Used Divided for sale (972)

Condition: excellent (used), Year of construction: 2018, used horizontal panel dividing saw Manufacturer: Homag Type: Sawteq B-130 (Optimat HPP130/32/32) Year of manufacture: 2018 Cutting length 3200 mm Cutting width (program slider travel) 3100 mm Roller rail 1 * element, 10-track + 4 single-track Clamps 5 pieces Air cushion table 3 * 1800 x 500 Central blower 1 piece Technical data: Saw blade overhang 60 mm Saw carriage feed: forward 1-60 m/min, reverse constant 60 m/min Automatic cutting height; pressure beam height control Crsdpfx Aiez R Sgzsiji Angular backstop, min. pressure width 0 mm; max. pressure width entire cutting length Main saw motor 5.5 kW with pneumatic saw lift Scoring saw motor 1.1 kW, motorized saw lift, electric adjustment Operating voltage 400 V (+10%/-5%) / 50 Hz Electrical connection value: 10 kW Labeling program with label printer PICA II 103 Power Control CADmatic 4 control system Optimization program CAD-Plan 4 "Single Saw" on the machine

Year of construction: 2016, condition: used, No. 10010 Screening machine Doppstadt SM 620 K Used, year of construction 2016 (overhauled by the manufacturer in 2024) Mobile drum screen on chains Can be used for humus / soil, wood, waste, compost, light building rubble, etc. 7500 working hours Crawler chassis incl. 2 driving speeds Track width 500 mm Deutz TCD3.6 L4 diesel engine, 90 kW at 1600 rpm (meets EUROMOT IIIB/Tier 4i emission standard) Auxiliary pump drive for connecting additional hydraulic equipment Reversible fan on water and oil coolers Complete engine unit swivels out Fuel tank 300 litres 5 m3 hopper capacity Hydraulically folding side belt, belt length 5000 mm, belt width 1000 mm Hydraulically folding rear belt, belt length 5000 mm, belt width 1000 mm Emergency stop switch on side and rear belt Load-sensing material feed from the conveyor floor to the screen drum Infinitely variable screening drum speed from 0 - 18 rpm Infinitely variable hopper belt speed from 0 - 0.17 m/s Control box at the rear of the machine with the following functions: Emergency stop switch (screen only) / Fold in & out rear belt / Fold in & out side belt / Bend side belt Hydraulically folding cleaning brush with individual brush elements and spring tines Central lubrication bars 24 V electrical control Radio remote control incl. transmitter, receiver, 230 V charger, 12/24 V charging cable, holder for transmitter (The following functions can be controlled: Engine stop, engine speed +/-, fold rear conveyor in & out, fold side conveyor in & out, move & steer machine, prepare stone grid open/close) Hydraulic preparation for star screen operation Hydraulic quick hitch between rear conveyor and machine Acoustic start-up warning Doppstadt Telematic system Paint finish: RAL2011 deep orange Additional hydraulic connection 40 l/min at the rear of the machine Magnetic roller for rear conveyor Flow divider on rear conveyor Internal toothed hopper belt drive Screening drum SM620 QV30-38 BL08 for SM 620 profi/Plus/.2 (length 5430 mm / diameter 2000 mm / thickness 8 mm / perforation 30 mm (offset perforation)) Transport dimensions approx. 10550 x 3000 x 3690 mm LWH Weight approx. 24000 kg Sale on behalf of customer, ex location near 85221 Dachau, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Codpsv Eyqbefx Aiiori Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: ‘purchased as viewed’ Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2023, condition: new, PLASMA PLOTTER MODEL MTX 2030 Construction: steel+aluminum Working field: 3000/2000/200 XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear strips Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Linear guides: HIWIN IGUS guideway Automatic material detection system Power supply: 240V Permissible load: 2000kg Total weight: 800kg net USB port for opening projects and transferring files using external pen-drives Sheet metal detection system THC cutting height control system Hiwin wire guides Double-sided gate drive: X-axis stepper motor and gear rails Y axis stepper motor and toothed rails Z axis stepper motor and ball screw Drives realized with Hiwin brand rails Table equipped with water grate- (Water table, giving cleaner cutting, material cooling and reducing gas emission during machining) INCLUDED: -water table -interchangeable grate -control software in Polish -Declaration of Conformity CE - DTR - warranty. -start-up and training included in the price The latest control system available in our plotters: Integrated THC height controller Anti-diving torch function Types of accepted files : DXF, PLT ( hpgl ), G-Codes (.tap) Integrated CAM module: MyMini CAM -. Automatic object recognition Ven. External. Path analysis in advance Cutting parameter database Correction of design angle to material Ability to cut from any point Possibility of cutting from the end DXF,PLT import Automatic generation of paths with offsets, entries and exits The program can be used with an external CAM program Separate speed for holes Parameter database Project correction to material angle Soft and Hardware limits THC anti-diving functions Game pad control capability Material detection by touch system, floating head WHY IT'S WORKING WE ARE POLISH MANUFACTURER OF PLASMA BURNERS CLOSE COOPERATION WITH PROMA-ELECTRONIKA COMPANY (PRODUCER OF THC) Cedpfjnfu Tljx Aiiori PROFESSIONAL GUIDE RAILS OF RENOWNED COMPANY HIWIN, A FEATURE OF THESE GUIDES IS VERY LONG LIFE, HIGH QUALITY OF CUTTING NOT REQUIRING FURTHER PROCESSING COMPONENTS SUCH AS GEARS, MOUNTS, HANDLES, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH RESULTS IN HIGH QUALITY AND REPEATABILITY OUR STRENGTHS HIGH CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUBJECT TO DUST JAMMING ADVANCED THC MY PLASM SMOOTH BURNER OPERATION CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) MOUNTED ON CUTTING MACHINES WE ASSEMBLE CUTTING MACHINES DELIVERED BY A CUSTOMER OR WE PURCHASE CUTTING MACHINES MEETING CUSTOMER'S REQUIREMENTS WE ASSIST IN ARRANGING LEASES It is possible to select the appropriate cutting machine to individual needs of the company. We offer other dimensions of tables.

Condition: new, Ruchsr Assembly line consisting of: Item 1.0 / RU-CBM 4000 work table with running rail extended by 500mm for additional assembly an aluminum holder screwing machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table Length 4000 mm, width 1400 mm, inclination of the working platform manually adjustable. Holder for fitting scissors or fitting punch. 16 pieces of swiveling counter-holders for hanging the wings, completely pneumatic Foldable for unhindered movement of the wings on the table surface. Device for scanning the sash fitting length for constant and variable/central gear seat for already drilled wings, colored Dimension recognition of the fittings. RU-SH, special screwdriver with pneumatic depth switch on carriage mounted, safety control, pneumatic height adjustment, Screw feeder with automatic shutdown of the filling container (Manual insertion for a second screw length on the special screwdriver upon request). RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4, turret stop for 4 different wing widths Swivel table mounted. Pneumatic wing measurement sensing. operated, scanning range up to 2500mm simultaneous clamping of the scanning. PSF - Pneumatic tensioning device for sashes. Working height adjustable from 900 - 1000 mm. Support table covered with felt. Running rail extended to the left by 800 mm. Item 1.1 / 5035-1 Pneumatic swivel device of the work surface with foot valve Item 1.2 / 0500000 Holder matched to customer punch/scissors. For mounting a hardware punch provided by the customer or Fitting shears (third-party manufacturer) on the sash assembly table. Please specify make when ordering!!! Item 1.3 / 5597-7 Driving device for RU-CBM on semicircular rails. The castors are on the left and right of the base frame of the table mounted. Item 1.4 / 6354-6 3 double meters of semicircular rails 30 x 10 mm. Item 1.5 / 0730000 RU-SBL3000/40 free-standing fitting bearing, Length 3100 mm, depth 1250 mm, height 2200 mm, Stand frame on the front without supports, 40 compartments, divided into 10 compartments in a row by dividers and a continuous shelf at the top, Compartment size: width 280 mm, height 150 mm. Item 2 RU-CSA-SMB aluminum holder screwing machine with automatic Screw feeding and manual feeding of the aluminum holders from one traveling box with pneumatic positioning device, Screwdriver with depth cut-off with 4-fold turret stop. Pneumatic adjustment device in the y direction against 2 pieces 6-fold Revolver attacks. Feed container for manual feeding of rotary holders or clip holder in square shape 18.5 x 18.5. The holder is manually pushed into a channel in the box and with positioned in front of the screwdriver mouthpiece using a pneumatically operated slide. Profile depth max. 150 mm, screw spacing in the y direction max. 120 mm. Item 3 RU-S48-A6-350 column slewing crane for chain hoist, with 6 m aluminum boom Version with column, smooth-running boom and sliding chassis for swivel and trolley travel Crsdpfxod Ih Huj Aiioi manually by pulling and pushing the load. Projection 6 m Construction height 4,461 m Lower edge of boom 3.722 m (top edge of boom 3.9 m) Swivel range max. 270° Painting of the steel construction in RAL 7035 The base plate is attached to the on-site hall floor At least 250 mm thick. Designed, of course, according to the valid STANDARD EN 13155...

Condition: used, GBS Prüfpuls rev3 Pulse generator for long-term insulation tests The Prüfpuls unit is designed for long-term insulation tests on test specimens with a capacity of up to 6 nF. Converter for high-voltage test transformer · Internal sine wave generator: 50-200 Hz. · Pulse width modulation 16-24 kHz of the sine wave via a full bridge. · Converter voltage adjustable from 0-600 V, Imax = 2.6 A, maximum power 1.3 kW · Pulse current limitation 110 A (shutdown threshold) Pulse transformer – drive · Drive via a full bridge · Full-bridge power supply adjustable from 0-1000 V, 1.3 A max. · Pulse current limitation 100 A (shutdown threshold). · Pulse width 20-120 μs, nominal 94 μs, adjustable · 2 selectable series inductances 150 μH, 300 μH, to adjust the pulse width or rise times to the load capacity and voltage. · Pulse repetition frequency 0.1 – 2.5 kHz, adjustable. · Polarity: Adjustable to positive, negative, or alternating, depending on the polarity of the sine wave signal. · Cosine-shaped pulse at the transformer output Pulse transformer cascade · Output transformers in a 5-stage cascaded circuit. · Total turns ratio selectable as 1:7.7, 1:10, or 1:15 via taps. · Maximum output voltage 15 kV with possible load capacities of: * 6 nF with a pulse width of 73 μs at a repetition frequency of 2.5 kHz * 10 nF with a pulse width of 103 μs at a repetition frequency of 1.25 kHz Credpeu Egz Refx Aiiji · Voltage divider 1:1000 in parallel. · Overvoltage protection at approx. 20-23 kV by parallel spark gaps · Thermistor for over-temperature detection in the 1st transformer stage. · Earth-side current measurement socket 100 mV/A. Breakdown detection, testing · If the maximum bridge currents for the transformer drive or the maximum currents of the bridge power supplies are exceeded, the high voltage is switched off. · The device has a resettable operating hour counter to determine the test time. Manufacturer's price approx. €59,500 More items - new and used - can be found in our shop! International shipping costs on request!

Condition: new, neu ca. 12 - 14 Wochen ab Auf Slowakei 25400 € 485.14 € Codpfx Aewirw Hoiijri 40 to 1250 mm X und Y Achse 100 mm 310 mm hydraulisch 38 l 6 kW 1750 mm 950 mm 1900 mm 1640 kg 420 mm 1 10 mm/s 12 mm/s 40 mm/s 0.02 +/- mm 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German

Condition: used, Year of construction: 2022, gebraucht 2022 8254 prompt, Zwischenverkauf v Türkei 22240 € 1 30 to 1250 mm X und Y Achse 150 mm 1010 mm 255 mm 265 mm hydraulisch 210 mm/s 10 mm/s 3 kW 1760 mm Crjdpfx Aswirqyeiioi 1375 mm 2135 mm 1700 kg DEMO MACHINE, MINT CONDITION NC control for immersion depth (Y) and back gauge (X) synchronization control by means of a torsion shaft sheet support arms light barriers die seat and die die seat with 4 V openings split upper tool, slightly cranked, divided pedal user manual in GERMAN incl. laser protection device Fiessler (sample photo) BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Used Filling Line Sidel For Water 2014 Air Compressor ABC 3HA-4-TFK-LT 200kw Air compressor Low Fusheng SA75 75KW Ice water Machine Nanjing Wuzhou LSBLG 1290DT 1256.8KW 298.8KW Codpfxsvlgqho Aiieri Ice water machine Shanghai Baoqing WA-78W/PT4EN-I 49kw Blow Molding Machine SIDEL/SBO20 Blower Capacity：36000P/H Power：406KW Spindle heads 262 pcs Manipulator 10pcs/each Blow moulding satation 20 pcs SIDEL Filling Machine Capacity： 36000P/H Power： 35KW Filling Valves 60pcs Capping heads 15 pcs SIDEL 36000 bph Labelling Machine Capacity： 600B/min Power： 50KW Vacuum drum 1 set Scaleplate 2 pcs Capping heads 20 pcs SMI Shrink Wrapper Capacity： 35 P/Min Power： 75KW Divider： 4 sets Infeed： 4 sets Former 5 sets TW Benifit Palletizer with Conveyor and Divider Capacity： 35 P/M Power： 25KW Used Filling Line Sidel For Water 2014, this complete line for water is in excellent conditions and ready immediately for sale

Condition: good (used), Code: 0151 Brand: BREMA Model: GLR - CE Standard CNC vertical working centre with rollers for drilling, milling, shaping and automatic insertion of any hardware insert to obtain the workpiece ready for final assembly of the furniture - CE Standard Technical data: The high flexibility of this system allows to reduce big stocks and big stores and eliminate dead-times for setting up boring machines. Different units and toolings can be mounted allowing to obtain mass-produced or made to order pieces, which are divided according to their dimensions or colour only Composition: Csdpfx Aewvkfcoiieri Vertical panel store with automatic panel drawing Roller connection device Roller loading device 8-position revolver head where 8 different heads can be mounted, complete with vacuum device - The electronic part can control from 5 to 11 axis depending on the equipment Hardware insertion units: each group is equipped with a PLC programm for the control of the whole inserting cycle Fowarding roller device Automatic panel returning device

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21201011210, empty load weight: 3,420 kg, maximum load weight: 8,380 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 07/2021, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 9,490 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 60 %, Year of construction: 2021, Please note: the images are archive photos. The vehicle may currently be in use! # Chassis – centre-axle trailer - Fine-grain steel welded construction, "10-year warranty against rust-through" - Outer frame slightly inclined with "Load-Lock-Profil" for attaching lashing straps - Gear-driven landing leg at front, folding rear support, side door stays - Steel rear underrun protection, rear corner impact protection - 1 spare wheel carrier for 1 spare wheel, with wheel fixing kit - Plastic toolbox with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with padlock (padlock not included) - Without ramps - Platform height 1080 mm – observe overall height! # Towing device – centre-axle trailer - Drawbar with certified 40 mm towing eye, haulage version - Drawbar mechanically height-adjustable via threaded spindle, below floor level, max. adjustment range 200 mm - No drawbar length adjustment # Axles + suspension - BPW drum brake axles, air suspension - Axles/running gear laser-aligned – reduces tyre wear and fuel consumption # Braking system - Dual-line compressed-air braking system, colour-coded lines for easy servicing Crsdoz R Afyjpfx Aiioi - Spring-brake parking brake - Duomatic connection at front, with connecting line to towing vehicle - EBS with EBS connector at front, with connecting cable - Caution: the trailer may only be towed by vehicles ensuring the effectiveness of the ABS! - Raise/lower valve, vehicle stability system # Wheels and tyres - 235/75 R17.5, make at manufacturer's discretion, steel rims factory silver # Electrics - 24 V, multi-chamber lamps, yellow LED side lighting - 2 white front position lamps, 2 white/red outline marker lights at rear - 1 x 15-pin connector at front, with connecting cable # Floor - Film-faced plywood approx. 30 mm, for high point loads - Floor rated for forklift loads up to 2900 kg - Platform length approx. 7300 mm # Front wall / front corner posts - Through-loading system with front portal doors, double-leaf, each with 2 internal cam-bar locks - Steel corner posts, release device for side curtain - Bridge plate approx. 2400 mm wide, divided once, approx. 350 mm long to rest on tail lift, capacity approx. 1800 kg, incl. tail lift support - (Drawbar length then approx. 2100 mm; for 1800 mm tail lift, truck coupling set-back min. 20 to max. 240 mm) # Centre stanchions - 1 pair of sliding stanchions, movable over full length, with fourfold slat pockets and long pocket at bottom - 1 pair of fixed stanchion positions # Insert slats - 5 rows of aluminium V-slats # Rear wall / rear corner posts - Steel rear corner posts up to roof underside - Curtain attachment with round tube, curtain tensioning ratchet - Rear portal doors, double-leaf, each with 2 internal cam-bar locks # Curtain - Welded-in horizontal and vertical straps, stainless steel tensioning buckles # Roof - Sliding roof, slides from rear to front - Rear end carriage folds upwards - Curtain colour: white - Optimised rain gutter at rear, on top of rear bow above doors # Country of registration / plates - Germany, with DEKRA inspection and expert report (acc. to §13 EG-FGV) - 24/7 service hotline - Fliegl manufacturer's certificate for body strength acc. to EN 12642 XL - Prepared for single-line number plate holder - White reflective strips: along bottom of side curtains and at top corners - Red reflective strips: around rear portal

Condition: new, *IMMEDIATELY AVAILABLE* Includes: badge_tk, smooth exterior walls, badge_isoboden Equipment: -GOVI 2000P -2 compartments -Deep-freeze & chiller Net price: €14,747.90 / Gross price: €17,550.00 Article number: ERT115251518.25 Technical data: • Brand: Other • Model: ER 2.5 • Vehicle type: Refrigerated trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 250 x 150 x 180 cm • External dimensions (L x W x H): 427 x 220 x 243 cm • Loading height of the floor: 59 cm • Permissible total weight: 1,500 kg • Tare weight: 600 kg • Payload: 900 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Torsion-resistant chassis for safe driving characteristics • Continuous, maintenance-free commercial axle with reinforced axle supports, hot-dip galvanized • Single-wheel suspension with large suspension travel, high inherent damping and soft suspension. • This ensures maximum driving comfort and optimal driving safety, even under extreme loads. • Special insulated sandwich floor, 100 mm thick - insulated with a non-slip, sanded surface • 4 stable telescopic crank supports • Roof and side walls 100 mm thick - insulated with seamless plastic sandwich panels with rigid foam insulation • The insulated body has an ATP certificate, with a lambda coefficient = 0.33 W/mK • Divided cooling compartment in the trailer with partition and separate temperature control for deep-freeze and chiller • Exterior color: gray • Floor, roof and corner edging made of aluminum (anodized), mounted without thermal bridges • 2-door insulated doors with stable hinges and rotating bar lock made of V2A stainless steel (lockable) • Rubber seals of the rear doors with 5 sealing blades • In an emergency, the rear door can also be opened from the inside • Stainless steel rear frame system • Doors can be swung 270° with door lock • Aluminum ram protection at the bottom, running around three sides • Standby cooling GOVI Arktik 2000 P • Cooling capacity in watts at a cooling compartment temperature of -20° C and an ambient temperature of 40° C • Temperature control range from +10° C to -20° C • Air volume flow evaporator: 1100 m³/h • Completely encapsulated unit with "outdoor" housing, mounted at the front on the top • Electronic automatic defrost of the evaporator • The control display is lockable and thus protected against unauthorized operation • Electronic digital thermostat for optimal regulation of the temperature range • Very stable V-drawbar, REINFORCED • ALKO overrun device and parking brake • Reversing aid • Plastic fenders • 13-pin plug • Reversing light • Large safety lighting Crjdpez Ri Hwjfx Aiiei • Integrated rear fog light • Lighting recessed in the rear frame • Outline lights with rubber arm at the rear on top • Reinforced automatic support wheel, for safe parking of the loaded trailer

Condition: new, mileage: 10 km, power: 125.03 kW (169.99 HP), first registration: 08/2026, fuel type: diesel, overall weight: 3,500 kg, fuel: diesel, color: white, gearing type: mechanical, suspension: air, number of seats: 3, Year of construction: 2026, Equipment: ABS, Android Auto, Apple CarPlay, EBS, air conditioning, airbag, blind spot assist, cruise control, electronic stability program (ESP), navigation system, parking heater, power assisted steering, traction control, Renault Master chassis L3, front-wheel drive 2.0 170 hp + transmission, 2 sliding tarpaulins, sunroof, sleeper cab. VEHICLE EQUIPMENT ➢ Installation option: connection on the B-pillar ➢ Tire pressure monitoring system ➢ Rain and dusk sensor ➢ Steel engine underbody protection ➢ Interior mirror "Wide View" ➢ Full-size spare wheel ➢ Standard tires ➢ Lane keeping assist ➢ Approval criterion EMRD3 ➢ LED low beam and daytime running lights ➢ RCall system ➢ Rear parking sensors ➢ Driver fatigue warning ➢ Traffic sign recognition ➢ Emergency brake assist ➢ Driver airbag ➢ Side marker lights ➢ Central locking ➢ ABS ➢ Cruise control with speed limiter ➢ Wireless charger for smartphones ➢ 10-inch multimedia system "OpenR Link" with wireless smartphone mirroring ➢ Manually adjustable air conditioning ➢ Electrically adjustable, heated and manually foldable exterior mirrors ➢ Height adjustment of the seat belt ➢ Folding key ➢ Plastic steering wheel, adjustable in two levels ➢ Central rear-view mirror ➢ Electrically operated front windows, in particular with pulse function ➢ Driver's seat with armrest and lumbar support ➢ 2-seater bench seat "mobile office" with storage compartment ➢ Cabin lighting ➢ 12 V socket in the cabin ➢ Pull-out passenger storage compartment ➢ Paneling of the partition to the cabin side with carpeting ➢ Lockable storage compartment in the dashboard ➢ Analog driver displays with a 3.5-inch TFT display (monochrome) ENGINE ➢ Engine type: Blue dCi 170 ➢ Displacement (cm³): 1998 ➢ Number of cylinders: 4 ➢ Number of valves: 16 ➢ Maximum power kW (hp): 125 (170) ➢ Maximum torque Nm: 380 – 1500 ➢ Fuel type: Diesel ➢ Emission standard: EURO VIe Equipment of the cargo area: • Sleeper cab Partner PREMIUM CAB, color WHITE • Webasto auxiliary heater 2 kW with heat distribution in the driver's cab and the sleeper cab. • Curtains for the front window in the driver's cab • Tool box 30 l. • Underrun protection. • Water tank. • Aluminum subframe. • Aluminum support frame for the tarpaulin. • Lateral supports of the support frame made of aluminum profiles • Roof supports made of aluminum tubes, embedded in rubber mountings. • Divided aluminum side walls with a height of 400 mm, construction with removable center posts. • Tarpaulin with customs closure, in black • Floor made of non-slip plywood, laminated on both sides, with mesh embossing on one side. • 10 brackets embedded in the edge of the superstructure for load securing. • The driver's cab is secured by a protective bar made of aluminum profiles. • The wheel arches are made of plastic and are equipped with mud flaps. • Bilateral side tarpaulins with tensioning device, tarpaulin with buckle closure • Sunroof system • Second battery Csdsz S Tuuopfx Aiijri • Air cushion with compressor • Lifting roof with lever – 300 mm • Superstructure with outline lights, mounted in accordance with current traffic regulations Delivery within two weeks after receipt of payment.

Condition: used, gebraucht WA0168 prompt, Zwischenverkauf v 2800 € 1 190 mm mint condition 3 divided, 1x3500 1x2000 1x1000 mm Cjdpfxsyukaio Aiieri slightly cranked

Condition: used, operating hours: 54,000 h, machine/vehicle number: LC597, Used complete line for still wine - 8000 BPHTechnical Specifications & Performance DataThis used bottling line is engineered for reliable beverage production and downstream industrial packaging at up to 8,000 bph. The configuration integrates an MBF filling monoblock (2002) composed of a rinser, filler, and capper, specifically designed for straight cork (flush-to-mouth) application. The line further features a ROBINO & GALANDRINO POKER Z 6/8 (2002) capsuling and shrink-wrapping machine, followed by APE Impianti case handling and KOSME labeling technology. This setup offers robust performance for second-hand applications and flexible format management typical of glass and PET bottle operations.Production speed: 8,000 bottles per hourFilling Monoblock: MBF (Year 2002) – Rinser, Filler, CapperCapping System: Straight cork (flush-to-mouth / tappo raso)Capsuling/Shrinkage: ROBINO & GALANDRINO POKER Z 6/8 (Year 2002)Compatible formats: Typical case pack pattern includes 12 x 0.75L; additional formats manageable with change partsContainers: Designed for bottle handling; configuration suitable for Glass (cylindrical containers)Labeling modules: KOSME STAR 720 12T (cold glue) and KOSME EXTRA ADHESIVE 12T S3 E3 (self-adhesive)Labeling capabilities: Front, back, and neck label (collarino) applicationPackaging modules: APE FORMA 2000 (case erector), APE INCA 2010 (case packer), APE INSER 2001 (divider inserter)Electrical (MBF Monoblock): 380 V, 50 Hz; installed power 17 kWElectrical (Labelers): 400 V, 50 Hz; installed power 4 kW (STAR) and 8 kW (EXTRA ADHESIVE)Pneumatics (MBF): 0.6 MPa (6 bar); air consumption 200 Nl/1'Weights: 9,000 kg (MBF Monoblock), 2,650 kg (STAR 720 12T), 2,000 kg (EXTRA ADHESIVE 12T S3 E3)Compliance: CE-marked componentsAdvanced Automation & Control SystemsThe line leverages modular automation across filling, labeling, and case-handling stations for stable throughput. The MBF monoblock and Robino & Galandrino POKER Z work in synchronized sequence to ensure precise filling levels, hermetic straight cork sealing, and professional capsule finishing. The KOSME labeling units are configured for complex dress-out requirements, allowing for synchronized application of front, back, and neck labels. Operator-friendly controls on each module support quick setup and changeover. APE Impianti packaging modules provide synchronized motion and interlocked safety protections for downstream operations.Production Line Integration CapabilitiesThis production line is designed to operate inline with conveyors and accumulation to match the 8,000 bph target. The MBF filling core ensures hygienic processing, while the ROBINO & GALANDRINO POKER Z provides versatile capsule application immediately fol... Cjdpfx Ajyh E Husiieri

Condition: ready for operation (used), Year of construction: 2016, pressure 20.0 t chamfer lenght 850 mm distance between columns 850 mm back stop - adjustable 375 + 400 mm stroke of upper beam 196 mm dayligth 470 mm ajustment speed 200 mm/sec table height ca. 900 mm total power requirement 5.0 kW weight of the machine ca. 2500 kg New price ~ 85.000 euros well-kept / very good condition (!!) with electromechanical direct drive (servo motor + ball screws) Machine is operated without hydraulic oil - in checked condition - machine video - ?v=foxzKIA7vX8 Description : High performance, fast travel speeds and the best ergonomics this bending machine to a perfect tool in terms of productivity and Accuracy. This allows an unrivaled high productivity in the field of small and middle bending parts can be achieved, since even complicated bending sequences several stations can be processed very quickly. A large number of different and universally divided tools are possible an almost unlimited variety of areas of application. Furnishing : - Stable machine frame for standing and seated operation - Deformation-optimized press beam - Highly dynamic, electromechanical. Direct drive (servo motor + ball screws) - CNC control Panasonic Toughbook incl. USB and WIFI connection - CNC controlled axes : Y + X + R + Z1 + Z2 - CNC control unit in front right, swivelling - Inductive length measuring system with temperature compensation - Ergonomic machine design - AMADA system upper tool holder - AMADA system lower tool holder - 1x brand new universal tool set (complete) - front safety device (DUAL Laser/Iris Rapid Bend) - Rear security cover Codpfxexacifo Aiisri - Laterally pivoting protective doors - 2x foot switch, for standing and sitting operation - Support tables comfort (front) - User manual (original) * Special accessories included: - 4-axis backgauge (axes X+R+Z1+Z2) * Speed X axis .. 250 mm/sec * Speed R axis .. 600 mm/sec * Z axis speed .. 1100 mm/sec * Positioning accuracy X axis .. 0.04 mm * Positioning accuracy R axis .. 0.06 mm * Travel X axis .. 375 + 400 mm * Travel R axis .. 180.0 mm

Condition: excellent (used), Dividing table – rotary table Brand: PDQ Diameter: 635 mm Height: 145 mm Base diameter: 760 mm Indexing: 45° via index Credpfxjxazu Ho Aiioi or 1° and minutes via scale Weight: 280 kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Detailed description For sale: complete aisle Automated Storage and Retrieval System (AS/RS) (Knapp) Ideal lot for integrators and logistics companies wishing to enhance their automated storage capacity. Sold as is, complete lot ready for installation. Less than 100 hours of service! Lot contents: • 10 OSR units (Knapp shuttles) – shuttles for automatic storage and handling • 2 lifts (for connecting levels) • Infeed and outfeed conveyors included (for easy integration into the existing flow) • 2,200 SILVERLINE plastic containers, European standard (or equivalent) + dividers included • Ladders, rails, and crossbars for racking (structural elements for storage) • Protective mesh (production) • No picking stations included Codpfx Aiextfa Hjieri Condition: equipment very little used. Inspected and functional. Sold as is. Numerous spare parts available! Delivery and installation possible, please contact us! No control system service or installation (software) provided. Advantages: • High automated storage capacity (2,200 containers) • Modular Knapp OSR solution, compatible with modern automated environments • Conveyors included to facilitate flow integration Price: €340,000.00 excluding VAT (complete lot). ⚠️ Important: ISC Recycle only handles the sale of the equipment. Integration available upon request.

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 2460061, Technical specifications: # Machining Workspace: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A) + indexable dividing head with direct angular measurement system, max rotational speed 50 rpm, accuracy +/- 5 arcseconds # Max. clamping dimension/part: Ø 575 x 830 mm; max. weight 360 kg # Rapid traverse (X/Y/Z): 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Distance between spindles: 300 mm # Spindle speed range: 1–17,500 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2x32 tools / average chip-to-chip time 2.5 s # Max. tool Ø 75 mm / max. length 275 mm / max. weight 7.5 kg Electrical data: # Voltage: 3x400V/50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Required installation footprint: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring system: Heidenhain linear scales # Chip extractor: Knoll Type 550 K-1 # Oil cooling unit # Spindle, guideways, and switchboard cooling system # 2 oil lubrication units # Oil mist extraction/recovery system: ELBARON Vario E2000 (2,000 m³/h) # Oil filtration system with paper filter, max. 80 bar: Knoll KF200/1200 # Fire suppression: Kraft & Bauer # Part presence monitoring P/Y: with low pressure air detectors Csdpfx Aiexw R Udjieri # In-process measurement: Marposs T25 # Tool breakage monitoring & length measurement: inductive sensor # Tool holding confirmation in main spindle Machine status: NOT OPERATIONAL # Motorised loading/unloading door # Table A axis # Tool magazine chain # Euchner safety switch, loading door # 5 hydraulic switches (Parker) # 2 pneumatic pistons for tool magazine access # 2 pneumatic pistons for tool clamping # Complete hydraulic system # Hydraulic motor (motor can also be retrofitted) # Compressed air regulator # Chip conveyor/extractor – needs repair # Z-axis linear scale # X-axis linear scale # Numerical control flash card # 4 communication modules (Murr) # 1 of 2 spindles defective – replacement spindle available in stock

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 1830108, Technical specifications: # Machining workspace: X 300 mm; Y 650 mm; Z 400 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A-axis), 360° indexable dividing head (resolution 0.001°) # Number of pallets: 2; Maximum table load: 400 kg # Maximum clamping/part size: Ø 575 x 830 mm; maximum weight: 360 kg # Rapid traverse rate: X/Y/Z 75/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Number of spindles: 2 / spindle spacing: 300 mm # Spindle speed: 1–10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tools / chip-to-chip time approx. 2.5 s # Tool max. Ø75 mm / length max. 275 mm / max. weight 7.5 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 70 kVA / 125A Dimensions: # Installation footprint: approx. 3.9 x 3.2 x 3.1 m # Weight: approx. 10,500 kg Scope of supply: # CNC control: Fanuc 30i-Model A # Linear axis measuring system: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling unit # High-pressure oil filtration system max. 40 bar: Knoll AE 1060 # Cooling system for spindle, guides, and switch cabinet # 2 oil lubrication units # Part present sensing (P/Y): with low-pressure air sensors # Broken tool detection: Blum Novotec Laser Light Probe # Tool support detection system in working spindle Csdpfx Aexw Ukvoiiori Machine condition: NOT OPERATIONAL # Magazine chain broken — REQUIRES REPLACEMENT

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Tool Grinding Machine Michael Deckel S11 with Accessories and Tool Cabinet in Excellent Condition! Technical Data: >> Year of manufacture: 1992 >> Serial No.: 1673 Clamping Range: >> Tool slide mounting surface: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool diameter with overhung mounting in universal dividing head: 620 mm >> Max. tool length between centers: 270 mm >> T-slot width on machine base: 12 mm >> T-slot width on grinding head, tool slide and accessories: 8 mm Travel Range: >> Working travels: Grinding stroke: 190 mm Grinding stroke for helical grinding: 190 mm Cross travel of tool slide: 100 mm Vertical feed grinding head: 325 mm Longitudinal adjustment of grinding spindle: 5 mm >> Coarse adjustment travels: Tool carrier: 220 mm Grinding head support: 800 mm Universal dividing head on tool slide: 330 mm >> Swivel angles: Grinding head support: 360 degrees Grinding head: 360 degrees Tool carrier: 360 degrees Grinding Spindle: Three-phase drive motor 1.1 kW at 2800 rpm Spindle speeds, stepless: 2000 to 10,000 rpm Max. grinding wheel diameter: 125 mm Max. cut-off wheel diameter: 200 mm Dimensions: Cedpfx Aiexu E Nqsijri Weight: 520 kg Dimensions (Depth x Width x Height): 800 x 1100 x 1760 mm Required space (including operation): 2.5 x 2.3 m Accessories and Equipment: 1 pc. Tool cabinet with contents: >> See pictures About the machine: Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, single parts and small series can be ground astonishingly quickly, economically and flexibly, all while providing maximum operating comfort. The Deckel S11 is in excellent condition and comes equipped with extensive accessories. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.

Condition: excellent (used), Lazy Susan Rotary Table Crodohlp Ipepfx Aiiei Nylon top with dividers Distance between dividers: 60 mm Diameter top: 1250 mm Height adjustable legs Total dimensions: 1250 mm x 1250 mm

Condition: used, Year of construction: 2012, Condition: Used, ready for operation • The first unit is equipped with a Ø190 mm calibration roller with a grooved rubber coating, hardness 90 Shore. • The second, combined unit contains a Ø190 mm sanding roller with a grooved rubber coating, hardness 40 Shore. In addition, it includes a hard felt sanding pad mounted on an aluminium rail, with a graphite-grain surface for fine sanding. The pad is equipped with timer-controlled automatic operation. Options: Electronically controlled sanding pad divided into 42 sections. The unit is driven by an independent motor with inverter-controlled speed adjustment and the possibility of changing the direction of rotation. • The third unit is a finishing brush roller. Technical specifications: Working width: 1350 mm Sanding belt size: 1380 x 2200 mm Workpiece thickness: 3–160 mm Motor power of first unit: 11 kW Motor power of second (combined) unit: 11 kW Feed speed: 3–16 m/min Feed motor power: 1.5 kW Pneumatic connection: 6 bar Air consumption: 17 Nl/min Extraction port diameter: 158 mm Extraction air speed: 25 m/min Required extraction capacity: 3095 m³/h Net machine weight: 2450 kg Width: 2320 mm Length: 2030 mm Height: 2050 mm The table movement is carried out by four large-diameter trapezoidal threaded lead screws, which are mounted externally on the machine frame. Table rollers: one roller is positioned before and one after the feed belt. • The feed belt has a 60 Shore hardness rubber surface with a concave pattern. • Precise tracking of the feed belt is ensured by an automatic centering unit. PRESSURE HOLD-DOWN UNITS • Rubber-coated pressure rollers are positioned before and after the processing units to ensure accurate holding-down of the parts being sanded. SAFETY EQUIPMENT • with CE standards. Options: • Electronically controlled sensing unit for the 42-section sanding pad • Front table extension with two roller cylinders • Rear table extension with two roller cylinders • Complete vacuum table with vacuum pump: 2.2 kW – 3 HP • Electro-pneumatic engagement/disengagement of the contact roller • Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System) • Kombi R (drum) Ø190 – electronically controlled sanding pad divided into 42 sections (32 mm pitch) • Electro-pneumatic engagement/disengagement of the contact roller Codpezlxp Ssfx Aiieri • Electro-pneumatic engagement/disengagement of the sanding pad • Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System) • Possibility of reversing the sanding belt rotation direction • Electronic inverter 11 kW (15 HP) • IPC COMPACT 8.5" control panel • Scotch Brite roller Ø200 mm – 1.1 kW – 1.5 HP Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: good (used), Code: 0445 Brand: LANDONI - ITALY Model: AGM 1 - CE Standard Portable electric sawig machine for heading and dividing of packed boards and logs - CE Standard This pack cutter is also suitable for the cutting of rolls of paper with the specific Widia chain, and for the cutting of plastic blocks or tubes Technical data: Cedpfx Aijzl Dn Heiori Straight-tooth chain DLC-type with pitch 1" Chain tensioner for automatic chain tensioning Guide bar lenght cm 240 Useful cutting cm 200 Electric motor Hp 12,5 three-phase Automatic oiling of the chain Overall dimensions: mm 1800 x 900 x 3000 h Dimensions for transport: mm 3900 x 900 x 1900 h Weight kg 300

Condition: used, maximum load weight: 12,560 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2019, next inspection (TÜV): 05/2027, total length: 9,630 mm, total width: 2,550 mm, total height: 3,600 mm, Equipment: ABS, tail-lift, * EWERS beverage racking system * Side walls, divided into 2 sections, for folding up * BÄR tail lift * Additional crank supports at the rear * Fixed front wall * Storage box ----* Krone axles with disc brakes ----* Tire dimension: 385/65R22.5 * Technical total weight: * Tare weight: 5440 kg Csdpozvk Unofx Aiiori * Overall length: * Next inspection due: 11.2026 ----Vehicle number: 12386----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will be happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/main inspection, complete export processing, arranging financing, applying for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport.----?YOUR VTS TEAM

Condition: excellent (used), Year of construction: 2006, 513 USED KEMPER MINI QUADRO ROUND bun divider-rounder. Line for rolls, ciabatta, and bread. Crsdpfjzugm Dox Aiiei Production: - square and elongated buns - round buns - stamping/marking - 4 rounding drums - moistening station - seeding station TECHNICAL DATA: - year of production: 2006 The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.