Used Dilr 40 for sale (56,541)

Condition: as good as new (ex-display), Collet chuck SK 40, DIN 69871/OZ32 Dcjdpfx Abslrt S No Tor Collet type OZ32 467 E total length 190 mm parts are unused in opened original packing price per piece 12 pieces available weight per piece 2 kg

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, empty load weight: 8,500 kg, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Dcodpfow U Dt Njx Ab Tor Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), For sale: SK40 holders, tool holders, milling heads, drill chucks, and cutting tools. Condition: used, in good technical condition. Offered brands: Haimer, Wohlhaupter, Schunk, Sandvik, Iscar, Garant, Fahrion, Gewefa, WTE, Kelch, WNT, Atorn, Bahmüller, Eroglu, Holex, LLambrich, Weldon, i-tec, Zurn Germany. Available: drill chucks, face milling heads, coolant-fed holders, and many more. 🛠️ Some with cutters, drills, turning tools. Price given per holder from photos 1-2, Haimer 60€/pc. Dcjdow Hl Sxspfx Ab Tjr

Condition: excellent (used), Year of construction: 2001, For sale are operational and very well-maintained dual-fuel oil/gas burners of the brand Weishaupt RGL40/1-B (2550 kW), including gas valve Dungs DN 65, year of manufacture 2001, with control cabinet. Dcjdpfx Ajwgk Raob Tjr

Condition: excellent (used), Year of construction: 2012, Meyn Deboner Type: D40 Deboner type: poultry thighs and drumsticks Performance: up to 2400 pieces per hour depending on application Dimensions: 1500x1300x2000 Weight: 500 kg Year : 2012 Dcedpoqwguyefx Ab Tsr We encourage a personal inspection, where you can assess the machine on-site, evaluate its performance, and confirm its high quality Preview Video

Condition: used, Year of construction: 2008, Cinch Mill 40 milling center ( L et W Machine Tools , Taiwan ) Year 2008 Fagor control X Y Z 1700x820x700 Spindle 6000 rpm Spindle taper BT40 Magazine 24 tools Dcodpsvwg Tmofx Ab Tsr

Condition: excellent (used), Year of construction: 2008, GRASSAIR RLR 40 8B Screw Compressor Atlas Copco screw module Technical specifications: Capacity: 5.30 m³/min (5,300 L/min); Motor power: 30 kW; Max pressure: 8 bar; Operating hours: 12,847 h; Year: 2008; Compressor is fully operational. Net price: 12,200 PLN Gross price: 15,006 PLN Dodpfxow Niprs Ab Tecr Link to video below.

Condition: used, various tool holders from , mazak, sandvik, mimatic, gerardi, ews, nikken and others. turning-milling tools with the VDI 40 holder only for sale per pallet pallet5 euro 2730 total 3x driven tools vdi 40 euro 580/pc Dcedpevry T Nefx Ab Tjr 11x tool holder vdi 40 euro 90/pc pallet 6 euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 7 euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 8 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc

Condition: used, -KOM 3100- Offered here is a lot of VDI 40 tool holders. The lot consists of 12 items in total. Contents: Dcedpfxswuq E Hj Ab Ter - 1x VDI 40 tool holder + internal turning tool from 50 mm diameter - 1x VDI 40 tool holder + internal turning tool from 19 mm diameter - 1x VDI 40 tool holder + internal turning tool from 15 mm diameter - 1x VDI 40 tool holder + internal turning tool from 10 mm diameter - 1x VDI 40 tool holder + drill bit from 16 mm diameter - 1x VDI 40 tool holder + axial parting tool - 1x VDI 40 tool holder + rear turning tool from 47 mm diameter - 1x VDI 40 tool holder + rear turning tool from 40 mm diameter - 1x VDI 40 special tool holder - 2x VDI 40 tool holders - 1x VDI 40 plug

Condition: excellent (used), Weishaupt RGMS 40 dual fuel burner gas+heavy oil. 2600w Dedjmnqbtspfx Ab Tjcr

Condition: excellent (used), 40 running meters pallet rack Stow Used, very good condition, see pictures height 4 m depth 100 cm beam length 2,70 m Load / compartment 3000 kg Frame blue Carrier orange Negotiable price: € 2.570,-- net ex stock Offer consists of: + 14 pcs. frames pre-assembled, 12t field load, depth 100 cm, height 4 m + 52 pcs. beams, length 2,7 m, 3000 kg payload/slot + 108 pcs. suspension locks + 56 pcs. concrete anchors Load plate Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. Dsdpfxjiwlpfs Ab Tjcr (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: used, -KOM 3099- CNC lathe VDI 40 tool holder set A set of VDI 40 tool holders consisting of 10 pieces is offered here. Contents: - 1x VDI 40 holder + internal turning tool from 50 mm diameter - 1x VDI 40 holder + internal turning tool from 23 mm diameter - 1x VDI 40 holder + internal turning tool from 16 mm diameter - 1x VDI 40 holder + drill 38 mm diameter - 1x VDI 40 holder + back turning tool from 47 mm diameter - 1x VDI 40 holder + axial parting-off tool - 3x VDI 40 holder - 1x VDI 40 plug Dcjdpfx Aewuq A Ejb Tjr Weight: 30kg

Condition: like new (used), 40 running meters pallet rack Nedcon New goods, see pictures! A top racking system of the major manufacturer NEDCON- this is a subsidiary of Voestalpine AG with headquarters in Holland. Height 5,5 m Depth 110 cm, blue beam length 2,7 m orange girder with load /shelf 3050 kg Negotiable price: € 6.290,-- net ex stock Offer consists of: + 15 pcs. frames pre-assembled, depth 110 cm, height 5,5 m + 84 pcs. beams, length 2,7 m, 3050 kg payload/shelf +168 pcs. suspension locks + 30 pcs. Concrete anchor Dedpfxofkgpwj Ab Tocr Load plates documents etc. are self-evident. Further accessories can be found in the accessories catalog. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Bay load 12 tons, higher bay loads available on request. Beams orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and assembly possible on request. Other composition on request. Over 2000 meters available. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast - flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: reconditioned (used), functionality: fully functional, LVD 4000 x 200T Press Brake Dsdowtmi Eopfx Ab Tocr Type PPBL 200/40 Capacity 4000 x 200T Maximum stroke 150 mm Weight 13.5T With mobile blade rack

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 2134 x 1016 x 762mm, Table 2134 x 914mm, table load 1814 kgs, Spindle Speed 7500 rpm, Dcjdpfx Abex D Ulme Tor Spindle taper BT40, Spindle Motor 30Hp, HAAS Control, 24 Station ATC, coolant, low volt light, swarf auger,

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 5850 kg Control Unit Brand ENGEL Model n/a Injection Unit Screw diameter 18 mm Stroke volume 25 cm³ Injection pressure 2200 bar Dedpox D Nm Ejfx Ab Tjcr Plasticising rate max 36 cm³/s Screw speed 450 r/min Nozzle pressure 28.3 kN Clamping Unit Clamping force 400 kN Opening stroke 338 mm Ejector force for / back 20.1 kN Media Pump drive power 15 kW This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, it's ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: like new (used), Year of construction: 2024, Used machine UNO 20/40 Premium Machine type: Tool presetter Model: UNO20/40 Premium Manufacturer: Haimer Year of manufacture: 2024 Location: Germany - "Premium technology" package - Bidirectional interface – Toolbase - "Premium turning" package - HQR-Connect - Thermal label printer Dedex Dr U Sopfx Ab Tjcr - Direct photo storage - System cabinet - Various tool holders (Errors and omissions in technical specifications and information excepted)

Condition: used, machine/vehicle number: 005521, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Dodpfx Ajvctlgsb Tecr Total number of drilling spindles: 30 Total number of tool changer positions: 24

Condition: like new (used), Year of construction: 2007, Retrofitted: 2024 Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): -10 / 990 mmDistance between columns: 2435 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50Speed range: 6000 rpmSpindle power: 30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 45300 KgMachine dimensions approximate: 10975 x 4768 x 5095 mm Accesories GuardingAutomatic tool changer: ATC30Coolant: External internal high pressure through spindleElectronic handwheel: HR-410 Sales conditions Guarantee: 6 months mechanical spare partsSale price (Ex Work): On request View all technical features Djdougbn Eopfx Ab Tscr

Condition: ready for operation (used), Year of construction: 2017, operating hours: 19,843 h, Control Unit Brand HAAS Main Drive Number of spindles 1 Spindle speed range 10000 rpm Spindle motor power 224 kW Tool taper CT40 Number of axis 3 Movement X-Axis Movement 2134 mm X-Axis Rapid Traverse 152 m/min Y-Axis Movement 1016 mm Y-Axis Rapid Traverse 152 m/min Z-Axis Movement 762 mm Z-Axis Rapid Traverse 152 m/min Dedpsx D R Tmefx Ab Tscr Additional Equipment Ethernet Media Display Synchronized Thread Cutting without Head for Compensation Cooling: ✓ Renishaw Tool Calibration Screw Chip Conveyor TAB-Air Cooling Through Tool HSM-High-Speed Machining Automatic Air Gun Directed at Tool Programmable Coolant Nozzle: Automatically directs spray Coolant Tool This 3-axis HAAS Vf-9/40 vertical machining center was manufactured in 2017. It offers robust capabilities for precision machining. Consider the opportunity to buy this HAAS Vf-9/40 vertical machining center. Contact us for more information. Application Types Milling

Condition: used, machine/vehicle number: 007997, Max. panel width: 910 mm Dsdpfjwu Ag Aex Ab Tecr Max. panel length: 2180 mm Movement system: suction cups.

Condition: ready for operation (used), Year of construction: 2001, Control Unit Model Automation Brand HAAS Main Drive Number of axis 4 Movement X-Axis Movement 1300 mm Y-Axis Movement 550 mm Z-Axis Movement 710 mm Additional Equipment Two coolant pumps: external cooling and internal cooling through the spindle Rotary table for use on the A-axis Renishaw measuring system (without touch probe) Dcjdpox D Rpzofx Ab Tjr This 4-axis MIKRON VCE 1300/40 was manufactured in 2001. It features a large travel range with X = 1300 mm, Y = 550 mm, and Z = 710 mm, and a tool magazine that holds 32 tools with an SK40 chuck. Equipped with a Haas Rotary Table and Renishaw measuring system, it's ideal for precise machining tasks. Consider the opportunity to buy this MIKRON VCE 1300/40 vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, machine/vehicle number: 007350, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Dsdpfxowcyd Is Ab Tocr Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 28

Year of construction: 2016, condition: ready for operation (used), This 4-axis HOMAG PROFI BMG 512/40/12/V/A was manufactured in 2016, featuring a POWEREDGE gluing unit and a 4-fold edge magazine. It includes an 18-fold disc tool-changer, a 12 kW processing spindle, and a C-axis with unlimited swivel range. The machine supports workpiece lengths up to 4000 mm and thicknesses up to 300 mm. Ideal for advanced woodworking, it offers dynamic space allocation for optimal processing area utilization. Contact us for more information about this machine. Application Types Dcodpfx Ajx D Nzveb Tsr CNC Wood Machining

Year of construction: 2005, operating hours: 60,000 h, condition: ready for operation (used), Main Drive Number of axis 4 Additional Equipment Hydraulic clamping Easy Form angle measuring system Dcjdsx D Hmpspfx Ab Tsr No tools required This 4-axis LVD PPEB 220/40 press brake was manufactured in 2005. It features hydraulic clamping and the Easy Form angle measuring system for enhanced precision. Ideal for those looking to enhance their metal forming capabilities. Contact us for more information about this machine. Application Types Bending