Used Demag Pk 2 for sale (519)

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, Crane remote control switch without cable Hjdpfx Aaoxzqghehop -Type: DSK3 DP2 -Transport dimensions: 500/90/H120 mm -Weight: 0.8 kg

Condition: good (used), Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer-Motor DEMAG Type: KBF80A8/2 -Manufacturer-Gearbox DEMAG Type: AF04-MPower: 0.13/0.50 kW Hedsw N Sdlspfx Aahsp -Speed: 43.4/186.8 rpm -Design: hollow shaft -Hollow shaft diameter: toothed Ø 22/25 mm -Protection class: IP54 -Dimensions: 445/155/H270 mm -Weight: 22.4 kg

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: 6x Option key, 2-stage -Connector: 16-pin Hjdpfx Aaoxzq Thjhsp -Transport dimensions: 630/370/H140 mm -Weight: 5 kg

Condition: refurbished (used), DEMAG wire rope hoist / crane DH 316 H12 (completely overhauled) 2 units available. Hjdpfx Aaoxq Rx Aehsp

Condition: used, Pillar Jib Crane DEMAG Type KBK 2 Year of manufacture: 1979 Load capacity: 500 kg Slewing range: 270° Outreach: 3200 mm Overall height: 3250 mm Jib length: 3100 mm Height to underside of jib: 2730 mm - Jib profile DEMAG C-section rail KBK 2 Hodpfxextq Ame Aahsp - Trolley for DEMAG C-section rail KBK 2 - Base plate of crane pillar is no longer original L x W x H = 450 x 450 x 25 mm with cut-out (4 holes Ø approx. 28 mm) Dead weight: 270 kg Good condition

Condition: used, Electric chain hoist, electric lifting gear, crane DEMAG type DKUN 2-160 K V3 F6 Serial no.: 61620975 Year of manufacture: 1995 Load capacity: 310 kg Hook path: 1.45 meters Distance from suspension to load hook: 450 mm Hedpfx Ajxpqz Isahep Lifting speed: 12.5 m/min (double fall) Pendant control cable length: approx. 1.9 meters Mains connection: 400 Volt, 50 Hz - 2 lifting strands = 300 kg - only one lifting speed Weight: 33.5 kg

Condition: used, Electric chain hoist, electric lifting unit, DEMAG crane, type DKES 2-200 K V2 DI with Dematik BUS control via crane control system Hsdpfx Aaegd Ipnehep Factory No. 61456646, Year of manufacture 2003 Load capacity: 200 kg Hook travel: 4.0 meters Main lifting speed: 14.0 / 19.2 m/min Fine lifting speed: 0.20 m/min Chain size: 4.2 x 12.2 mm 1 load strand = 200 kg - with DKES2/5 500V control logic - without crane operating control - Dematik BUS control via crane control system - without trolley Mains connection: 400 volts, 50 Hz Rated power: 750 W Rated current: 2.4 A in good condition

Year of construction: 2019, operating hours: 4 h, condition: used, functionality: fully functional, lifting height: 50,000 mm, main lifting speed: 12,500 mm/min, i=72, KBH140 B4, absolutely new condition, 100% SWP, incl. bottom block, without DMF (can be offered) Hsdpfxoq R N Tmj Aahjp Stepless control with inverter and radio with belly console optionally available!

Year of construction: 2022, condition: new, functionality: fully functional, lifting height: 12,000 mm, main lifting speed: 6,300 mm/min, i=79, new, 2x available, with bottom block, without electrics, without DMF KBH 140 B4 + KBA 80 B4 Hsdoq R N T Hopfx Aahep Fine input gearbox F10 Various accessories on request

Condition: used, 2-stage electric motor with gearbox DEMAG Type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 125 B Motor No.: 3926599 Speed: 915 rpm Motor power: 4.7 kW Power supply: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement during direct drive Hjdpey N D E Ajfx Aahop 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 80 A Motor No.: 3926599 Speed: 1360 rpm Motor power: 0.83 kW Power supply: 400 Volt, 50 Hz - Brake disengages via armature thrust movement during operation - When stationary, the brake operates through the reduction gearbox on the motor - Output speed via gearbox: 174 rpm Reduction gearbox DEMAG Type FG 08B-B3-23-H1-F1 Gearbox No.: 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor armature: Ø 32 mm Shaft stub length: 80 mm Centering diameter at motor: Ø 125 mm Bolt circle diameter at motor: Ø 150 mm / 4xM12 internal thread Dimensions (LxWxH): 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 80400008, clamping force: 2,800 kN, screw diameter: 45 mm, injection weight: 320 g, ejector stroke: 200 mm, opening stroke: 675 mm, Loading the machine is possible for an additional charge of €500! TECHNICAL DETAILS Clamping force: 2,800 kN Number of components: 1 Width of clamping plate: 950 mm Height of clamping plate: 950 mm Free distance between bars, horizontal: 630 mm Free distance between bars, vertical: 630 mm Diameter of centering ring: 160 mm Minimum installation height: 330 mm Maximum installation height: 710 mm Maximum opening stroke: 675 mm Maximum ejector stroke: 200 mm Maximum tool weight: 3,700 kg Maximum tool weight, moving side: 2,500 kg MACHINE DETAILS Thread: M20 Hsdpfszdiyxsx Aahjp Screw diameter: EE1: 45 mm Maximum shot weight PS: EE1: 320 g Unit arrangement: EE1: horizontal EQUIPMENT Core pull, 2-fold Cascade, 6-fold Robot Note: The operating hours can be found in the last image.

Condition: good (used), Friction wheel, running wheel, bridge crane, overhead crane, assembly crane, workstation crane, crane wheel, flanged wheel -Crane wheel: Flanged wheel, heavy-duty flanged wheel -Type designation: DG BM 59834544 -Impeller diameter: 225 mm -Track width: up to 55 mm -Hole: Ø 60 x 55 mm -Quantity: 1 piece available -Dimensions: Ø 255 x 85 mm Hedpfx Aezhuhijahsp -Weight: 8.5 kg

Condition: good (used), Crane block, crane hook, load hook, single hook, lower block, pulley cover -Manufacturer: Demag, Rope Pulley Cover Set -Type: unfortunately without a type designation -Bore: Ø 50 mm Hjdoxd Th Tepfx Aahjp -Quantity: 2 sets available -Price: per set -Transport dimensions: Ø 278 x 60 mm -Weight: 2.8 kg

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Hjdpfx Ajwlkcasahjp Payment terms: 100% before takeover of the machine, net

Condition: used, Year of construction: 2008, operating hours: 35,000 h, clamping force: 100 kN, displacement volume: 51 cm³, injection pressure: 2,800 bar, overall weight: 5,000 kg, screw conveyor diameter: 25 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net Hjdpfxjwlkb Nj Aahep

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Delivery time: by arrangement Hodjwz R Iuspfx Aahjp Freight basis: ex-works

Condition: good (used), Year of construction: 2005, functionality: fully functional, Robot Demag W710 axis) (Wittmann) Hedpfx Aajxp Nu Tshsp Number of axis: 3 X- 600 mm Y- 800 mm Z- 1500 mm

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Hjdoyg Eu Sspfx Aahjp Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 Hours: 42493 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: reconditioned (used), Year of construction: 2021, Gantrycrane 2x35 ton 25 or 28 meter spann longer possible Hjdpsggggpjfx Aahsp

Condition: used, Year of construction: 2003, Gantrycrane 25 ton single hoist now 12,5 ton Hedpfef Dzqyjx Aahsp

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: Solomat, Solomat / Donati / Demag hall crane, portal crane, bridge crane including floor-mounted guide rails Dimensions of the steel structure: approximately 26 x 13m with 1x Demag bridge crane 2.5t - gauge 12.9m Useful load/lifting capacity: 2000KG - 2t Technical data of the system: Length of guide rails including power supply: approximately 26m Overall width, outer edge: approximately 13.1m Total crane height: approximately 3.9m Top of bridge: approximately 3.9m Bottom of bridge: approximately 3.6m Hook height: approximately 3m Gauge: 12.9m Crane girder: HEA340 Carriages: HEA180 Hjdpfx Aezhik Eoahsp The system will be delivered complete: - 1 bridge with a 2000kg Donati chain hoist with floor control including carriages and steel structure - Control system including Demag DRS 125 wheel blocks including drive - Guide rails and power supply The crane is dismantled and immediately available Inspection record and CE certification are available The location of the item is 75053 Gondelsheim Very good condition, see pictures. Hardly any operating hours! Shipping by freight forwarder or collection only by prior arrangement.

Condition: ready for operation (used), Year of construction: 2007, clamping force: 1,000 kN, screw diameter: 40 mm, injection pressure: 1,865 bar, injection weight: 192 g, Year of manufacture: 2007 Injection weight: 192 g Injection unit 410 Screw diameter: 40 mm Specific injection pressure: 1865 bar Injection volume: 217 cc Injection weight: 192 g Screw L/D ratio: 20 Mold closing unit 100 Mold plate dimensions: 600x600 mm Distance between columns: 420x420 mm Ejector force: 35 kN Mold height: 200 mm Ejector stroke: 100 mm Weight: 5000 kg Hsdozhbmfspfx Aahep Year of manufacture: 2007 Control: MC4 Equipment: - 2 x hydraulic core - pneumatic valve - Euromap 67 connector

Condition: used, functionality: fully functional, Year of construction: 1976, machine/vehicle number: ROD109, 1 Demag KBK I wall-mounted slewing crane, 500 kg load capacity / lifting capacity Jib length 2 m, 500 kg load capacity with Demag DC chain hoist, load capacity 500 kg (year of manufacture 2007) Weight incl. wall bracket approx. 150 kg Complete with chain hoist, cable trolley, travel carriage, and small parts Slewing range 270° Hsdpfx Aaoxmuuyehep Item location: 75053 Gondelsheim The system is fully dismantled and immediately available Shipping by freight carrier or collection Please enquire about shipping costs according to postal code

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) Hjdpfx Aasymqz Rohsp delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Electric chain hoist, DEMAG Type DKM 1-80 K V2 F4 Manulift Manufacturer's No. 63904165, Year of manufacture 1998 Load capacity 80 kg Hook travel 2.8 meters Lifting speed 14 m/min Fine lifting speed 3.5 m/min Motor power 0.34 / 0.09 kW Mains connection 400 Volt, 50 Hz Hsdpfozd Hi Rsx Aahep 1 load chain = 80 kg Manulift hand control directly on the crane hook Weight 18 kg Good condition