Used Dilr 40 for sale (21,421)

Condition: excellent (used), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without heat load): 10...85°C Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min Temporal temperature deviation during climatic operation: ± 1.0... ± 1.5 K/min Change rates Heating: avg. 2.0 K/min Cooling: avg. 2.0 K/min Standard IEC 1646 is achievable with testing, solar modules up to max. 160kg weight and nonlinear ramps (setpoint jump) Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95 % r.h. Temporal humidity deviation: ≤ ± 3.0... ±5.0 % r.h. Dew point range: 8...80.9°C Test Chamber Test chamber volume: 7.0 m³ Dimensions Internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Swing door DIN right, heated, Width 900 mm x Height 2100 mm Observation window, heated, with blackout shutter and lockable: Width 500 mm x Height 600 mm Feedthrough: 2x, right front side, Ø 75 mm Irradiation unit, test chamber Opening: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area when using SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system: Bitzer compressor, semi-hermetic, 2-stage, air cooled Condenser: split condenser (outdoor installation, winter control) Refrigerant: R507 / R23 Temperature control system Coolant medium Tyfocor / water Mixing ratio 50/50% Coolant density: 1.072 kg/dm³ Filling quantity: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply, test chamber Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power demand: approx. 32.0 kW Supply fuse: 3 x 63, Char C (A) Power supply, SolarConstant Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: Bwsdpozd Sdgofx Afmop Max. simultaneous power demand: approx. 30.0 kW Supply fuse: 3 x 63, Char C (A) Overall external dimensions of the test cell including: equipment room/control cabinet and control cabinet for SolarConstant 2500 External dimensions equipment room: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber (total): approx. 2700 kg Condenser empty weight: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Climate Chamber, Climate Testing Cell Here we offer a CTS climate chamber, climate testing cell. Available from mid-January 2023! Water-cooled Height adjustable! Footprint approx. (W x D x H): 3755 x 3470 x 2480 Test chamber approx. (W x D x H): 2500 x 2720 x 2200 Test chamber volume: approx. 15 m³ Temperature range: -40°C to +140°C Temperature deviation 1 K over time Average temperature change rate without heat radiation, measured in the supply air Heating: 2 K/min Cooling: 1 K/min from +110 °C to -35 °C Climate tests: Temperature range: +10 °C to +90 °C Humidity range: +30% to +95% RH in the dew point range: +5°C to 89°C Temperature deviation 0.5 K over time Humidity deviation ±1 to ±3% RH over time Rated voltage: 400V 3/N, PE, 50 Hz Rated power: 53.5 KW Rated current: 92.3 A Compressor: S6J-16.2 + Chilled water unit Bodpfxjzd R A Ue Afmjwp Refrigerant: R404A Weight: 5500 kg Type: CW-40/16 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), RS Simulators Type: KKM 110/45 Manufacturer: RS-Simulatoren, water-cooled Climate chamber 110m³ incl. condenser The KKM 110/45 type belongs to the TKM/KKM modular design of RS-Simulatoren, meaning it is a climate chamber with a modular structure that is assembled on-site. This design offers: Modularity: Individual segments are pre-assembled and installed at the customer's location. This makes retrofitting (more depth or additional modules) as well as later relocation straightforward. Technical data climate chamber: Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Type: KKM 110/45 External dimensions: 6200 x 9400 x 3400 (W x D x H in mm) incl. technical attachments Internal dimensions: 5900 x 7000 x 2960 (W x D x H in mm) Chamber door (double-leaf) 3600 x 2930 (W x H in mm) Personnel door (single-leaf) on side wall 1880 x 900 (H x W in mm) Feedthroughs: 8 x Ø120mm (4x left & 4x right) Windows: 1x (460 x 550mm) in the front chamber door, heated 1x (1260 x 1000mm) in the left side wall, heated Temperature range: -40°C to +120°C Time deviation: ± 0.8K – 1.5K according to DIN 50011 in an empty test chamber Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerant: 2x R404A 52kg 2x R23 17kg Bjdpfx Ajwwg Uvjfmswp Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Max. surface load 500kg / m² Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerants 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will gladly answer any further questions you may have on the phone.

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Quick-change system Bwsdpfx Afozg Tghemsp Digital backgauge system x-axis 0 – 1500 mm left y-axis 0 – 750 mm Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.

Condition: used, empty load weight: 7,396 kg, maximum load weight: 31,604 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 06/2014, next inspection (TÜV): 06/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 97 m³, total length: 13,620 mm, suspension: air, tire size: 455/40 22,5, tire condition: 50 %, color: white, Year of construction: 2014, front tire size: 455/40 22,5, rear tire size: 455/40 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, and errors. You can find more pictures and videos on our website. Bsdpfx Ajzg Tfdefmowp Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and easy financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, empty load weight: 5,190 kg, maximum load weight: 35,810 kg, overall weight: 41,000 kg, axle configuration: > 3 axles, first registration: 03/2019, suspension: air, tire size: 385/55 22,5, wheelbase: 1,310 mm, color: black, Year of construction: 2019, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Vehicle number for inquiries: 1122442211 Krone, SDC 27 Highcube * Year of manufacture: 2019 * ABS, Anti-lock Braking System * EBS, electronic braking system Bsdozg Td Tjpfx Afmowp * Air suspension * Lift axle * Air connection, coupling head (red + yellow) * Connection plug, 2x7-pin * Connection plug, 15-pin * Lifting and lowering device * Suspension: Air * Gross vehicle weight: 41,000 kg * Tare weight: 5,190 kg * Payload: 35,810 kg * Permissible gross vehicle weight: 41,000 kg * Axle manufacturer: SAF * Tire condition, 1st axle: -- - Tire size: 385/55 R22.5 * Tire condition, 2nd axle: -- - Tire size: 385/55 R22.5 * Tire condition, 3rd axle: -- - Tire size: 385/55 R22.5 * Wheelbase: 1310 mm * Tire size: 385/55 R22.5 * Krone SDC 27 eLTU5-2 * Height-adjustable locking mechanism * High Cube container * Additional release valve for releasing the brake * Container fittings: 1 x 40' container with tunnel, 1 x 45' container with tunnel * 2 x 20' containers * 1 x 20' container, rear aligned * 1 x 20' container, centered * Tire pressure monitoring system * Year of manufacture: 2 x 2019 and 1 x 2018 * Package price for chassis loaded: EUR 30,000 * Individual price: EUR 10,800 Disclaimer: Subject to changes, prior sale, and errors. More images and videos can be found on our website. Our extensive services include: * Purchase / Sale / Rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, functionality: fully functional, Radial Drilling Machine WRA 40 x 1250 – used For sale: radial drilling machine WRA 40 x 1250 in good working condition. The machine is fully functional, connected to power and available for inspection under power. 🔧 Condition used (not overhauled) fully operational ready for testing inspection possible ⚙️ Technical data Drilling capacity steel/cast iron: 40 / 50 mm Arm reach: 250 – 1220 mm Spindle distance: 380 – 1580 mm Spindle stroke: 355 mm Spindle taper: MT4 Speed range: 20 – 2500 rpm Number of speeds: 15 Feed range: 0.063 – 2.5 mm/rev Motor power: 4 kW Bsdpsyy Rcpefx Afmewp Machine weight: approx. 3600 kg 🧰 Equipment coolant system 24V lighting drilling table Morse sleeves tools and documentation 📦 Terms price: on request location: Poland loading possible transport can be arranged

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei Bwedowiq N Iopfx Afmep 12900 € 247.68 € 40 to 285 mm 200x24 mm 660x1250 mm 250 mm 80 mm 10 mm/s 10 mm/s 4 kW 930 mm 1250 mm 650 mm 1250 mm 1100 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: excellent (used), x-travel 600 mm Bodpfx Aozd Hg Ajfmowp y-travel 400 mm z-travel 400 mm Control HEIDENHAIN spindle turning speed - stepless 63 - 3150 U/min quill stroke 100 mm tool taper SK 40 table surface area 630 x 400 mm total power requirement 8,5 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,5 x 1,8 x 2,0 m Electric handwheel

Condition: excellent (used), Vötsch VC 4034 Climate Chamber / Temperature Chamber Description: For sale is a used climate and temperature chamber from the manufacturer Vötsch Industrietechnik. This unit is suitable for demanding temperature and climate tests in research, development, quality assurance, the electronics industry, automotive technology, as well as material and aging tests. The test chamber has been converted to the modern refrigerant R452A and features a user-friendly touch panel control. Thanks to the large test chamber volume of approximately 335 liters, the system is suitable for both individual test specimens and for extensive test setups. Bwodezd Dm Hjpfx Afmjp Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4034 Test chamber volume: approx. 335 liters Test chamber dimensions: approx. 580 x 765 x 750 mm (W x D x H) External dimensions: approx. 780 x 1758 x 1800 mm (W x D x H) Weight: approx. 515 kg Temperature range: -40 °C to +180 °C Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±1.5 K Heating rate: approx. 3.2 K/min Cooling rate: approx. 3.5 K/min Climate operation: Temperature range: -40 °C to +180 °C Humidity range: 10 % to 98 % RH Temperature deviation over time: ±0.1 to ±0.3 K Temperature homogeneity spatially: ±0.5 to ±1.0 K Refrigerant: R452A Filling quantity: 2.5 kg GWP: 2141 CO₂ equivalent: 5.35 t ND max.: 22 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.1 kW Rated current: 12.5 A Equipment: Touch panel control Programmable test sequences Stainless steel interior Viewing window in the door Test chamber lighting Air circulation system Side feedthrough for measuring cables Several stainless steel insert shelves Air-cooled refrigeration system Documentation available Application areas: Temperature testing Climate testing Material testing Electronics testing Aging tests Environmental simulation Quality assurance Research and development Automotive testing Condition: Used Optical condition as shown in the pictures. Maintenance and calibration stickers are present. Refrigeration circuit converted to R452A. Scope of supply: 1x Vötsch VC 4034 Climate Chamber Stainless steel insert shelves Touch panel control unit Documentation / Documents Accessories as shown in the pictures Subject to changes and errors in the technical data. Subject to prior sale.

Condition: used, Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Cone CM3 Spindle exit: 120 mm Bjdpjzg H H Usfx Afmewp Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm 2 speeds motor Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Weight: approx 350 KG

Condition: excellent (used), Year of construction: 1969, BHU 40/1500 TOS Hostivar Cylindrical Grinder Grinding diameter 400 mm Bwedozg H E Repfx Afmep Grinding length 1500 mm Maximum workpiece weight 300 kg Grinding wheel: 600 x 150 mm Longitudinal travel of the table (x-axis): 1 – 1790 mm Grinding head swivels +/- 45° Table swivels +/- 5° Spindle taper: Morse 5 Maximum rotational speed of the grinding wheel spindle: 1240 rpm / 2100 rpm Total power consumption: 22 kVA Machine weight: approx. 7000 kg Cooling system: none Accessories: none

Condition: good (used), Year of construction: 2008, pressing force: 300 t, control type: CNC control, actuation type: hydraulic, CNC crowning Hydraulic tool clamping EFL Easy Form laser measuring & correction system Set tooling Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between supports: 3150mm Bodpfxowrza Ae Afmewp Max. pressing force: 320T Distance table mount: 570mm Max. stroke: 300mm Table width: 200mm Support throat: 400mm Descent speed: 120mm/min Working speed: 14mm/min Return speed: 130mm/min X-axis range: 1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg

Condition: used, Year of construction: 2016, Industrial robot Bwedpozdz Rpjfx Afmsp Manufacturer: ABB Type: IRB 4600-40/2.55 Year of manufacture: 2016 Payload: 40 kg 4 units available! 24626

Condition: used, functionality: fully functional, Clamping fixture for SK 40 tools The metal plate reads: Lorenz Ettlingen 7-191-020-0001 For securely clamping tool holders with SK40 during tool changes – tool mounting. For example, as an accessory for the Lorenz gear hobbing machine – impact machine. Clamping vice / clamping table / clamping cube. Bwjdpfxeyuwzmo Afmsp Clamping device for secure fixing and mounting. Clamping tower – tool changing device. Suitable for the 4 pieces of SK 40 tool holders. Weight 75 kg Dimensions 80 x 60 x 60 Price: negotiable Our asking price is €250 net, ex works, plus packaging costs. All technical specifications are subject to typographical errors and errors. We only sell to countries within the European Community.

Condition: excellent (used), Year of construction: 2007, Used CNC machining center Manufacturer: Homag Type: BOF 311/40/F/K Year of manufacture: 2007 Special features: 5-axis spindle with 15 kW "Drive 5+" (incl. vibration sensor) Workpiece thickness 300 mm incl. clamping device WoodWop 8.0 incl. Windows 7 computer 5-axis CNC cross-support machine; Cantilever table with 8 adjustable consoles, each with 2 suction cups, side and longitudinal stop bolts, LED position display for vacuum suction cups 6 sets of extraction rails, connection for Power-Clamp, vacuum connection for templates WORKPIECE PARAMETERS: – Maximum workpiece length: All units individually 4000 mm, pendulum max. 1550 (1375) mm Workpiece diameter 25 mm: individually 3475 mm, pendulum max. 1915 mm -Workpiece width: stop at the front: 1450 mm for all units / 1525 mm with workpiece diameter 25 mm Stop at the rear: up to 1600 mm / 1730 mm – Workpiece thickness: – Max. 300 mm including clamping device – Up to max. 60 mm with standard clamping device SAFETY AND PROTECTION DEVICES: EC compliant; SAFETY GUARD ON THE RIGHT WITH DOOR Left and rear: wall installation! Bsdpozdydzofx Afmowp Support equipment: 15 kW Drive5+ spindle and 30-position tool changer (chain) up to 24,000 rpm, vibration sensor Pick-up location for saw blade 350mm diameter Drilling head with 25 spindles (V19/H6/S0/90°) AGGREGATE INTERFACE DRIVE5+ Chip conveyor belt TOOL TRANSFER LOCATION COOLANT TANK FOR MACHINING SPINDLE VACUUM PUMP 140 M3/H Control system: POWERCONTROL PC85 with PLC CONTROL SYSTEM; WoodWop Version 8.0 WOODWOP-CAD/CAM INTERFACE STANDARD DOCUMENTATION AND CONTROL SYSTEM TEXTS: GERMAN Delivery includes only the tools and HSK tool holders shown in the pictures!

Condition: like new (used), Year of construction: 2007, Retrofitted: 2026 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): 240 / 1240 mmDistance between columns: 2500 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 35500 KgMachine dimensions approximate: 10975 x 4770 x 5345 mm Accessories Guarding: 2 slidings doors and new perimetral wire-mesh fenceAutomatic tool changer: ATC-60 (sale option with no ATC)Chip conveyor: 1 transversalElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sale conditions Warranty: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features Bedpfxsyf Rrto Afmewp

Condition: used, mileage: 122,619 km, power: 309 kW (420.12 HP), first registration: 02/2020, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, color: black, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, soot filter, MAN 26.420 TGS Betonstar concrete pump 6x4 Suspension: leaf-leaf Wheelbase: 4.80 m BETONSTAR Type: BST 40.16-5RZ 5-section articulated boom Operating hours: 775 h 1x remote control Bwodpfx Aeyw A Tusfmop Equipment: - digital tachograph - engine brake - radio-media - multifunction steering wheel - electric windows - sun visor - lane departure warning system We are happy to assist you with financing/leasing through our partners. All information without guarantee. Subject to error and prior sale.

Year of construction: 1992, condition: used, Pressing force 40 t Bwsdpfx Aezdvcajfmop Effective stroke 500 mm power capacity 17 kW tracking travel 48 mm Overrun time 110 ms safety distance 176 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2001, functionality: fully functional, Description Minimum format: 10 x 15 cm Bwodozgx N Ijpfx Afmsp Maximum format: 4 x 84 cm Flat-pile feeder, diameter 40 and DCT control 4 folding stations, 40 cm, with noise reduction Delivery 1 printing vacuum compressor, soundproofed

Condition: used, TECHNICAL DETAILS - distance between centers : 1000 [mm] - centers height : 175 [mm] - strokes (Z/X) : 1050 x 275 [mm] - max. feeds (Z/X) : 10 x 5 [m/min] - grinding wheelhead type : 2 external, 1 internal - left external grinding wheel dimension : 500 x 63 x 127 [mm] - right grinding wheel dimension : 400 x 63 x 127 [mm] - grinding wheel motor power : 7,5 [kW] - rotation speed : 1670 - 2110 [Rpm] - grinding wheelhead orientation : -15 to +225 [°] Bwjdpfxeuhbyqj Afmep - resolution : 0.001 [°] - workhead tapper : MT5 - workhead rotation speed : 1 - 1027 [Rpm] - workhead power : 0,785 [kW] - tail stock : MT3 - quill stroke : 35 [mm] - weight : 7000 [kg] - hours under power : 47.959 [h] EQUIPMENT - control CNC FANUC 16 TB - programming through Pictogramming - Release B version B275 - deported electronic handwheel - 2 grinding wheels left-right internal at 180 [°] - B axis for indexing of the grinding wheelhead every 0,001 [°] - high precision C axis for part indexing and form grinding - tail stock with fine concentricity adjustment - sensitron - upper table swiveling fine adjustment - control pedal - lenght positioning device MARPOSS E32R with sensor T25G - measuring scales HEIDENHAIN on X/Z - coolant tank with pump - 1 grinding wheel holder flange - 1 grinding wheel - 1 dry center - 1 electro-spindle : 40.000 [Rpm] - tail stock hydraulic retract through pedal

Condition: used, TECHNICAL DETAILS - Bar diameter : 40 [mm] - Bar length : 4200 [mm] - Max. scrap length : 150 [mm] - Loading time : 22 [sec] POWER SUPPLY - Supply voltage : 400 [V] Bwsdpfeykb Uvex Afmjp

Condition: used, TECHNICAL DETAILS Bjdpowpl Aisfx Afmowp - Bar diameter : 3-20 [mm] - Bar length : 4000 [mm]

Condition: used, TECHNICAL DETAILS - Quantity of spindles : 6 - Bar clearance : 40 [mm] - Rotation speed : 7 000 [rpm] - Spindle power : 13 / 24 [kW] NUMERICAL AXES : 27 - Slides unit 1.1 : axes X and Z CNC-controlled - Slides unit 1.2 : axes X and Z CNC-controlled - Slides unit 2.1 : axes X and Z CNC-controlled - Slides unit 2.2 : axes X and Z CNC-controlled - Slides unit 3.1 : axes X and Z CNC-controlled - Slides unit 3.2 : axis Z CNC-controlled - Slides unit 4.1 : axes X and Z CNC-controlled - Slides unit 4.2 : axis Z CNC-controlled - Slides unit 5.1 : axes X and Z CNC-controlled - Slides unit 5.2 : axis Z CNC-controlled - Slides unit 6.1 : axis Z CNC-controlled + SCARA axis - Slides unit 6.2 : axes X and Z CNC-controlled - Slides unit 6.3 : axis X CNC-controlled ELECTRICAL INPUT - Voltage : 400 [V] - Frequency : 50 [Hz] - Installed power : 65 [kW] DIMENSIONS OF THE MACHINE - Floor space : 3329 x 2032 [mm] - Height : 2654 [mm] - Weight: 7100 [kg] HOURS - Hours under power : 45965 - Production hours : 19065 EQUIPMENT - CNC Siemens 840D (PL) double NCU - 2 control panels CN - 6 collet receivers TOPLUS with built-in stop - 1 counter-spindle in position 6.1 - Clamping device in counter-spindle : chuck Röhm KFD-HS 110/3 - Coolant through counter-spindle center - Cn options counter-spindle/ polygonal milling - Rear machining device on slide 6.2 : 3x fix - Preparation 2 additional controls with electronic shaft in position 1.2.3 - Preparation 2 additional controls with electronic shaft in position 4.5.6 - STAUBLI robot type TX60 (6 axes) - Robot collet double clamping external type PZN50 - Swiveling plate (4 positions) - Coolant tank KNOLL with hinged chip conveyor, 2 HP pumps 40 [bars] - Oil mist aspiration device Büschel - Cooling unit RIEDEL - Preparation ARTIS Bodpjuhantsfx Afmswp

Condition: used, TECHNICAL DETAILS - Media : A3 type Bwjdjug U R Hspfx Afmsp - Installed power : 8 [kW] - Media volume : 80 liters - Basket dimensions : 300 x 200 x 150 [mm] - Cooling : water - Tank 1 : washing with serial filtration - Tank 2 : rinsing with serial filtration - 1 washing tank : 300 x 200 x 150 [mm] - Continuous distillation : 25 [l/hour] - Size (W x L x H) : 1200 x 1800 x 1500 [mm] EQUIPMENT - Loading system : manual - Ultrasounds : yes - Vapour degreasing : yes - Vacuum drying : yes - Cooling unit HITEMA ECA.008