Machining center - Vertical

Deckel Maho DMU 125 T UNTER STROHM

Condition: good (used), Year of construction: 2008, 1 used vertical machining center Manufacturer: Deckel Maho Model: DMU 80 monoblock Year of manufacture: 2008 Control: ITNC 530 Gtedpfoxa Eudox Agbst Technical specifications X travel: 980 mm Y travel: 630 mm Z travel: 630 mm Control: iTNC 530 Total power requirement: 10 / 15 kW Machine weight approx.: 9.5 t Space requirements approx.: 4*4*2.5 m Additional information Equipment: Electronic handwheel Operation mode 4 Manual swivel milling head Motor spindle 12,000 rpm SK 40 / Clamping DIN 69872 32-tool magazine Fixed table 1250 x 700 mm Chip conveyor Coolant system

Condition: used, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, Milling machine, second-hand Make: Fadal Model: 904-1 VMC 3016 Year of manufacture: Serial No. 9401487 Technical data: X-travel 762 mm Y-travel 406 mm Gjdpstud Utofx Agbjtt Z-travel 508 mm Spindle holder: SK 40 Spindle speed 8000 rpm Machine weight: 3800 kg

Condition: like new (used), Year of construction: 2012, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, Measuring range: X=500mm, Y=500mm, Z=500mm Length measurement deviation E0 in µm E0/E40 in µm MPE according to ISO 10360-2:2009 2.4 + L/300 at 18°C – 22°C C99 control unit with BP26_SE operator panel Equipment: VAST XXT sensor 6-position probe changer magazine 4-position probe changer rack Calibration sphere with certificate Machine file, technical documentation, operating manual Various probes Godpfxettza Re Agbstt HP workstation and monitor Additional accessories Software: Calypso Basic CNC Upgrade to the latest Calypso version and additional options possible

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Reishauer RZ 362A with approx. 60 sets of diamond wheels Grinding worm dimensions: Min/Max. outside diameter: 280/350 mm Width: 84/104 mm Max. module with restrictions: MOD 8.0 (DP 3.2) Number of starts: with restrictions up to 3 Max. usable width (axial shift): 90 mm For detailed technical information, please refer to the attached PDF file. Accessories: Dressing device Approx. 60 sets of diamond wheels Gsdpfx Ajxb Ufuogbott Grinding stones Turbo separator

Condition: good (used), BYSTRONIC HYDRAULIC BENDING MACHINE 3100X150 TON, MAX STROKE 315 mm, RAPID STROKE DOWN 190 mm/s, WORKING CYCLE 10 mm/s, RAPID STROKE UP 150 mm/s, DIMENSIONS: 415X200X290cm (h) WEIGHT 11,000 KG Y1 Y2: hydraulic cylinder axes. X forward and backward axis of the register. Gtjdpjvxipgofx Agbot R upward and downward axis of the register. Z1 and Z2 axes of the movement to the right and left of the stops. X1 or relative X which is the axis of the movement forward and backward of a single stop. 7 axes. The control also manages the hydraulic crowning, which can be considered the eighth axis.

Year of construction: 1999, condition: ready for operation (used), Travel X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, speed: 7000rpm, tool holder: SK50, power: 30kW, tool positions: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19700kg, control: Mazatrol 640M PC-Fusion-CNC. Including 2-fold pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection is possible. Gedpfxsvnd Suo Agbstt

Condition: good (used), Year of construction: 2018, Manufacturer: INDUCTAFLEX Type: AL-3e Control system: ACCURATE touch screen Year of construction: 2018 3 rolls driven servo Torq each roller 3500 nM Electrically support rolls Intelligent software : Ellipse program U Bend shapes control of tangents Auto section detector Specifications Metric US Standard Horizontal and Vertical Horizontal Axis Ø 105 mm Number of rollers Gsdpovd Dftefx Agbjtt 3 Stroke X axis 0 - 400 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2700 mm weight 3300 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, TECHNICAL DETAILS Gedpfjup Hw Ejx Agbett - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 17.5 [kW] - Spindle speeds : 18.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 915 / 500 / 500 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 20 [m/min] TOOL CHANGER - Tool magazine capacity : 28 TABLE - Table dimensions : Ø 630 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3620 x 3160 [mm] - Machine height : 3000 [mm] - Machine weight : 7300 [kg] MACHINE HOURS - Number of working hours : 48894 [h] EQUIPMENT - CNC : Heidenhain iTNC 530 - Coolant tank - Chips conveyor - Oil mist extractor : ELBARON - Cooling unit : HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe : Renishaw - Tool breakage detection : BLUM

Condition: excellent (used), New 2008 Swing over bed - 600 (Ø 23.62) Diameter × length - Ø 300 × 600 (Ø 11.81 × 23.62) Max. diameter - Ø 380 (Ø 14.96) Max. travel range of Z/X axis - 600 / 240 (23.62 / 9.44); Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore - STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed - Gtodjrfx Tnspfx Agbst STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Chuck diameter - STD: Ø 8” ; OPT: Ø 10” Hydraulic Tailstock – travel 465 (18.3) MT. No.4 VDI Tool stations - OPT: 8 STD: 10 Coolant Chip conveyor Power requirement - 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Floor area (L × W × H) - 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Gross weight (approx.) - 5200 kg (11440 Ibs)

Year of construction: 2002, condition: excellent (used), GILDEMEISTER LATHE CTX 420 V6 SIEMENS 840 MATR. 2260000551 YEAR OF CONSTRUCTION 2002 SIEMENS 840 NUMERICAL CONTROL C- and Y-axis WITH 12-POSITION MOTORIZED TURRET RADIAL VDI 40 EQUIPPED WITH: 1) THROUGH CYLINDER DIAMENTRO 66 2) SELF-CENTERING CHUCK AUTOBLOK MOD. 250-66 BHD ON THE MAIN 1) AUTOBLOK SELF-CENTERING CHUCK MOD. 175/52 BHD ON THE COUNTER SPINDLE Gedemv H Dxspfx Agbett 1) CHIP CONVEYOR 1) 5-BAR COOLANT PUMP 1) WORKPIECE UNLOADING ARM TRUNCATED FROM BAR