Used Demag Ac 40 City for sale (507)

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, General Data Measurements width 1264 mm Measurements depth 4308 mm Measurements height 1779 mm Machine weight 4200 kg Fjdjx D Eccspfx Aa Esfw Injection Unit Screw diameter 25 mm Shot weight 46 g Heating capacity 5.7 kW Nozzle pressure 30 kN Clamping Unit Clamping force 500 kN Max open daylight 710 mm Distance between bars 370 x 370 mm Mould height min 200 mm Mould height max 410 mm Ejector stroke 90 mm Ejector force for / back 25 kN Additional Equipment Granule Dryer Handling System Conveyor Belt - 1400 mm x 400 mm Precision Scale Temperature Units - 2x HB‑Therm This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2013, operating hours: 27,551 h, clamping force: 2,200 kN, total height: 2,100 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Additional equipment • Sepro Robot SDR 22 Fedpfx Ajx D Hnyoa Eofw Machine Benefits Technical Machine Benefits • Screw diameter: 45 mm / screw geometry: standard / l/d ratio: 20 / specific injection pressure: 2150 bar / maximum shot volume: 329 cm³ / maximum shot weight: 293 g / injection rate without accumulator: 254 cm³/s • Dosing stroke: 207 mm / maximum nozzle stroke: 450 mm / nozzle immersion depth: 20 mm / nozzle contact force: 58 kn / number of heating zones: 4 / hopper capacity: 50 l / maximum injection speed: 160 mm/s • Holding force: 2420 kn / maximum opening stroke: 550 mm / minimum mold height: 300 mm / maximum mold height: 580 mm / maximum platen distance: 1130 mm • Mold clamping plates (hxv): 880x830 mm / clearance between tie bars (hxv): 610x560 mm / ejector stroke: 150 mm / ejector force: 58 kn • Dry cycle time according to euromap 6 (stroke): 427 mm • Net weight without oil: 10100 kg Dimensions Machine Depth 6460 mm

Condition: ready for operation (used), Year of construction: 2003, operating hours: 96,986 h, clamping force: 600 kN, screw diameter: 30 mm, This DEMAG ET60-200 concept hydraulic injection moulding machine was manufactured in 2003. It features a clamping force of 600 kN and a maximum mold weight of 580 kg. The machine includes a robust injection unit with a screw diameter of 30 mm and an injection pressure of 1900 bar. Consider the opportunity to buy this DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further details. • Clamping unit: • Tie bar spacing (H x V): 420 x 420 mm • Platen dimensions (H x V): 530 x 540 mm • Min. mold installation height: 210 mm • Opening stroke: 400 mm • Max. mold weight: 580 kg (moving side 380 kg / fixed side 200 kg) Ffsdpfx Aaeyg Nfuo Eew • Ejector: • Stroke: 125 mm • Force: 41 kN • Retraction force: 15 kN • Pneumatic ejector: Yes • Core pull control: Yes (2 units, on the ejector side/AS) • Injection unit 1: • Unit size: 200 • Screw diameter: 30 mm • Injection pressure: 1900 bar • Stroke volume: 106 ccm • Shot weight (PS): 94 g • Screw L/D: 20 • Nozzle radius: 15 mm • Armored/wear-resistant injection unit: Yes • Process control: SPC (Yes) • Note: Maximum crane load warning: 2 metric tons Additional equipment • Robot/removal device: W621-1381 • Travel paths: Y 1200 mm, X 550 mm, Z 1500 mm • Hot runner controller: 7-zone integrated control • Mold sensors: Kistler (p=1/t=0)

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. • 5x similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mold movement • Chromed tie bars on clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate mains connections for drive and heating • Control: color data display with VGA interface and AT keyboard interface • Injection, holding pressure, and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mold and oil cooling • Compliance: Basic version Europe, according to valid safety regulations • Painting: Bottom anthracite grey RAL 7016; Top blue 571C MD • Elastic machine mounting • Ultrasonic displacement measuring system with digital data transmission for injection, ejector, mold (WZ), and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centering diameter (D=100/125) for fixed mold platen • Mold connection dimensions type E (similar to EUROMAP), without side ejector plate • Standard mold installation height • Safety interlock: mold opening and ejector forward only with closed safety door • Ejector with position control via proportional valve; pressure and velocity independently programmable • Electric screw drive, frequency-controlled Ffedpfxsx D Rqro Aa Ejw

Condition: ready for operation (used), Year of construction: 1995, operating hours: 122,158 h, clamping force: 3,300 kN, screw diameter: 60 mm, This DEMAG ET 330 - 1450 hydraulic injection moulding machine was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine includes a Wittmann W322-121 linear robot for enhanced automation. Consider the opportunity to buy this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details. • Clamping unit: • Locking force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Mold installation height: min 330 mm / max 830 mm • Opening stroke: 675 mm • Platen distance (daylight): 1505 mm • Permissible mold weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN • Core pull control: yes (2 units, on ejector side/AS) • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection unit 1: • Unit code: 1450-60 • Screw diameter: 60 mm • Injection pressure: 1905 bar • Stroke volume: 763 ccm • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Max dosing stroke: 270 mm • Plasticizing flow: 41 g/s • Configuration/controls: • Armored (wear-resistant) injection unit: yes • Pneumatic ejector: yes • Process control: SPC (Yes/Yes) Fodpjyg Nkwsfx Aa Eefw • Printer interface: integrated • Hot runner control: 0-zone (none) • Maintenance: • Hose replacement performed in 2017 Additional equipment • Wittmann W322-121 CNC linear robot/removal device (included with the machine) • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), overall weight: 25,340 kg, This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for tact us for more information. Additional information • Screw Diameter: 50 mm • Maximum Dosing Volume: 530 cc • Cycles: 12875090 • Tiebar Spacing: 820 mm • Clamping Force: 3500 kN Ffjdox D Nxzjpfx Aa Eow

Condition: used, Wall-mounted slewing jib crane DEMAG type KBK 2 Demag no. jib: KBK- 982 040 44 Demag no. wall bracket : 85104044 Year of construction 2000 Lifting capacity: 500 kg Outreach: 4000 mm Swivel range 270° Ffodstqwrvepfx Aa Esw Wall mounting plate: 1170 x 440 mm Height of lower boom to upper wall bracket: 1000 mm Flange plate wall bracket to center of bolt: 270 mm Total length of wall bracket flange plate to jib tip: 4330 mm: - Cantilever profile C-profile scissor lift DEMAG KBK 2 - Carriage for DEMAG KBK 2 C-profile trolley - Original paint yellow dead weight 170 kg very good condition Price without chain hoist - chain hoist or crane can also be found in the store.

Condition: good (used), functionality: fully functional, Year of construction: 1992, main lifting speed: 12,000 mm/min, fine lifting speed: 2,000 mm/s, -KOM 3160- Offered here is a Demag industrial lifting crane. This crane can lift loads up to 80 kg. In addition to the crane, you will receive the corresponding motor unit including the chain hoist, consisting of the chain and hook block. The dimensions can be found in the last image. The inspection logbook will be provided upon purchase. Ffodpfexcnmnox Aa Esw Type: PM V8 V1 F6 Year of manufacture: 1992 Number of load strands: 1 Main lifting speed (m/min): 12 Fine lifting speed (m/min): 2 kW: 0.2 / 0.03 Protection class: IP 54

Condition: good (used), functionality: fully functional, -KOM 3161- Offered here is a Demag lifting crane. The crane can lift up to 80 kg. In addition to the crane, you will receive the corresponding motor unit including the chain hoist, consisting of the chain and hook block. The dimensions are shown in the last picture. You will receive the inspection book upon purchase. Fsdpsxcnvpefx Aa Eefw Unfortunately, the nameplate of the drive unit is no longer available.

Condition: refurbished (used), DEMAG DH 316 H12 Load capacity: 3.2 t Hook lift height: 12.0 m Fedpfx Aoytp Ehea Eofw

Condition: new, functionality: fully functional, crane hoist parts for hoist type DH500 / DH1000 Lifting motor KBH140 B4 Lifting motor KBH140 B2/12 Lifting motor KBH160 B4 Lifting motor KBH200 B4 for hoist P-Zug Lifting motor 24/10 K4P Lifting motor 24/14 K4P Fjdpov Uu T Nsfx Aa Eofw Lifting motor 28/12 K4P Lifting motor 36/20 K6P Lifting motor 36/24 K6P Fine reduction gear FG08 FG10 Wire rope drums, casing, rope guides Info: We have over 20,000 DEMAG spare parts in stock! Check out my other offers from our warehouse inventory!

Condition: good (used), Year of construction: 2026, A total of 30 chain hoists from business closure for sale Lifting capacity: 500 - 1,400 kg (mixed) All 30 units are functional, plus 2 units for spare parts Fsdoyplu Djpfx Aa Ejfw Includes 5 trolleys

Condition: ready for operation (used), load capacity: 10,000 kg, empty load weight: 3,500 kg, Demag DH-takel: EZDH 325 H12 K-V2-4/1 F10 Kind of: overhead travelling crane Span: 11 360 mm Tackle speed: 0,4 & 4 m/min Rotationspeed: 8 & 31 m/min Ffsdpfjxq Hqnjx Aa Esw Displacementspeed: 10 & 40 m/min Numbre of riggers: double rigger

Condition: ready for operation (used), load capacity: 6,300 kg, Demag 6,3 ton x 11 410 mm Kind of: overhead travelling crane Span: 11 410 mm Radiocontrol: no radio control Fjdpfx Aowu Inxea Eefw Numbre of riggers: double rigger

Condition: ready for operation (used), load capacity: 10,000 kg, empty load weight: 4,850 kg, Demag EKDH 625 H20 K-V2-4/1-F6 Kind of: overhead travelling crane Fedpfxoxq Hque Aa Ejfw Span: 14 300 mm Tackle speed: 0,6 > 4 m/min Rotationspeed: 5 > 20 m/min Displacementspeed: 6,3 > 40 m/min Numbre of riggers: single rigger

Condition: ready for operation (used), load capacity: 32,000 kg, empty load weight: 38,000 kg, lifting height: 12,200 mm, Demag DH-takel met digitale weegschaal breedte: 6008 mm hoogte van de hoofdligger: 1500 mm hoogte van de takel bovenop de balk: 1210 mm Kind of: overhead travelling crane Span: 25 meter Fedpfx Ajv Sfrwja Eefw Tackle speed: 6,3 / 12,6 m/min Rotationspeed: 10 / 34 m/min Displacementspeed: 10 / 100 m/min Numbre of riggers: double girder

Condition: used, Year of construction: 2014, clamping force: 6,500 kN, Demag System 200/500 This Sumitomo Demag injection moulding machine Systec 650/1020-2300 from 2014 is being auctioned—including the conveying system and a hot stamping unit—in our industrial auction, "Injection Moulding Machines – DEMAG System, KraussMaffei, Sumitomo," taking place in Babenhausen until 10.03. The auction is held on our RESTLOS online platform. Machine inspections can be scheduled by appointment for Monday, 09.03.2026 from 10:00 to 11:00 am. Further details about the machine: Complete large-scale injection moulding system, consisting of a Sumitomo (SHI) Demag injection moulding machine, Sepro top-entry linear robot, Stäubli clamping and coupling systems, hot stamping/foil transfer station, as well as comprehensive temperature control and conveying equipment. Technical data Injection moulding machine Manufacturer: Sumitomo (SHI) Demag Model: Systec 650/1020-2300 Year of manufacture: 2014 Machine number: 80930051 Control unit: NC5 Plus Clamping force: 6,500 kN (650 t) Ffedpfxjyn Acpj Aa Ejw Tie-bar distance: 1,020 mm Injection unit: 2300 Screw diameter: 60 mm L/D ratio: 20 : 1 Voltage: 400 V / 50 Hz Operating hours: PLC: approx. 103,846 h Drives: approx. 50,889 h Heater: approx. 71,072 h Machine cycles: approx. 4,942,086 Linear Robot / Part Handling Manufacturer: Sepro Robotique / Sumitomo Demag Model: S5X-35 Year of manufacture: 2014 Weight: approx. 711 kg Max. pressure: 7 bar Type: top-entry linear robot (X, Y, Z axes with rotary axes) Operation: Sepro teach pendant / Integration into NC5 control Further automation components - Stäubli QMC122 magnetic quick-clamping plates (2 units) - Stäubli multi-coupling systems for media connections - Stäubli industrial robots (TX/RX series, handling) - Hot stamping/foil transfer station with rotary table and Siemens SIMATIC HMI - Priamus FillControl process monitoring system - Gammaflux hot runner controller - Dr. Escherich ESUC 81 ionization/cleaning unit Temperature control & material handling - Multiple Wittmann Tempro plus D140 temperature control units (approx. 10–12 units) - Chilled water manifold plates with flow indicators - Koch Technik H565 material loader - Koch Technik SGM01 metal separator Conveying equipment - M.A.i conveyor belt for part discharge - VTW conveyor belt for sprue discharge Key components overview: - Sumitomo (SHI) Demag Systec 650/1020-2300 injection moulding machine - Sepro S5X-35 linear robot with control system - Stäubli quick-clamping and coupling systems - Hot stamping/foil transfer automation cell - Process monitoring system (Priamus) - Hot runner control (Gammaflux) - Wittmann temperature control units - Koch material handling equipment - Part and sprue conveyor belts Notes - Please make use of the inspection appointment - Without moulds, materials, and decorations unless explicitly mentioned - Dismantling and loading to be handled by the buyer - Sold as pictured; functionality untested - Does not include any other items that may be shown in images - Completeness not verified.

Condition: excellent (used), functionality: fully functional, DEMAG P2000 / P1600 25t Main hoist motor 36/24 K6P 36/20 K6P, fine travel FG 35, wire rope guide, rope drum, drum shell, hoisting gearbox Significantly below manufacturer's list price Top condition Also suitable for P1000 / P1200 P600 P400 P200 Info: We have over 20,000 DEMAG spare parts in stock! Over 20,000 DEMAG spare parts in warehouse! Ffodpfx Aov Uvvfsa Eow Be sure to check my other offers from stock!

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Hersteller: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Ffjdpfx Aaoxhfuaj Eew Producer: Wittmann Type: W721-0231 Year: 2005

Condition: used, Year of construction: 1978, arm length 5500 mm weight max. in kg 250 kg height 3800 mm Lifting height 3800 mm Crane number 1.30 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Ffsdpfxeyqvlie Aa Esw About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, arm length 6000 mm weight max. in kg 250 kg swivelling range . Grad height 3800 mm Crane number 1.26 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Ffedpjyqvcujfx Aa Eew

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request Ffsdpfx Ajymqz Rea Eew terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2005, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Fjdpfx Ajymqz Doa Ejfw

Condition: used, Year of construction: 2005, clamping force: 110 kN, displacement volume: 398 cm³, injection pressure: 1,550 bar, overall weight: 5,700 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request Ffsdpjymqzqefx Aa Esw terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2005, clamping force: 110 kN, displacement volume: 398 cm³, injection pressure: 1,550 bar, overall weight: 5,700 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request Ffedpfx Aaoymqzko Eow terms of payment: 100% prior to delivery