Injection molding machine up to 1000 KN

DEMAG Ergotech 1000-430

Condition: new, Year of construction: 2021, functionality: fully functional, surgical mask line, high speed surgical mask line, Food Pad, wound pad, mask line The 3-ply surgical mask line , wound pad, mask production system offered here combines efficiency and safety features with a first-class meat pad, food pad, fruit pad . The integrated extra module "Single Pack" enables the food pad production machine to pack each mask individually wrapped at full speed of up to 800 pads / min. The film rolls also have an autosplice function, so that the system weld the film together on the fly while unit operation. Surgical mask line can be used as following outer layer Spunbond nonwoven middle layer is meltblown layer bottom layer is spunbond nonwoven The food pad is made up of 3 layers of non-woven material: - An outer layer of spunbond/film - A meltblown filtration layer/sap , saf , fluff, pulp absorbent layer - An inner layer of spunbond/film surgical mask line food pad meat pad fruit pad These product features are realized thanks to the use of precise welding rollers, a modern and intuitive HMI with touchscreen function for simple and clear operation, as well as web guiding systems implemented. Intelligent sensors ensure that the material levels are precisely determined. If a low material level is detected, the material is welded to one another using the autosplice function without stopping the system. Plant details: - Solid, high-quality system structure with over 25 tonnes for maximum stability - Pneumatic material winding shafts for flexible and easy exchange of the rolls - Pneumatic material winding shafts in double design for quick set-up times and convenient handling - Adjustable web tension through pneumatic modules Iodpjh Rwk Tofx Adnea - Autosplice function for convenient material welding at the end of the roll - Individually controlled winding shafts for maximum precision E3b2qnt - Servo driven unwinder, PLC control - Sensor technology for material presence control - Automated alarm & stop function in the event of material tear - Web guiding for maximum precision of the raw material - Large and intuitive touchscreen - The touch screen can display the diameter of the rolls, the material ratio, the servo load and alarm codes - The machine speed can be conveniently set on the touchscreen - Error messages can be tracked in the alarm and error history. These include: Raw material, joining, splicing and fan defects - The production quantities and other details can be viewed on the HMI aswell Performance data: - Power consumption: on request - Power connection: 380 V / 50 Hz - Number of cycles: up to 800 masks / min. - depending on the material - Carton: depending on the packaging format - Compressed air: 6-8 bar with sufficient volume / reserve - Dimensions: 15 m x 4 m x 3 m (LxWxH) - different depending on the equipment - Weight: 25 tonnes - varies depending on the equipment System modules: - Unwinding units for spunbond, meltblown andfilm with automatic splicing unit side embossing unit - Triple folding food pad. - food pad n the side embossing unit - End cutting unit (high speed steel) - Product exit conveyor - Single pack packaging module - Security doors with sliding construction

Year of construction: 2005, condition: ready for operation (used), There are two BOY 55M available, both year of construction 2005. Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included. Iedpotyaypsfx Adnoa

Condition: good (used), Year of construction: 2006, Clamping force: 250 tons Isdergw Exjpfx Adnoa Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Condition: excellent (used), Year of construction: 2006, Clamping force: 500 t Screw diameter: 80 mm Platten dimensions: 1300 x 1200 mm Distance between tie bars V: 900 mm Distance between tie bars H: 900 mm Shot volume: 1779 cm3 Shot weight: 1620 g Injection pressure: 1855 bar Working hours: 46.511 Type: Horizontal Drive: Hydraulic Ijdjva H Amopfx Adnoa

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, General Data Measurements width 1264 mm Measurements depth 4308 mm Iodpfsw Efy Tsx Adnsa Measurements height 1779 mm Machine weight 4200 kg Injection Unit Screw diameter 25 mm Shot weight 46 g Heating capacity 5.7 kW Nozzle pressure 30 kN Clamping Unit Clamping force 500 kN Max open daylight 710 mm Distance between bars 370 x 370 mm Mould height min 200 mm Mould height max 410 mm Ejector stroke 90 mm Ejector force for / back 25 kN Additional Equipment Granule Dryer Handling System Conveyor Belt - 1400 mm x 400 mm Precision Scale Temperature Units - 2x HB‑Therm General Data Measurements width 1264 mm Measurements depth 4308 mm Measurements height 1779 mm Machine weight 4200 kg Injection Unit Screw diameter 25 mm Shot weight 46 g Heating capacity 5.7 kW Nozzle pressure 30 kN Clamping Unit Clamping force 500 kN Max open daylight 710 mm Distance between bars 370 x 370 mm Mould height min 200 mm Mould height max 410 mm Ejector stroke 90 mm Ejector force for / back 25 kN Additional Equipment Granule Dryer Handling System Conveyor Belt - 1400 mm x 400 mm Precision Scale Temperature Units - 2x HB‑Therm This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, Year of construction: 2001, Clamping force: 250 t Screw diameter: 70 mm Distance between tie bars V: 630 mm Iedpfx Adevbbvkonoa Distance between tie bars H: 630 mm Core pullers: 2x Air valve: 1x Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2008, clamping force: 5,000 kN, Demag System 500/900-3300 (2008) Clamping unit Clamping force: 500 tons Platten dimension: 1300 x 1200 mm Distance between tie bars: 900 x 800 mm Isdswv Uykepfx Adnja Mold height min. : 440 mm Mold height max. 880 mm Injection unit Screw diameter: 80 mm Injection pressure: 1855 bar Injection volume: 1779 cm3 Shot weight: 1620 g Transport dimensions Dimensions: 8,7 m x 2.3 m x 2,5 m Weight (clamping unit/injection unit): 16.500/5.400 kg 4x Core pullers Cascade control 2-way hydraulic EUROMAP 67 interface Additional connections for 2 core pulls on the fixed tool clamping plate 10-way cooling water flow regulator with temperature display Additional nozzle controller; 1 circuit; PID controller

Year of construction: 1978, condition: used, machine/vehicle number: NBGMAN 3, Technical data: 1 Abus VS column slewing crane NL 1000 KG Payload at full radius 1000 KG / 1 ton payload Height: approx. 3.65m, UK boom: approx. 3.27m Projection: approx. 5m, hook height: approx. 2.75m Weight completely approx. 1000 kg including 1000KG Abus GM chain hoist (BJ2008) with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 360° Test book is available Crane is dismantled and available immediately Item location is 75053 Gondelsheim Iodpfxjr Igtyj Adnsa Only the crane system shown in the pictures is sold Very good condition, see pictures Shipping by courier or collection by appointment

Condition: excellent (used), Year of construction: 2003, Demag Ergotic system Iedpfx Aor Avfnjdnja Closing 35 tons Year of manufacture 2003

Condition: used, Demag Ergocontrol, 4 MB- for NC4 control system - removed from Demag ET 6 system - removed from running machine - fully functionalmanufacturer: Demag Ijdpfx Aderr Ehmsnea spare part no.: 7If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht