2002 MEBER SAR600

MEBER SAR600

Condition: new, ELMAG STBS-500 masonry band saw STBS for dry cutting (bricks, aerated concrete, insulating material) Kedot Egfzopfx Ad Nswt The STBS series masonry band saws are specially designed for use designed for use on construction sites. In dry cutting, they are suitable for the precise processing of materials such as aerated concrete, bricks, lightweight poroton, expanded clay and wood, but also for insulation boards such as Styrofoam and Styrodur. ADVANTAGES Connection piece for dust extraction available Saw blade tension easily and optimally adjustable with handwheel Includes forklift pockets and lifting eye Constant saw blade tension and 440 mm running wheels for reduced risk of blade breakage and precise cuts Direct drive with geared motor on extra motor console Automatic saw blade switch-off at the end of the cut Machine stops when the doors are opened Short saw blade change times Straight, miter and manual contour cuts possible Precise band guide, adjustable to the block height Easy relocation thanks to transport wheels and transport bar TECHNICAL DATA Cutting height 500 mm Cutting length 660 mm Angle 0 - 45 ° Saw blade dimensions 3850x27 mm Table size 710x1060 mm Rated power 1.85 kW Mains connection 230/50 V/Hz Dimensions 1050x900x1840 mm Weight 203 kg

Condition: used, Wheel diameter: 500 mm Storage location: Nattheim Kedjwl D S Ujpfx Ad Njwt

Condition: reconditioned (used), reinforced gray cast iron table, tiltable balanced cast iron wheels precise upper & lower blade guide Kwsdpov Dg A Uofx Ad Nst Work table dimensions approx. 680 x 580 mm Cast iron wheel diameter 600 mm Max. cutting height 340 mm Max. cutting width approx. 540 mm Three-phase motor approx. 2.2 kW, 50 Hz, 400 V

Condition: used, roll diameter 400 mm throat 385 mm workpiece height max. 335 mm cutting speed 25 - 150 m/min table surface area 595 x 595 mm saw band length 3400 x 6-16 x 0.9 mm work height max. 1020 mm voltage 400 V total power requirement 1.5 kW weight of the machine ca. 470 kg dimensions of the machine ca. 950 x 850 x 1920 mm good / well-maintained condition (!!) Equipment: - electro-motoric / robust, vertical band saw machine - continuously adjustable saw blade speed * Adjustment range via handwheel .. 25 - 150 m/min. - continuously adjustable height of the blade guide - continuously adjustable saw blade width - solid work table - machine base frame Kjdpfsxab A Rsx Ad Newt - control cabinet with main switch

Condition: good (used), Code: 0230 Brand: MAKITA Model: 5603R - CE Standard Circular saw with case for cutting wood, plastic, aluminum, and various materials - CE Standard Technical data: Kwjdoxn Stcepfx Ad Net Blade diameter mm 165 Motor 1100 W single-phase Rpm 5000 Max cutting depth at 90° mm 54 Max cutting depth at 45° mm 38 Weight kg 4,9 Transport not included

Condition: new, feed pressure 8 bar Effective free air delivery 250/350 L/min Receiver capacity 100l / 10bar l / bar weight of the machine ca. 67 kg. Kedpfxju Imd Dj Ad Nswt Number of cylinders 2 Stk. motor 230V / 2,2KW V / KW range L-W-H 940 x 430 x 950 mm

Condition: excellent (used), Year of construction: 2010, 4 kW motor 4 knives Ksdeul Utmjpfx Ad Nowt Table length 198 cm Table width 41 cm

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Condition: As new, machine is unused Features and technical specifications: - Saw band speed: 850 / 430 m/min - Flywheel diameter: 530 mm - Saw band length: 3,865 mm (min. 3,840 mm / max. 3,872 mm) - Saw band guides: precision guides above and below - Max. cutting height at 90°: 270 mm - Max. cutting width with fence: 474 mm - Max. cutting width without fence: 514 mm - Worktable length: 535 mm (max. 685 mm) - Worktable width: 535 mm - Worktable height: 945 mm - Worktable extension length: 535 mm - Worktable extension width: 150 mm - Worktable tilt: -10° to +45° Note: From 20° tilt, for safety reasons a clamping device or fence is required to prevent the workpiece from slipping. - Extraction port diameter: 2 × 120 mm - Output: 2.25 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Scope of delivery: - Mitre fence ±60° - Laser device for cutting line marking Kwjdpfx Asw E Tzljd Njt - Saw blade set: 1 × Saw band 3865 x 10 x 0.5 mm, 4 TPI 1 × Saw band 3865 x 20 x 0.5 mm, 4 TPI 1 × Saw band 3865 x 25 x 0.5 mm, 4 TPI Dimensions: 1,020 × 850 × 1,982 mm Weight: 163 kg Availability: short-term Location: Saxony-Anhalt

Condition: used, Year of construction: 1990, No. 04502 Veneer press Ott JU 2511/70 Used, year of construction 1990 Electro-hydraulic, approx. 15 kW Aluminum heating plates 2550 x 1100 mm LW Heating electric 4 hydraulic cylinders each 80 mm diameter Total pressing pressure 70 tons Specific pressing pressure 2.5 - 3.5 kg/cm2 Opening width 400 mm Button control for opening - closing - stop Pressure monitoring with automatic readjustment Adjustable limit switch for specific opening width HAWE pump Safety rip cord Incl. electric cable and plug 32 A Incl. electric plans, operating instructions as .pdf file Transport dimensions approx. 2900 x 1400 x 2000 mm LWH Weight approx. 3000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Ksdoxwp S Iopfx Ad Nswt Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: good (used), Code: 0245 Brand: FRAMAR Model: 500 Kwedpfexzd Hzjx Ad Nst Band saw for cutting wood, plastic and various materials Technical data: Flywheel diameter 480 mm Max cutting height 250 mm Three-phase motor Hp 2 v.380/50 Table dimensions 570 x 520 mm Foot brake Tilting table Suction port diameter 100 mm Overall dimensions mm 600 x 930 x 1870 h Weight 250 kg