Used Disinfection for sale (93)

Condition: used, Year of construction: 2012, Technical Summary and Application Scope – ATES Giorgia 8000 bph The ATES Giorgia 8000 bph is a continuous-motion washing and rinsing system for glass bottles, suitable for both returnable and new bottles. It is designed for stand-alone use or seamless integration into existing or new bottling lines. Built primarily from AISI 304 stainless steel with plastic baskets and continuous-motion conveying, the machine ensures robust performance with industrial-grade safety protections. Main Technical Data Type: Industrial glass bottle washer and rinser, suitable for recycled and new bottles. Nominal output capacity: up to 8,000 bottles/hour depending on bottle format, contamination level, and line configuration. Materials: AISI 304 stainless steel structure; plastic baskets; stainless-steel doors and inspection windows. Mechanical composition: Shelves, baskets for bottle housing, and automatic loading/unloading with push bars. Easy inspection access for maintenance. Water treatment: Hot-water washing with caustic detergent (soda) followed by multi-stage rinsing. Installed electrical power: approx. 20 kW. Electrical supply: 400 V, 3-phase, 50 Hz; auxiliaries 24 V; PLC/SCADA integration (Siemens, Omron, Allen-Bradley). Water consumption: 1.0–1.5 m³/h via 1″ G (BSPP) supply, minimum 1.5 bar. Drainage: integrated rinse and tank drainage via 2″ pipeline. Compressed air: 6 bar operating pressure; approx. 20 Nl/h; 1/4″ connection. Thermal energy: approx. 250,000 kcal/h (~291 kW) via dedicated heat exchanger, compatible with steam or hot water supply; typical wash temperature around 70 °C for caustic stage. Filtration: internal filtration plus 0.2 μm microfiltration for process water. Sanitation: cleaning and sanitization stages including pre-wash and rinse, with detergent and disinfectant dosing; thermal insulation of tanks and piping for energy efficiency. System Architecture and Process Flow Returnable bottle cycle (full washing and rinsing) Automatic loading into baskets via push bars. Pre-wash spray to remove dirt and label residues. Immersion in hot caustic bath to disintegrate adhesives and organic matter. High-pressure internal and external washing through jetting manifolds. Multiple recirculating rinses followed by a final rinse with clean water or potable/demineralized water. Continuous label and debris extraction with filtration to prevent clogging. New bottle cycle (rinsing only) Spray pre-wash. Pre-treatment with detergent solution. Hfodpfxjxqmqzj Ag Ijg Internal and external washing as required. Multi-stage rinsing and transfer to filling or storage. Immersion and label management stage Pre-wash and wash for removal of labels and residues. Sequential immersion and spray jets with controlled dosing and temperature.

Condition: ready for operation (used), functionality: fully functional, Ready slaughterhouse Complete slaughter line – the system integrates specialized machines at every stage – from animal reception and stunning, through scalding and organ removal, to final cutting, cooling, and packaging. The modular design ensures scalability, allowing for expansion or configuration adjustments as production needs evolve. Thanks to advanced automation and ergonomic solutions, the line minimizes manual labor while improving operator safety and work efficiency. This turnkey solution has been designed for reliable, high-performance operation in compliance with EU regulations, making it an ideal investment for modern meat processing plants.Wydajność linii: Line capacity: 80–120 pigs per hour Scalability: thanks to independent subsystems and automation The line includes the following elements: 1. Animal Receiving and Handling Location: animal scales, Office vestibule, Livestock Separation Equipment: Animal scales – accurate weighing of livestock (capacity: up to 120 pcs/hour) Hand and apron disinfection washers – ensure staff safety 2. Stunning and Bleeding Location: Loop washer, Unit feeder, Equipment: Electric stunner for pigs Bleeding conveyor Trays for blood collection Loop washer with lowering mechanism – capacity: 100-120 pcs/h 3. Parboiling and scalding Location: Parboiling and bristling Hfjdpewu U Irofx Ag Isg Equipment: Parboiling tub Brushing machine (star) Automatic positioning system – 80-120 pcs/h 4. Preliminary Dissection and Evacuation of Organs Location: Intestine Separator, Stomach Emptying Table Equipment: Intestine and gastric cleansing lines Gastric centrifuge Blowing system – up to 120 pcs/hour 5. Dissection Proper Location: Dissection Equipment: Upper cutting line Inspector platforms Carcass conveyor Quality marking stations Aprons, disinfection equipment 6. Cooling and Separation Location: Separation cooler Equipment: Hanger system Overhead carts Palletizing and final weighing area 7. Cleaning, Waste and Packaging Location: Packaging and Waste area Equipment: Material separator Tray packer Pallet wrapper Advantages of complete pork slaughter line: Our complete pig slaughter line is designed to process up to 120 pigs per hour with optimal hygiene and efficiency. Each processing stage -from stunning to final packaging- is fully equipped with specialized machinery tailored to industry standards. The modular system allows for scalable expansion, enabling you to adapt production to your facility’s growth. Automation and ergonomic design minimize manual labor while maximizing throughput and operator safety. High-precision equipment ensures accurate weighing, clean cuts, and reliable internal organ handling. Multiple sanitation points and tool sterilization stations guarantee food safety and compliance with EU norms. This turnkey solution integrates cutting-edge technology to streamline meat processing from live animal intake to cold storage.

Year of construction: 2014, condition: excellent (used), Kohlhoff Cleancontrol SL-S/D Hygiene Station/Gate Hjdpfox I Nvkex Ag Iefg Manufacturer: Kohlhoff Model: Cleancontrol SL-S/D Machine number: 807705-10 Year of manufacture: 05/2014 Power supply: 400 V, 3 phase Power: 1.2 kW Brush length: 1100 mm Overall dimensions: 2100 × 1800 × 1800 mm Equipment: - Hygiene gate with turnstile - Sole cleaner - Hand disinfection unit The Kohlhoff Cleancontrol SL-S/D hygiene station is a comprehensive solution for personnel hygiene control in food processing facilities. The device combines sole cleaning, hand disinfection, and access control via a turnstile, effectively preventing contaminants from being carried into production areas. Its robust construction and fully automatic hygiene process ensure high cleaning and disinfection efficiency as well as easy, intuitive operation. The station is designed for intensive use in meat processing plants, food production facilities, and other environments with strict hygiene requirements.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 400 mm, area performance: 1,200 m²/h, overall weight: 22 kg, warranty duration: 12 months, tank capacity: 4 l, water tank capacity: 4 l, I am offering the innovative Aventurier Artist 1 SE cleaning device, which combines effective scrubbing and debris collection in a single pass. This is a professional machine designed for daily cleanliness maintenance where precision, convenience, and operational efficiency are essential—ideal for schools, offices, clinics, hotels, restaurants, and small commercial spaces. Hjdpfewz Nr Ejx Ag Ijfg Key features: • Rotating cleaning head – enables easy maneuvering and access to hard-to-reach areas: corners, edges, under furniture. • Compact size and ergonomic design – adjustable tilt angle allows adaptation to the operator's height, ensuring comfort even during prolonged use. • Intuitive operation – the touch control panel allows quick and easy adjustment of the operating mode to the specific task and surface type. • Versatility – effectively removes dirt from all types of hard flooring, including porcelain tiles, concrete, stone, and vinyl panels. • Quiet operation – perfect for use during opening hours and in noise-sensitive environments. Technical specifications: Theoretical performance: 1000–1200 m2/h Working width: 40 cm Brush pressure: 15 kg Vacuum pressure: 8000 Pa Brush rotation speed: 350 rpm Average water consumption: 100–140 l/m2 Tank capacity: clean water – 4 l / dirty water – 4 l Operating time: Eco mode 150 min / Turbo mode 120 min Charging time: 100 min / per battery Noise level: 60 dB (Eco mode) / 68 dB (Turbo mode) Cleaning modes: Eco/Auto/Turbo/Sterilization/Deep clean Dimensions: 110.4 x 43.9 x 34.6 cm Gross weight: 22 kg Device characteristics: • Equipped with a HEPA filter for effective filtration and disinfection. • High-resolution LCD display + intelligent voice system • Easy removal of the dirty water tank enables convenient cleaning, preventing unpleasant odors • Clean water tank with dual inlets suitable for all types of faucets • Extended battery run time – up to 2.5 hours on a single charge! • Edge cleaning system • Antibacterial body Equipment included: Battery Disc brush Squeegee blade HEPA filter LED lighting Wi-Fi

Condition: excellent (used), functionality: fully functional, Westfalia Separator AG CIP System Westfalia Separator AG CIP System | Tank, Pump, Heat Exchanger System type: CIP (Cleaning In Place) Manufacturer: Westfalia Separatoren AG / GEA Group Hsdpfxsxtvb Ue Ag Isfg A complete CIP (Cleaning In Place) installation from the renowned manufacturer Westfalia Separator AG, designed for automatic cleaning and disinfection of process lines in the food and dairy industries. The system is equipped with stainless steel tanks with heating jackets, recirculation pumps, a GEA Ecoflex plate heat exchanger, and a control cabinet. Main components of the system: 1. Stainless steel CIP tanks Brand: Westfalia Separator AG Type: CIP-TANK 3000 L (2 pcs) Serial numbers: 96/00408-1 and 96/00408-2 Year of manufacture: 1996 Capacity: (2×) 3300 liters Operating pressure: 0 bar Operating temperature: 80 °C Dimensions: (2×) 3000 × 1900 × 2300 mm 2. Stainless steel platform with stairs Dimensions: 2950 × 2200 × 2400 mm 3. Stairs Dimensions: 600 × 600 × 500 mm 4. Centrifugal pump Brand: Hilge Type: EURO-HYGIA-B-SUPER-II/60 B Number: 23/96/11349 Capacity: 30 m³/h Power: 11.0 kW Dimensions: 750 × 350 × 450 mm 5. Flow meter Brand: Endress + Hauser Model: Promag 53 Dimensions: 350 × 200 × 200 mm Accurate flow measurement for CIP media. 6. Anema centrifugal pump Dimensions: 530 × 300 × 300 mm 7. Plate heat exchanger Brand: GEA Ecoflex GmbH Type: VT20 CDS Serial number: 170/13832 Dimensions: 900 × 550 × 1500 mm High efficiency heat transfer for CIP solution preparation. 8. Control cabinet Dimensions: 670 × 220 × 800 mm Responsible for controlling and monitoring CIP system operation. 9. Stainless steel buffer tank (CIP tank) Tank dimensions: Ø 800 × 800 mm Overall dimensions: 1150 × 900 × 1770 mm 10. Anema centrifugal pump, number: 32078 Operating pressure: 12 bar Dimensions: 650 × 400 × 450 mm The Westfalia Separator AG CIP system is a comprehensive solution for cleaning process installations, providing: - high process hygiene, - monitoring of cleaning parameters (temperature, flow, time), - integration capability with dairy, food, or beverage production lines. The use of components from GEA, Hilge, Endress + Hauser, and Anema ensures reliability and long service life of the system.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 200468, overall weight: 40 kg, total length: 560 mm, total width: 480 mm, total height: 450 mm, The device is used for the isolation and purification of nucleic acid from clinical samples and not only. The system is equipped with heating and UV disinfection functions. It can simultaneously perform isolation for 24 samples. It is characterized by a short extraction time and high extraction efficiency. The extraction process is fully automated, it uses the magnetic bead method. The device consists of mechanical parts (including a vibration module, a magnetic rod module, a magnetic sleeve module and an entrance and exit door module) and electrical parts (including a control module and a heating module). Hfedpfx Ajwnny Ijg Isg

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 20161259/2017, Filling system for all liquids. The system was used to fill disinfectant bottles. The system was put into operation in 2017 and is still as good as new, having only been in operation for a few hundred hours. Hodpfx Ajvmnkreg Isfg The article produced was only sold during Corona. It is also possible to purchase the complete product. Unfortunately there are only a few photos, but we would be happy to send you a video of the system in operation.

Condition: used, mileage: 228,500 km, power: 140 kW (190.35 HP), first registration: 04/2017, fuel type: diesel, overall weight: 4,600 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, total width: 2,250 mm, total height: 2,800 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, RTW 519 WAS Case new original Mercedes AT engine / gearbox overhauled the entire vehicle is completely overhauled and looks like new 5 pieces in stock sticker on request warranty up to 36 months possible very very good condition ready for immediate use / vehicle is reconditioned no dents or scratches / stretcher possible for an extra charge / ABS + ASR, ESP / 2x airbag / electric exterior mirrors / electric windows / 2x battery 12 V 88 AH / engine preheating / auxiliary heating / power steering / stabilizer reinforced / tachograph / air conditioning / immobilizer / rear working light, outside connection 220V / fire extinguisher / center armrest / reversing camera / reading lamp / radio pre-installation / optical signaling system / beam & front flasher acoustic signaling system. Financing or installment plan possible !!! Sold without medical and technical equipment, but can be purchased separately. Our service - for you ! * 20-40 immediately available RTW always immediately available in our house * DEKRA or TÜV SIEGEL on request * FINANCIAL SERVICE - financing - leasing or installment plan can be individually tailored to your needs * WARRANTY - up to 36 months possible at extra cost * Accident replacement vehicles in stock * Reconditioning - All vehicles are professionally prepared and reconditioned for you by our team * Further vehicle offers and service points can be found under: We look forward to your call / The G&G team is at your disposal at any time. We speak Italian - English - Polish - Spanish and can certainly help you if you are looking for a good used ambulance. Hodpokktw Dsfx Ag Isfg This advertisement serves only as a preview of our vehicle and is not part of a sales contract. Information given on the Internet are non-binding descriptions and do not represent guaranteed characteristics. The seller is not liable for errors, input errors and data transmission errors. Subject to changes and prior sale! Our used special vehicles are checked, prepared and maintained by an experienced team of service technicians from the special vehicle industry, so that a TÜV or Dekra seal is as self-evident as the immediate operational readiness of all rescue vehicles. Ultrasonic disinfection of the air conditioning system in the driver and patient compartments was carried out. The vehicle is almost like new !!! We grant a warranty of 12 months on this RTW !!! can be extended to 36 months

Condition: new, capacity 90 degrees: round 500 mm capacity 90 degrees: square 420 mm 600x400 saw band length 5320x34x1,1 mm band speed 15 - 100 m/min table height 805 mm total power requirement 3,0 kW weight of the machine ca. 1,45 t dimensions of the machine ca. 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I Hedpfx Aoupxupjg Iofg • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload super fast (front loading) • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range from around 10 mm Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Year of construction: 2025, condition: new, Packaging machine for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, disinfection wipes. The production process includes folding and cutting the wipes, moistening with one or more different liquids, packaging the wet wipe in a 3-side sealed or 4-side sealed pouch. Production of up to 4 chain bags possible. Included is a dosing pump, a perforating tool, a tear notch tool, 2 character sets for cold and hot printing (14 characters each), an outfeed belt (1,2m). SIEMENS PLC and Touch-Monitor. - Specifications: Bag sizes: L(50-125)xW(50-110)mm; suitable films: PET, OPP,BOPP ,AL, PE, CPP, laminated films; suitable for dry nonwovens (airlaid, spunlaid); folds: max. 10 folds vertically and 4 folds horizontally; size of tissue, unfolded:L(40-220)xW(30-240)mm; Grammage wet wipe: 30-80g/m²; max. roll diameter: nonwoven: 1000mm, film: 350mm; filling range liquid: 0- 10ml; accuracy: +/- 0,5ml; max. speed of the machine in neutral: 110 single bags/minute (55 double bags); 5kW, 220V/380V; machine dimensions: L1000xW1500xH2000mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Hfodpfxev Nmaqj Ag Iog

Year of construction: 2025, condition: new, Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit, a flow wrap unit and a unit for applying the reclosable lid. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing and feeding to the lidding unit. The liquid supply system for moistening the wipes consists of 2 tanks with continuously mixing agitators and a liquid recycle unit. - Specifications: suitable for dry nonwovens (airlaid, spunlaid); folds: Z or C shape (change of folding tool necessary); fold face adjustable per side; dimensions of folded tissue: L(120-220)xW(90-110) mm; dimensions of unfolded tissue: L(120-220)xW(150-220) mm; number of wet wipes per pack (min. to max.): 30-120 pieces; grammage wet wipe: 40-80g/m²; speed of the machine in neutral: max. 5600 wipes/minute or max. 60 packs/minute; bag size: depending on folding dimensions and number of wipes per pack; film roll dimensions: width max. 360 mm, diameter: max. 400 mm; suitable films: OPP film (transparent, printed or laminated); nonwoven jumbo roll dimensions: width 800-1320 mm, diameter max. 1200 mm; label roll dimensions: width max. 60 mm, diameter max. 300 mm; lid dimensions: Width max. 80mm, length max. 120mm; dimensions tank for liquid: 900x900x1900mm; dimensions packing line: L16273xW5404xH2350 mm; total weight: about 12000kg; power: 27kW, 380V, 3-phase. The photo only shows the main machine (wet wipes production). Gladly we will send pictures of the packaging and lid closing unit on request. Hfodpfxjv Nma Dj Ag Iog Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: like new (used), functionality: fully functional, fuel: electricity, Year of construction: 2020, operating hours: 50 h, 100% Electric waste vacuum cleaner Aria 240Super Used machine with 240 liter collection container. Ideal for industry, residential areas, municipalities and service providers. The cleaning of public places and areas is becoming more and more complex due to higher demands on municipalities, cities and service providers. The higher standards are in place to increase the well-being of citizens, make cities more attractive for tourists and ensure safety. At the same time, the environmental impact should be reduced and resources conserved. The ARIA is a 100% electric waste vacuum cleaner for the collection of industrial and municipal waste. Cleaning with the ARIA is much more effective than with conventional manual cleaning tools, so even larger waste such as PET drinks bottles and dog excrement can be easily sucked up thanks to the boost function. With the ARIA 240 SUPER, vacuuming is also made easier with an auxiliary arm that prevents the suction hose from kinking. To prevent odors and dust, the ARIA is equipped with two spray nozzles, one at the back of the container and the other at the front of the suction pipe. Outstanding performance. Features: 120 mm suction hose with carbon suction pipe 30 liter disinfection/water tank Electric drive Hfsdpfxjrgar Ee Ag Isg Ergonomic joystick with power boost function Storage compartment for locking Four wheels of equal size to prevent tipping over on steps and uneven ground. The device can also be used on grass and off-road. 4x maintenance-free GEL batteries 1x onboard charger

Condition: excellent (used), total height: 1,600 mm, total width: 900 mm, total length: 3,800 mm, Water treatment plant Used goods, good condition, see pictures length 380 cm width 90 cm Height 160 cm consisting of: Grundfoss pump 6 m³/h at 135.1 m height, Grundfoss 6 m³/h pump at 140.2 m height, Grundfoss 6 m³/h pump at 64.4 m height, filter, UV-C disinfection unit and various controls Hedjtwzw Djpfx Ag Ijfg Negotiated price: € 2.500,-- net ex stock Goods are in stock. Transportation and installation possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 203 / 232, HIGHLIGHTS - cost-reduced ECO model - with effective and gentle HELICAL washing system - HELICAL washing system makes the machine versatile and space-saving - reduced water consumption with perfect washing results - optimal separation of foreign bodies - for example sand, stones and insects - continuous washing process - with automatic filling no operator necessary - washing, disinfection, mixing and rinsing possible in one machine Hfodpfxonl Dzxe Ag Isg - usable for e.g. lettuce, vegetables, herbs and fruit, both for cut and whole products - ideal accessibility for cleaning and maintenance TECHNICAL DETAILS capacity: 1800 kg/h inlet height: 1103 mm Outlet height: 771 mm Water tank: 785 l Water outlet: 2 x 2". Fresh water connection: 2 x 3/4 inch (GEKA coupling) MACHINE DETAILS power: 5,7 kW voltage: 3 ~ 400 V; N/PE dimensions: 3807 x 991 x 1500 mm weight: 583 kg

Condition: used, mileage: 244,000 km, power: 140 kW (190.35 HP), first registration: 08/2017, fuel type: diesel, overall weight: 4,800 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, RTW 519 WAS case new original Mercedes AT engine/gearbox overhauled the entire vehicle has been completely overhauled 8 units in stock (as of stickers on request incl. Stryker Power Load stretcher mount pneumatic siren (compressed air) air suspension at the rear guarantee up to 36 months possible very very good condition, ready for immediate use / vehicle is reconditioned, no dents or scratches / stretcher available for an additional charge / ABS + ASR, ESP / 2x airbag / electric outside mirrors / electric windows / 2x battery 12 V 88 AH / engine preheating / auxiliary heating / power steering / reinforced stabilizer / tachograph / air conditioning / immobilizer / work light at the rear, external connection 220V / fire extinguisher / center armrest / reversing camera / reading lamp / radio pre-installation / optical signaling system / bar & front flasher acoustic signaling system. Financing or hire purchase possible!!! Our used vehicles Special vehicles are checked, prepared and maintained by an experienced team of service technicians from the special vehicle industry, so that a TÜV or Dekra seal is as natural as the immediate operational readiness of all ambulances. Hfjdpfjlb Nw Tox Ag Iog Ultrasonic disinfection of the air conditioning in the driver and patient compartments was carried out. Vehicle is almost as good as new!!! We offer a 12-month guarantee on this ambulance!!! Can be extended to 36 months Sold without medical and technical equipment, but can be purchased separately. Our service - for you! * 20-40 immediately available ambulances always available immediately in our house * DEKRA or TÜV SEAL on request * FINANCIAL SERVICE - Financing - leasing or hire purchase can be individually tailored to your needs * GUARANTEE - up to 36 months possible for an additional charge * Accident replacement vehicles in stock * PREPARATION - All vehicles are professionally prepared and prepared for you by our team * You can find further vehicle offers and service points at: We look forward to your call / The G&G team is available to you at any time. We speak Italian - English - Polish - Spanish and can definitely help you if you are looking for a good used ambulance. This advertisement is only a preview of our vehicle and is not part of a purchase contract. Information provided on the Internet is non-binding descriptions and does not represent guaranteed properties. The seller is not liable for errors, input errors and data transmission errors. Subject to changes and prior sale!

Year of construction: 2016, condition: like new (used), functionality: fully functional, Thermo Scientific CO2 Incubator BBD 6220. Internal volume: 220 L. Stainless steel interior. Foil control panel with digital display. Temperature safety control. H2O level indicator. Disinfection routine: 180°C/3h. Ambient temperature range: +5°C to +50°C. CO2 range: 0-20%. Humidity: 60-95% rH. Maximum load per shelf: 5 kg. Maximum total load: 30 kg. Internal dimensions (HxWxD): 67x60x50 cm, divided into 6 compartments. External dimensions (HxWxD): 85x95x95 cm. 230V. 50/60Hz. 1.2 kW. Unused. Tested, including functional guarantee. Hfjdowurbpjpfx Ag Ijg

Condition: new, Year of construction: 2025, Sample filling system of a disinfection liquid bottle filling line for smaller bottles with a filling volume of up to 100ml. The fully automatic filling process includes: Aligning and feeding of the bottles; filling with 2 to 8 filling heads and with high accuracy by anti-drip device; automatic alignment, feeding and capping of the lids / spray caps, single or double sided labeling of the bottles; outfeed and collection of the bottles to a collection table or to the next production station. -Specifications: number of filling nozzles: 4 (can be customized for a surcharge); number of heads for lid positioning and capping: 1, each (can be customized for a surcharge); filling range: 30-100ml; dosing method: by piston pump; accuracy: +/- 1%; speed: max. 2000 bottles/hour, at 100ml max. 500 bottles/hour; label size: L10-350mm, W10-200mm; product contact parts are made from corrosion-resistant AISI 316 stainless steel, plastic/rubber parts are food grade. Dimensions and total weight of the line depend on the actual layout. Please note: This is only an example system. Final specifications may vary. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Hedpfxjv Nlbge Ag Ijfg

Condition: new, Year of construction: 2025, Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit and a flow wrap unit. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing. The liquid supply system for moistening the wipes consists of 2 tanks with continuously mixing agitators and a liquid recycle unit. - Specifications: suitable for dry nonwovens (airlaid, spunlaid); folds: Z or C shape (change of folding tool necessary); fold face adjustable per side; dimensions of folded tissue: L(120-220)xW(90-110) mm; dimensions of unfolded tissue: L(120-220)xW(150-220) mm; number of wet wipes per pack (min. to max.): 30-120 pieces; grammage wet wipe: 40-80g/m²; speed of the machine in neutral: max. 5600 wipes/minute or max. 60 packs/minute; bag size: depending on folding dimensions and number of wipes per pack; film roll dimensions: width max. 360 mm, diameter: max. 400 mm; suitable films: OPP film (transparent, printed or laminated); nonwoven jumbo roll dimensions: width 800-1320 mm, diameter max. 1200 mm; label roll dimensions: width max. 60 mm, diameter max. 300 mm; dimensions tank for liquid: 900x900x1900mm; dimensions packing line: L13998xW5404xH2350 mm; total weight: about 10600kg; power: 19kW, 380V, 3-phase. The photo only shows the main machine (wet wipes production). Gladly we will send pictures of the flow wrap packaging and lid closing unit on request. Hjdpfx Agev Nmawo Isfg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.