Used Demag Df 115 C for sale (529)

Condition: good (used), Crane system with two fixed (l= ~7.000 mm) and three running rails (l= ~6.000 mm) with trolleys which allow the mounting of log clamps with hoist. Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Ppjdpfjg Dgdvjx Ahyjr Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.

Condition: good (used), Crane system with two fixed (l= ~6.000 mm) and three running rails (l= ~6.000 mm) with trolleys which allow the mounting of log clamps with hoist. Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder. Podpfxeg Dgh Ij Ahyspr

Condition: good (used), Crane system with two fixed (l= ~7.000 mm) and three running rails (l= ~5.000 mm) with trolleys which allow the mounting of log clamps with hoist. Tilt prevention system allows smooth and perfectly parallel displacing of the running rails. Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder. Ppjdpfx Aog Dghcehyor

Condition: good (used), Crane system with two fixed (l= ~14.000 mm) and three running rails (l= ~6.000 mm) with trolleys which allow the mounting of log clamps with hoist. Tilt prevention system allows smooth and perfectly parallel displacing of the running rails. Max weight per rail = 1.000 kg. Psdpog Dgg Rjfx Ahyjpr Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.

Year of construction: 1989, condition: not inspected (used), The crane is dismantled. Inspection book available. Ppedpfxjf Sfxqj Ahyor

Condition: ready for operation (used), Year of construction: 2003, operating hours: 96,986 h, clamping force: 600 kN, screw diameter: 30 mm, This DEMAG ET60-200 concept hydraulic injection moulding machine was manufactured in 2003. It features a clamping force of 600 kN and a maximum mold weight of 580 kg. The machine includes a robust injection unit with a screw diameter of 30 mm and an injection pressure of 1900 bar. Consider the opportunity to buy this DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further details. • Clamping unit: • Tie bar spacing (H x V): 420 x 420 mm • Platen dimensions (H x V): 530 x 540 mm • Min. mold installation height: 210 mm • Opening stroke: 400 mm • Max. mold weight: 580 kg (moving side 380 kg / fixed side 200 kg) • Ejector: • Stroke: 125 mm • Force: 41 kN • Retraction force: 15 kN • Pneumatic ejector: Yes • Core pull control: Yes (2 units, on the ejector side/AS) • Injection unit 1: • Unit size: 200 • Screw diameter: 30 mm • Injection pressure: 1900 bar • Stroke volume: 106 ccm • Shot weight (PS): 94 g • Screw L/D: 20 Pjdpfx Asyg Nfuehyspr • Nozzle radius: 15 mm • Armored/wear-resistant injection unit: Yes • Process control: SPC (Yes) • Note: Maximum crane load warning: 2 metric tons Additional equipment • Robot/removal device: W621-1381 • Travel paths: Y 1200 mm, X 550 mm, Z 1500 mm • Hot runner controller: 7-zone integrated control • Mold sensors: Kistler (p=1/t=0)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,642 h, screw diameter: 45 mm, total height: 2,213 mm, overall weight: 15,750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information. Additional equipment • Fanuc Robot Machine Benefits Qualitative Machine Benefits • Process data acquisition, mould protection Technical Machine Benefits • Mould height min: 350 mm / mould height max: 745 mm • Main electronic connection: 3/400 v 50hz • Programmable sequence, highly dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Extra Information Standard equipment: Support of the moving mould mounting platen via linear guides/ Ejector short / long stroke/ Interface for external printer (hardcopy)/ Individual axis movement optimization (activeAdjust)/ Four-stage mould closing and four-stage mould opening sequence/ Pump drive power II, increased (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3 phases + N + PE/ Mains connections drive / heating separate/ Data display coloured/ Oil cooler reinforced (cooling water supply up to 35 °C)/ Water connection for mould and machine cooling separate/ Basic version Europe/ Corrosion protection/ Paint finish: Deep black (RAL9005): Machine bed with internals, lower switch cabinet/ Signal white (RAL9003): Clamping unit, injection unit, nozzle guard/ Signal white (RAL9003): Fixed safety devices, upper switch cabinet/ Signal white (RAL9003): Safety doors/ Textured surfaces: Elastic machine bearings/ Digital and wear-free position measuring system (ultrasound/high-resolution rotary encoders for injection, mould and ejector movement)/ Mould connection dimensions type E (according to EUROMAP March '96)/ Centring diameter fixed platen: 160 mm/ Centring diameter moving platen: 160 mm/ Without side ejector plate/ Standard mold installation height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety gate is closed)/ Ejector with position control (p/F+v independently programmable, parallel to mold movement)/ Toggle lever oil lubrication/ Injection unit/ Optional equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for ultra-fine filtering in the bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), can be disconnected via main switch/ Socket IECEE 3Ph / 400V-16A, can be switched off via main switch/ Flashing light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on movable tool plate (programmable)/ 6 pneumatic 5/2-way valves on fixed tool plate (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with non-return valves)/ Manual pressure relief for core pull 1-circuit/ Protective clothing on operator side widened (250 mm)/ Hot runner control 12 zones, integrated (2, 75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force control/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Pedpex D Hntofx Ahyepr Material hopper for automatic filling/ Hopper shut-off with emptying option/ Holding pressure switchover dependent on hydraulic pressure (with pressure recording)/ Nozzle contact pressure when mold is open (programmable)/

Condition: ready for operation (used), Year of construction: 2013, operating hours: 27,551 h, clamping force: 2,200 kN, total height: 2,100 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Additional equipment • Sepro Robot SDR 22 Machine Benefits Technical Machine Benefits • Screw diameter: 45 mm / screw geometry: standard / l/d ratio: 20 / specific injection pressure: 2150 bar / maximum shot volume: 329 cm³ / maximum shot weight: 293 g / injection rate without accumulator: 254 cm³/s • Dosing stroke: 207 mm / maximum nozzle stroke: 450 mm / nozzle immersion depth: 20 mm / nozzle contact force: 58 kn / number of heating zones: 4 / hopper capacity: 50 l / maximum injection speed: 160 mm/s Pedjx D Hnyopfx Ahyjpr • Holding force: 2420 kn / maximum opening stroke: 550 mm / minimum mold height: 300 mm / maximum mold height: 580 mm / maximum platen distance: 1130 mm • Mold clamping plates (hxv): 880x830 mm / clearance between tie bars (hxv): 610x560 mm / ejector stroke: 150 mm / ejector force: 58 kn • Dry cycle time according to euromap 6 (stroke): 427 mm • Net weight without oil: 10100 kg Dimensions Machine Depth 6460 mm

Year of construction: 2019, condition: ready for operation (used), This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information. • The dosing unit (orange part) is not included. • Integrated socket combination, country-specific, • can be switched off via main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current device • Pneumatic 5/2 valve No. 1 on movable mold clamping plate; • programmable, supplied via central air connection • includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point outside the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core puller via switching valve on movable mold clamping plate; Q-independent (programmable); • With pilot-operated check valves to prevent core creep • Mold connection dimensions E (similar to Euromap March 96) • With side ejector plate, centering diameter of fixed platen: 160 mm • Centering diameter of movable platen: • Mold installation height increased by 100.0 mm Ppodpfx Aox D Nluohyor • Min: 340 mm • Max: 790 mm

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, clamping force: 500 kN, screw diameter: 25 mm, injection weight: 46 g, total height: 1,779 mm, overall weight: 4,200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Additional equipment • Granule Dryer • Handling System • Conveyor Belt - 1400 mm x 400 mm • Precision Scale • Temperature Units - 2x HB‑Therm Machine Benefits Technical Machine Benefits • Exceptional energy efficiency • Enhanced platen rigidity and mold safety Pjdpfx Aex D Eccshyjpr • Fully electric direct-drive system • Ultra-precise direct-drive motors with 0. 1 ms response time • Displacement: 52 cm³ • Spray pressure: 2180 bar • Tool clamping platens: 520 x 570 mm Extra Information Control Unit Advanced control system with NC5+ Automatic mold height and clamping force adjustment Energy-saving routines Dimensions Machine Depth 4308 mm

Condition: ready for operation (used), Year of construction: 2013, operating hours: 17,577 h, clamping force: 1,600 kN, total height: 2,060 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Additional equipment • Sepro Robot SDR 11 Machine Benefits Technical Machine Benefits • Clamping unit: 160 / locking force: 1760 kn / opening stroke max: 495 mm / mould installation height, min: 275 mm / mould installation height, max: 585 mm Ppjdpfxox D Hnmo Ahyjr • Platen distance, max: 1080 mm / mould mounting platens (h x v): 760 x 785 mm / clear column distance (h x v): 520 x 520 mm • Ejector travel: 125 mm / ejector force: 35 kn • Injection unit: 340 / screw diameter: 35 mm / l/d ratio: 20 / injection flow (ps) without accumulator: 288 cm³/s • Metering stroke: 162 mm / nozzle stroke, max: 350 mm / nozzle immersion depth (svo): 20 mm / nozzle contact pressure: 30 kn • Material hopper capacity: 35 l / injection speed, max. , standard: 300 mm/s / injection speed, max. , increased: 500 mm/s • Net weight without oil filling: 7300 kg Extra Information Electrical & Pneumatic Interfaces: Sockets: 2 x Schuko (1Ph, 230V, 10A)/ 2 x IECEE (3Ph, 400V, 16A) – switched off via main switch/ Additional Schuko socket also listed (same rating)/ Valves: 1 x Pneumatic 5/2 valve on movable platen (programmable)/ 2 x Pneumatic 5/2 valves on stationary platen (programmable)/ I/O: 3 digital inputs / 3 digital outputs (freely programmable)/ Terminal board outside control cabinet/ Air & Cooling: Central air supply and piping/ Cooling system: open cycle/ Cooling water controller: 4 circuits with temperature indication (max. 10 l/min per circuit)/ Separate water connection for cooling (mould + machine)/ Switch-off for mould cooling (time programmable)/ Machine Mechanical & Motion Features: Clamp and injection unit colours: Jet black (RAL9005): bed, pump station, lower control cabinet/ Signal white (RAL9003): clamp unit, injection unit, guards, covers, safety doors/ Mould platen layout: E-standard (similar to EUROMAP, March 1996)/ No side ejector platen/ Ejector: held in front position against spring-loaded mold ejector/ Standard mold height/ Standard closing speed/ Only active movement when safety guard is closed/ Screw: wear-resistant, nitrided barrel, standard L:D, 35 mm diameter/ Non-return valve: 3-piece ring type/ Control, Programming & Monitoring: Inputs/outputs and clamp sequence: freely programmable/ Switching programs (e.g., dry cycle, startup scrap counter, timer-controlled cooling)/ Injection process: Injection force with max injection speed: 200 mm/s/ Back pressure programmable via 6-point polygon/ Follow-up pressure switch-over based on melt pressure/ Follow-up, back pressure, metering: closed-loop control/ Feed throat temp control: closed-loop, max 90°C ±9°C/ Reduced nozzle sealing force (programmable)/ Clamp force: closed-loop control/ Active mold protection: sensor-based during closing/ Hot runner control: 5 zones integrated (2.75 kW total) Display, Software & Data: Coloured data display PDA (Process Data Acquisition): 100% control with graphical parameter recording/ Overlaid graphs for multiple cycles/ External statistical data export/

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,810 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. It's equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine. • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mold height: 330–830 mm • Opening stroke: 675 mm • Max daylight (distance between platens): 1505 mm • Mold weight capacity: fixed side 1100 kg, moving side 2200 kg (total 3300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centering ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1351 bar • Plasticizing rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle bore: 3 mm • Max dosing stroke: 225 mm • Note: Second injection unit listed with no data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Stroke: Y (vertical) 1600 mm, X 900 mm, Z 2500 mm • Hot runner control: 9 zones • Mold sensing: Kistler pressure (p=1) / temperature (t=0) system Ppsdpfxeyfq Alo Ahysr • Valve gate control: hydraulic (pneumatic not equipped)

Condition: excellent (used), Chain Hoists - DEMAG / STAHL - 14 units: 1. Demag DKUN 10 - 2.5 t. 2. Demag PK10 - 2 t with electric travel trolley, control box, cables. 3. Demag PK 10 - 1000 kg. 4. Demag DKUN 5 - 500 kg. 5. Demag D-BE - 160 kg. 6. Demag PK 2 F - 500 kg. 7. Demag PK 2 N-F - 250 kg. 8. Demag chain hoist - 3 units: 1. Demag DKUN 2 - 250 kg. Podpfx Ahsyvwbwoyspr 2. Demag PK 2 N - 500 kg. 3. Demag PKVUN 1 - 125 kg. 9. Demag PK 1 N - 125 kg. 10. Demag Motor PKUN 1 - 125 / 250 kg. Stahl chain hoists: 1. Stahl T 405 M - 1000 kg. 2. Stahl T 302 S - 500 kg.

Condition: new, Bottom blocks / crane hooks / hooks – 53 pieces: Bottom block – 40 tons for DH / DR / DMR (price and photos on request) Bottom block – 32 tons for DH 2000 / P2000 (price and photos on request) 1. Bottom block – 20 / 25 tons – (1 piece). 2. Bottom block – 12.5 tons – (1 piece). 3. Bottom block – 12.5 tons (without hook safety latch) – (1 piece). 4. Bottom block – 10 tons – (2 pieces). 5. Bottom block – 6.3 tons – (1 piece). 6. Bottom block – 12 / 10 tons / 6.3 tons / 3.2 tons / 2.5 tons – (3 pieces). 7. Bottom block – 5 tons / 3.2 tons – (2 pieces). 8. Bottom block – 4 tons (2 pieces, unused with storage marks). 9. Bottom block – 3.2 tons (2 pieces, used). 10. Bottom block – 2.5 tons, without hook (2 pieces). 11. Hook for chain hoists – 2 / 2.5 tons (1 piece). Abus bottom block / hooks: 1. Abus bottom block – 30 tons (used). Pjdpfsyvvbcsx Ahyspr 2. Abus bottom block – 12.5 tons (new, without hook safety latch). Konecranes bottom block – 5 tons (used). Hook – 150 tons (2 pieces, new). Hook – 40 tons (1 piece, new). Hook size no. – 2.5 (1 piece). Hook – 15 pieces. Hook – 12 pieces. Hook – 15 pieces.

Condition: excellent (used), DEMAG / ABUS / STAHL / KONECRANES / SCHNEIDER / TELEMECANIQUE – Pendant control stations / Pendant pushbutton stations / Empty enclosures: DEMAG Pendant Control Station / Pendant Pushbutton Station: 1. Type: DST 9 / DST 6/7 / DST 6 / DST 3 – 27 units (used). 2. Type: DRC10 2ST D3 – 2 units (new). 3. Type: DSE 10CS – 1 unit (new). 4. Type: DST 9 SP222 – 1 unit (new). 5. Type: DSE 8 P222BE – 1 unit (used). 6. Type: DCS – 1 unit (new). ABUS Pendant Control Station / Pendant Pushbutton Station: 1. Type: 70268 – 2 units (new). 2. Control cable Type: SC15X1 L., 2000 mm – 2 units (new). STAHL Pendant Control Station / Pendant Pushbutton Station: Pedpfxjyvuaks Ahyspr 1. Type: STH 1202 - 021 – 1 unit (new). 2. Type: STH 1202 - 021 – 1 unit (used). KONECRANES – 1 unit (new). SCHNEIDER Pendant Control Station / Pendant Pushbutton Station: 1. Type: XACA 1436217 – 1 unit (new). TELEMECANIQUE Pendant Control Station / Empty Enclosures: 1. Type: XAC A08 – 2 units (new). 2. Type: XAC B02 – 2 units (new). 3. Type: XAC B06 – 1 unit (new). 4. Type: XAC B04 – 1 unit (new). ROTARY SWITCH – pushbutton – 1 unit (original packaging).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, overall weight: 11,800 kg, total length: 16,700 mm, load capacity: 10,000 kg, working height: 11,350 mm, lifting height: 11,350 mm, Equipment: documentation/manual, Demag overhead crane – Type: double-girder – Capacity: 2x 5,000 kg – Lifting height: 11.35 m – Year of manufacture: 2021 Ppedpfsyvr Husx Ahysr – Hoist type: wire rope hoists – FEM/ISO hoists: 2m / M5 – Manufacturer: Demag / Siempelkamp Dimensions – Span: 16,700 mm (center-to-center) – Total length: 17,000 mm – Installation height: 1,600 mm – Width: 3,860 mm – Wheelbase: 3,150 mm – Suitable for crane rail: A55 / 50 x 30 mm – Net weight: 11,800 kg Speeds – Hoisting: 8/1.3 m/min – Trolley travel: 20/5 m/min – Crane travel: 40/10 m/min Features – Control: radio control – Crane manual available: yes – Electrical diagrams available: yes – Condition: in very good condition. – Disassembled: yes, available immediately – Special features: 8.5 ton Equator with carousel available as option

Condition: excellent (used), DEMAG / ABB / TELEMECANIQUE – Frequency Converters / Inverters – 11 units: 1. DEMAG Type - ACS800 04M-0140-3+D150+E210+H355+H356+H360 with resistance unit (new) – 1 unit. 2. DEMAG Type - ACS800 04M-0210-3+D150+E210+H355+H362+N672 with resistance unit (used) – 1 unit. 3. DEMAG Type - UD DPU415V024E10 – 1 unit. 4. TELEMECANIQUE Type - ATV 58ED23N4 – 15 kW (in original packaging). Psdpfx Aoyu S Alehyjpr 5. DEMAG Type: ABB – ACS 800 – 2 units. 6. DEMAG Type: ABB – ACS 800 – 1 unit. 7. VACON / AC DRIVE – 3 units. 1. VACON Type: X4K40400C 2. VACON Type: XX4K440075C 3. AC DRIVE Type: X4K40075C1 8. AC DRIVE Type: X4 – 1 unit.

Condition: excellent (used), functionality: fully functional, Year of construction: 1986, machine/vehicle number: MIKA-CN, Technical specifications: 1x Demag KBK 1 pillar jib crane, rated load 125 kg with Demag DC chain hoist (125 kg - year 2007) Load capacity at full outreach: 125 kg Height: approx. 3.05 m Underside of jib: approx. 2.55 m Outreach: 3 m Hook height: approx. 2.15 m Total weight: approx. 300 kg Psdpfx Ahjyu E I Isyepr Equipped with 125 kg Demag DC chain hoist Including pin, cable drag chain, trolley, end cap, etc. Slewing range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location: 75053 Gondelsheim Additional cranes with load capacities from 80–5000 kg available, please enquire See photos Shipping via freight forwarder or collection by appointment only

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request Ppjdpfsymqz Rox Ahyor terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2005, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request Ppsdpjymqz Defx Ahyer terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2005, clamping force: 110 kN, displacement volume: 398 cm³, injection pressure: 1,550 bar, overall weight: 5,700 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request Psdpfx Aeymqzqjhyopr terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2005, clamping force: 110 kN, displacement volume: 398 cm³, injection pressure: 1,550 bar, overall weight: 5,700 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Pedpjymqzkofx Ahyepr

Condition: used, Year of construction: 2006, weight max. 500 kg throat 5.000 mm Pedeu Hq Rrepfx Ahyspr base plate 0,7 x 0,7 m dimensions of the machine ca. 5,14 x 0,70 x 4,75 m Crane DEMAG - DC-COM 1/1 H5

Condition: used, Suspension crane runway Crane system made of aluminum system profile similar to GIS GISKB ALU, EEPOS, KITO ProSystem, ERIKKILA No DEMAG but similar to KBK Overhead monorail system with single girder crane bridge Light crane system made of aluminum system profiles Load capacity: 125 kg Span: 3.2 meters as single girder bridge Profile height: 155 mm Profile width: 100 mm - Natural anodized aluminium profiles Pedpfx Asuch Rfohyspr - Carriage with smooth-running plastic rollers - Power supply via trailing cable on the wire rope Consisting of: 2 pieces of 4.8 meter aluminum system profile for the longitudinal track with 3 suspension eyelets each 1 piece of 3.35 meter aluminum system profile for the crossbeam (single girder bridge) with 2 suspension eyelets 1 trolley for crane suspension on the crossbeam 1 carriage on the longitudinal beams (2 pieces) 6 end covers suitable for the profile rails Weight of profile rails: 125 kg Very good condition, as good as new Hoists can be found in our WebShop under the search term "chain hoist" You can find suitable assembly material in our WebShop under the search term "KBK"

Condition: used, Year of construction: 2003, clamping force: 150 kN, displacement volume: 399 cm³, injection pressure: 1,598 bar, overall weight: 7,500 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request Ppedpfx Aeylz Aiehysr terms of payment: 100% prior to delivery