Used Dmg Ctx Alpha 300 for sale (380)

Condition: good (used), Year of construction: 2000, operating hours: 48,804 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 7,000 mm, total width: 5,000 mm, table width: 400 mm, table length: 500 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 23,574 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained 4-axis machining center from precision manufacturing. The machine has been serviced regularly, is immediately ready for operation, and comes with a pallet changer and extensive accessories. Ideally suited for tool and mold making or series production. Technical Specifications -Travel distances: X 600 mm / Y 560 mm / Z 560 mm -B-axis: 360° x 0.001° (60 rpm) -Spindle speed: 0 – 8000 rpm (stepless) -Control: Siemens Sinumerik 840D -Table size: 6 pallets, each 500 x 400 mm -Table load: 350 kg -Working feed: 1 – 60,000 mm/min -Rapid traverse: 60 m/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 90 positions -Max. tool diameter: 80 mm Gedpfx Asx Icyvjf Tjuh -Max. tool length: 350 mm -Max. tool weight: 10 kg -Max. total magazine weight: 450 kg -Tool change time: 5 sec -Pallet change time: 6 sec Machine Requirements & Dimensions -Motor power: 13 kW / 20 kW -Torque: 124 / 191 Nm -Total power requirement: 20 kW -Machine weight: approx. 16,000 kg -Required floor space (LxW): 7 x 5 m Equipment & Accessories -Coolant system approx. 1100 L (internal & external) -Knoll cooling unit with drum filter (30/40/50 bar via M-command) -Chip conveyor -Tool measurement: Renishaw probe -Tool breakage detection in the machining area -Pallet storage (4 positions) -Pallet sequence operation -Enclosed work area in accordance with UVV -Network capability -Technical documentation & installation layout available Components Renewed -Hydraulic system motor & pump replaced -Some hydraulic and pneumatic hoses replaced -Control cabinet LT module exchanged -Drum of Knoll system replaced Operating Hours / Run Times - Power-on hours approx. 48,804 h (counter runs when the machine is switched on, including during setup, maintenance, or idle times) - Spindle run time total 23,574 h Special Features - Machine live, immediately ready for use - Inspection possible any time by appointment - No dealer sale – machine comes directly from production - Technically inspected, no known defects - Assistance with disassembly, loading, and transport possible (for an additional charge) All information has been provided to the best of our knowledge and belief. Subject to alterations, errors, and prior sale.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 640, total height: 2,700 mm, overall weight: 9,600 kg, spindle speed (max.): 20,000 rpm, product length (max.): 3,000 mm, number of axes: 5, This 5-axis DMG MORI DMU 60 EVO was manufactured in 2017. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm, and a 120-fold tool changer. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40bar. It's well-suited for high-precision machining tasks. Consider the opportunity to buy this DMG MORI DMU 60 EVO vertical machining centre. Contact us for more information about this machine. • NC swivel rotary table • Tool changer: Yes, chain magazine 120 positions (120-fold) • Coolant: internal/external; internal coolant supply 40 bar / 6001; extended chip flushing; flushing gun; blast air through spindle center • Rotating viewing window • Electronic handwheel • Screen display: German/English • Space requirement: 25 sqm • Condition: Very good, in operation Gjdjy D Hvaepfx Af Touh Additional equipment • Chip conveyor • Oil and emulsion mist separator • Infrared PP 60 optical measuring probe • Tool breakage control TRS2 • Signal light, 4-color • Extended interface M65 for Erowa Job Management System • Preparation for EROWA handling system (Operating mode 4) • Accessories: 120x SK40 tool holders Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2002, operating hours: 13,028 h, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, total height: 2,450 mm, table width: 2,400 mm, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, product length (max.): 3,000 mm, number of axes: 3, This 3-axis DMG DECKEL MAHO 64V Linear was manufactured in 2002. It features an X-axis travel of 640 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine includes a table clamping surface of 850 × 600 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 64V Linear vertical machining centre we have for sale. Contact us for further details. • Rapid Traverse (X / Y / Z): 30 m/min • Max. Feed Rate: 20000 mm/min • Table Clamping Surface: 850 × 600 mm • Max. Table Load: 600 kg • Automatic Tool Changer (ATC) Magazine Capacity: 30 stations • Max. Tool Diameter: 80 mm (140 mm with adjacent pockets empty) • Max. Tool Length: 300 mm • Max. Tool Weight: 7 kg • Spindle Speed Range: 20 – 8000 rpm • Tool Taper: SK 40 / ISO 40 • Spindle Power (100% / 40% ED): 13 kW / 19 kW • Max. Spindle Torque: 140 Nm Technical Specification Taper Size SK 40 Gsdsy S Azhopfx Af Touh

Condition: excellent (used), Year of construction: 2018, operating hours: 5,500 h, functionality: fully functional, Control SIEMENS 840D SL Shopturn Swing diameter over bed 580 mm Swing diameter over slides 320 mm Max. turning diameter 320 mm X travel 242 mm Y travel +/- 40 mm Z travel 540 mm Distance between centers 780 mm Rapid traverse X/Z 30/36 m/min Rapid traverse Y 22.5 m/min Spindle speed 5000 rpm Spindle nose A2-6 Spindle bore D73 mm Through hole 51 mm Drive power 16.5/11 kW Turntable 12-station (with internal coolant supply) Spindle taper VDI30 C-axis programmable Tailstock sleeve Morse 4 Tailstock travel 550 mm Hydraulic action Gujdpfx Asyr I A Ajf Tsh Power consumption 28 kVA Weight approx. 4400 g kg Dimensions (with chip conveyor) 2800 (3680) x 1780 x 1850 mm Accessories, Equipment - D210 mm SMW hydraulic chuck with 65 mm bore (spindle locked) - Chip conveyor (conveyor belt) - Coolant system - C+Y axes - Integrated tool measuring arm - Tailstock - Manuals

Condition: excellent (used), Year of construction: 2012, Technical specifications: 5-axis machine: X, Y, Z, C, B Travel distances (X/Y/Z): 500 / 450 / 400 mm Travel range B axis: +110/-5° Travel range C axis: 360° Godjyzzpvopfx Af Touh CNC control: SIEMENS 840D Table width: 500 mm Table diameter: 630 mm Table angle adjustable in degrees Max. workpiece weight: 200 kg Number of tool changer positions: 30 Spindle speed: 20 – 10,000 rpm Motor power: 13 kW Dimensions (L x W x H): approx. 3400 x 2550 x 2200 mm Machine weight: approx. 4.8 t Additional equipment: Workpiece measuring probe Chip conveyor Condition: Very good condition, little used, approximately 12,850 operating hours

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 220 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 280 mm, table load: 10 kg, overall weight: 1,800 kg, spindle speed (max.): 40,000 rpm, number of axes: 5, This 5-axis DMG Ultrasonic 10 was manufactured in 2010. It features a maximum spindle speed of 40,000 rpm and a travel of 220 x 200 x 280 mm. The machine is equipped with a Siemens 840D solutionline control and has a maximum table load of 10 kg. If you are looking to get high-quality machining capabilities, consider the DMG Ultrasonic 10 vertical machining centre we have for sale. Contact us for further details. • Working hours: 19,000 h • T-slots: 60 • Spindle interface: HSK-A32 • Power: 25 kVA Guodpfx Aey H Ea Nef Teh

Condition: ready for operation (used), Year of construction: 2009, operating hours: 16,616 h, travel distance X-axis: 120 mm, spindle speed (max.): 36,000 rpm, number of axes: 5, This 5-axis DMG Sauer Ultrasonic 10 + PH 2 | 120 was manufactured in 2009. It features a main drive speed of 40,000 rpm and an output performance of 6 kW. The machine operates efficiently with a cooling system and has a protection type of IP 54. If you are looking to get high-quality ultrasonic machining capabilities, consider the DMG Sauer Ultrasonic 10 + PH 2 | 120 vertical machining centre we have for sale. Contact us for further details. • Manufacturer: SAUER GmbH Ultrasonic • Component: Main Drive, 40,000 rpm • Operational mode: S1 • Speed 1: 36,000 rpm • Speed 2: 42,000 rpm • Output performance 1: 6 kW • Output performance 2: 6 kW • Torque 1: 1.7 Nm • Torque 2: 1.3 Nm • Voltage 1: 400 V • Voltage 2: 420 V Gujdpfx Aey Hhwkef Toh • Current 1: 10 A • Current 2: 9 A • Frequency 1: 1,200 Hz • Frequency 2: 1,400 Hz • Connection: Star • Protection type: IP54 • Vibration quality: < 1 mm/s • Cooling: Water • Rotor moment of inertia: 0.000252 kg·m² • Insulation class: F • Connection diagram: 635 • Max. ambient temperature: 40 °C • Thermal protection: KTY 84-130 and PTC

Condition: ready for operation (used), Year of construction: 2012, operating hours: 23,197 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, spindle motor power: 11,000 W, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 7, This 7-axis DMG Sprint 50 2T was manufactured in 2012. It features a maximum turning diameter of 50 mm and a turning length of 550 mm. The machine is equipped with two turrets, each with 12 driven tool stations, and offers a rapid traverse speed of 30 m/min. If you are looking to get high-quality turning capabilities, consider the DMG Sprint 50 2T horizontal turning machine we have for sale. Contact us for further details. • number of cross slides 3 • main spindle yes Guedpfsy Ey U Eex Af Tjh • sub spindle yes • max turning diameter 50 mm • max turning length 550 mm • main spindle speed max 5000 rpm • sub spindle speed max 5000 rpm • main spindle power 11 kW • sub spindle power 11 kW • driven tool speed max 6000 rpm • turret speed 401 rpm • X1/X2 axis travel 160 mm • Z1/Z2 axis travel 550 mm • Y axis travel ±40 mm • rapid traverse speed 30 m/min • electrical connection 34 kVA • max current 135 A • tailstock force 300 daN • tailstock stroke 510 mm • tailstock connection MK3 • coolant tank capacity 980 l • coolant filter 50 µm • coolant pump pressure 20 bar • collet size 52 • max hex 43 mm • max square 35 mm • 3-jaw chuck type BBD 140/39 • optional accessories tool holders driven tools collets • spindle hours 23198 h • Optional: bar loader • loading area 500 x 630 x 1250 mm • max load 350 kg • max bar weight 40 kg • material diameter range 6 to 70 mm • square min edge 6 mm • hex range 5 to 60 mm • bar length 500 to 1200 mm • spindle liner max length 2000 mm Additional equipment • Tool holders • Driven tools • Collets Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: new, Year of construction: 2018, Chip conveyor including pump, suitable for CTV 160 Gjdpfx Asy Amhyef Teuh

Condition: used, Year of construction: 1996, x-travel 600 mm y-travel 560 mm z-travel 560 mm Control Siemens size of pallet 400x500 mm Table load 300 kg feed 40.000 m/min spindle speed: 20-8000 U/min spindle taper ISO 40 Spindle capacity 13/20 KW Torque 191 Nm 4-axis horizontal machining center. Dual pallet changer. B-axis table indexing 0.001°. B-axis rapid traverse 40 rpm. KNOLL coolant system with filter and chip conveyor. 40 bar coolant supply via collar. Good condition. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Guedpfx Ajyutu Aof Tsh apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 380 mm, spindle bore: 56 mm, turning length: 345 mm, turning diameter: 380 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, overall weight: 4,200 kg, torque: 72 Nm, travel distance X-axis: 166 mm, travel distance Z-axis: 339 mm, 2 DMG Gildemeister CTX 210 for sale: One from 2007 and one from 2006. Model V2 Very few spindle hours. CNC Siemens 840D, 12-position turret VDI 30. Supplied with some tooling + documentation for each machine. Test possible by appointment. Guedpfx Afsyw Ndts Teh

Condition: ready for operation (used), Year of construction: 2014, operating hours: 2,802 h, functionality: fully functional, machine/vehicle number: 12230000107, spindle speed (max.): 10,000 rpm, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller model: Siemens 840D sl, laser power: 100 W, Highly accurate 5-axis milling, laser texturing, and laser paint removal on a precision machine! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 650 mm Travel range Z-axis: 560 mm Main spindle speed range: 20 - 10,000 rpm Main spindle drive power: 13 / 9 kW Torque: max. 83 / 57 Nm Tool holder: HSK A63 according to DIN 69893 Table clamping surface: 800 x 650 mm Table load capacity: max. 600 kg Swivel range B-axis: ± 120° Rotational range C-axis: 360° T-slots: 9 x 14 x 63 mm Workpiece dimensions: max. 650 (840) x 500 mm Number of tool positions: 30 Tool weight: max. 6 kg Tool diameter: max. 80 mm Tool diameter with free neighboring pocket: max. 160 mm Tool length: max. 315 mm Tool change time (tool to tool): 1.6 s Tool change time (chip to chip): 8.0 s Rapid traverse: 40 m/min Feed force: 7 / 13 / 10 kN Feed rate: 1 - 40,000 mm/min MACHINE DETAILS Control system: Siemens 840D sl Axes: 5 Total power consumption: 24 kVA Dimensions & Weight Guedpfx Aszcxwrjf Tsh Footprint: approx. 4.5 x 3.5 x 2.3 m Machine weight: approx. 11.5 t Operating hours milling machine Spindle hours (according to counter): 4,738 h Power-on hours (according to counter): 18,703 h Operating hours laser Spindle hours (according to counter): 2,802 h Power-on hours (according to counter): 6,177 h EQUIPMENT Swiveling rotary table Laser head 100 W Coolant system Electronic handwheel Documentation

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 1153 000006 3, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller model: Siemens 840 D Solutionline (PCU 50), spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,000 mm Feed rate X, Y, Z-axis: 20 - 60,000 mm/min Rapid traverse X, Y, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 /min Max. table rotation: 30 rpm Gujdpsyvzl Hsfx Af Toh Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Max. workpiece weight: 1,500 kg Clamping area: 800 x 800 mm Pallet weight: 570 kg Spindle speed: 20 - 8,000 rpm Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions MACHINE DETAILS Control: Siemens 840 D Solutionline (PCU 50) Dimensions & Weight Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Required space: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Operating hours "Counter external 2 (read off)": 60,197 h EQUIPMENT Chip conveyor with coolant tank Coolant/lubrication system 4x machine pallets Tool magazine Oil mist extraction unit Length measuring system Y-axis (new spare part) Lubrication unit 230V 0.12 30bar (new spare part) Gear unit ZAHNRADP-AGG*MKF1-KW2-20036 (new spare part) Cyclo gearbox*F1C-A25 (new spare part) Retrofit kit for power module (new spare part) Lifting devices for the machine

Condition: excellent (used), Year of construction: 2002, Control Siemens Sinumerik 840D Travel paths X/Y/Z: 560 x 560 x 510 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Gsdpfx Afsyrir Se Teuh Tool magazine for 40 tools, SK 40 Paper filter Chip conveyor

Condition: like new (used), Year of construction: 2009, travel distance X-axis: 200 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 280 mm, controller manufacturer: HEIDENHAIN iTNC530, workpiece weight (max.): 15 kg, table width: 200 mm, table length: 200 mm, spindle speed (min.): 42,000 rpm, Control CNC: HEIDENHAIN iTNC530 Axes X-axis travel mm: 200 Y-axis travel mm: 220 Z-axis travel mm: 280 C-axis degrees: 360º A-axis degrees: -15º max.130º Work Table Table dimensions mm: ø200 Maximum workpiece weight kg: 15 Spindle Spindle speed rpm: 42.000 Cooling Cooling through the spindle bar: 40 Tool System Tool holder: HSK-E32 Gedpfjxpg H Hsx Af Tjuh Tool magazine slots: 60 Max. tool diameter mm: ø50 Max. tool length mm: 200 Chip-to-chip time s: 10 Equipment Automation LM100 (EROWA ITS72, 5 levels of 9 positions); 10 kg maximum manipulation Electronic handwheel Chip conveyor Infrared probe High-pressure pump NC rotary tilting table Rated power kVA: 40

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you: Technical data: Control system: Heidenhain iTNC 530 HSCI Travel ranges: - x-axis: 600 mm - y-axis: 500 mm - z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC rotary table: - Table clamping surface: 600 x 500 mm - Load capacity: 400 kg - b-axis: -5° to +110° - c-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct path measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC swivel rotary table incl. table cooling - Laser tool measurement BLUM NT - Calibration mandrel with tool holder - Measuring probe infrared, manufacturer Heidenhain TS 649 - Preparation for 3D quickSET - Chip conveyor - MQL, 40 bar, tank 600 l, incl. rotating viewing window, compressed air, linear measuring systems, bed flushing - Flushing gun - Mechanical oil and emulsion mist separator - Compressed air through the spindle center - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic, side loading door - Electrical interface for articulated-arm robots - Pneumatic control and monitoring of the zero-point clamping system - Selection and de-selection of the handling system via a switch on the machine control panel - incl. additional flushing in the work area - incl. machine preparation for job management - incl. control panel arrangement on the left - Power supply to the machine table incl. 2-channel rotary feedthrough - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 clamping circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - incl. extension of the rotary feedthrough to 4 channels Operating hours: approx. 66,600 h Spindle hours: approx. 44,800 h The ball screw drives and linear guides in the x and z axes have been renewed. Accessories, tools and clamping devices shown in the pictures are only included in the scope of supply if this is noted in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved! Godpfsxgnz Tsx Af Touh

Condition: ready for operation (used), Year of construction: 2005, operating hours: 37,064 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D powerline + Shopmill, spindle speed (max.): 8,000 rpm, spindle motor power: 44,000 W, number of axes: 5, This 5-axis DMG DMC 100 H was manufactured in 2005. It features a Siemens 840D powerline control with Shopmill, a 1,000 mm travel in X, Y, and Z axes, and a speed range up to 8,000 rpm. The machine includes a HSK 100 tool holder, 270/360 tool positions, and two 800 x 800 mm pallets. Consider the opportunity to buy this DMG DMC 100 H horizontal machining centre. Contact us for more information. Gsdpfoyaaugjx Af Teuh Additional equipment • Electronic handwheel • Operating mode 4 • Oil mist extraction • Internal cooling (IKZ): 40 bar • Paper band filter • Chip flushing gun Machine Benefits Technical Machine Benefits • Number of pallets: 2 • Pallet size: 800 x 800 mm • Tool positions: 270 / 360 • Measuring probe: renishaw omp 60 • Spindle power: 44 kW (40% duty cycle) or 32 kW (100% duty cycle) • Maximum torque: 1241 Nm (40% duty cycle) or 827 Nm (100% duty cycle) Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2011, operating hours: 9,339 h, travel distance X-axis: 120 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 200 mm, controller manufacturer: SIEMENS, controller model: Sinumeric 840D, total height: 2,253 mm, table load: 10 kg, overall weight: 1,800 kg, spindle speed (max.): 40,000 rpm, number of axes: 5, This 5-axis DMG ULTRASONIC 10 was manufactured in 2011. It features a Siemens Sinumeric 840D control, a spindle with 40,000 rpm max speed, and a tool magazine with 60 slots. The machine offers a compact footprint and includes options like a DMG PP-400 Infrared probe and RS NC-4 tool measurement. If you are looking to get high-quality milling capabilities consider the DMG ULTRASONIC 10 machine we have for sale. Contact us for more information about this machine. Additional equipment • Workpiece Measurement: DMG PP-400 Infrared probe • Tool Measurement: RS NC-4 • Coolant Conditioning Equipment: KM 10 Machine Benefits Technical Machine Benefits • Surface area: less than 2 m² • Required space (lxwxh): 4100x3700x2300 mm • Machine on time: 2773 hours Gedex D Naxopfx Af Tjuh • A axis: -10° to 120° • C axis: 360° • Feedrate – feed speed range: up to 10000 mm/min • Repeatability in x / y / z: p8 μm Extra Information Workpiece NC Table with Clamping Surface: ø 190 mm ed of Rotary Axes (A / C): 100 rpm / 150 rpm Positioning Accuracy (A / C Axis): ± 5 Tools Tool Magazine: 60 items, chain magazine Chip-to-Chip Replacement Time: 15 seconds Media Compressed Air Required: 6 bar Average Air Consumption: 20 m³/hour Working Voltage: 400V (N / PE) / 50A Dimensions Machine Depth 775 mm

Condition: ready for operation (used), Year of construction: 2000, operating hours: 19,467 h, functionality: fully functional, machine/vehicle number: 1100 0000323, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, controller model: HEIDENHAIN 430, spindle speed (max.): 12,000 rpm, The spindle of the machine was replaced in 2016! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 550 mm Number of axes: 5 Table length: 630 mm Table width: 500 mm Centering bore diameter: 50 mm Maximum workpiece weight on table: 600 kg Guedeyhnm Topfx Af Teh Number of pallets: 2 Pallet dimensions: 500 x 500 mm Maximum load capacity: 600 kg Tool magazine - number of tool stations: 60 Maximum tool diameter: 100 mm Diameter with adjacent spaces free: 160 mm Maximum tool length: 350 mm Maximum tool weight: 10 kg Tool holder: SK 40 DIN 69871 Spindle speed (stepless): 20 – 12,000 rpm Feed rate: 1 – 10,000 mm/min MACHINE DETAILS Control: HEIDENHAIN 430 Connection: 50 Hz 3x 400 V DIMENSIONS & WEIGHT Dimensions (L x W x H): 3,902 x 2,687 x 2,484 mm Machine weight: approx. 9,500 kg Operating hours: 19,467 h EQUIPMENT Cooling unit Coolant through spindle (IKZ) 17 bar Pallet changer Lighting Rotating viewing window

Condition: excellent (used), Year of construction: 2003, Available directly from the tool shop Vertical machining center Make: DMG Model. DMC 104 V Linear Year of manufacture 2003 CNC Siemens 810 D Powerline Spindle hours 18,200 (July 2024) Table area 1,250 x 600 mm X-axis travel 1,000 mm Y-axis travel 600 mm Z-axis travel 500 mm Tool holder SK 40 Spindle speeds 1 - 12,000 rpm Drive 13/19 kW at 100/40% duty cycle 30-station tool changer Equipment: Linear drive on the X-axis Bed flushing system Spiral chip conveyor Gsdpfet I Di Asx Af Tsuh Direct position measuring system Drill breakage detection via laser Temperature compensation of the Z-axis via temperature sensor including active cooling unit Internal coolant supply through the spindle External air blown through 2 Pipes 700-liter coolant system, paper belt filter system with 40 bar high-pressure system Visiport viewing window on the operator door Additional machine door on the left side Bader cooling unit on the control cabinet Prepared for connecting a 4th axis with a Siemens 1FT 6064.1AF71-4AG1 drive motor and an indirect measuring system with 0.5 bar sealing air

Year of construction: 1995, condition: excellent (used), Travel X/Y/Z: 350 x 240 x 340 mm Spindle speed 6300 rpm Tool holder SK 40 Manual swivel rotary table tool holder Gsdpjlawavsfx Af Touh vice Accesories

Condition: used, NZX 1500/800SY is a CNC Turning-Milling-Drilling Center with high precision, accuracy and reliability. Capacities: 2 turning spindles, 2 revolvers, swing diameter over bed 800 mm, max. turning Ø 320 mm, max. bar Ø 52 mm; travels Z 810 mm, X 210 mm, Y 110 mm (both carriages). Specs: spindle speeds 0–6000 t/min, spindle power 22/18.5 kW, driven tools power 7.5/5.5 kW, spindle nose JIS A2-5, spindle hole 61 mm; rapid traverse X 30 m/min, Z 50 m/min, Y 20 m/min; weight ~8100 kg; overall dims L4396×W2835×H2320 mm. Accessories: direct measuring system X axis, lamp, coolant system, coolant through counter spindle, loader interface, parts catcher, workpiece conveyor, chip conveyor. Delivers tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and machine tools. Guodpfx Asyxn I Hsf Toh

Condition: ready for operation (used), Year of construction: 2003, operating hours: 20,317 h, spindle motor power: 7,500 W, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, total width: 1,630 mm, total height: 1,920 mm, overall weight: 4,350 kg, controller manufacturer: FANUC, controller model: Series 160i-8, product length (max.): 4,900 mm, number of axes: 8, This 8-axis DMG GILDEMEISTER Sprint 32 linear was manufactured in 2003. It features a turning length of 120 mm and a turning diameter of 32 mm. The machine is equipped with a Fanuc 160i-B control and offers impressive spindle speeds of up to 8000 rpm. If you are looking to get high-quality multi-spindle turning capabilities, consider the DMG GILDEMEISTER Sprint 32 linear machine we have for sale. Contact us for further details. • Turning length: 120 mm • Turning diameter: 32 mm • Axis travels: • X1: 65 mm • Y1: 350 mm • Z1: 120 mm • X2: 265 mm • Y2: 235 mm • Z2: 320 mm • C1: 360° • C2: 360° • Spindle bore: 42 mm • Total power requirement: 34 kVA • Condition: Very good; connected and ready for testing Additional equipment • Set of accessories and tool holders included Gusdpfx Aoy E Nq Asf Toh Technical Specification Counter Spindle No

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, spindle motor power: 11,000 W, total height: 2,120 mm, overall weight: 5,500 kg, product length (max.): 2,900 mm, number of axes: 3, This 3s DMG Mori Seiki NLX1500MC/500 horizontal turning machine was manufactured in 2014. It features a maximum turning diameter without interference of 366 mm, X-axis travel of 260 mm, and Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret with 12 driven stations, consider the opportunity to buy this DMG Mori Seiki NLX1500MC/500 horizontal turning machine. Contact us for further details. • Operating hours: 11,996 • Control: MAPPS M730BL • Max. turning diameter without interference: 366 mm • C-axis: 360,000° • Turning length: 515 mm • Spindle nose: A2-5" • Spindle bore: 61 mm • Bar capacity: Ø 52 mm • Turret: 12 stations (all driven), indexing time 0.25 sec • Driven tools: 6,000 rpm, 5.5 kW • Tailstock: programmable (B-axis), stroke 564 mm • Coolant pump • Oil cooler • Electronic handwheel • 3-color status lamp • Air-conditioned electrical cabinet • Condition/availability: machine in perfect condition; excellent appearance; very good condition; videos available; immediately available Gsdpfx Afoyg Iclj Tjuh Additional equipment • Chip conveyor • Bar feeder interface • Bar feeder: SAMSYS MULTI-3000 (short bar, 1000 mm) • Hydraulic chuck: KITAGAWA BB208, Ø 165 mm • Collet chuck: HAINBUCH COMBI TOPlus size 65 • HAINBUCH collets: Ø 6.5 – 10 – 16 – 18 – 20 – 25 – 26 – 30 – 40 mm • Square collets: 20×20 – 35×35 – 40×40 mm • Hex collet: 14 mm • Tool measuring probe arm • 7 driven toolholders (3 axial, 4 radial) • 15 static toolholders • Parts catcher • Automatic door opening/closing • Isolation transformer • Documentation & CD-ROM • Transport and handling clamping brackets

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11160000593, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 18,000 rpm, table diameter: 630 mm, TECHNICAL DETAILS Gedpoyhnxvsfx Af Tjuh Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Number of simultaneous axes: 5 Table diameter: 630 mm Number of T-slots: 9 Distance between T-slots: 63 mm T-slot width: 14H7 mm Centering bore diameter: 50H6 mm Max. spindle speed: 18,000 rpm Feed rate longitudinal: from 20 mm/min to 15,000 mm/min Feed rate transverse: from 20 mm/min to 15,000 mm/min Feed rate vertical: from 20 mm/min to 15,000 mm/min Rapid traverse: 40 m/min Max. workpiece height: 1,000 mm Max. workpiece diameter: 920 mm Max. workpiece weight on table: 500 kg Table indexing (B-axis): 360° Swivel angle (A-axis): +45/-30° Holding torque A-axis: 3,866 Nm Clamping torque C-axis: 6,008 Nm Max. torque: 2,650 Nm Number of tools: 180 Tool diameter: 80 mm Diameter with adjacent tool pockets empty: 160 mm Max. tool length: 350 mm Max. tool weight: 10 kg Tool holder: SK 40 DIN 69871 MACHINE DETAILS Measuring system resolution: µm Compressed air connection: 5 - 8 bar Power supply: 50 Hz 3x 400 Volt Total power requirement: 44 kVA Noise level: 80 dB(A) Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 2,628 mm Machine weight approx.: 7,500 kg EQUIPMENT Set of tool holders SK 40 approx. 150 pcs High-pressure coolant system 40 bar Coolant through the spindle (CTS) Renishaw tool probe Lighting Rotating viewing window Electrical cabinet air conditioning unit