Used Dilr 40 for sale (21,675)

Condition: excellent (used), Collet chuck Collet chuck SK 40 DIN 69871 Iedslwqc Eepfx Ahvetd Tightening thread M 16 Collet type OZ-467 E length 140 mm 10 pieces with set 150 Euro Single delivery 15 Euro

Condition: excellent (used), Weishaupt RGMS 40 dual fuel burner gas+heavy oil. 2600w Itjdpsmnqbtefx Ahvjd

Condition: excellent (used), Weiss Model: WK11-1000/40 For sale is a professional Weiss Umwelttechnik WT-WK 1000/40 climate test chamber with fully automatic cold-regenerating adsorption dryer. The installed fixtures in the test chamber can be removed if required. Currently, due to these fixtures, the control cabinet is limited to a temperature range of −40°C to +60°C. Once the fixtures are removed, the manufacturer can expand the temperature range back to the standard values of −40°C to +180°C, as the fixtures are not suitable for these higher temperatures. This equipment is ideal for precise temperature and humidity testing on components, assemblies, and devices. It is perfectly suited for applications in industry, development, quality assurance, and research. Weiss Climate Test Chamber – Water Cooled Data for Temperature Tests: - Temperature range: −40°C to +60°C - Temporal temperature fluctuation (at center of usable space): ± 0.1 to ± 0.5 K - Spatial temperature deviation: ± 0.5 to ± 2.0 K - Temperature change rate: - Heating: 4 K/min - Cooling: 3 K/min Data for Climate Tests: - Temperature range: +10°C to +95°C - Humidity range: 10 to 98 % r. H. - Temporal temperature fluctuation (at center): ± 0.1 to ± 0.3 K Ijdpfjx Hxkzsx Ahvetd - Spatial temperature deviation: ± 0.5 to ± 1 K - Temporal humidity fluctuation (at center): ± 1 to ± 3 % r. H. - Thermal compensation: - In the range of +25°C to +95°C - At a relative humidity of up to 90%, 500 W Humidification System Data: - Reservoir volume: 20 l - Water quality: demineralized - pH value: 6 to 7 - Conductivity: 5 to 20 μS/cm³ - Water consumption at constant +40°C, 92% r. H.: 21/24 h - Temperature gradient: - (according to IEC 60068-3-5): 1 to 2 K Test Chamber Dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm External Dimensions: Height: 1980 mm, Width: 1385 mm, Depth: 1850 mm Test Chamber Volume: approx. 990 liters Nominal Voltage: 3/N / PE AC 400 V +10% 50 Hz Nominal Power: 11.5 kW, Nominal Current: 22.0 A Refrigerant: R 404A Weight: 840 kg Important information for your safety as a buyer! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Technical data subject to modifications and errors!) Further questions can be answered via telephone.

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 32,500 kg, empty load weight: 3,800 kg, total length: 12,200 mm, total width: 2,440 mm, total height: 2,600 mm, load capacity: 28,700 kg, door opening width: 2,280 mm, door opening height: 2,260 mm, inner dimension height: 2,350 mm, inner dimension length: 12,000 mm, inner dimension width: 2,330 mm, STANDARD 40 FEET CONTAINER CSC VALID MARCH 24 SEALING Itodpferk Eqvex Ahved IN WORKING CONDITION 2 UNITS AVAILABLE

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter A very rare model on the market. Iedpfx Ahjwmy Riovjtd The machine is ready to work, in very good technical condition. After inspection. Suitable for die-cutting. Central lubrication. Format 40×57 cm Weight 3500 kg Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 433 1 005 659 000, empty load weight: 1,500 kg, axle configuration: 4x2, loading space length: 2,000 mm, loading space volume: 2 m³, total height: 3,000 mm, Year of construction: 1960, Filling and packaging machine for filling welded film bags, suitable for snacks or crisps; can be adapted to other types of bulk product filling. Maximum filling speed is 60 units per minute. All key drive components are new after overhaul: motor, gearbox, clutch, and sealing jaws. Includes many spare parts. Machine No. 1 features a double filling station (one drive unit powers two filling stations). Machine No. 2 has one drive unit for a single filling station. Isdpfx Ahox Htdisvotd

Condition: as good as new (ex-display), Collet chuck SK 40, DIN 69871/OZ32 Collet type OZ32 467 E total length 190 mm parts are unused in opened original packing price per piece 12 pieces available weight per piece 2 kg Ijdpelrt S Njfx Ahvstd

Condition: used, Year of construction: 2008, Cinch Mill 40 milling center ( L et W Machine Tools , Taiwan ) Year 2008 Fagor control X Y Z 1700x820x700 Spindle 6000 rpm Spindle taper BT40 Magazine 24 tools Iedpfxsvwg Tme Ahvstd

Condition: excellent (used), Year of construction: 2012, Meyn Deboner Isdoqwguyjpfx Ahvstd Type: D40 Deboner type: poultry thighs and drumsticks Performance: up to 2400 pieces per hour depending on application Dimensions: 1500x1300x2000 Weight: 500 kg Year : 2012 We encourage a personal inspection, where you can assess the machine on-site, evaluate its performance, and confirm its high quality Preview Video

Condition: excellent (used), Year of construction: 2008, GRASSAIR RLR 40 8B Screw Compressor Atlas Copco screw module Technical specifications: Capacity: 5.30 m³/min (5,300 L/min); Motor power: 30 kW; Max pressure: 8 bar; Operating hours: 12,847 h; Year: 2008; Iedpfxsw Niprj Ahvetd Compressor is fully operational. Net price: 12,200 PLN Gross price: 15,006 PLN Link to video below.

Condition: used, -KOM 3099- CNC lathe VDI 40 tool holder set A set of VDI 40 tool holders consisting of 10 pieces is offered here. Contents: - 1x VDI 40 holder + internal turning tool from 50 mm diameter - 1x VDI 40 holder + internal turning tool from 23 mm diameter - 1x VDI 40 holder + internal turning tool from 16 mm diameter - 1x VDI 40 holder + drill 38 mm diameter - 1x VDI 40 holder + back turning tool from 47 mm diameter - 1x VDI 40 holder + axial parting-off tool - 3x VDI 40 holder Itedpfewuq A Ejx Ahvsd - 1x VDI 40 plug Weight: 30kg

Condition: excellent (used), Year of construction: 2001, For sale are operational and very well-maintained dual-fuel oil/gas burners of the brand Weishaupt RGL40/1-B (2550 kW), including gas valve Dungs DN 65, year of manufacture 2001, with control cabinet. Ijdpfx Aswgk Raehvotd

Condition: used, various tool holders from , mazak, sandvik, mimatic, gerardi, ews, nikken and others. turning-milling tools with the VDI 40 holder only for sale per pallet pallet5 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc pallet 6 euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 7 euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 8 euro 2730 total Itedpfjvry T Nox Ahvjd 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,550 mm, workpiece height (max.): 40 mm, number of spindles: 30, travel speed (max.): 80,000 mm/min, TECHNICAL DETAILS Travel range X-axis: 4,175 mm Travel range Y-axis: 1,550 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Maximum workpiece height: 40 mm Number of suction traverse beams: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X-direction: 10 Total number of spindles: 30 Milling unit Itjdpfoyttcwex Ahved Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid-cooled Saw unit Tool magazine 1 Number of slots: 18 Tool magazine 2 Number of slots: 10 EQUIPMENT NC positioning of suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for installation, securing, and usage of the machine at the destination. External reference: 7350

Condition: used, Year of construction: 2022, 2022 | Bomag BP 12/40 | Used Hand compactor Want the expert inspection report with 0 checked points, 15 extra photos and a full video? Contact us! Listed in a Bid-to-Earn auction: - Earn rewards while bidding – see your reward for each bid - Get your full bid amount back if outbid - Rewards are credited when the reserve is met - Highest bidder wins when the auction ends Why choose us? - Fully inspected machines - Delivered to your jobsite – :articulated_lorry: estimate your shipping cost with our calculator - Money-Back Guarantee - Secure payment methods incl. pay-at-delivery option - Data-driven market pricing Iedsyv Rfvepfx Ahvjtd Location: Germany This machine is available on the Equippo Marketplace as part of a special BID TO EARN AUCTION format.

Condition: new, 20 mm 40 mm MK 4 spindle stroke 160 mm throat 300 mm column diameter 145 mm 615x430 mm 2x14x224 mm distance spindle /table 147/688 mm feed 0,1-0,2-0,3-0,4 mm/U 140-4000 U/min. total power requirement 4,0 kW Machine height 1885 mm Standard equipment: - Electromagnetic feed clutch with overload protection and electrical    Cross Handle Switches - Control and light transformer - Main switch lockable - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Clockwise rotation by contactor control - Speed adjustment stepless - Speed display digital - Speed setting electrically - Protection IP 54 - Motor insulation class "F" Ijdpfx Ajyv Nxbshvjtd - Spindle protection with electrical protection

Condition: new, sheet width 4100 mm plate thickness 35 mm pre-bending 28 mm upper roll diameter 540 mm lower roll diameter 541 mm side roll diameter 440 mm total power requirement 37 kW weight of the machine ca. 48.100 kg Machine dimensions approx. 7670x3000x2930 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds Itjdoyv Nfhepfx Ahvod - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: used, short-term available Itodpfxoyv Eyzo Ahved

Condition: used, We offer used 40HC storage containers available from Kornwestheim, Duisburg, Hamburg, and Frankfurt. Other locations are available upon request. Prices vary depending on location. CONTAINER TYPE: 40HC storage container CONDITION ON DELIVERY: Used, wind- and watertight, cargo worthy, wooden flooring, sample images available Itjdeyv E H Uspfx Ahvjd DIMENSIONS LxWxH: According to ISO standard, external dimensions: 12,192 x 2,438 x 2,896 mm; internal dimensions: 12,032 x 2,352 x 2,698 mm; door dimensions: 2,343 x 2,585 mm; volume: 76.2 m³; weight: 4,000 kg AVAILABILITY: Immediately TRANSPORT: Please provide your postal code so we can send you a free and non-binding quote for the container including delivery and, if required, unloading from the truck. VARIETY: We also supply shipping containers in all standard sizes (20DV, 40DV, 20HC, 40HC, etc.) to suit any requirement. Whether for storage, construction projects, logistical solutions, or sea transport. We look forward to hearing from you! NAUTEXA GmbH

Condition: used, offer consists of: Horizon small size standing delivery ED-40 All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Itsdpsyv Ak Rsfx Ahvjd Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2021, operating hours: 450 h, machine/vehicle number: Z62M-1621, fuel type: diesel, Weights Empty weight: 10.619 kg Functional Mast: articulated arm Lifting capacity: 227 kg Iedpswwghijfx Ahvstd Working height: 2.100 cm Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: Outrigger Max. horizontal reach: 1250 m Transport dimensions (LxWxH): 7.58x2.49x2.9 Additional information Please contact PFEIFER GROUP for more information

Condition: new, 40 mm M 24 M 30 MK 3 bore stroke 120 mm throat 293 mm column diameter 115 mm 514x360 mm 2 x 14 x 224 mm 117/701 mm feed 0,10 + 0,20 mm/U spindle turning speed range 160-2.250 UpM total power requirement 1,45/1,9 kW height of the machine 1840 mm weight of the machine ca. 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital Itodpfxjyvvnve Ahvjd - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection

Condition: new, 40 mm threading in St 60 M24 threading in GG 20 M30 Short spindle MK 3 spindle turning speed - stepless 160 - 2250 U/min Itsdpoyvvm Sofx Ahvsd Center of spindle to wall or column 293 mm Column diameter 115 mm spindle stroke 120 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117/701 mm feed 0,10 + 0,20 mm/U Motor output 1,45 / 1,9 kW height of the machine ca. 1840 mm weight of the machine ca. 285 kg

Condition: new, 40 mm threading in St 60 M24 threading in GG 20 M30 Short spindle MK 3 Center of spindle to wall or column 293 mm spindle turning speed - stepless 160 - 2250 U/min Column diameter 115 mm spindle stroke 120 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117/701 mm feed 0,10 + 0,20 mm/U Motor output 1,45 / 1,9 kW height of the machine ca. 1840 mm Itedpfx Aeyvvmrshvjd weight of the machine ca. 285 kg

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Iedpfx Ahjw Uf Hwovjtd Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition