Used Deckel G1L for sale (715)

Year of construction: 1969, condition: good (used), Work table Clamping surface 500 x 200 mm distance milling spindle - work table 300 mm longitudinal movement of the table by hand 300 mm transversal movement of the table by hand 160 mm template table stencil table 550 x 324 mm distance pantograph arm - clamping surface 20 mm Rotatable 360 stencil grooves 7 pcs., distance 45 mm Milling spindle spindle speed 1.900 - 15.000 rpm cutting speed 1 - 226 m/min motor speed 2.800 rpm Internal taper of the graver spindle 1:5 Gr. bore of the collet 6 mm Adjustability of the spindle 1 mm fine, 3 mm coarse Pantograph Transmission ratio 1 : 1 to 1 : 50 driving power 0,2 kW Dimensions Required area L x W x H 1400 x 1000 x 1420 mm Weight 260 kg Rsdpfjidckfex Ahvop Accessories / special features: - 1 set of fonts with letters and numbers - stylus

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,183 h, functionality: fully functional, machine/vehicle number: 15035709304, travel distance X-axis: 700 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, The machine will remain powered until 06.03.2026. TECHNICAL DETAILS Travel distances X-axis travel: 750 mm Y-axis travel: 600 mm Z-axis travel: 520 mm C-axis: ±360° B-axis: 180° Spindle type: SK-40 Spindle speed: 18,000 rpm Rotary table Clamping surface: 700 × 500 mm T-slot spacing: 63 mm Number of T-slots: 7 T-slot size: 14 H7 Centering bore: 30 H6 Rotary axis torque: max. 1,674 Nm Table rotation speed: max. 21.5 rpm Swivel torque: max. 2,019 Nm Swivel speed: 18.9 rpm Swivel range: 0 – 180° Input/display unit: 0.001° Maximum tool length from spindle nose: 315 mm Maximum tool weight (with automatic tool changer): 6 kg MACHINE DETAILS Control system: Siemens 840D Shop Mill Operating hours Power-on hours: 65,794 h Spindle hours: 18,183 h Dimensions & Weight Machine dimensions (L x W x H): 2,604 x 2,820 x 2,785 mm Machine weight (including base): 9,255 kg Redpjymmpdsfx Ahvsp EQUIPMENT 5-axis simultaneous machining 32-position tool changer Chip conveyor IKZ (internal coolant supply) with 70 bar Blum TC50 spindle probe

Condition: ready for operation (used), Year of construction: 2004, operating hours: 17,500 h, functionality: fully functional, travel distance X-axis: 830 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain 530 (MC422), rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 830 mm Travel Y-axis: 630 mm Travel Z-axis: 630 mm Feed rates: 15,000 mm/min Rjdpoymn Saefx Ahvep Rapid traverse: 30,000 mm/min Motor spindle: 12,000 rpm Number of tool stations: 32 MACHINE DETAILS Control: Heidenhain 530 (MC422) Weight: approx. 9,000 kg Spindle hours: approx. 17,500 EQUIPMENT Through-spindle coolant (IKZ) Chip conveyor Electronic handwheel Blum laser Flushing device Filtration system Note: The measuring probe is not included in the scope of delivery.

Condition: excellent (used), Year of construction: 2002, Deckel Maho DMU 80 P-Hi Dyn 5-Axis CNC Machining Center Year of manufacture: 2002 Control: Heidenhain 430 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm B-Axis: Automatic swivel milling head C-Axis: NC rotary table: 900x630 mm Redpfx Aex Dlf Rshvsp Workpiece weight: 800 kg Tool holder: SK40 Tool changer: 60 positions Accessories: Chip conveyor High-pressure coolant 40 bar (IKZ) Handwheel Heidenhain TS 642 probe

Condition: ready for operation (used), Year of construction: 2007, operating hours: 23,663 h, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, total height: 2,500 mm, overall weight: 10,600 kg, number of axes: 4, This 4-axis DECKEL MAHO DMC 55H duoBlock was manufactured in 2007. It features X, Y, Z movements of 560 mm, 600 mm, and 600 mm respectively, and a spindle speed of 12000 rpm. The machine includes a SK40 spindle taper, a 60-position tool magazine, and four 400x400 mm pallets with a 1-degree indexed 4th axis. Consider the opportunity to buy this DECKEL MAHO DMC 55H duoBlock horizontal machining centre. Contact us for more information about this machine. Additional equipment • 4 Pallets 400 x 400 included with machine, indexed 4th axis by 1 degree • Workpiece probe • Internal cooling • Large coolant tank with automatically coated filter paper Machine Benefits Technical Machine Benefits Redpfox I S Shex Ahvsp • Table size: 400 x 400 mm • Tool magazine: 60 positions Extra Information Machine still under power Dimensions Machine Depth 6000 mm Technical Specification Through-spindle Coolant Yes

Condition: used, Year of construction: 2001, operating hours: 8,920 h, total height: 2,300 mm, total length: 3,400 mm, total width: 2,150 mm, Empty weight: 6.000 kg Price: On request - Year: 2001 - Documentation available: Yes - └ Type Documentation: User manual, Technical data, Electrical diagrams, Operating system - CE marking present: Yes - CE certificate present: Yes - Serial number: 11120004223 - Operating hours: 8920 - Drive system: CNC - Number of axes [pcs]: 3 - X-axis travel [mm]: 630 - Y-axis travel [mm]: 560 - Z-axis travel [mm]: 560 - Table length [mm]: 1000 - Table width [mm]: 600 - Tool holder: SK40 - Max. spindle speed [rpm]: 10000 - Options: External cooling, Tool magazine - └ Tool magazine [pcs.]: 20 Rsdpfx Asyngkkshvop - Transport dimensions: 3400mm x 2150mm x 2300mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1999, condition: used, Empty weight: 8.000 kg Dimensions (LxBxH): 240 x 300 x 285 cm Price: On request Rsdpfx Asyngkdohvjp - Year: 1999 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 28810006072 - Transport dimensions: 2400mm x 3000mm x 2850mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1999, condition: used, Empty weight: 8.000 kg Dimensions (LxBxH): 240 x 300 x 285 cm Price: On request - Year: 1999 - Documentation available: No Rsdpsyngi Tsfx Ahvjp - CE marking present: Yes - CE certificate present: No - Serial number: 28810005142 - Transport dimensions: 2400mm x 3000mm x 2850mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2007, controller manufacturer: SIEMENS, controller model: 840D Control, number of axes: 4, This 4-axis DECKEL DMC 835 V was manufactured in 2007. It features an NC dividing head EA 410, manual tailstock, and a TS 640 measuring probe. Additional highlights include a coolant/air blast switch, flushing gun for chip removal, and an electronic handwheel. This machine is complete with accessories. If you are looking to get high-quality milling capabilities consider the DECKEL DMC 835 V machine we have for sale. Contact us for more information. Additional equipment • NC dividing head EA 410 • TS 640 measuring probe • Coolant/air blast switch • Flushing gun for chip removal • Electronic handwheel – Operating mode 4 Machine Benefits Technical Machine Benefits • Manual tailstock • Faceplate diameter: 160 • Three-jaw chuck diameter: 160 • Machine complete with accessories Rjdpfxjx D Iu Ue Ahvep • On hour 17275 / spindle hours 5803 Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 1996, operating hours: 23,198 h, controller model: Millplus V400, number of axes: 3, This 3-axis DECKEL MAHO DMU 60T was manufactured in 1996. It features a 24-position tool changer, an NC rotary table, and a spindle speed up to 6300 rpm. The working areas are 600 mm in length, 525 mm in width, and 500 mm in height. It includes a coolant system with a 150-liter capacity. Consider the opportunity to buy this DECKEL MAHO DMU 60T vertical machining centre. Contact us for more information about this machine. Control & Electrical • Control: Millplus V400 • Screen: Color, text in German/English Rjdpfex D Nalsx Ahvop • Operating Voltage: 400 V, 50 Hz • Control Voltage: 24 V • Drive: Digital with overload protectionSpindle & Tooling • Spindle: With quill • Maximum Spindle Speed: 6,300 rpm (speed range with gearbox: 20–6,300 rpm) • Tool Holder: ISO 40 – DIN 69871 • Pull Stud: DIN 69872 Form A • Tool Changer: 24–25 tool positionsWorking Area & Movement • Longitudinal (X) Travel: 600 mm • Cross (Y) Travel: 525 mm • Vertical (Z) Travel: 500 mm • Rapid Traverse X/Y/Z: 18 m/min • Feed Rate: Up to 10,000 mm/min • NC Rotary Table: 3-axis on fixed tableCooling & Accessories • Coolant System Capacity: 150 L • Full Enclosure: Yes • Paint: Gray / Green (NCS)Documentation • 2 sets, GermanThe machine has a 4-axis C-axis (dividing head)

Condition: good (used), Year of construction: 2002, Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 rpm Rjdewglfxopfx Ahvsp Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axes Travel measuring system with correction Clamping surface Ø 700 x 500 mm Max. table load 200 kg Infrared probe for workpiece measurement A lot of aluminum has been machined!

Condition: good (used), Year of construction: 2000, operating hours: 18,082 h, functionality: fully functional, machine/vehicle number: 1098000194, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 900 mm, nominal power (apparent): 46 kVA, controller manufacturer: HEIDENHAIN, total height: 3,200 mm, total length: 8,000 mm, total width: 4,000 mm, table width: 1,000 mm, table length: 1,200 mm, overall weight: 20,000 kg, operating hours of spindle: 10,403 h, number of slots in tool magazine: 60, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, Equipment: chip conveyor, DECKEL MAHO DMU 125 P Universal Machining Center - Tool holder: SK 40 - Table with 9 T-slots Rsdjym Snrspfx Ahvsp The machine is equipped with a 60-position tool changer, including the tool holders shown in the photos installed in the tool magazine, as well as a chip conveyor and coolant system. Attention: Machine vises shown in the photos are not included! Attention: The machine will be disassembled for transport to a width of 2900 mm (removal of tool changer). Attention: The item must be collected on a binding date agreed between 21/04 and 30/04/2026. FCA D-96257 Marktgraitz – loaded onto truck.

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 15025702504, travel distance X-axis: 2,350 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 21 kVA, controller manufacturer: HEIDENHAIN, total height: 2,800 mm, total length: 9,000 mm, total width: 3,200 mm, table width: 500 mm, table length: 700 mm, table load: 310 kg, overall weight: 15,000 kg, spindle speed (max.): 12,000 rpm, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, control voltage: 220 V, Equipment: chip conveyor, documentation/manual, DECKEL MAHO DMU 70 VL Universal Machining Center Rsdpfoym Smbex Ahvep - Tool holder: SK 40 - Input increment X/Y/Z: 0.01 mm - Jog mode X/Y/Z: 20 - 2000 mm/min - Linear scale resolution X/Y/Z: 0.001 mm - Position tolerance in X/Y/Z: 0.010 mm - Working area travel X-Axis (without partition): 2350 mm, with partition: 2 x 710 mm - incl. tool changer, 2 x 32 positions - max. tool length from spindle nose: 315 mm - max. tool weight for automatic tool change: 6 kg - max. total tool weight in magazine: 80 kg - required compressed air: approx. 5.5 - 8 bar Worktables: - NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - max. table rotation speed: 16.73 rpm - swiveling speed: 14.73 rpm - swivel range: 0 to 180° - input/display increment: 0.001° - weight: approx. 310 kg - one fixed table - dimensions: 1000 x 600 mm - T-slot spacing: 63 mm - number of T-slots: 9/14 H7 - incl. chip conveyor and coolant system Note: the machine can be transported on a truck with up to 2800 mm width! Note: The item must be collected between 21.04. and 30.04.2026 at a yet-to-be-agreed date. FCA D-96257 Marktgraitz – loaded onto truck

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025704014, travel distance X-axis: 2,350 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 41 kVA, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,800 mm, total length: 9,000 mm, total width: 3,200 mm, spindle speed (max.): 18,000 rpm, tool diameter: 40 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DECKEL MAHO DMU 70 VL Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Connected load: 41 kVA - Rated current: 80 A - Tool holder: HSK 63 - Input increment X/Y/Z: 0.01 mm - Setup mode X/Y/Z: 20 - 2000 mm/min - Linear encoder resolution X/Y/Z: 0.001 mm - Position tolerance in X/Y/Z: 0.010 mm - Working area travel X-axis (without dividing wall): 2350 mm, with dividing wall: 2 x 710 mm - including tool changer 2 x 32 positions - Max. tool length from spindle nose: 150 mm - Required compressed air: approx. 5.5 - 8 bar - Work tables: 2 x NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - Swivel range: 0 to 180° - Input and display increment: 0.001° - Weight: approx. 310 kg Rodpfx Ahsym Sd Tsvjp - Including all tool holders visible on the photos in the tool changer, as well as chip conveyor and coolant system - Note: The clamping systems on the fixture tables are not included in the scope of delivery. Important: The machine can be transported on a truck up to 2800 mm width! Important: The item must be collected between 21.04. and 30.04.2026 on a binding date to be agreed upon in advance. FCA D-96257 Marktgraitz – loaded onto truck

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total height: 2,800 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 800 mm, table length: 1,500 mm, table load: 550 kg, rotary table diameter: 800 mm, spindle motor power: 20,000 W, Chip conveyor 3D measuring probe Paper filtration IKZ 15 Bar Under power X - Travel: 1060mm Y - Travel: 710mm Z - Travel: 710mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 1500mm Table Width: 800mm Table load: 550 Table Ø: 800mm Feed rate X-Axis: 15000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 20kW Speeds / ranges: 12000Rpm ATC / revolver: 32 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3200mm Redpfx Ajym Sdyohvsp Width: 2900mm Height: 2800mm Weight: 9500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, travel distance X-axis: 760 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, total height: 2,450 mm, total length: 5,200 mm, total width: 4,500 mm, table width: 500 mm, table length: 630 mm, table load: 300 kg, overall weight: 12,000 kg, 5-axis CNC machine (VMC) DECKEL MAHO - DMC 60T MACH-ID 9443 Make: DECKEL MAHO Type: DMC 60T Control: HeidenHain iTNC530 Year: 2005 € 12.500,00 X - Travel: 760mm Y - Travel: 560mm Z - Travel: 560mm A - Axis: 360000° Rsdpfx Ahsym R Tgsvsp B - Axis: - 30 to + 120° Table Length: 630mm Table Width: 500mm Table load: 300 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 5200mm Width: 4500mm Height: 2450mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, With Heidenhain iTNC 530 CNC control Redpfxjym Rnkj Ahvjp Year of manufacture: 2004 Travel paths: X 800 Y 600 Z 700 Spindle speed range: 0 – 12,000 rpm, stepless (SK 40) Including the following accessories: NC rotary tilting table Ø 630 mm Swivel milling head (horizontal + vertical) Universal tool changer with 60 magazine slots as double gripper (SK 40) Full safety enclosure with sliding doors and interior lighting 50 pcs. SK 40 tool holders ICS – 40 bar Chip conveyor Rotoclear 3D measuring probe Heidenhain Electronic handwheel Operating modes 3 + 4 3 height-adjustable machine feet Operating manuals THE MACHINE COMES FROM AN INSTITUTE AND IS IN EXCELLENT CONDITION!! POWER-ON HOURS: 29,496 hrs. PROGRAM HOURS: 10,050 hrs.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 71.255396, travel distance X-axis: 600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller model: MILLPLUS, total height: 2,700 mm, total length: 6,000 mm, total width: 4,000 mm, table width: 630 mm, table length: 900 mm, overall weight: 10,000 kg, number of slots in tool magazine: 30, mount diameter: 40 mm, Equipment: chip conveyor, DECKEL MAHO DMU 80 P Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 80 A - Table with 9 T-slots - Tool holder: SK 40 The machine is equipped with a 30-position tool changer, including the tool holders visible in the photos within the tool changer, as well as chip conveyor and coolant system. Note: The machine vice shown on the clamping surface is not included in the scope of delivery! Note: The item must be collected between 21/04 and 30/04/2026 at a bindingly agreed appointment. FCA D-96257 Marktgraitz – loaded onto truck Redpsym Rk Ssfx Ahvsp

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 2300-0053, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, rotational speed (max.): 2,000 rpm, overall weight: 1,000 kg, No minimum price – guaranteed sale to the highest bidder! Bidding obligates you to collect the item within the specified periods, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. Rsdpfx Ahjym Nwdevep TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 400 mm Travel range Z-axis: 300 mm Spindle speed: 40 – 2,000 rpm Table dimensions: 1,000 x 520 mm Number of T-slots: 6 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,500 x 1,900 mm Weight: 1,000 kg EQUIPMENT Swivel table Three-axis digital readout (Heidenhain) New bellows New handwheels External reference: Oberthür

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Rjdpsym Nb Asfx Ahvop Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 2013, x-travel 635 mm y-travel 510 mm z-travel 460 mm control Sinumerik 840 D SL Siemens turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm tension force 8 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - distance 100 mm T-slot - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg table height over floor 720 mm distance spindle nose and table 120 - 580 mm number of toolpositions 30 pos. Max. mould width 80 / (130) mm max. tool length 250 mm max. tool weight 6 kg max. total weight 80 kg change-time tool to tool 1,6 sec change-time chip to chip 6,0 sec rapid traverse 30 m/min feed speeds 1 - 20.000 mm/min Feed force max. 5 kN total power requirement 28 kVA weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 4,0 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 635 V New Design - ShopMill Rsdpfsym Dz Rex Ahvep - WITHOUT perforated plate - WITHOUT clamping device - WITHOUT tools

Condition: used, Year of construction: 1994, x-travel 600 mm y-travel 500 mm z-travel 450 mm Redpfsvvcc Usx Ahvop control Dialog 11 31,5-5.000 U/min 7,5 kW SK 40 Ø 500 mm 30 Stück 6 m / min. m/min 4,3 t dimensions 3,5 x 2,4 x 2,2 m Universal Milling- and Boring Machine - full covered - coolant system - tool changer - external hand wheel

Condition: ready for operation (used), Year of construction: 2005, operating hours: 18,700 h, controller manufacturer: SIEMENS, controller model: Sinumerik, table load: 3,100 kg, overall weight: 24,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 35,000 W, tool weight: 6,000 g, number of axes: 3, This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2005. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Additional equipment • Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open Machine Benefits Technical Machine Benefits • Feed speed: up to 20000 mm/min • Clamping surface: 3100 × 900 mm • T-slots: 9 pieces, 100 mm apart • Tool magazine capacity: 30 places • Resolution of measuring system: 0. 001 mm • Electrical connections: mains connection 3n/pe~400/230 v, 50/60 hz; power consumption 82 kva • Pneumatics: compressed air 5. 5-8 bar; air volume 25 m³/h (without cooling), +20 m³/h with cooling • Weight (kg): with accessories: up to 29280 kg Extra Information Room Temperature: +15°C to +35°C Humidity: 20-75% Tool magazine size 120 -Magazine cabinet Rodpsx Nr Tusfx Ahvsp -Tool change is performed via a shuttle -Tool holder only on request and subject to availability (extra) -Machine is a 3-axis machine (rotary table not available) A further configuration or the AB is no longer available. Z-axis brake defective, roller shutter in machine room defective, screen cable defective

Condition: not inspected (used), Year of construction: 2000, operating hours: 26,350 h, functionality: unexamined, machine/vehicle number: 71401453, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: MILLPLUS, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! Submission of a bid obligates timely collection either between 11.05.2026 and 13.05.2026, or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Max. spindle speed: 12,000 rpm X-axis feed rate: 20 – 15,000 mm/min Y-axis feed rate: 20 – 15,000 mm/min Z-axis feed rate: 20 – 15,000 mm/min Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rsdpfoym Aucox Ahvep Rapid traverse Z-axis: 40 m/min Linear encoder resolution X-axis: 0.001 mm Linear encoder resolution Y-axis: 0.001 mm Linear encoder resolution Z-axis: 0.001 mm Input increment X-axis: 0.001 mm Input increment Y-axis: 0.001 mm Input increment Z-axis: 0.001 mm Positioning tolerance X-axis: 0.010 mm Positioning tolerance Y-axis: 0.010 mm Positioning tolerance Z-axis: 0.010 mm Tool holder: SK 40 Max. tool diameter: 100 mm Max. tool length from spindle nose without tool breakage control: 350 mm NC rotary table clamping surface: 630 mm diameter T-slot spacing: 63 mm Number of T-slots: 9 Centering bore: 50 mm diameter Max. table rotation speed: 10.7 rpm Table feed rate: 3,600°/min Table encoder resolution: 0.001° MACHINE DETAILS Control: MILLPLUS Operating voltage: 400 V Frequency: 50 Hz Rated current: 80 A Connected load: 44 kVA Dimensions & Weight Dimensions (L x W x H): 5,500 x 4,500 x 2,500 mm Weight: 10,000 kg Recorded spindle hours: 26,350 h EQUIPMENT 60-position automatic tool changer Chip conveyor Coolant system Note: The machine can be transported on a truck with a width of 3,000 mm. External reference: Elos – Lot 6

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 815, spindle speed (max.): 8,000 rpm, overall weight: 600 kg, workpiece length between centers: 336 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection, either between 11.05.2026 and 13.05.2026, or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Universal indexing head center height: 170 mm Tailstock center height: 120 mm (with intermediate support: 170 mm) Maximum workpiece length between centers: 336 mm Workpiece diameter with cantilevered mounting: approx. 600 mm Maximum tip length: 950 mm Internal taper of the dividing spindle: Morse 4 / Unified 40 T-slots: 12 mm (machine base) T-slots: 8 mm (additional elements) Grinding stroke: 190 mm Transverse movement of tool holder: 100 mm Vertical movement of grinding head: 325 mm Tool holder movement range: 230 mm Indexing device on tool slide: 330 mm Grinding head mount rotation: 360° Tool holder rotation: 360° Grinding head rotation: 360° Universal attachment rotation: 360° Three-phase motor: 0.7 / 0.85 kW DC motor: 1.3 kW Spindle speed: 4,000 / 8,000 rpm Infinitely variable DC speed: 2,000–10,000 rpm MACHINE DETAILS Operating voltage: 380 V Rsdpfx Aeym Alhehvep Frequency: 50–60 Hz Rated current: 14 A Dimensions & Weight Dimensions (L x W x H): 1,400 x 900 x 1,900 mm Weight: 600 kg EQUIPMENT Two-axis digital display Extensive range of accessories suited to the machine External Reference: Segato