Used Disinfection for sale (95)

Year of construction: 2008, condition: excellent (used), We offer a KRONEN GEWA 3800V PLUS vegetable washing machine (year 2008, 6.3 kW, 3×400 V) complete with a KRONEN GE 11 air blow-off unit (year 2008, 2.2 kW, 3×400 V, 50 Hz) a professional, continuous washing and dewatering solution for lettuce, vegetables, herbs and fruit. The GEWA 3800V PLUS is a universal washer for pre-washing, washing, disinfecting, mixing and rinsing both cut and whole products such as baby leaf, iceberg, vegetables, herbs and fruit. It uses KRONEN’s HELICAL washing system, where the product travels through the wash tank in a spiral water flow up to ten times the tank length. This ensures thorough yet gentle cleaning, optimal product distribution and significantly reduced water consumption compared to conventional flotation washers. Floating and sinking products are conveyed through the tank by the helical water flow. At the end of the tank, product and water overflow to the vibration outfeed, where the product is sprayed with fresh water and pre-dewatered, while the water is filtered and returned to the pump tank for reuse. A built-in sand trap separates heavy dirt such as sand and small stones at the bottom of the tank, preventing it from returning to the product flow. The machine is built entirely from AISI 304 stainless steel with excellent hygienic design and easy access for cleaning and maintenance. All pipes, pump casing, wash and pump tanks and covers are stainless steel; in the PLUS models with vibration outfeed there are no screws in the product area, which further improves hygiene. The set includes a KRONEN GE 11 air blower (2008, 2.2 kW, 3×400 V, 50 Hz), designed to blow off water from the product surface after washing. Placed after the washer, it improves dewatering, reduces the load on subsequent centrifuges/dryers and enhances shelf life and appearance of the final product. Technical specification KRONEN GEWA 3800V PLUS Manufacturer: KRONEN GmbH Model: GEWA 3800V PLUS (with vibration outfeed) Year of manufacture: 2008 Max. capacity: up to 2,500 kg/h (depending on product and dwell time) Power: approx. 6.3 kW, 3-phase Voltage: 3×400 V, 50 Hz Tank volume: approx. 800 l (GEWA 3800 PLUS series) Material: AISI 304 stainless steel – pipes, pump casing, wash and pump tanks, covers Outfeed: vibration outfeed with fresh water spray and pre-dewatering Function: continuous pre-washing, washing, disinfection, mixing and rinsing of cut and whole lettuce, vegetables, herbs and fruit Washing system: HELICAL spiral washing system with adjustable water flow Features: Sand trap sedimentation unit for heavy particles Reduced water consumption through recirculation and filtration Gjdsytthmepfx Ab Dsit Compact, modular design – easy integration into processing lines Technical specification KRONEN GE 11 air blow-off Model: GE 11 air blower Year of manufacture: 2008 Function: air blow-off / dewatering after washing – removes surface water from product Power: 2.2 kW Voltage: 3×400 V, 50 Hz

Condition: used, Year of construction: 2010, machine/vehicle number: M245, Used Filling Monoblock Galdi Up to 6000 BPH Introduction to Advanced Bottling Technology Initially, the Galdi RG260A, a high-performance filling monoblock from 2010, stands as a cornerstone of modern bottling operations. Having been recently overhauled, it showcases unmatched efficiency and reliability. Consequently, achieving speeds of up to 6,000 bottles per hour, this machine sets a benchmark in the industry. Specifically, it is engineered for Pure-Pak Daimond Standard Curve B-style T-Bottom containers. Moreover, it utilizes 36mm Elocap caps, demonstrating its versatility and adaptability to various packaging needs. Ensuring Uncompromised Product Safety of the Filling monoblock Galdi Importantly, one of the critical aspects of the Galdi RG260A is its disinfection killing rate. With up to LOG5, it guarantees the highest levels of product safety. This capability is especially crucial in today’s market, where consumer health and safety are paramount. Therefore, the machine’s design and operational protocols are aligned with strict hygiene standards, offering peace of mind for producers. Adaptable to a Wide Range of Products Furthermore, the machine’s flexibility is highlighted by its capacity to handle multiple packaging cross-sections. From 500 ml to 1000 ml, it accommodates various product volumes. This adaptability extends to the machine’s ability to process a diverse array of products. Whether dealing with dairy, juice, liquid food, or high-viscosity substances, the Galdi RG260A stands ready. Additionally, its design supports products containing particles and fibers, ensuring smooth operation without compromising quality. Customization and Efficiency in Chilled Distribution Gjdpfsvgt N Hox Ab Djit Moreover, tailored to meet specific customer requirements, the machine features a 36 mm XE cap applicator. It also includes a cap feeding system, enhancing operational efficiency. The inclusion of a CIP return pump underscores the machine’s commitment to hygiene and easy maintenance. By employing gravity or light depression filling, it ensures accurate and gentle handling of products. Technological Excellence for Optimal Performance Additionally, the Galdi RG260A is equipped with advanced technological components. These include a double indexing magazine and a LOG5 killing rate sterilization system. Sterile air filters and a servo-driven cross cap applicator contribute to its superior performance. The aseptic double diaphragm filler, with specialized intake and discharge valves, ensures hermetic sealing from external environments. Innovative Filling Solutions of the Filling monoblock Galdi Furthermore, the machine employs a bottom-up filling system, designed to reduce splash and foam. This approach is critical for maintaining product integrity and appearance. A special closed filling box for the aseptic filling room and automatic CIP-SIP system further enhance sanitary conditions. Pressurized by sterile air steam, the system maintains a sterile environment throughout the filling process. Universal Compatibility and Energy Considerations Lastly, the universal transport chain accommodates all carton configurations, emphasizing the machine’s adaptability. With an operational consumption of 400 V...

Condition: used, Year of construction: 1999, operating hours: 500 h, machine/vehicle number: LC392, Used Water Complete Bottling Line Flat Drinks 300 bph 18.9L CapSnap The CapSnap Adapta Series is a modular integrated bottle washing, filling, and capping system. It is the perfect solution for medium-sized HOD water bottling operations. Designed for adaptability – these machines can be configured to handle both 3-Gallon and 5-Gallon bottles. This complete system effectively handles 300 – 600 BPH. Manufacturer: CAP SNAP – Portola – USA Year of production: 1999 (completely refurbished in 2015 and since then it has worked only 500 hours) Capacity: 300 bph Required energy sources: air 6 bar, power 40 kW, cleaning water supply 2 bar and filling water supply Line composition: Semi-automatic cap removal device: This device is used to remove caps from bottles. Gsdpfx Absvgud Sj Deit Entrance conveyor: On this conveyor belt, the bottles are manually placed. Prewash with cold water through nozzles: This is the first stage of washing, using cold water. Wash with warm water and detergent through nozzles: This is the second stage of washing, which uses warm water at 50°C with detergent. Rinse with cold water and disinfectant through nozzles: This is the last washing stage, which uses cold water and disinfectant. Bottle filling outlet conveyor: The bottles are filled here, two at a time. UV Filter: The water is filled through a UV filter, which is built into the water inlet of the bottle. Transport of filled bottles to the capper: Here, the bottles are transported from the filler to the capper. Dosage caps through disinfectant on the bottle: Here, the caps are disinfected and ready to be put on the bottles. Bottle cap cylinder: Here the bottle cap is applied. Output conveyor: From here, the bottles are manually loaded onto pallets. Each part of this system has a specific role in the process of bottle filling, and all together they form a functional production Used Water Complete Bottling Line.

Condition: used, Bottle washer, make Krones, type: KES 1-5-190/14-110 R, single-end machine in stainless steel, for 13.200 bph, 14 Gijdporxuv Asfx Ab Dst bottles/row, with 110mm cell pitch, with pre rinsing, presoak bath, caustic soaking and caustic spraying, 4 water spraying (2x warm + 1x cold + 1x fresh water), with headboard disinfection, S7 control, built 1996. L: ~12.500 mm, W: 4.645 mm, H: 3.500 mm, weight: 33.000 kg

Condition: good (used), Work line incl. Meiko equipment Ideal for use in hospitals, retirement homes or sanatoriums. Everywhere where visually appealing products and good hygiene properties are required. Resistant to cold, heat, moisture and many chemicals. Wear and corrosion resistant. Features: -2 hinged doors, for quick access -1 large sink Dimensions approx. - Height 90 cm without backsplash - width 210 cm - depth 59 cm + MEIKO faeces flusher KD 40.1 Use: For cleaning of bedpans and urine bottles. -thermal disinfection -stainless steel front for easy disinfection -digital display with control panel Electrical connection: 230V / 50 Hz + MEIKO disinfection rinser Use: For rough cleaning of urine bottles and bedpans. During the rinsing process the faeces are rinsed off with a large amount of water under pressure. rinsed off under pressure. Gijdpelikd Rjfx Ab Dst Item condition:used

Year of construction: 2022, condition: new, 1 x Niro-Tech SHM2 pass-through hygiene station, comprising of boot-wash, hand sanitising/disinfecting station and turnstile. The boot-wash features traditional rotating brushes which clean and disinfect work shoe / boot bottoms with automatic dispensation of disinfection / sanitising fluid. The hand-sanitising station automatically doses sanitising solution when hands are inserted in the specially designed sockets. Can be manufactured so as to run Right – Left or Left – Right depending on your factory requirements. Dimensions – 1620mm wide x 1080mm long x 1400mm high. Electricity – 400v, 50hz, 3 phase. Manufactured in AISI 304 stainless steel. Brushes can be chosen in blue, red or white colours. Gjdpfx Aohr Rqleb Doit

Condition: good (used), functionality: fully functional, Offered is a hygiene sluice/disinfection sluice by Blue Level DLSO 2000. 400V, 16A. Complete V2A stainless steel construction. New brush rollers. Dimensions (L x W x H): 273x95x177 cm. Immediately ready for use, fully operational. Further information upon request. Payment in cash or advance payment. Sale only to commercial customers. No warranty or guarantee. Gjdeynkh Tjpfx Ab Dsit

Condition: new, The Instrument Reprocessing Revolution Careclave can be installed quickly and easily in any reprocessing room. Four process steps in one device – compelling advantages for your practice! Why use four separate instrument reprocessing products when you can have everything in one? With Careclave, you'll save significantly more time, money, and space in your dental practice from day one compared to conventional device combinations: €6,000.00 less in service costs: Because fewer devices mean lower costs. Careclave is not only more affordable to purchase, but it also saves you the extra maintenance and validation costs for additional devices. 45% more space in the reprocessing room: Your practice team knows that workspace in the reprocessing room is valuable. With Careclave, you have significantly more space for the safe reprocessing of your instruments! You can do without an additional care device. 33% more transfer instruments per cycle: Careclave is a real speed demon. Reprocessing eight hollow instruments in just 16–18 minutes guarantees rapid reuse and thus reduces the need for additional instruments. The revolutionary 4-in-1 solution combines the entire instrument reprocessing process in a single device: 1. Cleaning and Disinfection Careclave® ensures the cleaning and disinfection of up to eight handpieces, prophylaxis handpieces, or ultrasonic scaler tips in just 16 minutes. 2. Maintenance Careclave gently and quickly maintains the handpieces in the Carebox. With the world's first integrated ADDcare maintenance station, the crucial chuck maintenance is also performed directly at the Careclave. 3. Sterilization (Class B) With its patented DRYtelligence® and double-jacket technology, the Careclave offers everything you would expect from a modern autoclave – and more: Sterilize up to 11 kg of instruments on up to 8 trays or in 4 MELAstore® boxes in record time. Thanks to the revolutionary chamber design, reprocessing and maintaining instruments in the Carebox, as well as simultaneously sterilizing other instruments on short trays, is possible in a single cycle. 4. Documentation and Release With ProControl, you can provide proof of flawless instrument reprocessing quickly, securely, and paperlessly. Documentation and release are performed directly on the Careclave® display without the need for additional software. For seamless traceability, the reprocessing protocols are saved to the MELAG USB stick or on the practice network. Gedpfx Aeyk Eqbeb Doit 4. Documentation and Release Model: Careclave 618 Dimensions (D x W x H): 65.3 cm x 48 cm x 56.2 cm Fits a 60 cm tabletop Internal dimensions: Ø 25 cm x 35 cm Area of ​​application: Dental Power supply: 220–240 V, 50 Hz Power consumption: 3 kW Compressed air connection: 4–8 bar Validability: Validatable Sterilization class: Class B Documentation: USB, network Chamber volume: 18 liters Load capacity: 11 kg instruments / 2 kg textiles Suitable for textiles: Yes Suitable for hollow instruments: Yes Suitable for endoscopes: Yes Drying: Integrated drying system Color: White Weight: 69 kg MSRP €21,509.00 Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2013, condition: good (used), BHT INNOVA E3 Professional Bronchoscope Washer INNOVA – Professional Endoscope Washer for Practices and Small Clinics The INNOVA™ E3s is the world's best-selling BHT endoscope washer. This endoscope washer is compact and offers a high capacity for endoscopes or bronchoscopes. Depending on the reprocessing, a total of 10 to 20 endoscope reprocessings are possible daily. This makes it the perfect solution for private medical practices and small clinics that value safe hygiene, efficiency, and reliability. Reliability and maximum cleanliness in every cycle: Compliant with DIN EN ISO 15883-1/-4 and the guidelines of the Robert Koch Institute (RKI), and with many additional functions, e.g., thermal self-disinfection at 90°C according to DIN EN ISO 15883-4, 4.8.1. - Flexible in combination with another INNOVA® E2 or E3 for 30 to 40 reprocessings daily. - Suitable for both glutaraldehyde and peracetic acid from a wide range of suppliers. - Suitable for commercially available endoscopes from Fuji, Olympus, Pentax, Storz, and Wolf. - Single-channel connection or patented pressure chamber available. - Thermal reprocessing option, e.g., for multiple biopsy forceps, polyp loops, etc. - Thermal disinfection of the final rinse water as recommended by the Robert Koch Institute (RKI) for the DH version. - Secure documentation and traceability through batch control. User and endoscope identification via barcode scanner. - Data output via printer, data logger, or computer interface. Easy integration into existing IT systems Number of endoscopes: For 2 endoscopes or 4 ENTs Hygienic design: Hygienic workflow, single-door Channel connection system: Single-channel connection or patented pressure chamber system possible Single-channel monitoring system (CMS): No Chemistry Glutaraldehyde / Peracetic Acid: Both possible: DH version (with boiler, for glutaraldehyde) or DC (filter solution, for glutaraldehyde or peracetic acid) Documentation and integration: Yes, interface for printer/data logger as standard. Printer as standard. Optional scanner/IT interface Thermal reprocessing of instruments at 90°C: Available with additional equipment Electrical installation: 3-phase 400 V / 50 Hz AC+N+PE. Connected load: 11 kW. Fuse rating: 3 x 20 A Year of manufacture: January 19, 2013 Gjdpfxjin Edwo Ab Doit Item condition: used Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), KEN 2311-HOS Laboratory washer-disinfector KEN 2311-HOS is a compact washer-disinfector. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and ventilation tubes, surgical shoes, as well as bottles, trays, glassware. There are several versions: single-door and double-door (pass-through) models. Pass-through machines are always preferred because the physical separation of "dirty" and "clean" areas optimizes the hygienic environment and reduces the risk of cross-infection. ■ User-friendly control panel - ensures correct operation. ■ Possibility of individual program selection. 4 programs as standard ■ Process indicator bar shows how far the program has progressed. Giodpfxeiuzkmj Ab Dot ■ Double monitoring of temperature (EN/ISO 15883). ■ Possibility to connect 2 types of chemicals ■ Lockable lower compartment for storage of chemicals. Specifications Mains connection 3 x 400 V,N,J, 50Hz Connected load/fuse 10kW/16A Water connection Cold untreated water: 1 piece, ¾" RG, 5-30°C, 0-30°dH Water connection Hot soft water: 1 piece, ¾" RG, 30-70°C, 0-3°dH Water pressure 200-800 kPa Outlet valve Ø 50 Water quantity (approx.) per withdrawal 13-14 l Pump capacity 370 l/min Free depth 2 doors 560 mm Free depth without center plane 510 mm Free width without center plane 510 mm Noise level approx. 59-64 dBa (sound pressure) Tightness class IP 21 (not suitable for dishwasher) Height: 1740 mm Width: 600 mm Depth: 601 mm Condition: This unit was removed in working condition due to a site closure and has been stored since. It appears to be in very good condition. Unfortunately, we do not have the knowledge or instrumentation to test the unit further and Therefore, this unit is being sold as is, in the condition it is pictured here. If you would like to test or inspect this unit prior to purchase, please contact us anytime to schedule an appointment. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: good (used), KEN 2311 Laboratory washer-disinfector KEN 2311 is a compact washer-disinfector. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and ventilation tubes, surgical shoes, as well as bottles, trays, glassware. ■ User-friendly control panel - ensures correct operation. ■ Possibility of individual program selection. 4 programs as standard ■ Process indicator bar shows how far the program has progressed. ■ Double monitoring of temperature (EN/ISO 15883). ■ Possibility to connect 2 types of chemicals ■ Lockable lower compartment for storage of chemicals. Specifications Mains connection 3 x 400 V,N,J, 50Hz Connected load/fuse 10kW/16A Water connection Cold untreated water: 1 piece, ¾" RG, 5-30°C, 0-30°dH Water connection Hot soft water: 1 piece, ¾" RG, 30-70°C, 0-3°dH Water pressure 200-800 kPa Outlet valve Ø 50 Water quantity (approx.) per withdrawal 13-14 l Pump capacity 370 l/min Free depth 2 doors 560 mm Free depth without center plane 510 mm Free width without center plane 510 mm Noise level approx. 59-64 dBa (sound pressure) Godpfx Aboiuzlve Djit Tightness class IP 21 (not suitable for dishwasher) Height: 1740 mm Width: 600 mm Depth: 601 mm Condition: This unit was removed in working condition due to a site closure and has been stored since. It appears to be in very good condition. Unfortunately, we do not have the knowledge or instruments to test the unit further and Therefore, this unit is being sold as it is pictured here. If you would like to test or inspect this unit prior to purchase, please contact us anytime to schedule an appointment. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Year of construction: 2020, operating hours: 1 h, condition: new, - Pressure washer PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, ... - cold water / hot water / steam 32 bar up to 140°C / high pressure steam 150 or 200 bar up to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar Gsdpfjfh Skasx Ab Dsit - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and empty weight : 110x64x98cm, approx. 150kg - incl. 10 m high pressure hose, spray gun, lance and flat jet nozzle 25°.

Condition: used, Manufacturer: Hanovia UV Model: PMS150G4/4 Type : Ultraviolet disinfection system Application: Ultraviolet (UV) water/liquid treatment Pressure rating: 7 bar Maximum pressure loss: 0.15 bar Maximum flow rate: 133 L / min - 8 m3/hour Temperature: 80°C Gjdpfx Asx R A Iljb Dsit

Condition: new, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 90 degrees: square 260 mm capacity 45 degrees: flat 230 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 230 mm capacity 60 degrees: flat 170 x 100 mm capacity 60 degrees: square 155 mm capacity 60 degrees: round 175 mm turning speed range: 18 – 110 m/min dimensions of saw-band 3.375 x 27 x 0,90 mm work height max. 880 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 840 kg dimensions of the machine ca. 1.900 x 1.850 x 2000 mm Furnishing : - miter left 45 ° automatic operation - miter left 60 ° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gear from a single source - very quiet cut and very low vibration - Chip tray can be removed (disinfection) - Shockproof and ergonomic control panel with oil-proof EPDM cover - Easy access to the saw, material and feed unit - Foldable safety cover - Fine adjustment of the feed rate - semi-automatic cut BERG SCHMID CNC control: - Possibility to enter various parameters such as number of pieces and material length, automatic calculation of the cutting channel - for 10 different sawing programs, with 99 sub-programs - for different lengths and quantities e.g. 1x cutting program with various cut lengths - Incremental feed with automatic length compensation - Adjustable for cut lengths from 2 mm to 9,999 mm, remaining piece length 170 mm - Single stroke - feed slide 500 mm Gijdpfjxabacsx Ab Dot Info from the manufacturer: When installing this saw in the network with Residual current circuit breaker (FI) should this universal current sensitive and not below 300 mA be executed.

Condition: used, Knife disinfection machine, knife disinfection device -GENO: dishwasher 1988 -Metal case with: accessories see photo -Dimensions: 510/410/H210 mm -Weight: 19.5 kg Godpfxod Tgaqo Ab Dsit

Condition: used, Soap dispenser, universal dispenser, disinfection dispenser -Content: 500 ml -Price: per piece -Number: 13x available -Dimensions: 80/150/H300 mm Gisdpjb Uhkkjfx Ab Djt -Weight: 1.2 kg

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, operating pressure: 10 bar, machine/vehicle number: 5789, CYCLONE MAXI is an indispensable and powerful 10 bar steam cleaning machine designed for a wide range of industrial environments and applications in demanding and diverse sectors such as food and beverage processing and manufacturing, transportation, and general industry. The CYCLONE MAXI range has been conceived and developed to provide a truly professional alternative to conventional cleaning equipment, with a focus on cleaning effectiveness while minimizing environmental impact. The hot, dry steam penetrates deep into surfaces to deliver thorough cleaning and disinfection. Gedpfxoyft T To Ab Dsit CYCLONE MAXI is supplied complete with a set of professional tools and accessories. CE-PED tested/certified Accessories: 6-metre steam hose Steam gun

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, New filling machine / dosing machine, suitable for filling a variety of liquids. Gjdjrivxcepfx Ab Deit Examples include: - Milk - Water - Alcohol - Disinfectants - Etc. This is a robust machine that operates on compressed air and 220V, Plug and Play! It is ideally suited for filling small batches. Only a very small air compressor is required to operate the machine; if desired, this can be supplied as well. We recommend at least a 12L compressor. The filling machine is equipped with a 1000ml cylinder, allowing it to dispense a maximum of 1000ml per stroke. For larger volumes, multiple strokes can be programmed. For example, 2500ml can be easily filled in 2 x 1250ml. The minimum dosage per stroke is 100ml; any volume between 100 and 1000ml can be filled in a single stroke. We also offer models with cylinders up to 5000ml per stroke. The unit comes with a suction hose, enabling direct suction from a barrel or IBC container. The machine features a foot pedal and an automatic mode. In automatic mode, the machine will continuously fill, making it simple and fast to handle larger quantities. The foot pedal allows for manual filling at your own pace. Depending on the operator and the volume per fill, between 15 and 25 units per minute can be filled, making this a very fast machine. The machine weighs approximately 15-20kg and can be conveniently placed on a table. Entirely constructed from stainless steel, it is a very high-quality, industrial-grade machine. For questions, please feel free to email; we are happy to assist with this or another machine. We also supply a labelling machine which is a perfect match for the filler. We strive to respond to your inquiries within 24 hours. Of course, we are also available by phone. Our office hours are Monday to Friday, 09:00–17:00.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: DC, warranty duration: 24 months, compressed air connection: 2 bar, overall weight: 20 kg, filling weight (max.): 1,000 g, filling weight (min.): 100 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New Pneumatic Filling Machine / Filler – Plug & Play Gjdpfx Abjrivwfe Dsit For sale: new filling machine suitable for dispensing liquids, pastes, and semi-viscous products, such as: - Disinfectants - Shampoos & lotions - Creams - Honey & jam - Milk & yoghurt - Water & alcohol - Sauces (e.g., pesto) - Etc. Simple, reliable, and immediately deployable This filling machine operates on compressed air and 220V and is fully plug & play. As a result, the machine is very user-friendly and particularly suitable for filling small to medium-sized batches. A small compressor is sufficient to run the machine; one can be supplied if desired. Flexible filling (100 – 1000 ml) The machine is equipped with a 1000 ml cylinder, allowing for a maximum of 1000 ml to be filled per cycle. - Minimum fill quantity: 100 ml - Any quantity between 100 and 1000 ml can be dispensed in a single stroke - Larger volumes can easily be achieved by multiple cycles Large hopper & expansion options Standard supplied with a 30-liter stainless steel hopper. There is also the option to connect to an IBC container or 200-liter drum, enabling quick and efficient handling of larger filling volumes. Manual or automatic operation The machine offers: - Foot pedal – fill at your own pace - Automatic mode – continuous filling cycle for higher volumes Depending on the product, fill volume, and operator, approximately 15 to 25 units per minute can be filled. Compact & high-quality construction - Weight: approx. 15–20 kg - Easy to place on a table - Fully made of high-grade stainless steel - Robust, industrial build quality More information For questions, feel free to email us; we are happy to assist you with this or other machines. Additionally, we also offer a labeling machine, which is an excellent combination with this filling machine for a complete filling solution. We aim to respond within 24 hours and are available on weekdays from 09:00 to 17:30.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, total width: 42 mm, total length: 101 mm, total height: 67 mm, compressed air connection: 2 bar, overall weight: 17 kg, filling weight (max.): 500 g, filling weight (min.): 50 g, input voltage: 230 V, pressure: 2 bar, tank capacity: 30 l, New Pneumatic Filling Machine / Filler – Plug & Play For sale: New filling machine suitable for precise dispensing of liquids, pastes, and semi-viscous products. Suitable applications include: - Disinfectants - Shampoos & lotions - Creams & gels - Honey & jam - Milk & yogurt - Water & alcohol - Oils & sauces (such as pesto) And many other products Gisdpfxoyfg Sce Ab Djt Reliable, simple, and efficient This machine operates entirely pneumatically and requires only compressed air. As a result, it is very low-maintenance, reliable, and immediately ready for plug & play operation. A small compressor is sufficient to operate the machine; a compressor can be supplied upon request. Flexible fill volume The filling machine is equipped with a 500 ml cylinder, allowing a maximum of 500 ml to be dispensed per stroke. - Minimum fill quantity: 50 ml - Any volume between 50 and 500 ml can be dispensed in a single stroke - Larger volumes are easily achievable by conducting multiple strokes consecutively Large hopper & expansion options The machine features a 30-liter stainless steel hopper. It can also be connected to an IBC container or 200-liter drum, allowing for swift and efficient processing of larger filling batches. Manual or automatic operation The filling machine comes with: - Foot pedal – fill at your own pace - Automatic mode – continuous filling cycle for higher throughput Depending on the product, fill volume, and operator, approximately 15 to 25 units per minute can be filled. Compact & high quality - Weight: approx. 20 kg - Easily placed on a table - Fully constructed from high-grade stainless steel - Excellent industrial build quality Interested or have questions? Do you have questions or would you like more information? Please feel free to contact us via email — we are happy to assist you. We also offer a labelling machine that combines perfectly with this filler for a complete filling line solution. We aim to respond within 24 hours and are available on weekdays from 09:00 to 17:30.

Year of construction: 2026, condition: new, 12 bottles can be washed at the same time. Gijdpfx Absff Ag Ee Dst Specifications: - 12 washing heads - automatic washing head - adjustable washing time - Suitable for bottles with 0.1 to 1.5 liters - It is possible to mix cleaning and disinfection chemicals with it - Weight: 100 kg - Electric power: 375 W, 230 V. - Material: WNr. 1.4301, AISI 304 stainless steel

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, We offer this ready-for-use Boschgraaf DL50 1500 EK 1200, year of manufacture 2020. Manufacturer: Boschgraaf Model: DL50 1500 EK 1200 Type: Boschgraaf EK 1200 DL 50 1500 Giedpfjx Rvi Aox Ab Dot Year of manufacture: 2020 Condition: ready for use If you have any questions or would like more information, please feel free to send us a message or call us. The machine has been tested and is fully operational. Very neat and solid access sluice/hygiene gate/turnstile/access control with hand and sole disinfection. Brushes are as good as new. Equipped with automatic detection for empty disinfectant and an external storage tank for sole cleaner disinfectant. Both electrically and mechanically in like-new condition. Video of operation available on request. Transport can be arranged in consultation.

Condition: used, This listing is for the Binder BF115 Incubator The unit is in full working condition and is ready for immediate use BINDER BF 115 – e Series Forced Convection Incubator The BINDER BF 115 incubator from the e series is designed for precise and gentle incubation applications in laboratories where performance, uniformity, and reliability are critical. Work particularly well under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery time. Key Performance Features Temperature Range: Ambient +8 °C to 100 °C – ideal for a wide variety of microbiological, bacteriological, and stability testing. Excellent Uniformity & Stability: ±0.3 K uniformity at 37 °C ±0.1 K fluctuation at 37 °C ±1.6 K uniformity at 100 °C Fast Heating & Recovery: Heats to 37 °C in ~8 minutes Recovers in ~3 minutes after a 30-second door opening Design & Control Highlights e™ Technology: Ensures uniform temperature distribution across all shelves – even with full chamber loads. Forced Air Convection: Enables efficient heat transfer and consistent conditions throughout the chamber. Disinfection Routine: Built-in 100 °C sterilization cycle for internal decontamination. User Interface: Intuitive LCD controller with programmable timer, USB port for data logging, and electromechanical exhaust flap control. Safety Thermostat: Class 3.1 safety (DIN 12880 compliant) with visual alarm for over-temperature protection. Internal Viewing: Transparent inner glass door allows sample observation without disturbing internal environment. Technical Specifications Feature Details Chamber Volume 114 liters Temperature Range Ambient +8 °C to 100 °C Internal Dimensions 550 × 550 × 380 mm (W×H×D) External Dimensions 710 × 725 × 605 mm (W×H×D) Power Supply 230 V, 0.4 kW, 6.3 A fuse (also available in 120 V) Noise Level 43 dB(A) typical Weight ~54 kg Shelves 2 chrome-plated shelves (up to 5 possible) Energy Consumption ~60 Wh/h @ 37 °C; ~235 Wh/h @ 100 °C Applications & Benefits Use Cases: Ideal for microbiology, bacteriology, tissue culture, stability testing, and pharmaceutical incubation. Scalable Performance: Optimized for full load conditions and large batch throughput without compromising performance. Gsdpfoxhfz Tox Ab Doit User-Friendly: Stackable, ergonomic handle design, easy-to-clean stainless steel chamber with no fixed fixtures. Highly Reliable: Rapid recovery and precise temperature regulation for reproducible results, even with frequent door openings.

Condition: used, This listing is for the Binder BF115 UL Incubator / Oven The unit is in full working condition and is ready for immediate use BINDER BF 115 UL – Forced Convection Incubator The BINDER BF 115 incubator from the e series is designed for precise and gentle incubation applications in laboratories where performance, uniformity, and reliability are critical. Work particularly well under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery time. Key Performance Features Temperature Range: Ambient +8 °C to 100 °C – ideal for a wide variety of microbiological, bacteriological, and stability testing. Excellent Uniformity & Stability: ±0.3 K uniformity at 37 °C ±0.1 K fluctuation at 37 °C ±1.6 K uniformity at 100 °C Fast Heating & Recovery: Heats to 37 °C in ~8 minutes Recovers in ~3 minutes after a 30-second door opening Design & Control Highlights e™ Technology: Ensures uniform temperature distribution across all shelves – even with full chamber loads. Forced Air Convection: Enables efficient heat transfer and consistent conditions throughout the chamber. Disinfection Routine: Built-in 100 °C sterilization cycle for internal decontamination. User Interface: Intuitive LCD controller with programmable timer, USB port for data logging, and electromechanical exhaust flap control. Safety Thermostat: Class 3.1 safety (DIN 12880 compliant) with visual alarm for over-temperature protection. Internal Viewing: Transparent inner glass door allows sample observation without disturbing internal environment. Technical Specifications Feature Details Chamber Volume 114 liters Temperature Range Ambient +8 °C to 100 °C Power Supply 120 V, 12.5 A fuse (NB At this time we also have in stock 230 V See BF115) Noise Level 43 dB(A) typical Weight ~54 kg Shelves 2 chrome-plated shelves (up to 5 possible) Applications & Benefits Use Cases: Ideal for microbiology, bacteriology, tissue culture, stability testing, and pharmaceutical incubation. Scalable Performance: Optimized for full load conditions and large batch throughput without compromising performance. Gjdpsxhfz Hjfx Ab Dsit User-Friendly: Stackable, ergonomic handle design, easy-to-clean stainless steel chamber with no fixed fixtures. Highly Reliable: Rapid recovery and precise temperature regulation for reproducible results, even with frequent door openings.

Condition: used, This listing is for a Elga Purelab Option Water Purification System with 40l Tank. The unit is in full working condition and is ready for immediate release. Optimize your laboratory's water quality with the Elga Purelab Option Water Purification System, designed to deliver high-quality Type 2 water for various laboratory applications. Key Features: Type 2 Water Purification System: Perfect for general laboratory use and feeding Type 1 water purification systems, ensuring you have reliable water quality for various experiments. 40L Storage Tank: Equipped with a spacious 40L tank, providing ample storage for your purified water needs, minimizing the need for frequent refills. Advanced UV Treatment: Features a dual-wavelength UV lamp (185/254 nm) that facilitates photo-oxidation of feed water, significantly reducing Total Organic Carbon (TOC) levels to less than 30 parts per billion (ppb)—ideal for sensitive applications. High-Quality Deionization: Utilizes a deionization cartridge to achieve resistivity levels ranging from 1 to 10 , ensuring high purity water suitable for critical lab tasks. Built-in Boost Pump: The integrated boost pump facilitates the recirculation of treated water, enhancing the system's efficiency and maintaining water quality over time. Compact and User-Friendly Design: Designed for ease of use, the system’s compact footprint makes it suitable for various lab setups without compromising space. Specifications: Water Flow Rate: Capable of delivering up to 7.5 liters per hour (LPH), ensuring a steady supply of purified water for your laboratory requirements. Resistivity Levels: Achieves resistivity ranging from 1 to 10 megohm-cm, providing high-quality water suitable for sensitive analytical applications. TOC Reduction Performance: Effectively reduces TOC levels to less than 30 ppb, critical for applications requiring ultra-pure water. UV Lamp Specifications: The dual-wavelength UV lamp (185/254 nm) not only assists in TOC reduction but also helps in the disinfection of water, enhancing its overall quality. Gsdpfx Aboxxy U Ne Djit