Used Deep Hole Drill for sale (9,984)

Condition: excellent (used), very good condition. video available. Pedpfoxyxh Djx Adnerd

Condition: good (used), The scope of delivery includes: 1x Depth bar, used Material color: raw Total length: approx. 1,110 mm Inner length: approx. 1,102 mm for stand depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: K 140 x 60 x 4 mm Crossbeam support: approx. 52 mm Unit weight: approx. 7.10 kg Your contact persons in our company: Mr. Andre Evening Mr. Mario Klöver Pjdpfowl Ncfsx Adnerd Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: used, Year of construction: 2010, operating hours: 547 h, Auction item. Directional drilling rig in working condition. Not used for a couple of years so may need some maintenance. Sold without trailer. Pushing 40 tons. Maximum drilling distance 60 meters. Prjdpfjxyvv Sex Adnod Engine overhauled. Has 30 meters of rods. No documentation.

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Podpfxjxw Rpue Adnjrd 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2000, operating hours: 59,458 h, functionality: fully functional, machine/vehicle number: 1926, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, table width: 1,800 mm, table length: 2,200 mm, table load: 15,000 kg, overall weight: 48,000 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 2,500 rpm, power: 48 kW (65.26 HP), quill diameter: 130 mm, quill travel distance: 630 mm, Equipment: cabin, rotational speed infinitely variable, Technical Specifications X-axis travel: 3,500 mm Y-axis travel: 2,500 mm Predpfjxyu Dzex Adned Z-axis travel: 1,250 mm Table size: 1,800 × 2,200 mm Table load capacity: 15,000 kg Spindle speed (max): 2,500 rpm Spindle diameter: 130 mm Control: HEIDENHAIN TNC 426 Number of axes: 5 Automatic tool changer: 60 positions Tool holder: ISO 50 Operating Hours Machine on-time: 59,458 h Spindle running hours: 23,258 h Equipment & Features Operator's cabin Complete machine documentation included

Condition: new, grinding range 3 -28 mm angle adjustable from - to horizontal 0-180 Grad angle adjustable from - to vertikal 0-45 Grad angle adjustable from - to negativ 0-52 Grad clamping range 3 - 28mm mm 0 5200 U/min connected load 230 / 250 Volt / Watt wheel diameter 100 x 50 x 20 mm weight of the machine ca. 45 Kg dimensions 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. Predpfsvn U Adox Adnsd comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16" - 5/16" - 3/8" - 1/2"

Condition: excellent (used), Holzma B14/4 drilling machine in excellent condition. Ready for operation. Video of the machine in operation available. Podpfx Adoxyxgtsnsrd

Condition: used, Your contact person in our home: Mr: André evening Mr: Marcel Brahms Podedqkf Iepfx Adnjrd Mr: Simon blank We offer you 100 used depth requirements of the manufacturer Nedcon to purchase. This depth Edition is suitable also for other manufacturers. Technical data to the depth requirement: Shelf system: Nedcon Type: NS In the scope of delivery included: 100xTiefenauflagen, used Material color: compl. zinc-plated f. stand depth: 800 mm Overall length: 800 mm clear span width: 710 mm C-Profilabm.: approx. 60 x 50 mm Traverse Edition: approx 40 mm Material thickness: 2.0 mm Weight / unit: 1,983 kg Our services at a glance: (Prices on request) -Installation, construction our general conditions of erection are to be observed -Shelf testing Shelf inspection according to DIN EN 15635 carried out to comply with the BGR 234 Visual inspection for all shelf systems -Delivery with our own fleet of vehicles (without discharge)

Condition: used, Used machine Psdpsxwz N Eofx Adnjrd Availability: approx. mid/end of January 2026 Location: Hesse

Condition: good (used), Reamer, twist drill, drill -Twist drills: different sizes on request -different manufacturers -Price: Ø 10 - 30 mm 0.50 EUR/mm (drill Ø 20 mm = 10 EUR net) -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) Prjdpfx Aev H D N Rodned -Two-cutter -Diameter: 10-80mm -different lengths -Recordings: MK1 - MK6 -Type: HSS

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: 4082149208, The double electric fryer with a capacity of 14+14 liters and an underframe, model Z7FREH2E00, is an outstanding choice for professional kitchens or markets. This unit delivers high performance and enables the simultaneous frying of large quantities of food. The double fryer is specifically designed for intensive use in hospitality operations or high-traffic TO GO sales points. An invoice with VAT will be provided. Technical Data: • Dimensions in mm: external (W x D x H): 800 x 720 x 942 • Tank (W x D x H): 240 x 380 x 285 • Cupboard (W x D x H): 680 x 640 x 420 • Model designation: Z7FREH2E00 • Serial number: 4082149208 • Capacity: Tanks: 2 x 12-14 liters • Power supply: Electric: 17.4 kW / 3N / 400 V • Temperature range: Working temperature: 105 to 185 °C • Weight: Gross: 83 kg, Net: 81 kg • Year of manufacture: 2024 Condition: Used, fully functional (operated for 2 weeks) Equipment: • Stand-alone electric fryer with two directly heated standard tanks, each 14 liters • 1.5 mm thick front and cover plates made of stainless steel, side and rear cladding in stainless steel with Scotch-Brite finish, all-round rounded edges • Standard tanks with directly heated, internal heating elements • Working temperature from 105 - 185 °C, thermostatically controlled • Fill levels min / max: 12 / 14 liters per tank • Height-adjustable feet (+50 mm) Our used equipment service for you: • 6 months warranty • High-quality branded equipment at fair prices • Professional refurbishment / inspection & expert cleaning • Tested & fully functional – or your money back • Flexible shipping or self-collection options • Expert advice – before and after purchase • Provision of operating manuals, wiring diagrams & spare parts • Inspection according to DGUV V3 Shipping: Prodpfsxwyc Rsx Adnod • Delivery or self-collection upon arrangement • Worldwide shipping on request • Shipping to islands or mountain stations by arrangement only

Condition: good (used), Nagel Citoborma 280B Paper Drill The device is 100% functional. This is one of the newest models. The drill table is adjustable in every plane (sides, front/back). It has limiters for setting the drilling spacing. The installed table is in an enlarged version. Additionally, the paper drill has an automatic table lock, which is released after each cycle. Super condition. Solid construction – weight 76kg. 380V power supply Prsdpfxsxwtu He Adnjd Two drilling heads, with adjustable spacing within the range of 45-120 mm. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been inspected The set includes drills and tools, a new cutting stick, and an instruction manual.

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 8,000 kg, empty load weight: 1,180 kg, construction width: 1,200 mm, Pantograph Load center: 600 Condition: Ready for use and fully functional Technical condition: very good Pedpfou Dy Hqjx Adnsrd Description: Feed fork carriage: 540 mm

Condition: good (used), Scope of delivery includes: 01x deep beam, used Material color: RAL 5001 blue Total length: approx. 1,112 mm Inner length: approx. 1,103 mm for frame depth: approx. 1,100 mm clear support span: approx. 999 mm Profile dimensions: K 50 x 50 x 4 mm Beam support width: approx. 53 mm Unit weight: approx. 2.52 kg Your contacts at our company: Prodpfx Aewwviiodnsd Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transport or shipping beyond this is associated with additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Year of construction: 2015, operating hours: 3,093 h, Make of engine: Deutz 6 cylinder CE mark: yes Podpfx Adexykvasnord Technical condition: very good Visual appearance: very good Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Delivery terms: EXW Production country: SE Please contact Christiaan Dekker for more information Atlas Copco Boomer WE3 C30 Year: 2015 Hours: 3093 1000 volt CE certified Gross weight: 54.7 ton Diesel power180KW 6 cylinder engine Electric power 28KW/ 320Ampere Hydraulic tilt cabin Prepared for Leica GPS Rotary air drills COP 3038 drills Hydraulic waterbooster Hydraulic Compressor Hydraulic manbasket Tyres 90% good Price Euro. 129.000,-

Condition: good (used), Hello, For sale: RF-50/1250 radial drilling machine. The machine is in working condition, currently in continuous operation, and can be inspected and tested on site. Psdpsxykctsfx Adnjrd The price listed in the advertisement is net and VAT must be added. The machine can be viewed in Starachowice at 13 Kwiatkowskiego Street. Telephone contact available from 7:00 to 16:00.

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: 4082148808, The double fryer in electric version with a capacity of 14+14 litres and a base cabinet, model Z7FREH2E00, represents an outstanding choice for professional kitchens or markets. The unit boasts high performance and allows for the simultaneous frying of large quantities of food. This double fryer is specifically designed for intensive use in catering businesses or busy takeaway outlets. You will receive an invoice with VAT shown separately. Technical data: Dimensions in mm: external (W x D x H): 800 x 720 x 942 Basins (W x D x H): 240 x 380 x 285 Cabinet (W x D x H): 680 x 640 x 420 Model designation: Z7FREH2E00 Serial number: 4082148808 Performance data: Basins: 2 x 12-14 litres Electrical connection: 17.4 kW / 3N / 400 V Temperature range: Operating temperature: 105 to 185 °C Weight: Gross weight: 83 kg, Net weight: 81 kg Year of manufacture: 2024 Condition: Used, fully functional (operated for 2 weeks) Features: Electric floor-standing fryer with two directly heated standard basins, each 14 litres 1.5 mm thick CNS front and top panel, side and rear cladding made of stainless steel, Scotch-Brite finish, all-round rounded edges Standard basins with directly heated, internal heating elements Operating temperature adjustable from 105 to 185 °C, thermostat controlled Fill levels: min / max: 12 / 14 l per basin Height-adjustable feet (+50 mm) Predpfxexwycqe Adnjd Our pre-owned equipment service for you: 6 months warranty High-quality brand equipment at fair prices Professional refurbishment / inspection & expert cleaning Tested & fully functional - or your money back Shipping or collection flexible as required Competent advice - before and after your purchase Provision of operating instructions, wiring diagrams & spare parts Tested according to DGUV V3 Shipping: Delivery or collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement

Condition: good (used), Year of construction: 2000, Control: TNC 426M Year of manufacture: 2000 Technical data to follow. Laubender GmbH Industriestraße 13 Predpfx Adexyh Nwsnod 97461 Hofheim

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 1522, type of input current: three-phase, input voltage: 400 V, grinding wheel diameter: 225 mm, rotational speed (min.): 1,500 rpm, overall weight: 850 kg, space requirement height: 1,400 mm, space requirement length: 1,230 mm, space requirement width: 850 mm, grinding wheel width: 50 mm, clamping range: 85 mm, year of last overhaul: 2024, • Grinding range 13 - 85 mm / Point angle 80° - 160° • Overhauled 6-jaw special chuck in 03-2024 (€ 6,250) • Including operating tools • Water tank on wheels (60 liters) • Extension sleeves • Halogen lamp 230V Includes operating manual, exploration drawing, wiring diagram, assembly and spare parts list. Prodpjxyhl Sofx Adnjd Supply of spare parts and maintenance continues to be guaranteed by a specialist company!

Condition: good (used), The scope of delivery includes: 1x Depth bar, used Material color: raw Total length: approx. 1,110 mm Inner length: approx. 1,102 mm for stud depth: approx. 1,100 mm Prodpfxswl Ulle Adnod Clear span: approx. 1,000 mm Profile dimensions: K 100 x 50 x 4 mm Crossbeam support: approx. 52 mm Unit weight: approx. 5.42 kg Your contact persons in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Year of construction: 2000, functionality: fully functional, throat depth: 1,680 mm, total height: 31,600 mm, drilling capacity: 75 mm, total width: 11,000 mm, total length: 28,300 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 10 rpm, quill stroke: 400 mm, spindle mount: MK 6, overall weight: 5,700 kg, height adjustment type: electric, power: 10 kW (13.60 HP), Radial drilling machine WRA 632 economic. Year of manufacture: 2000. Manufacturer: H. CEGIELSKI PL. Morse taper 6. Arm length 1600 mm, Max drilling diameter in steel – 65 mm, in cast iron 75 mm, Max tapping diameter in steel – M56, in cast iron M68, Spindle diameter 100 mm, Spindle travel 400 mm, Prodstp Swwopfx Adnjd Number of spindle speeds: 12, from 10–1600 rpm, Number of feeds: 8, from 1.14–2.04 mm/rev, Spindle reach from column: min 335 mm, max 1600 mm, Distance from spindle to base: min 390 mm, max 1680 mm, Base working surface 1760 x 1020 mm, Worktable (cube) dimensions 750 x 500 x 1200 mm, Overall dimensions (height x length x width) 3160 x 2830 x 1100 mm, Weight 5700 kg, Total power requirement 10 kW.

Condition: ready for operation (used), model : LA 10 In very good condition. Predpfou Dmyqox Adnod

Condition: good (used), Drilling capacity 13 mm Spindle mount B 16 6 spindle speeds 410 - 3400 rpm Drilling depth 60 mm - Drill head height adjustable - Motor pole reversible Podpjwnfarsfx Adnord Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Condition: good (used), Scope of delivery includes: 01x deep beam, used Material colour: black Total length: approx. 1,111 mm Internal length: approx. 1,103 mm for upright depth: approx. 1,100 mm Prodpfxewwuchs Adnjd Clear support width: approx. 1,000 mm Profile dimensions: K 140 x 50 x 4 mm Cross member bearing: approx. 52 mm Unit weight: approx. 7.26 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply; these can be requested from us separately depending on delivery location or scope of supply.

Condition: good (used), The scope of delivery includes: 01x depth bar frame, used Material color: sendzimir galvanized Total length: approx. 1,250 mm for shelf depth: 1,200 mm Clear span: approx. 1,100 mm Cross beam support: approx. 50 mm Support bracket: L: approx. 80 x 80 mm Total width: approx. 860 mm Inner width: approx. 855 mm Material thickness: approx. 3 mm Side frame: Length: approx. 1,2450 - 1,070 mm Sloping at the front Width: approx. 200 mm Height: approx. 195 mm End stop: Width: approx. 200 mm Height approx. 195 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This is a used item, there may be scratches, dents and signs of use. This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which will be charged separately depending on the place of delivery or scope of delivery. Prodpjr Dr Suofx Adnod