Deckel fp 42 nc for sale

Your location was not identified (Edit)
Enter your address
or
Move
6
NC rotary table with motor cover Built-in rotary table, extension table for universal tool Fäsmaschine fits DECKELTyp FP 42 NC Built approx. 1985 Table size 800 x 600 mm Keyway width 16 mm Groove spacing 90 mm motorized swivel 360° -Table Rotary actuator with DC servo motor -Hydraulic clamping -Inclined bed stretching 45° -Manual fine adjustment by hand 0,01Teilstriche = 36 seconds -Degree of scaling at the round table -Limit switch cams for positioning or reference position recognit... more
5
x-travel:1170 mm y-travel:500 mm z-travel:370 mm control:Dialog 1 turning speed range:31 - 3150 U/min tool taper:SK 40 table surface area:1300 x 850 mm T-slot - width: mm rapid motion -longitudinal/cross/vertical:4000 mm/min total power requirement:4 kW weight of the machine ca.:4,0 t dimensions of the machine ca.:2,2 x 2,1 x 2,3 m Ltryhcsx more
8

DECKEL FP 42 NC DECKEL FP 42 NC

More Deckel Fp 42
Fellbach, GermanyGermany
18005 km
1985
repair required (used)
Sell manicured milling machine FP42NC. Unfortunately, the spindle bearing of the Z-axis spindle is defective and needs to be replaced. -Built: 1985 -Work table -x: 1,170 mm -y: 500 mm -z: 370 mm -Speed max work spindle: 6,300 -Tool recording: SK 40 -Control: DIALOG 004 Lu8oxopn Sell machine most bidding, in non-parried condition. Machine can be visited in Fellbach near Stuttgart. more
10
X: 1170 mm Bevdr27mf2 Y: 500 mm Z: 370 mm Table size: 1300 x 850 mm Speed range: 31-3150 RPM Spindle holder: SK 40 Control: Dialog 4 Total power: 4 kW Machine weight: 4000 kg Dimensions (W x D x H): 4.1 x 3.8 x 2.1 m Condition: good, ready for use more
4
Yom 1986 Table 1300 x 850 mm Travel (X,Y,Z -Achse) 1170x500x370 mm Spindle: 40 Speeds 31 - 3150 U/min Be7po9t3 Feeds 1-3600mm/min Power supply 50 Hz 3x 380V Motor 5,5KW Weight ca. 4000kg Dimension 4100x3800x2100mm more
6
COVER 42 FP NC Built in 1983, GRUNDIG control dialog 4, Toolholder SK 40, spindle speeds 25-2500 U/min, feed 4 - 2000 mm / min, rapid traverse 4000 mm / min, single step driving 0.01 mm, workspace 1170 x 400 x 370 mm, vertical milling head on headstock 150 mm adjustable, Swivel table, power consumption 13.8 kVA, kW main drive 2.0/4.5. Connection value 22 kVA, weight 3910 kg. Accessories: coolant system, Electr. Handwheel. The machine is in good condition. The machine has now been completed ... more
3
Control Deckel Contour 3 Table Size 900 x 530 mm Table Load 800 kgs Table Left/Right X axis 560 mm Table Rise & Fall Z axis 390 mm Feed Rate 2 -3600 mm/min Speeds 40 - 4000 rpm Be9ug0et9p Spindle Taper ST40 Spindle Rise & Fall 80 mm Head Tilts 45 - 0 - 45 degrees Ram In/Out Y axis 500 mm Fitted with tool clamping Length 8' Width 7' 6" Height 6' 8" Nett Weight Actual. 2,800 Kgs. / 2.76 Tons. more
9
CNC Machine Tool Manufacturer: Lid Type: FP 3 ATC Built: 1989 The machine has an automatic tool changer and can be programmed with a Heidenhain programming language (clear text programming). S3wjbp The machine is in good condition and fully functional. It can be visited in the company. Disassembly must be done by yourself. Shipping possible on request. more
10
The function has not been checked. According to The Encoder, it ran to the very end. With 4th axis ( round table ) Bfaqrm7ogr Technical data: Brand: Lid Type: FP 3 NC Control: Dialog 3 Y.O.M.: 1985 Travel X / Y / Z 400 / 400 / 400 mm Recording SK 40 Round table: Rotatable ( 4th axis ) Pinole stroke 80 mm Spindle speeds 31.5 - 3150 rpm electronic handwheel more
15
CNC milling machine vertical-horizontal Deckel FP5 and Technical condition of the Visual and very good. Bezndcrytl The machine is connected to the power. Control: Dialog 11 Travel "X": 710 mm Travel "Y": 600 mm Travel "with" 500 mm Maximum spindle speed 6300 RPM. Measuring Heidenhain on all axes cooling system central lubrication hydraulic tool clamping taper spindle St40 Full instructions for programming Documentation of the electrical and mechanical more


deckel fp ...
daily

New machines via email!

Stay updated!
8
Internal Article No.: 19059 CNC milling machine with handwheels Bfaiod8ptl Lid FP2 NC Control: Dialog 4 Travel: X 300 / Y 300 / Z 400 Feed: 2 - 3600 mm/min. Tool holder: SK40 + Electronic handwheel with cosentional handwheels The machine is in a well-maintained condition. The vice is not part of the offer. more
6
CNC tool machine lid type FP 4 CC Masch. No. 28070060202 (enclosure No. 20287) built in 1987 HEIDENHAIN TNC 355 CNC path control Routes x 600 mm, Y: 500 mm, w: 500 mm Table size 900 x 520 mm Pinolhub 80 mm ISO 40 spindle adaptor Spindle speed of 0 up to 6000 RPM infinitely variable 2 to 4000 mm/min stepless speed Rapid traverse speed 4000 mm / min Main spindle drive 6 kW Power supply 380 v, 50 Hz -Control HEIDENHAIN TNC 355 with Handwheel -Pinolverschiebung on the vertical head 80 m... more
3
Product description of the manufacturer   Fast printing, scanning, copying and faxing performance, as well as reliable and comprehensive security features tailored to your way of working. With this MFP, you can get important tasks done faster and protect your data from threats. Original HP toner cartridges with JetIntelligence give you a higher range. Yr3qhk   Consumables: Toner cartridge 26A/X (used; original or compatible, subject to availability)   Refurbished used unit - max. 10,000 printin... more
5
CNC milling machine lid FP2NC with dialog 11 control Travel X-axis: 300mm, Y-axis: 300mm, Z-axis: 340mm Pinole stroke: 80mm Weight: 1.6t + control cabinet 300kg Power consumption: 11kVA Area requirement: 2.5 x 3.1m Speed range: 40 - 5000rpm Blieql3e Main drive: 5.5kW With protective enclosure and slat cover Tool holder: SK40 Electr. Handwheel Hydr. Tool tension Manual and programming instructions are available The machine recently became electric again. repaired and is fully func... more
8
Sofort ab Standort frei : CNC Werkzeugfräsmaschine Deckel Type FP 3 NC Baujahr 1986 CNC Steuerung Sinumerik 3 M Tisch 700 x 460 mm Be8vtg2xmy Verfahrwege X / Y / Z 400 / 400 / 400 mm Aufnahme SK 40 Fräskopf schwenkbar plus / minus 90 Grad Pinolenhub 80 mm Spindeldrehzahlen 31,5 - 3150 U / min elektronisches Handrad Schraubstock Zum Preis von Euro 3.000.-- zzgl. Mwst. ab Standort more
2
Tool milling machine lid FP4NC Cw03o2v3 1989 Y.O.M. more
3
Serial number: 2821-1240, Travel: 560 x 500 x 450 mm Control lid dialog 11 Be8nvaayod more
3
Product description of the manufacturer   Be9oivwotr Fast printing, scanning, copying and fax performance as well as reliable and comprehensive safety functions adapted to the way you work. With this MFP, you can do important tasks faster and protect your data from threats. Original HP toner cartridges with JetIntelligence offer you a higher range. Supply Excentant-HP LaserJet Pro MFP M426fdn s/w Multifunction Printer A4 -HP toner cartridge (black) -Short instructions, driver/software CD -230V ... more
13
3-axis portal milling machine with fixed cross beam Travel: X 5570, Y 3260, Z 1153, hydraulically movable quill 300mm Non-simultaneous, indexing axis, resolution 1°: C ± 360° Table: 6500 x 2200mm Passage between the columns: 2700mm Distance spindle nose - table: 400 / 1700mm CNC Heidenhain TNC426CB Feed motors: Indramat AC, rapid traverse X / Y 6m/min, Z 4m/min Milling motor: Siemens AC, 30kW Spindle speeds variable from 20 to 4000 rpm, max. Torque 3050Nm Hydraulic tool clamping taper ... more
6
CNC Univ. tool room milling machine lid type FP 3 AT Masch. Nr. 2831-1009 built CA 1992 CNC contouring GRUNDIG dialog 11 Driveways X: 400 mm, Y: 400 mm, Z: 400 mm Table size 700 x 460 mm ISO 40 spindle adaptor Pull Stud DIN 69872-A Spindle speed 40-4000 RPM 22 levels 2 - 4000 mm/min stepless speed Rapid traverse speed 4000 mm / min Main spindle drive 2 / 3 kW Power supply 380 v, 50 Hz -automatic gear shifting with 22 levels -20 x tool changer -Hydro mechanical tool clamping -adjus... more
7
Sofort ab Standort frei : CNC Werkzeugfräsmaschine Deckel Type FP 2 A Squ0q2it CNC Steuerung Contour 3 Baujahr 1988 Tisch 620 x 390 mm Verfahrwege X / Y / Z 300 / 300 / 400 mm Fräskopf verschiebbar 50 mm Pinolenhub 60 mm Aufnahme SK 40 Spindeldrehzahlen 40 - 4000 U / min Elektronisches Handrad Aufnahmen Zum Preis von Euro 3.500.-- zzgl. Mwst. ab Standort more
4

CNC tool room milling machine Deckel FP 4A

More Deckel Fp 4
Umkirch , GermanyGermany dealership location
18139 km
1990
good (used)
Manufacturer: Lid Type: FP 4A Built: 1990 X-Way: 560 mm Y-way: 500 mm Z-way: 450 mm Control: DECKEL DIALOG 11 Cgcokm7u Speed: max. 4000 rpm Tool holder SK 40 more
2

Milling machine Deckel Maho FP4NC

Schwäbisch Gmünd , GermanyGermany
17972 km
good (used)
Milling machine lid Maho FP4NC Bqwlo8l more
3
Product description of the manufacturer   Fast printing, scanning, copying and faxing performance, as well as reliable and comprehensive security features tailored to your way of working. With this MFP, you can get important tasks done faster and protect your data from threats. Original HP toner cartridges with JetIntelligence give you a higher range.   Consumables: Toner cartridge 26A/X (used; original or compatible, subject to availability)   Refurbished used unit - max. 20,000 printing unit r... more
6
We offer you: CNC Universal Milling Machine Manufacturer: Lid Type: FP 6-100T Control: Lid dialog 11 Rqcbov9i The machine is in very good condition. Location: Norderstedt Changes and errors in the technical data and data as well as intermediate sale reserved!*** more
6
x-Weg 560 mm y-Weg 500 mm z-Weg 450 mm Bdg93c0agj Steuerung DECKEL DIALOG 11 Drehzahl 40 - 4000 U/min Werkzeugaufnahme SK 40 more
5

CNC universal milling machine DECKEL FP5NC

More Deckel Fp 5
Iserlohn, GermanyGermany dealership location
18002 km
1986
good (used)
CNC Universal Fraes Machine Fabr.DECKEL Type: FP5NC Y.O.M.1986 Control DIALOG 4 Travel: X710mm Y600mm Z500mm F0lqecmyg Clamping table: 900mmX500mm Spindle holder: ISO40 Spindle speeds: 2-4000rpm Spindle capacity: 7.5KW 2.Same machines in stock. more
6
In good technical condition. Producer: Friedrich Deckel B, Munich, Germany. Year of production: 1995. X-axis (longitudinal) 560 mm, Y-axis (transverse) 500 mm, Z-axis (vertical) 365 mm. Bewxwqeya0 Total power: 13.8 kVA. Operating voltage: 380 V / 50 Hz. Area demand with safety zone: approx. 2.5 x 3 m. Weight: including vertical headstock, electrical equipment and 2.030 kg steering. more
6
sehr guter gebrauchter Gegenhalter mit Lagerbock Ksu2r7mwp fuer Deckel Fraesmaschine FP 5 NC und5CC more
3
Product description of the manufacturerA web-capable MFP for productive work in the office. HP ePrint lets you print from virtually anywhere, and wireless networking technology paves the way for resource sharing. Business applications improve your workflows. Automatic two-sided scanning and copying also saves time. Consumables contained B0q3ywpm - Used toner cartridge black CF280A/X (used, original or compatible; subject to availability) Refurbished used equipment - the printer has been complet... more
13
We offer you: Nnctd CNC milling machine Manufacturer: Lid Type: FP4MA Location: Braunschweig Changes and errors in the technical data and data as well as intermediate sale reserved!*** more
3
DIALOG 11 Control Travel x: 560 mm Travel y: 450 mm Travel z: 450 mm Pinole stroke 80 mm Tool holder SK 40 Spindle speeds 31.5 - 5000 rpm Ptyegi Pre-shed 2 - 6000 mm/min Rapid speed: 6 m/min Accessories incl. El. Handwheel Coolant device TFT Monitor NEW The machine has been overhauled both visually and geometrically. It is in very good condition. All axes run quietly and precisely. more
8
CNC universal milling machine Fabr.DECKEL type: FP3A control HEIDENHAIN TNC 355 BJ. 1989 Pivoting headstock Spindle retainer ISO40 Spindle speeds up 4000U/min Procedures: X400mmY400mm Z400mm Clamping table: 700mmX460mm Space required: 2mX2mX2m Gewicht.ca. 2000 kg. Complete machines, documentation available Nl0hr Machine from the town of course. more
3
from the dismantling of a lid FP41A: Performance part / performance card Yr3c8k Manufacturer: Siemens Type: 647 013 9410 01 Condition: used / used This offer is aimed at professionals. Prices quoted are net. We are happy to prepare a personal offer for you. To do so, please send us your full contact details. Offer subject to change, intermediate sale reserved. Internal No.: 1268 more
10

NC milling machine DECKEL FP 41 NC DECKEL Germany FP 41 NC

Rotthalmünster, GermanyGermany
17739 km
1983
defective spare-parts repository (used)
We have an older cover milling machine FP 41 NC about year 1983 Machine no. 2382-0120 (documents missing) The machine was no longer under power for about 9 years. You can see in the control cabinet that someone wanted to rebuild the electronics. It was installed (see photo) a computer? We could not touch some cables. At the moment this machine is not functional. May be used as spare parts warehouse. Are you interested in purchasing the entire machine or parts? Please d... more
3
Product description of the manufacturer   Fast printing, scanning, copying and faxing performance, as well as reliable and comprehensive security features tailored to your way of working. With this MFP, you can get important tasks done faster and protect your data from threats. Original HP toner cartridges with JetIntelligence give you a higher range.   Consumables: Toner cartridge 26A/X (used; original or compatible, subject to availability)   Refurbished used unit - max. 40,000 printing unit r... more
10
We offer you: CNC milling machine Manufacturer: Lid Type: FP2NC Rp9cc7w8 Year of construction: 1982 Location: Brunswick Changes and errors in the technical data and information and subject to prior sale! *. more
8

CNC milling machine DECKEL FP 4 A

More Deckel Fp 4
Brügg, SwitzerlandSwitzerland dealership location
18205 km
ready for operation (used)
Technical data Table length 800 mm Table width 460 mm Longitudinal travel (x axis) 485 mm Cross movement (Y-axis) 385 mm G9oaji0fo... more
1
Deckel FP1 X: 300 - Y: 150 - Z: 340 mm 0bgyn87z more
7
Deckel CNC milling machine offered. Type: FP2NC Control unit: Dialogsteuerung 1 X-travel: 300 mm (hand 332) Y-travel: 220 mm (hand 252) Z-travel: 400 mm (hand 432) Speed max: 3150 RPM Table: 620 x 335 mm Spindle: SK 40 Spindle stroke: 100 mm Included documentation and coolant pump Dimensions machine: 150x120x178 cm (LxWxH) Dimensions cabinet: 75x80x120 cm (LxWxH) Nm3nj For more information call us or send an e-mail. more
8
Plotter Bulleri The type FPM 14 22 The axis operating ranges; X = 2200 mm Y = 1400 mm Z = 250 mm Vacuum pump Becker 132/154 m3/h Power elektrowrzeciona 7, 5kw Control and programming on Panel Bosch CC 220 Magazine for 6 tools very close to the spindle Quick change tools included a lot of handles and frezików Bdgzizilme the axis drives on Bosch components very solid machine the machine has a documentation and a floppy disk Efficient machine more
3
Product description of the manufacturer   Fast printing, scanning, copying and faxing performance, as well as reliable and comprehensive security features tailored to your way of working. With this MFP, you can get important tasks done faster and protect your data from threats. Original HP toner cartridges with JetIntelligence give you a higher range.   Consumables: Toner cartridge 26A/X (used; original or compatible, subject to availability)   Refurbished used unit - max. only 5,000 printing un... more
9
Universal milling machine lid FP3 NC with dialog 4 control E29sord more
14

CNC milling machine Deckel FP4 A

More Deckel Fp 4
Mülheim an der Ruhr, GermanyGermany
18042 km
1987
good (used)
Cnc milling machine Fabr. Lid Type: FP4A Bauj: 1987 Control:. Grundig Contour 3 Machine No. 2821-0210 Axles X/Y/Z 560 /500 /450 mm Recording SK 40 Main drive power 2.0 / 4.0 KW Weight 2,750 kg D2grir7 more
1
4 axes controlled 2 spindles gt; horizontal and vertical milling 0fm29ct2 powerful milling for heavy duty passes on large workpieces including spare parts and accessories more
5
Milling machine cover FP 4 NC Xlheqy9up HEIDENHAIN TNC 355 X 900 mm Y 500 mm Z 500 mm Panel good condition more
7
Technical data Operating voltage 380 V/50 Hz Working area FP2NC X 300 mm Y 300 mm Bey8mqbfga Z 340 mm Pino-dub 80 mm Main drive Controlled Asynchronron engine power 5.5 kW Turntable continuously programmable 31.5-5,000 U/min Torque 9Nm/3000 U/min Reprimor 2-4000 mm/min Eilgang 4000 mm/min Tool recording SK 40 Machine weight 1600 kg Switchboard 300 kg more
6
good original condition / needed -Traverse path X approx. 400 mm, Y 400 mm, Z 500 mm -solid angle table -Speed: up to 5000 RPM -Control: Dialog 11 -Milling head swiveling -Sleeve: SK 40 Yrnulg -Weight ca: 2000 kg -Space ca: T: 2.80 m, B: 2.20 m, H: 2.0 m The machine Vice is not included in the offer. Pickup or shipping. We are happy to help to organize a low-cost carrier. You can like to come for a visit. You will receive a regular invoice. Also a net invo... more
6
Stroke X=710 mm, Y=445 mm, Z=600 (plus manual quill stroke 80 mm) Spindle speed 6.300 RPM Beyught This machine is in good condition and is always maintained by us. more


deckel fp ...
daily

New machines via email!

Stay updated!

to

to

Edit search
DECKEL FP 42 NC
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.