Used Deckel Fp33 for sale (672)

Condition: ready for operation (used), Year of construction: 1999, Control Unit Brand HEIDENHAIN Model 426m Main Drive Number of axis 3 Bsdpfx Abjxzvr Ne Tedk Movement X-Axis Movement 800 mm Y-Axis Movement 650 mm Z-Axis Movement 550 mm Additional Equipment Vise Angle table Various mounts Royal presetting device This 3-axis DECKEL MAHO DMU 80E was manufactured in 1999 and features a Heidenhain 426m control, travel distances of X 800mm, Y 650mm, and Z 550mm. It includes a 24-fold changer and an internal hard drive. Installation dimensions are approximately 2x3m. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMU 80E machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: good (used), TOOL MILLING MACHINE DECKEL FP 1 - Travel X/Y/Z: 245-150-340 mm - Without vertical head / Machine was used exclusively for horizontal milling operations Bsdjx A D Nfepfx Ab Tedk - Speed range: 95 - 1900 rpm - Dividing head - Automatic feeds on X & Y axes - Various collets and tool holders - Documentation included Dimensions: LxWxH 1.1x0.9x1.6 meters / Weight: 600 kg Errors and omissions excepted

Condition: used, Year of construction: 1982, x-travel 300 mm y-travel 160 mm z-travel 340 mm feeds -stepless- 5-500 mm/min rapid traverse 1200 mm/min spindle turning speed range 40 - 2000 U/min tool taper Normkegel 40 table length 600 mm table width 120 mm voltage 380 V Bedpfx Aovvnfueb Tedk frequency 50 Hz rated current 13 A weight of the machine ca. 0,750 t dimensions of the machine ca. 1,8 x 1,5 x 1,8 m DESCRIPTION Machine incl: active three-axis digital readout HEIDENHAIN documentation various tool holders Machine vice etc.

Condition: used, functionality: fully functional, with HEIDENHAIN 3-axis digital readout and workplace lamp, including workshop drawer cabinet with 7 drawers, contents: measuring tools, machine accessories, shank cutters, drills, countersinks, milling cutters Bdjdpfjx A An Tsx Ab Tjk

Condition: used, functionality: fully functional, Friedrich Deckel Grinder Model S1 Bsdpfxexzpq Se Ab Todk In good condition

Condition: excellent (used), Year of construction: 1975, O F F E R We are pleased to offer you, subject to prior sale and errors excepted, the following available ex-stock: DECKEL Universal Tool Milling Machine Model: FP 2 Year of manufacture: approx. 1975 _____ Table travel: - Longitudinal (motor/manual): 390 / 400 mm - Vertical (motor/manual): 390 / 400 mm Cross slide travel (motor/manual): 190 / 200 mm Bjdpfx Aoxzk Irob Tsdk Fixed angle table: 250 x 700 mm Distance from spindle to table: 400 mm Spindle overhang: approx. 165–465 mm Spindle taper: SK 40 18 spindle speeds: 40–2,000 rpm Infinitely variable feed range: 5–400 mm/min Rapid traverse: 1,200 mm/min Spindle drive: 2.2 kW Total drive: 2.5 kW - 380 V - 50 Hz Weight: 1,000 kg Accessories / Special equipment: • DECKEL universal swivel angle table approx. 250 x 700 mm, mounted • Original DECKEL universal dividing head with tailstock and faceplates • Original DECKEL high-speed vertical milling head with independent drive • Large original DECKEL tool cabinet for storage of the above accessories and various arbors, approx. 30 collets, various milling tools, additional arbors, etc., as well as operation tools, separate electrical cabinet, coolant system Condition: Very good – demonstration ready, ideal for training workshops/apprenticeship use Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice We always have further DECKEL FP 1 / FP 2 / FP 4 milling machines in stock, as well as accessories such as spiral milling attachments, etc.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: Heidenhain Mill Plus, table width: 500 mm, table length: 500 mm, rotary table diameter: 500 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,618 h, coolant supply: 40 bar, spindle nose: SK40 (DIN69871), number of slots in tool magazine: 60, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The 5-axis DMU50 eVolution has been removed from production in working order and can also be seen in operation in our showroom (by appointment). Bdodpfxoxnixij Ab Tek The machine is equipped with 40 bar internal spindle cooling, chip conveyor, 60-tool changer, Renishaw tool setter, Heidenhain 3D probe, 18,000 RPM spindle, Visiport, and original factory extraction system.

Condition: good (used), Tool Milling Machine / DECKEL FP 2E – from training facility Bdjdpfx Ajxga Tuob Tjk - Travel paths X/Y/Z 400x200x400mm - Automatic feeds + rapid traverse on X/Z axis - Speed range 40-2000 rpm - Tool holder ISO 40 - Vertical/horizontal milling attachment - Swiveling vertical head with quill - Machine with sliding head / extended Y-axis travel - New control cabinet - Coolant system - Chip tray - Documentation Dimensions: LxWxH 1.5x1.6x1.8 meters / Weight 1500 kg Errors and omissions excepted.

Year of construction: 2002, condition: ready for operation (used), Axes: 5, travel X/Y/Z: 500mm/400mm/400mm, speed: 9000rpm, spindle power: 9kW/13kW, tool stations: 16, max. tool length: 290mm, max. tool weight: 6kg, max. table load: 200kg, feed rate: 10m/min, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 4500mm/4000mm/2500mm, weight: approx. 3400kg, control: Heidenhain MillPlus, operating hours: 34724h, spindle hours: 6490h. One operating button of the machine is defective, and the tool is sporadically not ejected. Documentation available. An on-site inspection is possible. This machine was used for training purposes. Bodpox Aupijfx Ab Tjdk

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand SIEMENS Model 840D Powerline Main Drive Number of axis 4 Tools Type of tool holder HSK63 Bedpfxexy Ti Ae Ab Tedk Additional Equipment Pallet changer: RS4 Tool magazine: Omron This 4-axis DECKEL MAHO DMC 70H duoBlock was manufactured in 2008. A robust horizontal machining centre, it offers advanced capabilities for complex machining tasks. Consider the opportunity to buy this DECKEL MAHO DMC 70H duoBlock horizontal machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2006, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 U/min power capacity - main spindel 9 / 13 kW Torque 57 / 82 Nm tool taper SK 40 table surface area 630 x 500 mm Tilting area -5 / +110 ° max. table load 200 kg T-slots 14 H7 T-slot - distance 63 mm C-Axis +/- 360 ° rapid travel ( X / Y / Z ) 12 m/min feed speeds 10.000 mm/min Tooling 16 pos. max. tool weight 6 kg max. tool length 300 mm max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm tool taper SK 40 Bdodjvanqxopfx Ab Tek total power requirement 17 kVA weight of the machine ca. 3,6 t dimensions of the machine ca. 3,0 x 3,0 x 2,5 m Tool Room Milling Machine - Universal DECKEL MAHO - DMU 50 - 5 Axis (3+2) - only 10.071 Spindle Hours - WITHOUT tools

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rotational speed (max.): 12,000 rpm, CNC control Heidenhain TNC 430 32-fold tool changer coolant device 2x chip conveyor measuring feeler The hole X-axis travel is 2050mm. You can work in one move 2 meters. A dividing wall is also with the machine. Then the X-travel will be split. Technische Daten / technical details: X-Weg / X-travel 2050 mm Y-Weg / Y-travel 520 mm Z-Weg / Z-travel 520 mm Spindelaufnahme / spindle taper SK40 Bodpfxou Hf Rye Ab Tsdk Drehzahlbereich / spindle speed 12000 UpM /rpm Werkzeugwechselmagazinplätze / number of tool places in changer 2x 32 Antriebleistung Spindel / drive capacity spindle 36 kW Gewicht ca. / weight 12800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 6 m/min, controller manufacturer: Heidenhain, controller model: TNC 426/430M, overall weight: 3,000 kg, spindle speed (max.): 9,000 rpm, operating hours of spindle: 10,292 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 16, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This Deckel Maho DMU 50T comes from a training department and has therefore never been used as a production machine. The machine is accordingly in a very tidy condition, and both the axes and spindle still run very smoothly! Bjdpfsxzf Erjx Ab Todk Equipped with Heidenhain electronic handwheel. Dimensions: 2200x2200x2300 mm (LxWxH) Weight: approx. 3000 kg

Condition: used, Year of construction: 1979, x-travel 300 mm y-travel 160 mm z-travel 340 mm Bdedoviyf Hjpfx Ab Tsk spindle taper ISO 40 spindle turning speed range 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1200 mm/min creep feed 4 mm/min control Heidenhain TNC 113 total power requirement 1,6/2 kW weight of the machine ca. 570 kg dimensions of the machine ca. 1,2 x 1 x 1,75 m with active digital display "Heidenhain TNC 113", for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. We ask private interested parties to refrain from making an inquiry, as this is a well-maintained professional machine and usually exceeds the budget of hobby mechanics, including VAT. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2005, Type: DMU 80T2 Year of manufacture: 10/2005 Control: Heidenhain 3D path control iTNC-530 Clamping surface: 1250 x 700 mm (fixed table) Working area: X: 980 mm Y: 630 mm Z: 630 mm Spindle speed range: 20 – 12,000 rpm Feed rate: 0–10 m/min Tool changer: 32 magazine positions SK 40 Machine hours: Control on: 33,814 h Bdedpoxz Rhlefx Ab Tjk Machine on: 29,764 h Program run: 8,237 h

Condition: ready for operation (used), Year of construction: 2008, Main Drive Number of axis 5 This 5-axis DMG DECKEL MAHO DMU 70 eVo was manufactured in 2008. Consider the opportunity to buy this DMG DECKEL MAHO DMU 70 eVo universal machining centre. Contact us for more information. Application Types Bedjxy Ap Sepfx Ab Tsdk Milling

Condition: used, Year of construction: 2010, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Heidenhain iTNC 530 tool taper SK 50 number of tool places 120 Pos. Bodpfx Aexylqxeb Tsdk On-time hours ca. 66737 h spindle hours ca. 36316 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Fully protective cabin with sliding doors and interior lighting - Setup room - Tool measurement in the work area with BLUM laser - 3D measuring probe - Operating modes 3 bar internal coolant supply with 600 l tank and paper belt filter - Chip flushing gun with 1 bar/ l pump - Chip conveyor - Brankamp monitoring system - 3-color signal light - Coolant ring nozzle - Blow-air cooling system - Coolant system - Oil/emulsion mist separation system - Control cabinet cooling unit - Operating manuals Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), functionality: fully functional, Scope as per attached images Bdodjxz Hfgepfx Ab Tsk

Condition: reconditioned (used), Year of construction: 1986, Tool and Cutter Grinder Make: Deckel Model: S0 Bodpfxsxyiqvo Ab Tjdk Year of manufacture: 1986 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey Machine No.: 14277 Accessories: - Grinding wheel with flange - Operating instructions including new electrical system On/Off switch in new housing with undervoltage coil for restart protection for example, in case of power failure or unplugging Used as seen with warranty The machine is technically in accordance with the state of the art of its year of manufacture.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table load: 200 kg, spindle speed (max.): 9,000 rpm, CNC Heidenhain TNC 426 WORKING AREA: Longitudinal X: 500 mm Cross Y: 400 mm Vertical Z: 400 mm Rotation: 360° Tilting: -10° / +95° SPINDLE: Spindle speed: 9,000 rpm Bsdpfjxz Axiox Ab Todk Power (100% / 40%): 9 / 13 kW Tool taper: SK 40 DIN 69871 AXIS DRIVE: Feed rate X, Y, Z: 10,000 mm/min Rapid traverse X/Y/Z: 12 m/min TABLE: Manual rotary table with tilting axis Clamping surface: 700 x 500 mm Maximum load: 200 kg T-slot distance/size: 63 mm / 14 H7 TOOL CHANGER: Magazine capacity: 16 tools Maximum tool length: 290 mm Maximum tool weight: 6 kg DIMENSIONS AND WEIGHT: Dimensions: 1,783 x 1,647 x 2,534 mm (h) Weight: 3,000 kg Year: 2002

Condition: good (used), DECKEL Tool Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Expansion of working area to: 300 x 260 mm Bodjxyc Tkspfx Ab Tsdk Spindle speeds, vertical/horizontal: 40 – 2,000 rpm Gear stages: 16 Spindle taper: SK 40 Tool holder: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z axis: 5 – 500 mm/min Feed adjustment: stepless Rapid traverse X/Z axis: 1,200 mm/min Feed Y axis: manual Fixed angle table: 600 x 210 mm Tilting vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1,250 x 1,200 x 1,850 mm Technical data subject to change! Features: - For horizontal machining, the milling head is swiveled 90 degrees and pushed to the rear. - 3-axis precision digital readout HEIDENHAIN - Stepless feed on X/Z axis - The machine was partially overhauled by a specialist company a few years ago. Equipment: - 3-axis digital readout HEIDENHAIN - Micro coolant spray system - Fixed angle table - Chip tray - Machine lamp - Machine feet Further accessories available on request! Condition: Good to very good, from a training workshop Available from March 2026

Condition: refurbished (used), Year of construction: 1988, - Refurbished in 2022 - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gearshift - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct position measurement - Collision protection coupling in the Y and Z axes - Built in 1988 - Including tool holders, drilling/milling tools, and tool carriage Bdodowhk Ubjpfx Ab Tek Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually movable on spindle block: 150 mm Main drive: - Pole-changing Three-phase brake motor: Manual gearbox with forward/reverse rotation - Power: 3.7 / 4.4 kW - Work spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring package - Tool release: Hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z-axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (including safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Condition: ready for operation (used), Year of construction: 2002, operating hours: 55,730 h, General Data Machine weight 24500 kg Control Unit Brand SIEMENS Model Sinumerik Main Drive Spindle speed range 12000 Spindle motor power 35 kW Number of axis 3 Movement X-Axis Rapid Traverse 100 m/min Y-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 60 m/min Table Table load 3100 kg Turret Number of tool slots 9 Tools Max weight 6 kg (SK40/HSK63) or 12 kg (SK50/HSK100) Type of tool holder HSK-63 Additional Equipment Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open General Data Machine weight 24500 kg Control Unit Brand SIEMENS Model Sinumerik Main Drive Spindle speed range 12000 Spindle motor power 35 kW Number of axis 3 Movement X-Axis Rapid Traverse 100 m/min Y-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 60 m/min Table Table load 3100 kg Turret Number of tool slots 9 Bdsdpfjwxz Igsx Ab Tsk Tools Max weight 6 kg (SK40/HSK63) or 12 kg (SK50/HSK100) Type of tool holder HSK-63 Additional Equipment Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2002. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), DECKEL Universal Milling Machine FP 1 No. 2101 with HEIDENHAIN 2-axis Digital Readout Travel Paths: X/Y/Z: 300 x 160 x 340 mm Manual Adjustment Milling Head Arm: 100 mm Extension of Working Area to: 300 x 260 mm Spindle Speed Vertical/Horizontal: 40 – 2,000 rpm Gear Steps: 16 Spindle Taper: SK 40 Tool Fixture: S20 x 2 (Deckel Standard) Quill Travel: 60 mm Feed X/Z Axis: 5 – 500 mm/min Feed Control: stepless Rapid Traverse X/Z Axis: 1200 mm/min Feed Y Axis: manual Fixed Angle Table: 600 x 210 mm Tilting Vertical Head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data not binding! Features: For horizontal machining, the milling head is swivelled 90 degrees and slid to the rear. 2-axis precision digital readout HEIDENHAIN POSITIP VRZ 719 Infinitely variable feed on X/Z axis The machine underwent partial overhaul by a specialized company a few years ago. Equipment: 2-axis HEIDENHAIN digital readout Fixed angle table Chip tray Machine lamp Machine feet Further accessories on request! Condition: good to very good from training workshop Bedpfexyc N Esx Ab Tjdk Available from March 2026

Condition: used, Year of construction: 1987, - Lid Contour 3 CNC control - Sliding vertical milling head with extendable spindle - counter bearing for long milling arbors - Hydraulic tool clamp - Automatic speed gearbox - Automatic clamping in X/Y/Z axes - Automatic central lubrication - coolant device - direct path measurement - Collision protection clutch in Z/Y axes Bodpfxou Awlze Ab Todk - year of construction 1987 Technical data Working range: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Vertical quill stroke: 80 mm - Vertical milling head can be moved on headstock: 150 mm Main drive: - Motor: pole-changing three-phase AC brake motor and manual gearbox with clockwise/anticlockwise rotation - Power: 3.7 / 4.4 kW - 18 working spindle speeds: 50 - 2500 rpm - Step change: 1.25 - Tool holder: SK40 (M16) - Tool clamp: hydraulic Feed drive: - X-axis: 1 DC motor - Y- and Z-axis: 1 DC motor - All axes: ball screws - Feed speed programmable: 10 - 1000 mm/min - Rapid traverse X-/Y-/Z-axis: 2000 mm/min Universal table: - Number of T-slots: 7 - T-slot width: 14/H7 mm - T-slot spacing: 63 mm - Center bore Ø/depth: 63H6 / 8 - Distance from table center to screw-on surface: 260 mm - Max. Passage height (vertical milling spindle/table surface): 490 mm - Permissible load: 300 kg - Weight: 230 kg - Rotation range in horizontal position (axis C): 360 ° - Tilt range (axis A): +450 / -150 ° - Pivoting range (axis B): ± 450 ° - Measuring range with direct digital display: Resolution 360000 x 0.001 ° - Reduction ratios: 60:1 / 120:1 / 240:1 Installation: - Space requirement with safety area: approx. 2.3 x 2.5 m - Operating voltage: 400 V / 50 Hz - Total connected load: 7.5 kW / 9.5 kVA - Machine weight: approx. 1830 kg - Floor load: 3000 kg/m²