity to buy this DMG Mori Seiki NLX2500Y 700 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 15 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 366 [mm] - C axis indexing precision : 0.001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 Giedpfxox Tvkfe Agbel - X/Z stroke : 260/590 [mm] - Y stroke : +/-50 [mm] - Tool type : BMT - Live tools speed : 10000 [rpm] - Live tools power : 5.5 [kW] TAILSTOCK - Tailstock type : Numérique - Type of cone : CM4 - Tailstock stroke : 564 [mm] - Distance between centers : 510 [mm] POWER SUPPLY - Supply voltage : 400 [V] MACHINE HOURS - Number of hours under power : 7327 [h] - Number of working hours : 2200 [h] EQUIPMENT - CNC : CELOS - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : MAPPS V - 3 colors status lamp - Coolant tank - Chips conveyor - Tool probe - Parts catcher - Predisposition for barfeeder - Number of turning tool holders : 2 - Number of fixed tool holders : 10 - Collet chuck

Condition: used, Year of construction: 2024, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2024 Control : Siemens 840 Dsl - Operate Turning diam. : 400 mm Turning length : 1100 mm Main spindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):17 kW Torque (max.):345 Nm Clamping cylinder:Hollow clamping cylinder Bar capacity:67 mm Workpiececlampig:3-Jawchuck, Schunk Rota THW 315-104 Sub spindle: Technology:Motorspindle Speed:5,000 rpm Power (max.):17 kW Torque (max.):345 Nm Clamping cylinder:Partially hollow clamping cylinder Workpiececlamping:3-Jawchuck, SMW Autoblok 250 BB Movement in Z:1.200 mm Thrustforce (Tailstockfunction):2,5-6 kN Tool carrier (X/Y/Z/B): Technology:Travelling column with millingspindle Speed:12.000 rpm Power (max.):10,5 kW Torque (max.):90 Nm Taper:HSK-A63 Swivelrange in B:+/- 120° In general: Toolmagazine:Chainmagazine, 60 Stations Movement in X/Y/Z:750/200/1.100 mm Rapid travers in X/Y/Z:40 m/min Equipment: Positionsensor:Direct scales in X/Y Chip disposal:Chip conveyor Coolant supply:Internal coolant with Paperbeltfilter and Highpressure, 20 bar Workpiecemeasurement:Renishaw RMP 40 Toolbreakagecontrol:Blum Z-Nano Toolmonitoring:Easy Tool Monitor Automation:Automationpackage (Automatic Door, electrical Interface Robo2Go) Gsdpfx Agsx Ih Rtsboil Emulsion mist separator:Meachanical extraction, AFS 1100 :Set-up operation. Electronic handwheel Technology cycle:Alternating speed Digital Manufacturing:IoT Connector Further Equipment:Spindlechiller, Rinsing pistol

Condition: like new (used), Year of construction: 2023, operating hours: 3,751 h, functionality: fully functional, turning length: 700 mm, turning diameter: 356 mm, spindle speed (min.): 6,000 rpm, spindle bore: 81 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 795 mm, DMG MORI NLX2500/700 universal lathe with Y-axis, bar loader and driven tools. Main and counter spindle. Spindle bore diameter: 81 mm. An optional tooling package worth €60,000, which was purchased together with the machine, is available. Godjx Sp Izopfx Agbsil

Condition: like new (used), Year of construction: 2019, operating hours: 43,841,500 h, functionality: fully functional, machine/vehicle number: 0030000534A, turning diameter over cross slide: 350 mm, turning diameter: 250 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, rotational speed (max.): 5,500 rpm, bar passage: 65 mm, chuck outer diameter: 225 mm, Equipment: documentation/manual, CNC Lathe DMG Mori CLX350 V4 Year: 2019, Control: DMG Mori Slimline / Siemens Shopturn Spindle hours: approx. 1500h, Power-on hours: approx. 4500 Including Y-axis and driven tools VDI30 and C-axis Automatic tool measurement on the machine using Tooleye Wedge bar chuck: SMW Autoblock 3-jaw chuck KNCS 225/66 with various jaws Collet chuck: SMW Autoblock Spindle bore: 65mm, Spindle speed: 5000 rpm spindle, 5500 rpm driven tools Double coolant filter Prepared for bar feeder Godpfjx Tpwfex Agbsil High-pressure coolant pump, 12 bar coolant pressure 6 driven tools, 3x vertical / 3x horizontal 12-position tool turret, all driven. Tool holder VDI30 Various tool holders with different tools

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: NL251EG1087, turning length: 705 mm, turning diameter: 356 mm, spindle bore: 81 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 795 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,220 mm, total length: 3,100 mm, total width: 1,920 mm, overall weight: 6,200 kg, bar passage: 80 mm, tailstock quill stroke: 734 mm, Equipment: documentation/manual, Mori Seiki NL2500Y/700 CNC Lathe – with Y-Axis – Used & Fully Refurbished, Immediately Ready for Operation The machine is in excellent condition, completely overhauled by qualified technicians and fully functional. Ideal for precision machining with Y-axis and live tooling. Main Specifications: - Year of manufacture: 2005 - CNC control: Mori Seiki MSX-850 - Max. swing diameter: 755 mm - Max. turning diameter: 356 mm - Max. turning length: 705 mm - Bar capacity: 80 mm - Spindle bore: 81 mm Spindle and Turret: - Kitagawa BB210 3-jaw chuck (clamping range 41–254 mm) - Spindle speed: up to 4,000 rpm - 12-position turret - Powered tools up to 6,000 rpm - Included: 4 driven toolholders and 7 static toolholders Axes: - X-axis travel: 260 mm - Y-axis travel: ±50 mm - Z-axis travel: 795 mm - Rapid traverse X/Z: 30 m/min Additional Features: - Tailstock (734 mm travel, MT3 fitting) - Belt-type chip conveyor - Tool presetting system - Parts catcher ("manina") Giodpfxevw Ackj Agbjl Dimensions and Weight: - Footprint: 3,100 x 1,920 x H 2,220 mm - Weight: 6,200 kg Machine supplied with: - 2x radial driven toolholders - 1x axial driven toolholder - 8x static toolholders (boring bar and standard toolholders) The machine is available for testing and demonstrations at our showroom or via video call and is immediately ready for use.

Condition: excellent (used), Year of construction: 2006, Universal 5 axis Machine Center Giodpjx Nmllefx Agbel DMG DMF 250 Linear Year Mfg 2006 Heidenhain iTNC530 control Travel X2,500 Y920 Z820mm NC Rotary Chuck _ Hoffmann (A axis) NC B axis -105 ~ 105 degree (Spindle Head) NC C axis 360 degree ATC 30 magazine Spindle 18,000rpm Spindle Taper BT40 Direct Measuring X,Y & Z axis

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, turning length: 500 mm, turning diameter over cross slide: 290 mm, turning diameter: 240 mm, spindle speed (max.): 5,500 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 23 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, torque: 192 Nm, workpiece weight (max.): 30 kg, total height: 1,829 mm, total length: 4,066 mm, total width: 2,583 mm, collet bore: 73 mm, bar diameter (max.): 73 mm, swing diameter over cross slide: 290 mm, spindle nose: FL 140h5, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, This DMG MORI CTX alpha 500 V5 from 2015 is in very neat condition and has 7,040 spindle hours on the clock. In 2020, the machine was fitted with a BMO automation, type Iridium Ir 25F, but has seen little production since then. PLEASE NOTE! The 2 panels with laser/motion sensor are not shown in the photo but are, of course, included. This CTX alpha 500 is equipped with: Gedpfx Aox Rqwhogbeil - BMO Iridium Ir25F automation (2020). - LNS Quick Load Servo III bar feeder (2016). - Schunk Rota THW plus powered chuck with quick-change jaw system. - Various top jaws. - DMG CELOS software. - Chip conveyor. - Workpiece catcher/ejector. - Tool measurement arm. - Foot pedal for chuck clamping/unclamping. - Miscellaneous tooling (driven & static). - Original DMG documentation.

Condition: like new (used), Year of construction: 2011, operating hours: 9,080 h, functionality: fully functional, For sale: Well-maintained CNC turning and milling center DMG Mori Seiki NLX 2500 SY/700, year of manufacture 2011, equipped with Mitsubishi 730 BM control! Only approx. 9,000 operating hours! Travel axes X-axis: 260 mm Y-axis: 100 mm Z-axis: 795 mm Equipment and accessories: - Tool turret: 12 stations, all powered - Driven tool speed: Max. 10,000 rpm - Parts catcher - Electrical connection: 400 V - Power consumption: 37.6 KVA - Internal cooling: available - Main spindle chuck: Kitagawa BB210AB - Sub-spindle chuck: Kitagawa B206A521F - Swing diameter: 366 mm - Turning length: 705 mm - Spindle bore: 80 mm - Main spindle max. speed: 4,000 rpm, with 3-jaw chuck - Main spindle power: 18.5 kW - Sub-spindle max. speed: 6,000 rpm, with 3-jaw chuck - Chip conveyor - Tool measurement system in the working area - Manually deployable measuring arm for sub-spindle - Short bar loader, manufacturer: LNS - Includes tools: 8 fixed tools, 3 driven tools - Includes extraction system, brand: Indusa - Includes complete documentation Machine available immediately! Gedexzqhrspfx Agbjil Machine has been fully cleaned and inspected! We will undertake loading of the machine! Transport can be organized upon request!

Condition: good (used), Description: The machine is in good technical condition and can be tested by prior arrangement. Control system – Siemens, including filtration. Bed inclination, bed material, number of guideways: 45°, cast iron, 3 (4 with Y-axis option). WORKING AREA (V1–V4): - Swing over bed: 19.69" - Swing over cross slide: 11.42" - Maximum turning diameter: 7.87" - Distance between centers: 30.71" - Maximum turning length: 19.69" / 15.82" / 20" - Max. unsupported workpiece weight: 35 lb - Max. overhang from spindle face (unsupported): 165" - Max. workpiece weight between centers: 100 lb - X-axis travel: 7.48" - Y-axis travel (option): 3.14" (+/- 1.57") - Z1-axis travel: (specify) - Z3-axis travel: (specify) - Spindle center height above floor: 20.67" / 21.65" / 39.26" (38.77" + 1.18") MAIN SPINDLE: - Spindle nose (flat type): FL 140h5 - Chuck diameter: 6.69" (optionally 8.26") - Bar capacity: 2.01" - Spindle bore: 2.87" - Guide bush diameter: 2.05" - Inner diameter of front bearing: 3.94" - Spindle bearing lubrication: grease - Max. power (100/40% duty cycle): 20.82 / 36.20 kW - Speed range (100% duty cycle): 6000 rpm - Speed range (40% duty cycle): 6000 rpm - Rated speed: 1500 rpm - Max. torque (100/40% duty cycle): 93.72 / 125.46 ft*lb - Voltage type, number of ranges: AC/1 - Motor type: ISM52 Gisdpfx Agex Apkzobel

Condition: used, Year of construction: 2017, DMG Mori NLX2000SY/500 CNC Turning Centre. Serial No. NL203171121 (2017) with Siemens Ergoline Celos Type 9CE000_APDB Control, 20 Station Turret, Kitagawa BR08 Large Bore Main Spindle 3-Jaw Chuck & Kitagawa B208 Sub-Spindle 3-Jaw Chuck, Main & Sub-Spindle Toolsetters, Parts Catcher, Parts Conveyor, Hydrafeed Multifeed MX1B Bar Feed, Cleanmist CM1400/2, Swarf Conveyor, Selection of Driven & Static Tool Holders with Capto Turning/Boring Tools, Manuals, Setting Bar, Country of Origin: Japan Please Note: This machine has been decommissioned and transit brackets fitted. Giedpfxox R Tcte Agbol Location: This lot is located in Birmingham, UK. A charge of £550 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2023, CNC Milling and Turning Center Machine type: DMG Mori CLX 450 TC Control: Siemens 840 D sl Operate Slimline Year of manufacture: 2023 Giodex Ryw Ropfx Agbjl TECHNICAL DATA: Max. turning length: 1,100 mm Turning diameter: 400 mm Main spindle: ISM 65 Speed range: 5,000 rpm Drive power: 14 / 17 kW Torque: 275 / 345 Nm Spindle nose: A2-8 Bar capacity: 67 mm C-axis CNC spindle swiveling for milling and turning operations Max. speed: 12,000 rpm Drive power: 8.8 / 10.5 kW Torque: 73 / 90 Nm Tool holder: HSK 63 Tool positions: 60 Counter spindle: ISM 65 Spindle nose: A2-8 Max. speed: 5,000 rpm Drive power: 14 / 17 kW Torque: 275 / 345 Nm C-axis X-axis: 750 mm Y-axis: +/- 100 mm Z-axis: 1,100 mm B-axis: +/- 120 mm Features: Chip conveyor Direct position measuring system Chip flushing gun 3-jaw chuck: SMW-Autoblok BBD 250/78 mm 3-jaw chuck: SMW BBD 250/78 mm Tailstock function on counter spindle High-pressure pumps: 8 bar / 20 bar Coolant tank: 600 l Oil mist extraction Probe: Renishaw RMP 40

Condition: used, Year of construction: 2004, Technical details: Gsdpfxow Dud So Agbeil x-travel: 600 mm y-travel: 700 mm z-travel: 60 mm tool taper: SK40 magazine place: 30 Stück table surface area: 630 mm 5axis-CNC-Milling Machine Make: DMG Type: DMU 60 P YOM: 2004 *

Condition: excellent (used), Year of construction: 2018, Tool holder VDI 30 Gijdpox Nnbhefx Agbjl Tool turret with 12 stations Main spindle speed: 5,000 rpm Drive power: 16.5 kW Including bar feeder Including documentation

Condition: good (used), Year of construction: 2019, operating hours: 8,173 h, functionality: fully functional, turning length: 12,025 mm, turning diameter: 480 mm, spindle speed (max.): 3,250 rpm, travel distance X-axis: 308 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, bar passage: 102 mm, overall weight: 7,200 kg, controller model: DMG MORI SLIMline Multi-Touch Control, control type: CNC control, CLX 550 V6 2-axis universal lathe with driven tools incl. C-axis, Y-axis, and counter spindle Standard equipment: 1. Ergonomic DMG MORI SLIMline operating panel 2. Main spindle A2-8 with AC motor, drive power 22 / 33 kW (100/40% DC), 3,250 rpm 3. Counter spindle A2-6 with ISM 52 synchro, drive power 13 / 14 kW, torque 171.5/192 Nm (100/40% DC), 5,000 rpm 4. 12-position servo turret, VDI 40 mounting with Trifix® precision interface and 12 driven tool stations per DIN 5480 5. Y-axis ± 60 mm 6. Chip tray 7. Hollow clamping device, max. bar capacity D 80 mm 8. Electronic handwheel Drive power (100%/40% DC) 22/33 kW Hydraulic clamping device with bar capacity diameter 102 mm, surcharge Differential pressure clamping for main spindle Bar package & interface option includes: - Workpiece unloader for parts up to D 80 x 200 mm long (D 100 x 200 mm with option C-B7000G) Max. workpiece weight 4 kg - Interface for bar loader or bar feed unit (DMG MORI standard interface) - Hinged belt chip conveyor instead of chip tray - 4-color signal tower Recommended additional option: Double cartridge filter for coolant, especially for production environments with very high chip volumes. Giodpfx Agexx Tcmebol Automatic workpiece ejector for counter spindle with internal coolant supply for clamping device flushing. Note: Option recommended for machines with workpiece unloader option. External flushing for counter spindle, option recommended for machines with automation Differential pressure clamping for counter spindle Tailstock function for counter spindle, mechatronic force control programmable in the software (force 250-600 daN), including foot switch (only for CLX 550 V6) Direct measuring system for X- and Y-axis (option only available for V4 and V6 versions) Manual tool measuring device in the working area, brand Marposs Documentation according to 'Technical Documentation Delivery List' – included in the machine price. Software option: DXF import for converting DXF files into NC programs (SIEMENS control) Tool monitoring system: Easy Tool Monitor 1.0, monitors each cutting operation against a set limit. Simple learning function for determining the monitoring limit per tool and cutting operation; manual adjustment/correction possible. Technology cycle: Alternating speed (turning) for vibration-sensitive applications Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and professional installation – everything from a single source. Billing based on individual terms and duration. Contact us for your personal offer.

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: Heidenhain, controller model: TNC7, table load: 5,000 kg, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, Used 5-axis machining center from DMG with TNC7 control Retrofit 2025 DMG Deckel Maho DMU 200 P Year of manufacture: 1999/2025 Condition: Good and fully functional Control: Heidenhain TNC7 X travel: 1800 mm Y travel: 2000 mm Z travel: 1100 mm Technical data: - Rotary table D1400 x 1700 mm - Table load capacity 6000 kg - B-axis - 60-position tool changer - SK 50 - 10,000 rpm - ICS (internal coolant supply) - 980-liter coolant tank - Chip conveyor - Rinsing gun - Infrared probe Optional: - Kineopt - VCS-Complete - High-frequency spindle 30,000 rpm Retrofit updates: - New TNC7 control - INA guideway in Y axis Giodjxtwkwjpfx Agbsl - Motor spindle Transport and commissioning can be offered separately. Sale subject to prior sale. No guarantee is given for the technical information provided here. Statutory provisions apply.

Condition: good (used), Year of construction: 2009, operating hours: 9,400 h, CNC lathe with C-axis, driven tools + Y-axis + handling DMG - Gildemeister CTX Alpha 500 Siemens 840D sl ShopTurn control Rotation diameter over bed: 500 mm Rotation diameter over support: 290 mm Turning diameter for shafts: 200 mm Turning length: max. 500 mm Travel distances: X 190 mm Y +/- 40 mm Z 525 mm Rapid traverse: X,Z 30,000 mm/min. Y 22,500 mm/min. Spindle nose: 150h5 Spindle bearing diameter: 100 mm Bar capacity: 51 mm Spindle drive power: 20/27 kW Spindle speed: max. 6,000 rpm Spindle torque: max. 170 Nm C-axis: C-axis 0.001° Chuck diameter: 210 mm Tool turret positions: 12 Driven tool positions: 12 Tool holder: VDI 30 Tool drive power: 5.4 kW Tool speeds: 5,000 rpm Tool torque: max. 18 Nm Automatic tailstock travel: 550 mm Automation/handling system for portal parts: Huber - 3-axis Machine weight: max. 4,650 kg Accessories: C-axis and driven tools. Godpfsrx R N Ijx Agbjil Y-axis for off-center milling/drilling operations. 12-position tool turret. Automatic tailstock. Chip conveyor. Tool package. Automation - HUBER 3-axis gantry parts handling system. With parts magazine. Good condition. 9400 program runtime hours. Offer number L-4860

Condition: ready for operation (used), Year of construction: 2022, operating hours: 113 h, functionality: fully functional, machine/vehicle number: AL150210302, turning length: 336 mm, turning diameter: 440 mm, spindle bore: 61 mm, spindle speed (max.): 6,000 rpm, controller model: DMG MORI COMPACT LINE, No minimum price – guaranteed sale to the highest bidder! Only 113 operating hours! The payment deadline for the machine is 04/12/2025! Placing a bid obligates you to collect the machine on time, between 12/10/2025 and 12/12/2025! The machine can be inspected on 11/25/2025! TECHNICAL DETAILS Turning length: 336 mm Gjdpfx Agox Itdxjbsil Turning diameter: 440 mm Bar capacity (max.): 52 mm Swing over bed: 620 mm Swing over cross slide: 465 mm Spindle speed (max.): 6,000 rpm Number of spindle speed ranges: 1 step Spindle bore diameter: 61 mm Spindle bearing inner diameter: 100 mm Shank diameter for square tools: 20 mm Shank diameter for boring bars: 32 mm X-axis travel: 260 mm Z-axis travel: 375 mm Rapid traverse in X-axis: 30,000 mm/min Rapid traverse in Z-axis: 30,000 mm/min Number of tool magazine positions: 12 MACHINE DETAILS Control model: DMG MORI COMPACT LINE Frequency: 50 Hz Operating hours: 113 h EQUIPMENT • Coolant system • Chip conveyor

Condition: ready for operation (used), DMG Suppl. 110498 Flat control panel TFT 15" . 2386389 SN:504822207, used, normal signs of use, 100% functional, scope of delivery as per photos Giedpfx Agji I Iz Aobsl

Condition: excellent (used), CNC lathe DMG CLX 450 V3, year 2018, Siemens, in very good condition. Giedpfx Agex Hqh Ssbsl

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements width 2700 mm Measurements depth 5700 mm Measurements height 2100 mm Machine weight 7950 kg Control Unit Brand SIEMENS Model SINUMERIK 840D solution line with ERGOline control and ShopTurn, operating system Windows Main Drive Spindle speed range 5000 Spindle bore 87 mm Number of axis 5 Movement X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 30 m/min Z-Axis Rapid Traverse 30 m/min Tail Stock Pinol tool taper MT 5 Tools Godsx D S S Dspfx Agbeil Max weight 7 kg Max tool diameter 80 This 5-axis DMG CTX Beta 1250 TC turn-mill centre was manufactured in 2010. It features a swing diameter of 500 mm, max turning diameter of 390 mm, and a turning length of 1250 mm. The spindle supports up to 5000 RPM and 34 kW power, complemented by a 24-position tool magazine. Ideal for complex machining tasks, consider the opportunity to buy this DMG CTX Beta 1250 TC turn-mill centre. Contact us for more information about this machine. Application Types Turning