Used Dmg Dmu 50 T for sale (396)

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included Gedpjxgnz Tsfx Acwjir On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: ready for operation (used), Year of construction: 2010, operating hours: 7,186 h, controller manufacturer: HEIDENHAIN, controller model: ITNC530, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DMG MORI DMU 60 MonoBlock was manufactured in 2010. It features a 60-tool automatic tool changer, a maximum spindle speed of 12,000 RPM, and SK40 tool holder. Additional features include a Heidenhain TS649 probe, 3D quickSET, and 40 bar through-spindle coolant. Ideal for complex and precise machining tasks. Located in Iceland, contact us for more information about this machine. Gsdsx D Iiropfx Acweir • Through-spindle coolant: 40 bar • Spray gun • Electronic handwheel • BA4 mode Additional equipment • Heidenhain TS649 touch probe • 3D quickSET (calibration/checking system) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2001, operating hours: 20,325 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: TNC430, total height: 3,200 mm, table width: 1,250 mm, table length: 1,000 mm, table load: 2,000 kg, overall weight: 18,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 120, product length (max.): 6,000 mm, number of axes: 5, This 5-axis DMG DMU 125 P hi-dyn was manufactured in 2001. It features a Heidenhain control system, a SK50 spindle taper, and 120 tool stations. With spindle hours totaling 22,180, consider the opportunity to buy this DMG DMU 125 P hi-dyn universal machining centre. Contact us for more information about this machine. • Spindle hours: 22,180 • Tool magazine/stations: 120 • Travel distances: 1250 x 880 x 800 • Tool holder: SK50 • Changer: 120 tool positions in chain magazine • Gripper type: Double gripper • Control: Heidenhain TNC 430 • Working range: Longitudinal: 1250 mm Transverse: 880 mm Vertical: 800 mm • Dimensions: approx. 6 x 8 x approx. 3.20 m height • Weight: approx. 18,000 kgB axis is indexedAdditional data: • Full protection cabin • IKZ through spindle center • Blow air through spindle center retrofitted • Chip conveyor • Coolant tank 600 liters • NC rotary table D1250 x 1000 mm • Max. load at table center 2,000 kg • Clamping grid 9 slots 18H7 a 100 mm • Kit motor with SK50 gearbox – spindle speed 8,000 rpm • Renishaw MP10 SK50 infrared measuring probe Gedpfx Acox Sz Dhowoir • Electronic handwheel • 4 operating modes possible • Flushing gun with pump Technical Specification Taper Size SK 50 Through-spindle Coolant Yes Dimensions Machine Depth 8000 mm

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details. • Feed rates: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high-pressure 40 bar • Documentation: instruction manuals and CE declaration Additional equipment • Coolant tank with paper filter, 600 L Gsdpfjymcvmsx Acwoir • Measuring probe • Chip conveyor • Electronic handwheel (remote) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,339 h, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMU 60 monoBlock was manufactured in 2005. It features a chip conveyor and a coolant system, ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 60 monoBlock machine we have for sale. Contact us for more information. • Heidenhain TNC530 • 24 tool positions • SK-40 chuck • Spindle speed: 18,000 • measuring probe Technical Specification Through-spindle Coolant Yes Gsdjx D Nwkspfx Acwoir

Condition: excellent (used), Year of construction: 2002, Control Siemens Sinumerik 840D Travel paths X/Y/Z: 560 x 560 x 510 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Gsdpfx Acsyrir Sjwoir Tool magazine for 40 tools, SK 40 Paper filter Chip conveyor

Condition: used, Year of construction: 2002, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,600 mm, spindle speed (min.): 10,000 rpm, Universal machining center Machine type: DMG DMC 340 U Control: Heidenhain iTNC 530 Year of manufacture: 2002 TECHNICAL DATA: Travel paths: X-axis: 2,800 mm Godpjx Uxc Tjfx Acwjir Y-axis: 3,400 mm Z-axis: 1,600 mm B-axis C-axis Rapid traverse: (X/Y/Z): 60 / 30 / 40 m/min. Swivel head Speed range: 10,000 rpm. Drive power: 44/32 kW Torque: 288 Nm Tool holder: HSK 100 Tool positions: 120 Tool diameter: 130 / 250 mm Tool length: 650 mm Tool weight: 30 kg NC rotary table: 2500 x 2000 Pallet system Number of pallets: 2 Pallet size: 2,500 x 2,000 mm Top table: D. 2,800 Features: Internal cooling (IKZ): bar Coolant tank: l Chip conveyor Electronic handwheel Chip flushing gun

Condition: good (used), Year of construction: 2015, Table size 950 x 800mm , table load 1,000 kgs, Traverses X Y Z 1,000 x 900 x 700mm, B axis -5/+110 degrees, C axis 360 degrees Rapid feedrates 80m/min, 60 station toolchanger, spindle taper HSK 63, Godpeyqxduofx Acwsir spindle speed 18,000rpm, Heidenhain TNC 530 control, swarf conveyor, Through Spindle Coolant

Condition: good (used), Year of construction: 2011, Ref. -No.: 10615 Gedpfx Aceym Nfhowsir Manufacturer: DMG Type: DMU 210 P Year of construction: 2011 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 128/XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Swivel range: -30 / +180 ° Table Load: 10000 kg Max. rotary table diameter: 1700 O Table speed range: 12 min/-1 Tool Taper: SK 50 Numbers Of Tools In Magazin: 60 Weight Of The Machine Ca.: 41 t Motor spindle: 24000 RPM Feed drive A, C: 30 min/-1 horizontal milling head: 130-1.380 mm vertical milling head: 230-1.480 mm Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2009, Ref. -No.: 10616 Manufacturer: DMG Type: DMU 210 P Year of construction: 2009 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 257XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Gisdpfx Acex R R Hcswsr Z-Travel: 1250 mm B-Axis: -30 / +180 ° C-Axis: 360 ° Table Load: 8000 kg Clamping Area: 1.700 mm Tool Taper: SK 50 Spindle Speed: 10.000 RPM Max. Torque: 288 Nm Total Power Requirement: 38 kW No. Of Working Stations: 60 Internal cooling: 40 bar Holding torque: 22.700 Nm Further information: - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. The machine can be viewed under power.

Condition: excellent (used), Year of construction: 2016, 5-Axis Universal Machining Center DMG Mori ecoMill 50 Control: Heidenhain TNC 620 Year of manufacture: 2016 Travels: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: °-5/+110 Gjdpfxsyk T Ino Acwoir C-axis: °360 Clamping surface rotary axis: Ø 630 x 500 mm Spindle interface: SK 40 Tool magazine: 32 slots Speed: 12,000 rpm Internal coolant – 12 bar high-pressure pump Accessories: Chip conveyor 3D infrared measuring probe Table probe

Condition: ready for operation (used), Year of construction: 2011, Make: DMG Gisdpfx Acexg Tdyjwsr Type of machine: DMC 60 T Year of manufacture: 2011 Control system: Heidenhain iTNC 530 Machine's weight: ca. 9 t Tool holder: SK 40 x-travel: 780 mm y-travel: 560 mm z-travel: 560 mm Speed range: 12.000 1/min Number of tools in the magazine: 120 Pl. Internal coolant supply: 40 bar. 3D Measuring probe: Heidenhain TS641 : 360 ° : x

Year of construction: 1995, condition: excellent (used), Travel X/Y/Z: 350 x 240 x 340 mm Spindle speed 6300 rpm Tool holder SK 40 Manual swivel rotary table tool holder vice Accesories Godpfxelawavo Acweir

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, rotational speed (max.): 12,000 rpm, overall weight: 7,500 kg, For sale: CNC 5-Axis Machining Centre, manufacturer DMG, model DMU 60 P The machine is fully operational and ready for immediate use. In 2021, a new spindle was installed, and all required maintenance has been carried out. History: 2019: New ball screw (KGT) 2021: New spindle 2022: Single-shift operation 2023: Occasional job orders 2024: Taken out of operation but remained connected to power 12/2025: Dismantled, cleaned, and stored Technical Specifications: X travel: 600 mm y travel: 650 mm z travel: 550 mm Control unit: Heidenhain TNC 426 Spindle speed: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Gisdpjwbhq Hofx Acwjr Number of tool pockets: 60 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 - 10,000 mm/min Total connected load: 44 kVA Space requirements: approx. 7.0 x 6.0 x 2.7 m Machine weight: approx. 7.5 t Please note: Vices or clamping fixtures are not included in this offer. Upon request, we can organise transport and loading, at an additional cost. Europe-wide service available. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing needs? Or are you looking to sell yours? For more information or contact options, please visit our website.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10626 Manufacturer: DMG Type: DMU 210 P Year of construction: 2008 Type of control: CNC Control: Heidenhain ITCN 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Gedpfx Aceyiyg Isweir B-Axis: -30 / +180 ° C-Axis: 360 ° Table Load: 8000 kg Clamping Area: 1.700 mm Tool Taper: HSK - 100 Spindle Speed: 10.000 RPM Max. Torque: 288 Nm No. Of Working Stations: 60 coolant reservoir: 40 bar L. Further information: - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. - Direct position measuring systems in all axes - Heidenhain TS workpiece measurement - Electronic handwheel setup mode - Chip conveyor chip disposal - Double gripper tool changer - Motor spindle technology The machine can be viewed under power by arrangement.

Condition: not inspected (used), Year of construction: 1989, We are offering, as part of an insolvency liquidation: 2 x CNC lathes (1 x sub-spindle, 1 x lower turret), used + Bar feeder + Accessories 1. CNC Lathe with Sub-Spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - Bar feeder HYDROBAR Giodpfx Ajx Ed A Djcwsr - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC Lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T Bar feeder HYDROBAR - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 collets - Approx. 40 sets of jaws - Various tool holders + tools - Documentation The machines are untested, but were in operation until the end. The machines have been dismantled and the price includes loading.

Condition: like new (used), Year of construction: 2015, operating hours: 26,915 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 30 kVA, controller manufacturer: M-730UM, workpiece weight (max.): 1,000 kg, total height: 2,800 mm, total length: 3,300 mm, total width: 3,000 mm, table width: 600 mm, table length: 1,100 mm, spindle speed (min.): 8,000 rpm, Year of construction: 2015 CNC controller: M-730UM Axes X-axis travel mm: 800 Y-axis travel mm: 530 Z-axis travel mm: 510 Distance spindle nose - table surface mm: 150-660 Feed rates m/min: 5 Rapid traverse m/min: 30 Worktable Number of pallets: 1 Table dimensions mm: 1100x600 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 30/22 (25%ED/cont) Spindle torque Nm: 304 Tool system Tool holder: MAS-BT 50 Tool magazine slots: 30 With free neighboring places mm: 240 With occupied neighboring places mm: 120 Max. Tool Length mm: 350 Max tool weight kg: 20 Tool-to-tool time s: 2.34 Equipment Chip conveyor Gedpfoxwxc Aex Acwsir Internal cooling lubricant supply 4th axis DDRT-260X Custom Macro common variables (200) Machine running times Under power: 35896 Spindle Working: 26915 Rated power kVA: 52 Basic machine dimensions / weight Length mm: 3300 Width mm: 3000 Height mm: 2800 Weight kg: 6870

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, torque: 121 Nm, controller manufacturer: Siemens, table width: 700 mm, table length: 900 mm, table load: 1,400 kg, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 32,000 h, coolant supply: 40 bar, spindle nose: HSK63A, number of slots in tool magazine: 30, tool length: 350 mm, tool diameter: 100 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMU 80P duoBlock Year of manufacture: 2006 Operating hours: 62,000 h Spindle hours: 31,000 h Function tested and cleaned Maintenance performed according to manufacturer's specifications Geometry within new machine tolerance Equipment: 5 axes Swivel head (controlled B-axis) Direct linear measurement in X/Y/Z (glass scales) Chip conveyor Extraction system NC rotary table Tool magazine with 30 positions Gijdow Ht Ibspfx Acwsr Heidenhain touch probe BLUM laser Handwheel Rotating viewing window ICS 40 bar (internal coolant supply) Chip flushing Operating mode 4

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11160000593, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 18,000 rpm, table diameter: 630 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Number of simultaneous axes: 5 Table diameter: 630 mm Number of T-slots: 9 Distance between T-slots: 63 mm T-slot width: 14H7 mm Centering bore diameter: 50H6 mm Max. spindle speed: 18,000 rpm Feed rate longitudinal: from 20 mm/min to 15,000 mm/min Feed rate transverse: from 20 mm/min to 15,000 mm/min Feed rate vertical: from 20 mm/min to 15,000 mm/min Rapid traverse: 40 m/min Max. workpiece height: 1,000 mm Max. workpiece diameter: 920 mm Max. workpiece weight on table: 500 kg Table indexing (B-axis): 360° Swivel angle (A-axis): +45/-30° Holding torque A-axis: 3,866 Nm Clamping torque C-axis: 6,008 Nm Max. torque: 2,650 Nm Gijdpoyhnxvjfx Acwsr Number of tools: 180 Tool diameter: 80 mm Diameter with adjacent tool pockets empty: 160 mm Max. tool length: 350 mm Max. tool weight: 10 kg Tool holder: SK 40 DIN 69871 MACHINE DETAILS Measuring system resolution: µm Compressed air connection: 5 - 8 bar Power supply: 50 Hz 3x 400 Volt Total power requirement: 44 kVA Noise level: 80 dB(A) Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 2,628 mm Machine weight approx.: 7,500 kg EQUIPMENT Set of tool holders SK 40 approx. 150 pcs High-pressure coolant system 40 bar Coolant through the spindle (CTS) Renishaw tool probe Lighting Rotating viewing window Electrical cabinet air conditioning unit

Condition: used, Year of construction: 2017, x-travel 500 mm y-travel 450 mm Gjdpfewm Rthex Acwsir z-travel 400 mm Control DMG MORI

Condition: defective spare-parts repository (used), Year of construction: 2000, 5-axis machining center DMG Type:DMU125 P Year 2000 Control Heidenhain TNC430 Machine with HV milling head and NC swivel rotary table. Spindle holder ISO 50 Spindle speeds up to : 8000 rpm Travel X 1250 mm Y 880 mm Z 800 mm A-axis and B-axis Tool magazine pos.120 . Gijdpjuwnzvjfx Acwor Machine documentation available Machine is not ready for use without chip conveyor .

Year of construction: 2008, condition: ready for operation (used), A DMG CNC universal machining center is available. Travel X/Y/Z: 780mm/560mm/560mm, spindle speed: 12000/min, tool places: 60, tool holder: SK40, table: rotary table, milling head: swiveling, pallet capacity: 5, pallet dimensions X/Y: 630mm/500mm, control: Heidenhain MillPlus IT, operating hours: 42603h, spindle hours: 20137h. Including rotary pallet changer, BLUM laser, TS 641 3D measuring probe, chip conveyor, 40bar IKZ, 900l coolant tank and Rotoclear. Documentation available. On-site inspection is possible. Giodpfev Exrkjx Acwer

Condition: ready for operation (used), Year of construction: 2012, Axes: 5, travel X/Y/Z: 400mm/400mm/375mm, spindle speed: 18000rpm, power: 35kW, tool holder: HSK-A63, tool positions: 60, rapid traverse: 30m/min, table dimensions X/Y: 480mm/480mm, max. workpiece weight: 250kg, machine weight: approx. 8150kg, operating hours: approx. 50950h, spindle hours: approx. 20200h. The lifting and swivel unit of the pallet changer are defective. Documentation available. An on-site inspection is possible. Giodpfjwwvw Hjx Acwor

Year of construction: 2003, condition: ready for operation (used), Travel X/Y/Z: 600mm/700mm/800mm, resolution: 0.001mm, input resolution: 0.001mm, positioning tolerance: 0.01mm, feed rate: 15m/min, rapid traverse: 40m/min, speed: 18000rpm, power: 31kW, control: Heidenhain MillPlus. Documentation available. On-site inspection is possible. Gijdpjx U Dwijfx Acwjr

Year of construction: 2004, condition: ready for operation (used), A DMG CNC universal machining center is available. Travel X/Y/Z: 780mm/560mm/560mm, spindle speed: 12000/min, tool places: 60, tool holder: SK40, table: rotary table, milling head: swiveling, pallet capacity: 5, pallet dimensions X/Y: 630mm/500mm, control: Heidenhain iTNC 530, operating hours: 62659h, spindle hours: 38299h. Including rotary pallet changer, BLUM laser, TS 641 3D measuring probe, chip conveyor, 40bar IKZ, 900l coolant tank and Rotoclear. Documentation available. On-site inspection is possible. Giedov Exrdspfx Acwor