Used Deep Spoon for sale (1,292)

Condition: used, Deep driller TBT T30-3-500 Dlsdpfx Abexbtzhj Tsa

Year of construction: 2021, condition: ready for operation (used), A semi-automatic vacuum skin packaging machine (tray sealer) Sealed Air for Darfresh skin packaging is available. Packaging capacity: 15/min, cycle performance: 1.5 cycles/min, film width: 562mm, max. product dimensions X/Y/Z: 670mm/470mm/50mm, tray length range: 135mm-700mm, tray width range: 120mm-520mm, tray height range: 5mm-50mm. Machine dimensions X/Y/Z: approx. 1050mm/1650mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Dljdpfjxaphbsx Ab Tsa

Condition: excellent (used), Heidenrich & Harbeck B3 SB Deep Hole Borer 10,000mm Capacity, Dledsw U Uhkopfx Ab Tsa 4 off Steady Rests 2 off Boring Bar Dampers Swarf Tray & Baskets Tooling, Counter Rotation

Condition: excellent (used), - Fryer model: IEF 224 - Serial number: J00015 - Dimensions (W x D): 600 x 610 mm - Tank dimensions: 2 x 200 x 400 mm - Capacity: 16 L (2 x 8 L) - Electronic temperature control - 2 baskets - Drain tap with valve - Power: 2 x 9 kW - Voltage: 400 V - Fryer model: AEF 224.150 - Dimensions: 600 x 700 mm - Tank dimensions: 400 x 400 mm - Capacity: 16 L Dsdpfxowyby Ee Ab Tjla - Electronic temperature control - Drain valve with tap - Power: 18 kW - Voltage: 400 V

Condition: used, URANIA DSK Maximum paper size: 80 × 112 cm Minimum paper size: 30 × 42 cm • Frame opening (normal): 78.5 × 108.5 Djdpfx Asw R Eqbob Tola

Condition: used, Year of construction: 2013, load capacity: 2,500 kg, Pantograph ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Dlodpfxeudgaze Ab Tea Technical condition: poor Description: Year 2013 ISO 3A (51 cm) to ISO 2A (41 cm) Capacity 2500kg Opening range 0-950 mm Width 1080 mm ID OS1357

Condition: used, Deep driller SIG BEM8/0.25 Dlodpfxjxbtzbo Ab Tsa

Year of construction: 2008, condition: ready for operation (used), A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible. Djdpfx Aswih Arob Tela

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, rotational speed (max.): 5,600 rpm, TECHNICAL DETAILS Drilling Data Drilling depth: 1,500 mm Axis Data X-axis travel: 3,000 mm Y-axis travel: 1,200 mm Z-axis travel: 1,300 mm X-axis feed rate: 15 m/min Y-axis feed rate: 15 m/min Z-axis feed rate: 15 m/min Feed force: 30,000 N Rapid traverse speed: 15 m/min Spindle Data Speed: min. 300 rpm Speed: max. 5,600 rpm Table Data Clamping surface: 2,000 mm x 1,250 mm Number of T-slots: 7 Table load capacity: 12,000 kg Dlodow Izr Ajpfx Ab Toa Tool holder: SK50 MACHINE DETAILS Control: TNC430 Dimensions & Weight Dimensions (L x W x H): 8,400 x 8,300 x 4,500 mm Total weight: 30,000 kg EQUIPMENT Stepless speed adjustment Drill bit grinding machine Note: Dismantling and loading can be offered for €8,000.

Condition: good (used), Year of construction: 2006, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, Max. drill Ø steel: 5 - 40mm X - Travel: 1650mm Dlodpfx Abjwyup Te Tja Y - Travel: 1000mm W - Travel: 500mm Table size L x W / or ø:1200 x 1500mm Spindle taper: SK40Mk Speeds / ranges: 4200Rpm Length: 6500mm Width: 3800mm Height: 3400mm Weight: 6500kg

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 308-600-1716, drilling depth: 600 mm, spindle speed (min.): 1,423 rpm, drill diameter: 65 mm, center height: 299 mm, TECHNICAL DETAILS Boring Unit Boring system: BTA + Ejector Speed steps: 8 or 16 with gear change Feed range: 0 – 500 mm/min Rapid traverse forwards/backwards: 5,000 mm/min Spindle taper: DIN 55022, size 6 Main Drive Three-phase motor: 37 kW, 1,500 rpm Frequency control: available Spindle Speeds Range I: 16/180 – 200/230 – 290/330 – 370/430 rpm Range II: 550/620 – 740/800 – 990/1,120 – 1,280/1,450 rpm Feed Drive Servo motor: 10 Nm, 3,000 rpm Ball screw: MH 50 × 10 × 14 Coolant System Total power requirement: 73 kW Coolant pump: MSDA 40-R38, SMDA 80-R46 Magnetic filter candles: MFK 400 R Dsdpowx E N Iefx Ab Tola Liquid cooler: DKL 7 Gap tube filter: 54 572 71 104 Immersion pump: TB 405/390 Centrifuge: Polar U6 MACHINE DETAILS Dimensions and Weight Machine weight: approx. 6,000 kg Paintwork Color: RAL 6011 EQUIPMENT Clamping fixture with movable drill bushing Clamping fixture with drill bushing carrier Clamping fixture with clamping table Clamping fixture with centering tailstock Clamping fixture with centering clamp ZS2 (HICO) Force measuring system KIMISIT 0 – 30 Hydraulic unit HS04-C807-6-0 Chip conveyor SEW RF 430T71D4 Centrifuge Hanning ZG 52x6K.137 Fans Dietz DR 80a 69 Lubrication pump Vogel DM7 Control unit for main and feed drives

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Dljdpew E H E Rjfx Ab Toa Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 6207 20.57, workpiece weight (max.): 3,000 kg, spindle speed (max.): 4,000 rpm, table length: 1,675 mm, table width: 700 mm, quill travel distance: 1,000 mm, TECHNICAL DETAILS Travel Paths and Drilling Motion Quill travel z: 1,000 mm Vertical drilling unit: 800 mm Traveling column in drilling direction w: 1,100 mm Table and Axes Table transverse travel x: 1,000 mm Table size: 1,675 x 700 mm Table load capacity: 3,000 kg Spindle and Machining Tool holder: SK40 Spindle speed: 100 to 4,000 rpm Drilling capacity in steel: 32 mm Thread cutting: M24 Dlodpfx Abew Elrvs Toa MACHINE DETAILS Power connection: 7.5 kW Dimensions & Weight Weight: 4.8 t Footprint: 3,500 x 6,000 x 2,400 mm Transport dimensions without enclosure: 2,400 x 6,000 x 2,400 mm

Condition: ready for operation (used), A 3-spindle deep hole drilling machine is available. 1) Deep hole drilling unit, travel X/Y/Z: 14000mm/300mm/2650mm, drilling spindles: 3, spindle distance: 325mm–375mm, motor power: 22kW, table dimensions X/Y: 6000mm/4000mm, number of tables: 2, max. workpiece weight: 50000kg/table, max. workpiece dimensions X/Y: 12000mm/4000mm, max. drilling diameter: 65mm. 2) Milling unit, travel X: 14000mm, max. milling diameter: 52mm, milling spindle power 1/2: 8.7kW/13kW. 3) Column drilling unit Soraluce TR1-1250, travel X: 14000mm, drilling diameter: 50mm. Includes heating plates, heated decoiling plates, steam plate, chip conveyor, partial NC control Mitsubishi, and various tools and clamping devices. Documentation available. An on-site inspection is possible. Dledpfx Abow Extye Tea

Condition: refurbished (used), Year of construction: 2019, TECHNICAL DETAILS Drilling depth: 1,000 mm Solid drilling range: 30 mm Boring range: 40 mm Spindle speed: 670 - 3,560 rpm Center height over bed: 380 mm Dljdjw Ekfuspfx Ab Toa Center height over floor: 1,400 mm Table length: 1,200 mm Table width: 1,200 mm Cross table travel: 2x400 mm Center height above table: 250 – 600 mm Z-Axis Feed rate: 0-7,000 mm/min W-Axis - 400 mm Feed rate: 0-7,000 mm/min X-Axis - 800 mm Feed rate: 0-2,000 mm/min Y-Axis - 350 mm Feed rate: 0-3,000 mm/min Rapid traverse speed: 3.5 m/min Motor rated speed: 8,000 rpm Motor rated power: 18.5 kW MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Connected load: 40 kW Total length: 6,500 mm Total width: 3,500 mm Total height: 2,900 mm Weight: 8 t EQUIPMENT Manufacturer: Siemens Sinumerik 840 Dsl Includes 1,700 l coolant system 20 single-lip drills from D=6 mm–20 mm/lengths from 1,200–1,750 mm Operating hours: 13,000 h

Condition: refurbished (used), Year of construction: 2017, operating hours: 428 h, functionality: fully functional, machine/vehicle number: 428, drilling depth: 400 mm, spindle speed (max.): 23,700 rpm, drill diameter: 6 mm, number of spindles: 1, workpiece length (max.): 450 mm, No reserve price - guaranteed sale to the highest bidder! Machine has only 428 operating hours! TECHNICAL DETAILS Control: SFT TBS 200 Drilling method: Single-lip drilling Number of spindles: 1 Drilling diameter in steel: 1 – 6 mm Drilling depth with plunge spindle: 120 mm Drilling depth with sealed housing only: 400 mm Sealed housing with one-piece steady rest: 350 mm Max. workpiece length: 450 mm Max. rapid traverse: 4,000 mm/min Spindle drive Power at 2,810 rpm: 2 kW Dledjwu Eb Ajpfx Ab Tja Power at 7,880 rpm: 3.5 kW Power at 23,700 rpm: 1.5 kW Frequency range: 100 – 800 Hz Tailstock Motor power: 0.75 kW Spindle speed: 500 rpm Max. clamping stroke: 60 mm Pre-slide drive Type: Ball screw spindle 25 × 5 mm with servo motor Drill bushing holder and chip ejector Drill bushing holder: permanently mounted on the machine bed Components: BOTEK drill bushing holder and sealing housing Chip ejection: downwards into the chip container MACHINE DETAILS Dimensions: 2.7 x 3.05 x 1.7 m Weight: 2.5 t Operating hours: 248 h Operating voltage: 400 V Frequency: 50 Hz Connected load: 14 kW Coolant system Tank volume: approx. 500 l Filtration: integrated paper belt filter Coolant pump: single-piece with frequency converter Flow rate: approx. 5 – 12 l/min Max. coolant pressure: 160 bar EQUIPMENT - Hydraulically adjustable tailstock - Manual tailstock adjustment for different tool positions Workpiece lengths - Drill bushing holders and sealing housings from BOTEK - Chip ejection directly into a collection container - Integrated coolant system with paper belt filter - Includes deep-hole drill bit and technical documentation Transportation possible by standard truck

Condition: good (used), The Electrolux deep fryer offers very high power, crisping even frozen products within minutes. Article number: 20778 Brand: Electrolux Model: 371081 Type: Deep Fryer Dimensions W x D x H: 400 x 700 x 900 mm Capacity: 15 liters Dljdow A Rw Sspfx Ab Tea Material: Stainless steel Connection rating: 400V Equipped with: lid and frying basket

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Dlsdpfjwh Rp Ejx Ab Tea Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 106 155 - 11, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Dsdpfow Agqhsx Ab Tjla Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Year of construction: 2007, condition: used, Backhoe bucket, excavator bucket, demolition bucket -Execution: stable -Content: 175 l Dljdpfxsb A I E To Ab Tea -Width: 500 mm -Height: 550 mm -Depth: 1000 mm -Quick change holder -Carrier device: Hekomat SKL08 -Ripper teeth -The mounting on the spoon can be changed by us at an additional cost -Own weight: 210 kg

Condition: repair required (used), Year of construction: 1996, For sale is an IXION TL 601 deep hole drilling machine. Unfortunately, the machine is experiencing electrical problems. Constants need to be reset by a technician, and the backup battery needs to be replaced. New LCD display was recently installed. New LED display. Machine No. 950192 Year of manufacture 1996 Manufacturer: Maschinenfabrik IXION Otto Hafner -Travel paths + Quill Tl 601 (Z) 600 mm + Vertical drilling unit (Y) 300 mm + Transverse table (Table surface 1200 mm x 600 mm) (X) 700 mm + In drilling direction (W) 1000 mm -Clamping table + Table surface (standard) 1200 mm x 600 mm + Table load (T1200) 1000 kg -Tool holder + SK 40 holder according to DIN + Pull stud 69871 According to DIN 69872 -AC main spindle drive 3.0 kW + At 100% duty cycle, S1 5.5 kW At 50% duty cycle, S6 7.5 kW +Spindle turning speed Directly programmable 100-4000 rpm Performance: +Drilling capacity in steel 2312 D 32 mm +Tapping M24 Dedpfxsh Dpv Rj Ab Tela -Weight / Dimensions Weight 2500 kg Length approx. 4230 mm Width approx. 1885 mm Height approx. 1870 mm All prices plus VAT We can deliver and commission the machine. All prices plus VAT Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours?

Condition: used, Cylindrical roller bearings, spherical roller bearings, deep groove ball bearings Djdpfed S Ibbjx Ab Tola -FAG: 6218MA.C3 -Outer diameter: 160 mm -Inside diameter: 90 mm -Width: 30 mm -Price: per piece -Number: 2 pieces -Weight: 2.7 kg

Condition: used, Axial deep groove ball bearings, axial deep groove ball bearings, axial ball bearings, thrust bearings -Manufacturer: ISB, axial ball bearing 51144M -Main dimensions according to: ISO 9001: 2000 -Outer diameter: 270 mm -Width: 37 mm -Inside diameter: 220 mm Dledpfx Aof Ngcgsb Tja -Number: 4x ball bearings available -Price: per piece -Weight: 4.5 kg

Condition: used, Axial deep groove ball bearings, axial deep groove ball bearings, thrust ball bearings, thrust bearings -Manufacturer: FAG, axial deep groove ball bearing 51164PM, OVP -Outer diameter: 400 mm -Dimension: Ø 400 x 65 mm -Weight: 18.4 kg Dlodjf S Nclspfx Ab Tja

Condition: used, Ball bearings, deep groove ball bearings -Number: 80x stock available -Price: per piece -Interior diameter: Ø 10 mm -Outer diameter: Ø 28 mm -Width: 8 mm Dsdpfxsb A S Dko Ab Tola -Weight: 0.2 kg/piece