Used Deckel Dialog for sale (690)

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 Hodpox It Rxofx Ah Njng - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Condition: good (used), Rotary table, rotary indexing table, dividing head, dividing head Hnsdpfxeb A Itpo Ah Neg -Clamping surface: Ø 305 mm -Height: 120 mm -Dimensions: 420/370/H120 mm -Weight: 50 kg

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 30000452, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill travel distance: 60 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 600 mm, table width: 210 mm, overall weight: 710 kg, table load: 200 kg, Equipment: documentation/manual, DECKEL FP1 – completely overhauled in 2012 by FPS (Germany), equipped with Heidenhain digital display, tool cabinet with accessories, and dividing head. Since the overhaul, the machine has seen very light use and is therefore in like-new condition. About FPS: Specialized in the complete refurbishment of DECKEL machines. MANUFACTURER: DECKEL MODEL: FP1 CONDITION: Overhauled (2012) – mechanically and electronically as new! LOCATION: Graz (Austria) IMAGES/VIDEOS: For additional photographs and videos of the machine in operation, please contact us. Description: This high-quality DECKEL FP1 milling machine has been completely refurbished, with both mechanical and electrical components upgraded to the latest standards. A new CE-compliant control cabinet was installed in accordance with current statutory requirements (BGVA 3 / DIN-EN 60204-1, new machinery standard). During the overhaul, the control system, drive package, and drive motors were all replaced and brought up to date. The modernization also included the installation of a new, touch-safe control panel and new motor. Technical data: Operation: manual, with option for automatic positioning Control: 3-axis Heidenhain digital readout Spindle speed range: 40 – 2000 rpm (geometrically stepped, 16 speed stages) Feed rate: 10 – 500 mm/min (stepless adjustment) Rapid traverse: 1.2 m/min (stepless adjustment) Quill: Vertical & horizontal extension 60 mm, SK40 Travel (X/Y/Z): 300 / 150 / 340 mm Table size: 600 × 210 mm Table load: max. 200 kg Machine weight: 710 kg incl. angle table and milling head Footprint: 1600 x 1400 x 1750 mm (W / D / H) Equipment: Hodjxywhcopfx Ah Nong Vertical and horizontal spindle Milling head manually swivels ± 90° Completely new electrics and drive packages Overhauled – mechanically and electronically as new Extras: Z-axis bellows Special paintwork Highlights: Heidenhain digital readout for precise operation During overhaul, entire control system, drive package, and drive motors were renewed Contact us to arrange a viewing appointment.

Condition: used, Year of construction: 2002, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, table width: 1,250 mm, table length: 800 mm, Bridge type Machining Centre DMG DMC 100 V Hi-Dyn - 18.000 rpm - corse 1000x800x650 mm - CNC HEIDENHAIN i530 Manufacturer DECKEL MAHO Model DMC 100 V Hi-Dyn Year 2002 Condition Used Stock Number CL092 Working table size 1250x800 mm Longitudinal travel x axis 1000 mm Cross travel y axis 800 mm Vertical travel z axis 500 mm Hnodpox I N Rzsfx Ah Nsg Measurement system HEIDENHAIN optical scales Working feed x-y-z axes 0 - 35.000 mm/1' Rapid feed x-y-z axes 50.000 mm/1' Spindle taper type 40-Din 69871 Automatic tools change nr. 30 Spindle speed 0- 18.000 rpm Spindle motor power 15 Kw Cnc HEIDENHAIN i530 Approx net weight 00.000 Kg Accessories Chip conveyor

Condition: used, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, total height: 3,200 mm, total width: 3,600 mm, total length: 4,900 mm, overall weight: 3,300 kg, Accessories: tool changer for tools coolant system coolant & oil tank hydr. Tool clamping for quick and easy tool change - horizontal / vertical sliding head for changing the active tool in the program during processing Spindle 40 SK RPMs 18-6300 rpm Hsdpfxox Ni Hfe Ah Nsng Volt 380 V Hertz 50 Hz

Condition: used, Year of construction: 2001, operating hours: 7,343 h, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, The DECKEL MAHO DMU 50T machining center is a machine that enables the rapid and precise production of complex components using multiple tools. The machine can use multiple tools in a single cycle, automatically fed to the spindle as needed. A single machine can perform operations such as drilling, milling, threading, and reaming. Control of such a machine is entrusted to CNC control systems, the most efficient control system used in machining. Technical data of the DECKEL MAHO DMU 50T machining center : Hnjdpfxjx Nm Tie Ah Njg -Year of construction 2001 -Number of working hours: 7343 -Heidenhain TNC 426/430 control -Axis: X500 Y400 Z400 C and B axis -Table 700x500mm -Spindle speed 20 - 9,000 rpm -Tool magazine 16-items -SK40 tool holder

Condition: used, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: TNC 426, SPECIFICATIONS Brand Deckel Maho Machine no F677 Type DMC 103 V CNC Brand Heidenhain CNC Type TNC 426 Table length 1.200 mm Table width 600 mm X 1.000 mm Y 600 mm Z 600 mm Spindle taper ISO40 Speed minimum 0 RPM Speed maximum 8.000 RPM Maximum table load 800 kg Chip transport Machine size 2.800 x 2.450 x 2.500 mm Machine weight 7.900 kg Hnodpfsx I Rnnox Ah Njg Tool magazine positions: 24

Condition: good (used), Cross table, cross-sliding table, clamping table, clamping plate with T-slots, clamping angle Hsdob A Ix Ejpfx Ah Neng -Cross table for lid type: KF12 -Table surface: 400 x 400 mm -Travel path: x 50 mm/y 65 mm -Weight: 60 kg

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 560 mm z-travel 560 mm weight of the machine ca. 8500 kg Hodpfx Aexzk Rysh Nong

Condition: used, Year of construction: 1991, x-travel 500 mm y-travel 400 mm Hsdetqp Tvepfx Ah Nong z-travel 400 mm Control Heidenhain TNC 113 total power requirement 4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2*2*2 m No. 5152 Universal tool milling machine Deckel FP 4 M (K) - 2203 Working area: 500 x 400 x 400 Drive: 4 kW Spindle holder SK 40 / DIN-2080 Speed range 50 - 2,500 min-1 Feed rates 8-630 mm/min stepless Rapid traverse 1.3 m/min Fixed table 800 x 460 mm Chip tray Heidenhain TNC 113 Active Digital readout Space requirement approx. 2 x 2 x 2m Weight approx. 1,500 kg

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Active Heidenhain Digital Display and Infinitely Variable Feed – Excellent Condition Technical Data: >> Year of manufacture: 1982 Machine No.: 2201-5598 >> Rotary-swivel tilting table (newly planed) >> Spindle speed: 25 – 2,500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes Hodpfsx Ig Dxsx Ah Neng >> Drive power: 2.0 / 4.0 kW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head on spindle carrier adjustable by 200 mm >> Vertically and horizontally extendable quill – SK40 >> Drawbar system M16 >> Weight approx. 1,500 kg Equipment & Accessories: >> 3-axis active Heidenhain TNC113 digital readout >> Coolant system >> Central lubrication About the machine: For sale is a Deckel FP3 universal milling machine in excellent condition. The machine has minimal backlash on the handwheels and all spindles move smoothly. On this newer FP3 model, the feed is infinitely variable on all three axes, and it features rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain distance control, you can input dimensions which the machine automatically moves to. Oil has been changed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site. The machine is available immediately.

Condition: good (used), Year of construction: 2007, Equipment: chip conveyor, Technical Data DECKEL MAHO Seebach GmbH 4 Technical Data 4.1 Main Drive 18,000 rpm AC servomotor motor spindle Torque available at the spindle, considering efficiency – see diagram Motor power at 100% duty cycle – see diagram Motor power at 40% duty cycle – see diagram Spindle speed infinitely programmable: 20 to 18,000 rpm Setup mode speed: 20 to 800 rpm Performance diagram 02.273697 18,000 rpm star-delta connection Torque Nm Power kW 4.3 Feed Drive AC servomotors for X, Y, Z axes Feed rate X/Y/Z infinitely programmable up to 20,000 mm/min Input increment X/Y/Z: 0.01 mm Rapid traverse X/Y/Z: 50 m/min Setup mode X/Y/Z: 20 to 2,000 mm/min 4.5 Position Measuring System Resolution X/Y/Z: 0.001 mm Position tolerance X/Y/Z with direct measuring system: 0.010 mm 4.6 Working Area Travel X axis: 750 mm Travel Y axis: 600 mm Travel Z axis: 520 mm 4.7 Main Drive Working spindle: SK HSK Tool holder: steep taper SK 40 DIN 69871 A Tool clamping: hydraulic/mechanical 4.8 Tool Changer with Magazine SK Working spindle: 18,000 rpm Magazine positions: 92 Tool length from spindle nose: 315 mm Max tool weight (automatic change): 6 kg Max total tool weight in magazine: 270 kg Retention studs 4.9 Work Table NC rotary table with swivel axis Clamping surface rotary axis: 500 x 500 mm Centering bore: 50 H6 Hjdpfxex N H T Nj Ah Nong Max table plate speed: 21.5 rpm Max torque rotary axis: 1,674 Nm Max swivel torque: 2,019 Nm Swivel speed: 18.9 rpm Swivel range: 180 degrees Input/display increment: 0.001 degrees Weight abt. 310 kg Max. table load (centered): 250 kg Max. workpiece diameter: 628 mm Max. workpiece height: 500 mm 4.10 Pallet Changer 2 pallets with pitch hole grid Rotary movement: 180 degrees Longitudinal travel: 350 mm Lift: 75 mm Permissible load (one sided): 250 kg Permissible load (both sides): 500 kg 4.11 Installation Data Electrical supply according to EN 60204-1 Machine connection: TN S system L1 L2 L3 N PE Main connection: 3N PE, 50/60 Hz, 400/230 V Rated current at 100% duty cycle: 82 A Power consumption at 100% duty cycle: 57 kVA Max. pre-fuse: 100 A Pre-transformer Free cable length above floor: 0.8 m Connection cable as per DIN 5710 VDE 0100 Pneumatic Supply Compressed air, condensate-free and dust-free Recommended filter fineness: 50 μm Air volume without blow air: 50 m³/h Additional blow air for tool cooling: 25 m³/h Air pressure: min. 5.5 bar, max. 8 bar Pressure connection (machine side): Bosch 1823 351 01

Condition: ready for operation (used), Deckel Maho 27073757 / a Touch Panel for Deckel Maho CNC 432 control, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Hodpfx Ahei D Upce Nsng

Condition: ready for operation (used), Year of construction: 2002, General Data Hnjdpfxjx H Uzio Ah Njg Machine weight 6800 kg Control Unit Brand SIEMENS Main Drive Number of axis 3 Movement X-Axis Movement 640 mm Z-Axis Movement 500 mm Y-Axis Movement 600 mm This 3-axis DMG DECKEL MAHO DMC 64 V linear was manufactured in 2002. It features a 640 mm X-axis, 600 mm Y-axis, and 500 mm Z-axis. The table size is 850 x 600 mm, equipped with a 30-tool magazine and SK40 taper. It operates with a Siemens control system and weighs 6,800 kg. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 64 V linear machine we have for sale. Contact us for more information. Application Types Milling

Condition: reconditioned (used), Year of construction: 1996, Tool and cutter grinder Hnedpfx Ahsx Hx Els Neg Make: Deckel Model: S0 Year of manufacture: 1996 – workshop tested Machine no.: 26617 Accessories: - Grinding wheel with flange - Operating manual Used as seen The machine technically corresponds to the condition of its year of manufacture.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 2351, travel distance X-axis: 490 mm, travel distance Y-axis: 370 mm, spindle speed (max.): 2,000 rpm, table width: 255 mm, table length: 900 mm, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to business liquidation. Placing a bid obligates the buyer to collect the machine promptly between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Travel on X-axis: 490 mm Travel on Y-axis: 370 mm Spindle speed: 40 – 2,000 rpm Tool holder: SK 40 Automatic spindle head movement: 290 mm Manual spindle head movement: 300 mm Manual milling spindle height adjustment: approx. 100 mm Table dimensions: 900 x 255 mm Feed range: 10 – 500 mm/min Rapid traverse: 1,500 mm/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,500 x 1,900 mm Weight: 1,500 kg Hodjxqm Aqepfx Ah Njng EQUIPMENT 3-axis digital readout Machine vice mounted (jaw width 160 mm)

Condition: used, Year of construction: 2008, x-travel 800 mm y-travel 800 mm z-travel 800 mm Control iTNC 530 Heidenhain Max. rpm 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 / 82 Nm tool taper HSK-A63 swivellable B: 0 - 190 ° swivle time 1,2 s table diameter 900 x 700 mm max. table load 1.400 kg rotatable C: 360 ° number of toolpositions 40 pos. Hedpfsukwatsx Ah Nsng tool taper HSK-A63 change-time chip to chip ca. 5,0 sec rapid traverse ( X / Y / Z ) 60 m/min rapid traverse B: 30 m/min rapid traverse C: 30 m/min feed speeds max. 60.000 mm/min total power requirement 64 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 6,5 x 6,5 x 3,5 m 5 Axis CNC-Machiningcenter Universal DECKEL MAHO - DMU 80 P duoBLOCK - 5-Axis - Swivel-Milling-Head - Rotary-Table

Condition: good (used), Year of construction: 2007, Manufacturer DMG Model DMC 835 Year of manufacture 2007 Control Siemens 840D / Shop Mill X-axis travel 835 mm Y-axis travel 510 mm Z-axis travel 510 mm Spindle speed 10,000 rpm Feed rate Programmable up to 15 m/min – rapid traverse 30 m/min Positioning tolerance 0.008 mm Tool magazine 30 positions High-pressure coolant (IKZ) and chip conveyor Weight approx. 6.5 t Hnjdpsx N H I Tjfx Ah Nog

Condition: ready for operation (used), Deckel Maho 5100027000 Touch Panel for Deckel Maho CNC 432 control, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Hsdpfei D Upgjx Ah Njng

Condition: ready for operation (used), Year of construction: 2001, operating hours: 16,799 h, Control Unit Brand HEIDENHAIN Main Drive Hnsdpfx Ahox H U D Rs Neg Number of axis 5 Spindle Speed 12000 RPM Tool taper SK 40 Movement X-Axis Movement 800 mm Z-Axis Movement 600 mm Y-Axis Movement 700 mm This 5-axis DECKEL MAHO DMC 80 U hi-dyn was manufactured in 2001. It features a rotary speed of up to 12,000 rpm, a B-axis automatic swivel milling head, and a C-axis NC rotary table measuring 900 x 630 mm. The machine includes a 60-position tool magazine, Heidenhain control system, dual pallet changer, and an internal coolant supply at 40 bar. Consider the opportunity to buy this DECKEL MAHO DMC 80 U hi-dyn universal machining centre. Contact us for more information. Application Types Milling

Condition: excellent (used), functionality: fully functional, machine/vehicle number: Typ: 2034 Nr. 374, spindle mount: MK 2, Angular milling spindle for Deckel FP1 and FP2, D70, D80 mm, for Deckel milling machines FP1 and FP2. The angular milling spindle is rotatable 360 degrees. The angular milling spindle is used. The spindle is in very good condition. This is an original Deckel angular milling spindle, Type: 2034, No. 374. The spindle has only been used by us for precision work. Technical data of the angular milling spindle: Tool milling spindle with MK2 (Morse taper 2) tool holder, for collets: Morse taper 2 with internal thread. The spindle is supplied with a reducing sleeve. Reducing sleeve: (reducing sleeve for FP1) Outside diameter = 80 mm Inside diameter = 70 mm (A reducing sleeve is not required for FP2) Hsdoxk T Hiepfx Ah Nsng Weight: Weight 6.5 kg (tool milling spindle) Weight 0.8 kg (reducing sleeve) Total weight 7.3 kg Price: Ex works Payment: Cash on collection, or payment in advance. Delivery: Shipping by DHL parcel service is possible. Self-collection is possible. Terms of delivery: We deliver according to the Machineseeker standard contract, Standard purchase contract for used machinery from Machineseeker. A standard contract can be downloaded from Machineseeker. Delivery time: Available immediately.

Condition: used, x-travel 500 mm y-travel 200 mm z-travel 400 mm table surface area 700 x 300 mm Hnsdpfx Ahex Hay Dj Njg tool taper SK 40 - S20 feed 8 - 400 mm/ min rapid traverse in X und Z 1200 mm / min turning speeds 40 - 2000 U/min total power requirement 2,2 kW weight of the machine ca. 1400 kg dimensions of the machine ca. 1500 x 1200 x 1600 mm Includes 2-axis digital display Heidenhain

Condition: used, Year of construction: 2006, x-travel 800 mm y-travel 800 mm z-travel 800 mm Control iTNC 530 Heidenhain Max. rpm 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 / 82 Nm tool taper HSK A63 swivellable B: 0 - 190 ° swivle time 1,2 s table diameter 900 x 700 mm max. table load 1.400 kg rotatable C: 360 ° number of toolpositions 60 pos. tool taper HSK A63 change-time chip to chip ca. 5,0 sec rapid traverse ( X / Y / Z ) 60 m/min rapid traverse B: 30 m/min rapid traverse C: 30 m/min feed speeds max. 60.000 mm/min total power requirement 64 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 6,0 x 6,5 x 3,2 m 5 Axis CNC-Machiningcenter Universal Hodpotqmmzsfx Ah Njng DECKEL MAHO - DMU 80 P duoBLOCK - 5-axis simultaneous - Swivel-Milling-Head - Rotary-Table

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table Hjdpfxov R E Rde Ah Nsng - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: ready for operation (used), Year of construction: 2005, Main Drive Hodpfx Aex Hbmfsh Nsng Number of axis 5 Media Chip conveyor Yes Movement X-Axis Movement 780 mm Z-Axis Movement 630 mm Y-Axis Movement 560 mm This DMG DECKEL MAHO DMC 60T was manufactured in 2005. A Universal machining centre, it offers robust construction and reliable performance for precision machining tasks. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60T Universal machining centre. Contact us for more information. Application Types Milling