Used Dec Board for sale (13,149)

Condition: new, Year of construction: 2024, type of input current: three-phase, sheet thickness steel (max.): 2 mm, total width: 3,000 mm, total length: 32,000 mm, total height: 2,400 mm, coil weight: 6,000 kg, The roll forming line for the production of Scaffolding Systems. The line produces a perforated scaffolding profile in 24 stations. The line consists for Decoiler, Staightener, Servo Feeder, Mechanical Press, Perforating and Embossing Tool / Die and Roll Form Machine. For more, please contact us. Guodpfx Ajtq Sb Rsfioh

Condition: used, Length: 3,80 m Guodsgri Nropfx Afieh Height: 1,80 m Width: 1,40 m Lifting capacity: 1500 kg Electric motor: 1,1 kW Board package lifting table.

Condition: ready for operation (used), Packing and stacking machine for sawn wood. Roller conveyor system to handle the ready made packages are also included in the delivery. The unit can be feeded with a belt conveyor also included Guedpjk T Aqwsfx Afijh or unscrambler ( not included )

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Gujdjnygvrjpfx Afish Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Year of construction: 2020, condition: ready for operation (used), Preowned machine. 100% checked and working. Including 1x SMEMA cable Gujdpfxovtpaho Afieh

Year of construction: 2014, condition: not inspected (used), Distribuition Board CTP_PWR2_400 Magnus Interlook Board Drum Driver Module Output Rollers Gsdshcz Hxjpfx Afisuh

Condition: new, Year of construction: 2024, functionality: fully functional, Danfoss FU Frequency Converter FC-100 Safe Stop Control Card 130B1150 Guedpsv R D D Asfx Afijh Only for frequency converters using software version 7.xx or later. 2 units available, price per card.

Condition: used, kW: 2,2 Lift arms: 1350 mm Width: 2700 mm Godpegri A Eefx Afijuh The board lift is in working order. Used for pack lifting before planer.

Condition: used, Board sorting line for both wet and dry sawn wood with 41 fall pockets and hydraulically operated bottom discharge. Capacity approx 50000 m3 of sawn wood per year and single shift Line consist of below main parts: - Intake for both dried/wet packages or directly from sawline. - Pocket section with overlaying conveyor for boards and bottom side conveyor. - Lumber stacker with automatic laying of sticks between the layers. Gedevirfrepfx Afieuh - Press and strapping system for ready made packages - Chipping station for off cuts.

Condition: excellent (used), ARBURG Circuit Board 533 C B 41 SN 94. 519 Gujdem Dtlzjpfx Afijh S-N 97.940 NR. 00202

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 03013, BERCAR plank cutter, maximum cutting length 1100mm, maximum cutting height 170mm. 10 hp engine. Gedpfjvvpb Rjx Afieuh

Condition: good (used), board edging installation with entrance and tunnel 1. Manual entrance with roller conveyor 2.Board edger : Brand : REMMONAY Year : 1996 Drive: 1 x 132 kW 4 variable saws and 1 fixed arm (4 variable products) Gusdpfx Aepug Dhefijh Lasers Siemens touch screen with division Cutting depth (mm) 18 - 120 mm Max length : 6m 3. side products separator with tunnel 4. Long boards (up to 12,50m) cutting station with entrance deck, cutting saw, ejection and conveyor to bring the cut board (< 6m) to the edger loading deck 5. Electric cabinet Everything is in operation on a daily basis in our sawmill until beginning of 2024

Condition: used, The stamp machine was used in the planing line. Gujdpogri Ncefx Afijh

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,797 h, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, swivel angle B-axis (min.): -30 °, swivel angle B-axis (max.): 90 °, TECHNICAL DETAILS Control: MillPlus iT Heidenhain X travel: 880 mm Y travel: 630 mm Z travel: 630 mm B axis: -30° / +90° C axis: available Spindle and Drive Spindle speed: 20 - 12,000 rpm Spindle taper: SK 40 DIN 69871 Torque at 40 % / 100 % duty cycle: 28 / 19 kW Table and Workpiece Table size: 1,250 x 700 mm Table load capacity: 650 kg NC rotary table: Ø 800 mm Gedpfjxf A E Rex Afijuh Tool Magazine Tool change system: 2 × 16 positions MACHINE DETAILS Operating hours: 43,802 h Spindle hours: 17,797 h Total power requirement: 44 kW Machine weight: 9.5 t Space requirements: 3.50 × 3.20 × 2.60 m Coolant system standard volume: 250 liters EQUIPMENT - Renishaw OMP60 probe - Rotoclear - Rinse gun - High-pressure pump - Chip conveyor - Air filtration system - ICS (internal coolant supply)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,510 h, functionality: fully functional, machine/vehicle number: 11670000823, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 180, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Drive: Variable-speed asynchronous motor with liquid cooling Control: Sinumerik 840D powerline Work spindle Tool holder: HSK-A63, hydraulic-mechanical tool clamping Spindle speed: 0 – 10,000 rpm, continuously programmable Feed Drive: AC brake motors on the X, Y, Z, and B axes Feed range on the X, Y, and Z axes: 0 – 60,000 mm/min Rapid traverse on the X, Y, and Z axes: 80 m/min Measuring system Resolution on the X, Y, and Z axes: 0.001 mm Position tolerance on the X, Y, and Z-axis: 0.008 mm Pallet Number: 2 Size: 630 × 630 mm Hole pattern: 108 × bushing Ø 16.02 H6 Centering bushing: Ø 16.02 H6, 38.5 mm deep NC rotary table Gsdpsxf Htxofx Afisuh Max. tabletop rotation: 30 rpm Tabletop holding torque at 40% duty cycle: 5,000 Nm Tabletop holding torque at 100% duty cycle: 3,250 Nm Workpiece weight Per pallet: max. 800 kg Difference with different loads: max. 800 kg Tool magazine Type: Vertical chain magazine HSK-A63 Positions: 180 Tool changing system: Double gripper Max. tool diameter standard: 80 mm Max. tool diameter with free adjacent positions: 160 mm Max. Tool length from spindle nose: 550 mm Max. tool weight: 12 kg Max. magazine load: 630 kg MACHINE DETAILS Space requirement: 6.0 x 6.0 m Height: 3.2 m Weight: 18 t Power requirement: 71 kVA Machine dimensions: approx. 4.7 x 5.6 x 3.2 m EQUIPMENT - Internal coolant supply - Chip conveyor - Belt filter system - Cooling unit - Rotoclear - Tool breakage detection (laser) - Mist separator - Measuring probe - Handheld control unit - Flushing gun - Blow-air cooling system - 4-color signal lamp - Dynamic package

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,421 h, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 18000 Tool taper BT40 Number of axis 5 Movement Gedpsxfcqyjfx Afisuh X-Axis Movement 2500 mm Y-Axis Movement 920 mm Z-Axis Movement 820 mm This 5-axis DECKEL MAHO DMF 250 linear was manufactured in 2006. It features a Heidenhain iTNC530 control, extensive travel capabilities with X2,500mm, Y920mm, Z820mm, and a high-speed spindle at 18,000rpm. The machine includes a BT40 spindle taper, ATC 30 magazine, and full NC rotary capabilities on A, B, and C axes. Consider the opportunity to buy this DECKEL MAHO DMF 250 linear universal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 1988, DECKEL S11 tool grinding machine - good condition - Scope of offer according to photos - EXW CH-4528 Zuchwil Technical data Clamping surface of the tool slide: 500 x 180mm Max. Tool diameter between the tips: 130mm Max. Tool diameter with flying clamping in the universal dividing head: 620mm Max. Tool lengths between centers: 270mm Guodpfer Elwksx Afieh T-slot machine stand: 12mm T-slot grinding head, tool slide and accessories: 8mm Sanding stroke: 190mm Sanding stroke for twist sanding: 190mm Cross adjustment of tool slide: 100mm Vertical adjustment of sanding head: 325mm Longitudinal adjustment of grinding spindle: 5mm Tool carrier: 220mm Grinding head support: 800mm Universal dividing head on tool slide: 330mm Sanding head support: 360 degrees Sanding head: 360 degrees Tool carrier: 360 degrees Three-phase drive motor: 1.1KW at 2800 rpm Spindle speeds: Infinitely variable 2000 to 12000 rpm Max. Grinding wheel diameter: 125mm Max. Cutting wheel diameter: 200mm Weight: approx. 800 kg Dimensions: 800 x 1100 x 1760mm Space requirement: 2.5 x 2.3 m No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: reconditioned (used), Universal tool milling machine Make: harich (DECKEL) Model: B (FP 2) reconditioned with CE geometric acceptance with test report with guarantee Accessories: - 3-axis digital display FAGOR Innova 30i-M - fixed table or universal table - vertical milling head SK 40 - coolant system - operating instructions CE and safety equipment: - new machine electronics with control cabinet - cover cap on the vertical milling head with electrical protection Gusdodvdczopfx Afijh - chuck protection hood with electrical protection - drive motor with braking function - control panel with emergency stop, release, start and stop buttons - new documentation for machine and control cabinet - CE declaration of conformity

Condition: good (used), functionality: fully functional, DECKEL FP1 Active milling machine Manufacturer: Deckel Type: FP1 Active Condition: very good Control type conventional Control active HEIDENHAIN TNC X-path 300 mm Y-path 160 mm Z-path 340 mm Tool holder SK40 Gedpfxjxnniao Afieuh Speed 40-2000 rpm. Control Active HEIDENHAIN TNC Total power requirement 2 kW Machine weight approx. 0.73 t Space requirement approx. TBH 1200x1100x1600 mm

Condition: used, Year of construction: 2012, x-travel 500 mm y-travel 450 mm z-travel 400 mm Gedpfx Afsw Tm R Uoijuh control SIN840D SL B - axis -5 / +110 x 0,001 ° C-axis 360 x 0,001 ° feed X/Y/Z/-axis 1 - 24.000 mm/min rapid traverse X/Y/Z 24,00 m/min spindle turning speed - stepless 20 - 10.000 U/min power capacity at 40 % load 13,00 KW power capacity at 100 % load 9,00 kW tool taper SK40 toolpiece magazine: chain magazine 30 Stück diameter of tools max. 80 mm tool diameter with 2 vacant positions 130 mm tool length - max. 300 mm weight of tools max. 6,00 kg table surface area 630 x 500 mm workpiece weight 200 kg total power requirement 17,00 kW weight of the machine ca. 6,00 t dimensions of the machine ca. 4,50 x 4,00 x H2,90 m 5-axis machining center with SIEMENS Sinumerik 840D SL control, swivel rotary table, tool magazine 30-positions, HEIDENHAIN touch probe, linear scales X/Y/Z, chip conveyor, electronical handwheel, 2nd work-area-door. Machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: Heidenhain Mill Plus, table width: 500 mm, table length: 500 mm, rotary table diameter: 500 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,618 h, coolant supply: 40 bar, spindle nose: SK40 (DIN69871), number of slots in tool magazine: 60, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The 5-axis DMU50 eVolution has been removed from production in working order and can also be seen in operation in our showroom (by appointment). Guedpfx Aoxnixisfish The machine is equipped with 40 bar internal spindle cooling, chip conveyor, 60-tool changer, Renishaw tool setter, Heidenhain 3D probe, 18,000 RPM spindle, Visiport, and original factory extraction system.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,339 h, Main Drive Number of axis 3 Media Chip conveyor Yes Internal cooling Yes This 3-axis DMG DECKEL MAHO DMU 60 monoBlock was manufactured in 2005. It features a chip conveyor and a coolant system, ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 60 monoBlock machine we have for sale. Contact us for more information. Godpfxexa H R To Afieuh Application Types Milling

Condition: good (used), Year of construction: 2006, TECHNICAL DATA Main drive Speed: Infinitely programmable: 18`000 rpm In set-up mode: 20 - 800 rpm Work spindle: Hollow shank taper: HSK-A63 Tool clamping: Hydraulic Feed drive Linear motor: X-axis AC servomotors: C, B, Y, Z Feed speed X, Y, Z: Up to 20`000 mm/min Rapid traverse Y, Z: 50 m/min Godpfx Aju Hkb Rsfieuh X: 80 m/min B: 40 rpm C: 50 rpm Position measuring system Resolution: C, B, X, Y, Z: 0.001 mm Position tolerance: C, B, X, Y, Z: 0.010 mm Working range X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955 ° C-axis: n x 360 ° Tool changer with double gripper Magazine slots: 120 Max. Tool diameter without free spaces: 80 Max. Tool diameter with free spaces: 130 Max. Tool length from spindle nose: 300 mm Max. Tool weight: 6 kg NC rotary table with swivel axis C-axis: Clamping surface rotary axis (mm): 500 x 380 mm Distance of T-slots / size: 63 / 14 H7 Centering bore: 30 H6 Max. Torque: 1491 Nm Max. Rotation of the table top: 50 rpm B-axis: Max. Swivel torque: 1864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955 ° Input and display precision: 0.001 ° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6800 kg Installation weight: Approx. 7500 kg Dimensions: 4170 x 3133 x 2560 mm SCOPE OF OFFER U.A: (list not exhaustive): Deckel Maho DMU 50 Evo CNC machining center Heidenhain iTNC 530 Tool breakage control Blum measuring probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 10915551234, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, total height: 2,900 mm, total length: 4,000 mm, total width: 3,000 mm, overall weight: 9,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, mount diameter: 40 mm, TECHNICAL DATA & EQUIPMENT: Operating voltage: 400 V Frequency: 50 Hz Rated current: 100 A Connection: 48 kVA Rapid traverse in B-axis: 40 m/min Rapid traverse in C-axis: 50 m/min Measuring system: Resolution in C, B, X, Y, and Z axes: 0.001 mm Position tolerance in C, B, X, Y, and Z axes: 0.010 (with direct measuring system) Travel range B-axis: 0-161.955° Travel range C-axis: 360° Max. tool diameter without free adjacent positions: 80 mm Max. tool diameter with adjacent free positions: 130 mm Max. tool length from spindle nose: 300 mm Max. tool weight for automatic tool change: 6 kg Gedpfx Afjxninqoisuh NC rotary table with swivel axis (C-axis) Clamping surface (rotary axis): 500 x 380 mm T-slot pitch: 63 mm/14h7 Centering bore: 30 mm diameter h6 Max. torque rotary axis: 1491 Nm Max. table plate speed: 50 rpm B-axis: Max. swiveling torque: 1864 Nm Swiveling speed: 40 rpm Swivel range: 0-161.955° Load capacity: approx. 420 kg Max. load positioned in table center: 200 kg Including zero-point clamping system by SCHUNK and clamping rail Rail length: 490 mm Jaw width: 90 mm Including chip conveyor, extraction filter by SARA PICK-UP INFORMATION: Pick-up must be scheduled firmly between December 10th and 12th FCA Winterlingen, loaded onto truck

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,265 h, General Data Measurements width 2530 mm Measurements depth 2050 mm Measurements height 2650 mm Machine weight 5500 kg Control Unit Brand Siemens Model Sinumerik 810D Powerline Main Drive Spindle speed range 10000 rpm Number of axis 3 Gedpfx Afoxnr Hieisuh Movement X-Axis Movement 635 mm X-Axis Rapid Traverse 25–30 m/min Y-Axis Movement 510 mm Y-Axis Rapid Traverse 25–30 m/min Z-Axis Movement 460 mm Z-Axis Rapid Traverse 25–30 m/min Table Table load 600 kg Tools Max tool diameter 80 mm Max tool length 300 mm Type of tool holder SK40 This 3-axis DMG DECKEL MAHO DMC 635V eco was manufactured in 2011. It features a Siemens Sinumerik 810D Powerline control system, a tool holder SK 40, and a tool magazine with 20 positions. The machine offers a spindle speed of up to 10,000 rpm and a rapid traverse speed of 25 to 30 m/min in X/Y/Z axes. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V eco vertical machining centre. Contact us for more information about this machine. Application Types Milling