Used Defigard 2002 for sale (883)

Condition: excellent (used), Year of construction: 2002, Arburg 320S 350-150 (2002) Clamping force: 35 ton Plate size: 455x455 mm Nwjdpswmqx Rjfx Ah Heb Tie bar distance: 320x320 mm Maximum daylight : 575 mm Screw dia: 30mm (up to 30%glass resistant)

Condition: used, mileage: 796,179 km, power: 338 kW (459.55 HP), first registration: 05/2002, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: blue, gearing type: mechanical, emission class: euro3, Equipment: ABS, Tel.: Call (Contact · Telephone · Mobile · WhatsApp) Special equipment: Car phone antenna, work lights (2) on cab roof, wide-angle exterior mirror and electrically adjustable and heated, left-hand side, mechanical battery master switch, operating hours counter, kerb mirror right electrically adjustable and heated, rear axle differential lock, front axle parking brake pneumatic, flame start system, cool box, reading lights for driver and passenger, radio pre-installation 12V, external sun visor, sound system, cab socket 24V, 2-pin, control module for external data exchange Additional equipment: Nwedpfx Aon Rx N Tjh Hob Axle configuration: 4x2, front axle load 8.0 t, trailer socket 24V / 7-pin, trailer ABS socket, anti-slip regulation (ASR), exterior mirrors electrically adjustable and heated, wide-angle exterior mirror and electrically adjustable and heated, right-hand side, battery 175 Ah, battery box, onboard computer MAN-Tronic, electronic braking system MAN-Brakematic, EURO 3 engine, cabin: LX, comfort driver's seat, tachograph, suspension: leaf / air, electric window lift, generator 100 A, speed limiter system 80 / 85 km/h, transmission 16-speed - Type: ZF 16 S, Comfortshift, rear axle HY-1350, body/chassis: chassis frame, tipper linkage - EVB brake, adjustable steering column (steering wheel), headlamp levelling, 2-cylinder air compressor, engine 12.8 L - 338 kW diesel, pollen filter, rear axle disc brake, front axle disc brake, side under-run protection, sun blind for windscreen, front axle stabilizer, bumper in plastic design, traverse for trailer coupling, rear underrun protection, front axle VOK-08 cranked, electronic immobilizer, central locking, permissible total weight 18.00 t * Man TGA 18.463 FLC 4x2 * Skip loader * Manual transmission * Retarder * Front leaf-sprung * Rear air suspension * VIN: WMAH05ZZZ2M347337 * Engine type: D2876LF04 * Kw: 338 * Euro 3 * Displacement: 12,816 cc * Unladen weight: 10,940 kg * Payload: 6,900 kg * Gross vehicle weight: 18,000 kg * Wheelbase: 3,900 mm * Vehicle length: 6,950 mm * Vehicle width: 2,550 mm * Vehicle height: 3,600 mm * Tires: 385 / 65 R 22.5 * New turbo installed! * All information without guarantee.

Condition: used, Year of construction: 2002, Weinig four-sided planer max. planing width 230mm max. planing height 120mm Digital positioning 5 stations + 1 output unit for rounding or chamfering Total power 43kw Nsdpfxjxg Nbus Ah Hewb 380V

Condition: as good as new (ex-display), Heating: steam Control panel: ADITEC Base width: 157 cm Base depth: 240 cm Nwsdpfx Ahephnz Nj Hsb Corpus height: 264 cm Min. room height: 320 cm Recommended room height: 330 cm Smoke-trolley dimensions (HxWxD), cm: 200x100x100 Connected load for HP heating: 60,5 kW Smoke generator width: 50,0 cm

Year of construction: 2002, condition: used, 2002 Camam US/1C Chair Leg Equalizer. Njdevcc Rlspfx Ah Hswb Bench cm. 70x70

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, TECHNICAL DESCRIPTION EWAG 6-axes CNC Tool Grinding Machine Ewamatic Line. Nwjdpfx Ahjv Tbfps Hob Make : EWAG Type: Ewamatic Line ERS - SK2000 Year: 2002 Control type: CNC Control: NUM 1050 Origin: Switzerland Weight of the machine approx. 4 t Dimensions of the machine approx. 2365 x 2920 x 2810 mm Travels: Cross axis X 360 mm Height adjustment Y 150 mm Infeed axis Z 230 mm Swiveling axis B +/-120 deg. Tilt axis A: -15...+25 deg. Dividing attachment with cylindrical grinding mode HSK63 clamping variant (C-axis1000 rpm) 6-station turret grinding head tiltable: Grinding spindle Ø 80 mm, number 6, arranged in a star shape Grinding wheels Ø max. 250 mm Grinding spindle drive 7.5 kW, speed 12000 rpm. RENISHAW 3D Measuring station Dressing device for automatic stone dressing of diamond and CBN grinding wheels Coolant equipment With oil-mist extractor Donaldson

Condition: used, Year of construction: 2002, Approx. 1.6 million cuts Table left Air table right Nedpfxew N R Ehs Ah Hjwb short-term available

Condition: used, Year of construction: 2002, Hyster h4.00xm Bj 2002 Nedpsxbr Tiefx Ah Hswb Hours 7000 Triplex .

Condition: used, Year of construction: 2002, Station 1 Disengagement: Max. sheet thickness: 6 mm steel, 4 mm stainless steel Fixed 90 degree angle with stops Blade length 225 mm Station 2 Cutting: Max. cutting width: 25 mm in one cut at 100 mm cutting depth Nwsdpfx Ahjwx Iwno Hjb Max. sheet thickness: 4 mm steel Weight: 800 kg

Condition: used, Year of construction: 2002, Die-cutter Iberica JRK-105 Year: 2002 Description: Nedpfxev Rci Ds Ah Hewb Stripping unit Blanking unit Technical specifications: Maximum sheet size: 750 x 1050 mm Minimum sheet size: 350 x 400 mm Minimum paper thickness (according to quality):90 – 95 g/m2 Maximum cardboard thickness: 1.5 mm Maximum corrugated board thickness: 3 mm Maximum operational pressure: 300 T Maximum speed: 8500 sheets/hour Main drive motor with variable speed: 20 CV (15 KW) Total power installed: 43 CV (32 KW) Air required pressure: 6 KG / CM2 Machine appr. Weight: 23.600 KG Floor space occupied: length 10.10 M. width 6.26 M. height 3.30 M.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 01 - 346, year of last overhaul: 2025, PRODUCTION LINE FOR THE PRODUCTION OF 330 X 330 MM AND 250 X 250 MM ¼ FOLD NAPKINS 1. Single shaftless unwinder for reels up to: 1500 mm with lift • intake for roll core R 70 or 76 mm • max roll weight 350 kg • single motor drive with multi-V-belt • drive speed controlled by dancer • automatic machine stop at reel end • dust removal system 2. Calendering Unit • for equalizing the tissue thickness, reducing of dust, and improving the printing quality - Ø 254 mm • single motor drive • hardened and ground cylinders • Web tension measuring roller for single drive control with mechanical stop 3. Web Aligner No. AND • BST web aligner positioned in front of printing station 4. Flexographic Printing Press • 2 printing tower frames for max eight (8) printing units • s-wrap pull rollers and guide roller • moveable operating platform for operating the printing units • push-button operator panel • maximum format range 500 mm 2 • single drive for each printing unit • motorized 360° radial register • angle synchronizer • quick-change device for plate cylinder. • integrated quick-change device with air support for printing plate sleeves • ceramic coated anilox roller • 2 sets mounting cylinders – for 330mm (Lunch) and 500 mm (cocktail) napkins formats • ink level detector with acoustic or visual alarm • lifting and dropping of ink trays • protection covers, safety switches 5. Web Inspection Device Type BST with S-VGA Monitor 6.Infrared Drying Equipment • two drying infra-red cassettes • drying cassettes separately adjustable • cassette cooling by integrated fans (with temperature control) • automatic shut-off and lifting upon print end machine stop 7. BST Web Aligner No. II for embossing 8. Double embossing station • two-position embossing station • two sets rollers for embosiing – Formats: Lunch 330x330mm, cocktail 250x250mm 9. Folding frame 10. ¼ Folding Head 11. Manual product transfer to the packaging machine. 12. Electrical Equipment TECHNICAL DATA Max printing speed: 300m/min Real speed printing: 200 – 230 m/min Supply voltage: 230 / 400 V, 3 – phases + PE, 50 Hz Control – Siemens S7 Max Power 93 KW. 3 PACKING MACHINE Producer: Senning Nwodpfx Ahewnxgle Hsb Model: 522 SE/M-30 Serial number: 71,155 Production date: 2002 Formats: • Lunch 330 x330 mm ¼ folded • cocktail 250 x 250 mm 1/4 folded • minimum package height 18mm • maximum package height 40 mm. TECHNICAL DATA Maximum packing speed: 30 packs/min Standard packing speed: 30 packs/min Foil material: • Polyethylene (PE) – 35-40um • Polypropylene (OPP) – 22-28um • Polypropylene (PP) 35-40 um. • Core from foil diameter – 76 mm ELECTRICAL DATA Supply voltage: 230 / 400 V, 3 – phases + PE, 50 Hz Max power 20 KW.

Condition: excellent (used), Year of construction: 2022, MAUTING smokehouses for 2 smoke trolleys. Type - UKM 2002.E-LP / UKM 2002.E-L. UKM 2002.E-LP. Year - 2022/4. Price - 320,000 DKK / €43,000. UKM 2002.E-L. Year - 2016. Power kW - 67.5 kW. Current A - 101. Price - 235,000 DKK / €31,500. Sold EX Works. Has used liquid smoke. TJ. Nwjdpfjtmf Ayjx Ah Heb

Condition: ready for operation (used), 1 x stitching unit 1558 6 x section feeders 1559 Nwodoir A D Repfx Ah Hsb 1 x cover feeder 1528 1 x three knife trimmer 1522 1 x stream delivery 225

Condition: ready for operation (used), IN STOCK - 4/5th knife attachment for a MM 360 trimmer Nwsdpsir E R Hjfx Ah Heb

Condition: excellent (used), Year of construction: 2015, Manufacturer: Veritherm Type: SSK200 Year of construction:2015 Nominal heat output: 220kW Мы говорим по русски! Nwjdpfx Ahetuwn Ro Hsb Viewing please only by telephone arrangement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: excellent (used), Stair Tensioner (28366) Clamping height 200 - 250 mm Nwodpfx Asln Ulash Hjb T grooves width 12 mm Clamping screw M 10 4 pieces available Weight 8,5 kg

Condition: good (used), We offer for sale a Heraeus heating and drying oven. Heraeus heating and drying oven Nodpfx Ajvzqyfeh Howb manufacturer HERAEUS Type: 6200 condition: Used in good condition air mixing oven: up to 250°C Internal volume: 180 liters temperature controller and timer air mixing voltage: 2800watt 1 phase 230volt 50Hz 12.3A IP20 External housing: width 800 mm, length 890mm, height 810 mm. Internal dimensions: width 510 mm, length 550 mm, height 650 mm weight: 100kg

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Nwjdpfx Aeyctx Rsh Heb Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) The machine is designed for operation with an electric turntable. The machine has an inverter to control the servomotor in the rotary table and an interface for connecting the rotary table Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 1999, operating hours: 12,396 h, clamping force: 4,200 kN, screw diameter: 70 mm, This DEMAG Ergotech 4200-2300 was manufactured in 1998. It is a hydraulic injection moulding machine featuring a clamping force of 4200 Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 4200-2300 hydraulic injection moulding machine. Contact us for more information. Njdjx D Hyvspfx Ah Hjwb • Witmann included

Condition: good (used), Year of construction: 2007, Robot Industrial Robot Kuka KUKA KR200-2 Comp KRC2ed05 Year of manufacture 2007 Reach 2400 mm Weight 1267 kg Payload 200 kg Nwedpjdv Dx Djfx Ah Heb Controller KRC2ed05 Controller weight 185 kg Processor 2GHz Language WinXP Software version V5.6.6 Teach pendant Kuka KCP2ed05 Connection cables 7m/15m Several units in stock, orange! 22126ä

Condition: used, mileage: 87,000 km, power: 353 kW (479.95 HP), first registration: 08/2012, fuel type: diesel, empty load weight: 25,500 kg, maximum load weight: 500 kg, overall weight: 26,000 kg, tire size: 385/65/315/80 R 22,5, axle configuration: 6x4, wheelbase: 3,200 mm, next inspection (TÜV): 08/2026, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, front tire size: 385/65R22,5, rear tire size: 315/80R22,5, Equipment: ABS, additional headlights, air conditioning, cabin, cable winch, central locking, crane, differential lock, trailer coupling, Vehicle location: incoming / in transit, company premises, 1x air suspension seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, ABS (anti-lock braking system), differential lock, work lights, rotating beacon, winch, leaf suspension, mid-mounted crane, emergency stop, grapple control, foldable, 4-point hydraulic outriggers, radio remote control, 8x hydraulic extensions, jib. Wheelbase: 3200 mm. Body: Palfinger PK 92002 SH with Jib 125-E, at 37m – 680kg, foldable, radio, auxiliary loading platform LEITNER LENGAU. Load chart: 4m – 17,400kg, 6m – 12,500kg, 12m – 5,900kg, 16m – 4,050kg, 20m – 3,100kg plus jib 125 PJ-E, 6x hydraulic, 37m – 680kg. 5.082 crane, cross beam stabilizers, Kinshofer pallet fork 2,000 kg. Location: currently Southern Germany. Data subject to reservation, as vehicle is incoming! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE; subject to change, prior sale, and errors! Nedpfeydmt Rox Ah Hswb

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, empty load weight: 14,835 kg, maximum load weight: 11,085 kg, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 6,300 mm, loading space width: 2,480 mm, loading space height: 900 mm, number of beds: 1, Equipment: ABS, air conditioning, central locking, compressed air brake, crane, cruise control, differential lock, fog lights, onboard computer, parking heater, truck registration, Volvo FH 500 6x2 flatbed truck with Palfinger crane and radio remote control | I-Shift, retarder | Axle weigh scale | LED headlights | 5 hydraulic extensions | Automatic transmission, EURO 6 | Trailer coupling | Heated seats, auxiliary heater, air conditioning, refrigerator | Cruise control, electric windows, electric mirrors | Steering axle + lift axle | Tires: 385/55/R22.5 | Loading dimensions: L: 6.30m, W: 2.48m, side wall height 0.90m | Total length: 10.12 meters, mass A: 10.00 meters | Subject to errors, input mistakes and prior sale. Nodjya Ncmopfx Ah Hewb

Condition: new, Empty weight: 240.000 kg Cargo space capacity: 3.000.000 l Productivity: 120 tph FULL AUTOMATIC TOWER ASPHALT PLANT 1.1 COLD AGGREGATE FFEDING CHASSIS(6*12m3) 6 1.2 Feeding bunkers and dosage conveyor bands 1+1 1.3 Collector and dryer mounted on the feeding conveyor band 1 1.4 STATIONARY CHASSIS 1 1.5 ROTARY DRYER GROUP 1 1.6 Dryer body 1 1.7 Aggregate inlet head 1 1.8 Aggregate outlet head 1 1.9 Burner group (BALTUR) 1SET 1.10 Burner fuel pump 1 1.11 Burner blower fan 1 1.12 Elevator inlet 1 2.1 MIXER CHASSIS GROUP 1 2.2 Asphalt Mixer + Hot Aggregate Elevator 1 2.3 Aggregate weighing scale bunker 1 2.4 Filler Elevator and Weighing scale bunker 1 2.5 Filler Screw Conveyor 1 2.6 Bitumen weighing scale bunker 1 2.7 Mixer bitumen pump 1 2.8 Undersize hot aggregate silo(50T) 3 2.9 Filler stock silo 25 M3 2 2.10 Vibration Screen 1 3 DUST COLLECTING FILTER SET 3.1 Jet-Pulse filter body 1 Set 3.2 Nomex filter bag and cartridges 1 Set 3.3 Dust collector V spiral and bunker 1+1 Set 3.4 Filler silo(25Tons) 2 Set 3.5 Filler Screw Conveyor 2 Set 3.6 Filter absorption fan 1Set 3.7 Dirty gas channel 1 Set 3.8 Chassis group 1 Set 4 BITUMEN STOCK TANK 4.1 50 Ton capacity boiling oil heating isolation bitumen tank(One for PMB)With Stirrer(Vertical) 3 SET 4.2 3 way pneumatic jacket valve group 2 SET 4.3 Mixer bitumen feeding pump 1 SET 4.5 Mixer bitumen weighing scale feeding pipe line 1 SET 4.6 Bitumen transfer pump 1 SET 4.7 Double wall bitumen pipe installations 1 SET 4.8 50 Ton capacity boiling oil heating isolation bitumen tank 1 SET 4.9 3 way pneumatic jacket valve group 2 SET 5 FUEL AND THERMAK GENERATOR CHASSIS GROUP 5.1 1.000.000 kcal/h capacity Thermal oil generator 1 SET 5.2 Boiling oil heating boiler 1 SET 5.3 Boiling oil circulation pump 1 SET 5.4 Fuel replenishing pump 1 SET 5.5 Fueling pump 1 SET 5.6 Automation-Control Cabin-Software-Compressor 1 SET 6 Granulator Feeder(Fiber Feeding with fan drive) 1 SET 7. Col Asphalt Recycling System(5m3 Hopper Feeder,500x22000mm Belt Conveyor,800x4000mm Belt Conveyor with Weighing System) 1 SET 8. Cladding(3 mm Deck Sheet on 50x50 Box Profile Coating) for Aggregate Hopper and Mixer Floor 1 SET 9. Real Time Gas Emission Measuring and Monitoring System(Integrated with PLC and Plant Automation)(Obserable by internet Connection) 1 SET 10. Dust Monitor PCE-PQC 23US Incl. Calibration Certificate 1 SET Nsdpfx Ahox D Dfis Howb

Year of construction: 2014, operating hours: 39,176 h, condition: ready for operation (used), total height: 4,000 mm, product length (max.): 8,700 mm, This FERROMATIK K-TEC 200 2F was manufactured in 2014. A robust hydraulic injection moulding machine, it features a screw diameter of 18 mm and a clamping force of 200 KN. Ideal for working with materials like ABS and PC, it operates on 400V and 50Hz, ensuring efficient performance. Dimensions are 8700mm in length, 2300mm in width, and 4000mm in height. Consider the opportunity to buy this FERROMATIK K-TEC 200 2F hydraulic injection moulding machine. Contact us for more information. Njdpfx Ahoyabtde Hjwb • Clamping Force 200 KN • Screw Diameter: 18 mm • Previous Material Use: ABS, PC • Turning System (HxV): 750 x 750 mm • Power Rating: 192 KW • Voltage: 400V, 50Hz Dimensions Machine Depth 2300 mm

Year of construction: 2007, operating hours: 64,000 h, condition: ready for operation (used), overall weight: 25,000 kg, total height: 4,000 mm, product length (max.): 8,700 mm, This FERROMATIK K-TEC 200 2F was manufactured in 2007. A robust hydraulic injection moulding machine, it features a clamping force of 200 kN and a screw diameter of 18 mm. It has processed materials like ABS and PC, and includes attachments such as dryers and temperature control units. Dimensions are 8700x2300x4000 mm, and it weighs approximately 25,000 kg. Consider the opportunity to buy this FERROMATIK K-TEC 200 2F hydraulic injection moulding machine. Contact us for more information. • Force: 200 kN • Injection Unit Size: 111 • Screw Diameter: 18 mm • Power Rating: 192 kW Nwsdpfox Uqtkox Ah Hob • Current: 308 A • Voltage: 400 V • Frequency: 50 Hz • Operating Pressure: 6–8 bar • Attachments / Peripherals: 4 Dryers CARD • Handling systems with Denso robots • Temperature Control Units: 6 • Treat Stations: 2 Dimensions Machine Depth 2300 mm