Pick-and-place robot

Denso KLS VS-6556E/E

Condition: used, Year of construction: 2007, machine/vehicle number: 134418, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, Equipment: type plate available, Technical Data Manufacturer: Zeiss Type: Accura 12/18/10 S/N: 13418 Year of manufacture: 2007 Measuring Plate Hard stone measuring plate Width: 2,400 mm Depth: 1,700 mm Height: 400 mm Measuring Range X-axis: 1,200 mm Y-axis: 1,800 mm Z-axis: 1,000 mm Accessories Control panel PC unit 2 x 27" monitors, brand BenQ Keyboard Mouse Accessories Stored in a two-door metal cabinet Price: on request! Note: Our offer is aimed exclusively at professional customers. Gijdpfxexnruae Anket (Subject to change and error in technical data, details and prices as well as prior sale!)

Condition: as good as new (ex-display), Various designs such as round, hexagonal or square and in smooth smooth version, cross-grooved version or with longitudinal and transverse grooves. A current list of available new and as-new SK32/SK42/SK52/SK65/SK80/SK100 expansion chucks can be found on our homepage. Gisdpfxjh Dmame Ankjt We look forward to your inquiry. STALEX Machine Tools GmbH

Condition: good (used), Year of construction: 2006, Horizon Stichliner SL5500: Gathering towers VAC 60a+m+m+m ST40, Horizon ASF 30, SPF 30 Godpfovmfxgex Anksit Trimmer HTC 30 Counter reading only 14.2 million

Condition: excellent (used), Year of construction: 1975, -KOM 1002-

 Offered here is a press of the company HYDRAP of the type HKPS8000. Technical data: Type: HKPS8000
 Year of manufacture: 1975
 effective stroke: 200mm Giedpfxsg Ufvbj Ankjt throat: 250mm (at center) table size: 320x320mm Installation height: approx. 345mm Voltage: 380V 
Perm. load: 80000N
 Drive type: HYDR Drive power: 1,5kW Oil quantity: 60l Oil viscosity: 3°E

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, cooling capacity: 56 kW (76.14 HP), type of cooling: water, input frequency: 50 Hz, heating capacity: 67 kW (91.09 HP), fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Nissan K25 Engine Power source: 230 V AC, 1 Phase, 50 HZ Gjdpfx Aned Tiu Eskjit Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Design pressure low side: 16 bar OUTDOOR USE ONLY! We have 4 pieces on Stock!

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar - Year: 2007 - including chip conveyor - coolant tank Godpfx Aev S Svvonkjit - immediately available

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: 1005/40200317/2010, color: grey, macchina perfetta in ogni sua parte, pronta per essere messa in produzione composta da : sfilatore a cassetto / 3 mettifogli dei quali 1 con dischi di lancio 1 sdoppiabile per doppio inserimento inserti, 1 pivottante a 90 gradi per inserimento inserti in linea di senso di marcia, incollatore abbinato ad etichettatrice elettronica per inserimento indirizzi da 1 pollice a 4 pollici da 2 a 4 piste oltre anche per conti correnti, confezionatrice predisposta con apparato stirofilm per riduzione del lasco sacchetto, staker di raccolta e conteggio prodotti con espulsioone laterale e nastro meccanico di uscita prodotto. Gedpfx Aneuxmliskeit

Year of construction: 2007, condition: used, Sewing line Meccanotecnica Multiplex SA Year: 2007 Gathering machine: Raccoglitrice MX - Number of gathering stations: 18 - Optical sheet control - Pump(s) - Distribution unit - Distribution section into 2 sewing machines Sewing machine (1) Meccanotecnica Aster 2000 Year: 2007 - Colour monitor - Pre-loader Gedpfet Sz T Hsx Ankoit - Optical sheet control - 4 + 4 opening possibilities - Book block separator - Book stacker: Plus stacker Sewing machine (2) Meccanotecnica Aster 2000 Year: 2005 - Pre-loader - Optical sheet control (BAK) - 4 + 4 opening possibilities - Book block separator - Book stacker: Plus stacker

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Gijdeh Eibajpfx Anket Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: ready for operation (used), Year of construction: 2007, operating hours: 46,000 h, Axes: 4, load capacity: 180kg, working radius: 3200mm, positioning accuracy: +/-0.25mm, max. total load: 430kg, cycle output: 30/min. Control: KR C2: max. control axes: 6, weight: approx. 35kg. Robot weight: approx. 1200kg, dimensions X/Y/Z: approx. 1200mm/1800mm/1700mm, robot set-up dimensions X/Y: approx. 1000mm/1000mm, operating hours: approx. 46000h. Documentation available. An on-site inspection is possible. Giodpfxot R Trfe Anket