Used Deburring Machines for sale (65,832)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 1600mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 5,000 mm, total width: 2,200 mm, total height: 2,600 mm, overall weight: 8 kg, input voltage: 380 V, table length: 4,300 mm, table width: 1,600 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 1,600 mm, workpiece length (max.): 2,000 mm, table height: 1,000 mm, space requirement width: 300 mm, input current: 70 A, Core Advantages ✅ 1600mm ultra-wide processing width for large-size workpiece batch production ✅ 3-in-1 multifunction: deburring, chamfering and wire drawing, one machine for multiple uses ✅ Full-automatic one-pass processing, high efficiency and stable precision ✅ Wide adaptability for various metal materials and industrial scenarios ✅ Adjustable parameters to support customized finishing effects ✅ Heavy-duty structure, low failure rate and excellent cost performance Core Performance & Functional Features 1. 1600mm Ultra-Wide Working Width for High-Volume Production Featuring a full 1600mm effective processing width, this machine supports one-time integral finishing for large metal sheets and wide workpieces that traditional narrow-width machines cannot handle. It accommodates full-width continuous feeding as well as batch processing of small and medium-sized parts, delivering excellent production flexibility and strong compatibility. The optimized conveyor system ensures stable, synchronous workpiece transmission across the entire width, avoiding position deviation, incomplete finishing and inconsistent precision. It minimizes repeated clamping and positioning procedures, shortens production cycles, and is perfectly suited for mass processing of large-format sheet metal components. Chjdpfjz Ii H Djx Abaed 2. Full-Automatic Precision Deburring (Zero Burr Residue) Equipped with high-density flexible abrasive brush groups and multi-directional grinding assemblies, the machine provides dead-angle-free all-round deburring for upper surfaces, lower surfaces and cutting edges. It thoroughly removes hard burrs, flash, cutting slag and oxidation layers produced in metal cutting and stamping processes. Adopting intelligent adjustable speed and constant-pressure control, the system adapts to different metal materials and varying burr thicknesses for targeted finishing. It removes sharp edges completely without damaging workpiece base materials or original dimensional tolerance, delivering smooth, clean surfaces that meet strict industrial assembly and precision manufacturing standards. 3. Adjustable Precision Chamfering for Standardized Edge Finishing The equipment supports customizable edge chamfering and rounding treatment with freely adjustable angle and size. It achieves uniform, smooth chamfering on straight, curved and irregular workpiece edges, solving the inconsistency, low efficiency and poor precision of manual chamfering. The high-precision fixed-angle machining structure ensures identical chamfer accuracy for every workpiece. Optimized edge finishing removes sharp edges effectively, improving workpiece safety, assembly fit and surface quality. It is widely applicable for mechanical parts, hardware components, electrical enclosures, automotive sheet metal and general metal fabrication products. 4. Uniform Wire Drawing Finishing for Premium Metal Texture Built with a professional wire drawing module, the machine produces delicate, consistent and aesthetic linear textures on stainless steel, carbon steel, aluminum alloy, copper and other metal surfaces. It effectively removes tool marks, grinding scratches, oxidation traces and uneven surface flaws. Wire drawing depth and surface roughness are precisely adjustable to achieve fine straight wire drawing, matte wire drawing and customized surface effects.

Year of construction: 2003, condition: used, Technical details: workpiece length: 130 - 2000 mm diameter min.: Ø 10 mm diameter max.: Ø 60 mm control: Fagor 10/102 S dimension machine xH: 3,8 x 3,8 x 1,9 m dimensions electric cabinet LxWxH: 1,2 x 0,6 x 2,2 m machine weight ab.: 4 500 kg Milling and deburring machine CNC of pipe ends or round steel on both sides. - Material feed via conveyor belt, travel distance approx. 3 300 mm. - Brush unit type PGAS 8/100 V-HV both sides/opposite, speed 10 000 rpm. (drive via compressed air) - Cutter holder, both sides/opposite - milling spindle and brush holder arranged one behind the other Chjdpfou Ngc Nsx Abasd - Operation via control panel on the switch cabinet Support: - 2 x, 1x movable and 1x fixed - Lateral displacement of the right support Length 1725 mm by hand - Working paths transverse=5 - 50 mm; longitudinal=5-50 mm - Working spindle = speed max. 320 rpm *

Condition: new, diameter -- mm workpiece length -- mm work piece width 15 mm range of angles 15-50 ° plate thickness 6-40 mm total power requirement 1,5 kW Feed speed 3,5 m/min. dimensions 530 x 395 x 860 mm weight of the machine ca. 94 kg The UZ15 RAPID machine is one of the fastest beveling machines with automatic feed on the market. It is not only suitable for workshops, but also for assembly work. It has a stepless Chedpfx Abok Uqhaoaed Bevel angle adjustment system. Also, the machine with an automatic feed equipped. Working with the UZ15 Rapid is therefore very convenient. - For conventional steel (up to a strength of 600 MPA/ 87022PSI), brass, copper and aluminum materials - For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm - Application range of sheet thickness 6 - 40 mm - The bevel angle can be easily adjusted from 15° to 50° continuously without that a part needs to be replaced - Double-sided bevel (X, K) without material handling - Easy connection to the 3D manipulator for easier operation and handling - Silent working - Equipped with automatic feeder - Stationary or mobile use - The machine works with large workpieces without any support a speed of 3.5m/min - Smaller workpieces are placed directly in the machine - Reduced price when purchasing UZ15 RAPID together with the 3D manipulator

Condition: new, Year of construction: 2026, -TFON Precision Edge Rounding & Finishing System. -Designed for superior surface finishing and edge rounding across a wide range of materials and industries, the TFON system combines advanced automation with versatile configurations to meet your exact production needs. -Material Compatibility: Suitable for aluminium, stainless steel, and mild steel applications. -Wide Thickness Range: Efficiently processes materials from 0 to 120 mm thick. -Finishing Excellence: Engineered to deliver high-quality surface finishes that enhance product aesthetics and functionality. Industrial Versatility: Ideal for medical devices, commercial kitchen equipment, automotive parts, and metal accessories industries. Edge Rounding Precision: Provides precise Radius 2 edge rounding, improving safety and enhancing the final product appearance. Advanced Automation: Integrated Siemens control system ensures enhanced precision and operational reliability. Independent Processing Stations: Enable flexible, efficient multi-stage processing tailored to complex workflows. Multiple Table Width Options: Available with table widths of 650 mm, 1000 mm, or 1300 mm to accommodate diverse production requirements. Customisable Conveyor Options: Choose from vacuum, semi-magnetic, or semi-vacuum conveyor systems for safe and secure part handling. Surface Cleaning: Effectively removes rust, oxides, and surface contaminants to prepare parts for downstream processing. Improved Operator Safety: Edge rounding station minimizes risks of cuts and injuries from sharp edges. High-Performance Finishing: Equipped with Scotch abrasive technology to deliver smooth, even finishes. Extended Abrasive Life: Pneumatic oscillation system maximizes abrasive band and Scotch abrasive longevity, reducing downtime. Chsdpfxjhq A Txj Abaod Consistent Radius Output : Six flap wheels ensure uniform edge radii on every part for consistent quality. Engineered for performance. Designed for safety. Built for industrial versatility. TFON – Surface perfection, every time.

Condition: new, diameter 150 mm workpiece length 1300 mm work piece width 800 mm max. dia. of grinding wheel 150 mm milling-head swivable +/- 180° work height max. 945 mm turning speed range 0 - 1400 U/min engine output 1.5 kW weight of the machine ca. 230 kg. dimensions of the machine ca. 1435 x 1100 x 1510 mm The "Easy T" is the cost-effective alternative to the conventional ones grinding and deburring machines. His head consisting of a grinding wheel and a flap brush, can be swiveled by 180°. Thus, a faster Switching between the aggregates possible. Due to the weight-bearing arm the head can be easily moved Cedpexab Hpofx Abajhd over the workpiece. The result is one even edge rounding. The pad also prevents slipping of the smallest components. Furnishing : - Deburring and rounding of laser-cut or stamped sheet metal parts - Grinding head, consisting of a grinding wheel & a flap brush, can be swiveled by 180° - Working area 800 x 1300 mm - Weighted arm for easy pivoting - non-slip table pad - Ergonomic operation of the machine with the help of push buttons "On/Off" - Grinding head with infinitely variable speed via frequency converter - Handle for ergonomic handling

Condition: new, Year of construction: 2026, functionality: fully functional, # ADV M300 – Manual Deburring & Edge Rounding Machine The ADV M300 is a compact and flexible machine for deburring, edge rounding, grinding and surface finishing of small sheet metal parts. Thanks to the large worktable, integrated vacuum clamping and ergonomic 360° swivelling arm, the machine is particularly suitable for small parts and varying production batches. The dual-function working head can be rotated 180°, allowing the operator to quickly switch between grinding and brushing. ## Main Features * Deburring, edge rounding, grinding and surface finishing Chodpezwqu Dsfx Abasd * Suitable for steel, stainless steel, aluminium and other sheet metals * 360° swivelling mechanical arm * 180° rotating grinding/brush head * Integrated vacuum clamping for small parts * Pneumatically balanced grinding head * Integrated dust extraction * Quick and easy tool changes * Compact design and simple operation ## Technical Specifications Model: ADV M300 Worktable: 1,200 × 750 mm Vacuum working area: 300 × 300 mm Grinding motor: 1.1 kW Mechanical arm: 1,200 mm / 360° Working range: 0.5–260 mm Disc brush: Ø150 / Ø165 mm Vacuum power: 3 kW Total motor power: 4.1 kW Dimensions: approx. 1,300 × 900 × 1,500 mm Machine weight: approx. 400 kg ## Flexible Finishing One side of the working head can be equipped with an abrasive tool for grinding and removing heavier burrs. The other side can be fitted with a brush for deburring, edge rounding and surface finishing. Simply rotate the head 180° to change between operations. The integrated 300 × 300 mm vacuum area securely holds smaller workpieces during processing. ## Service & Availability Besten Machines provides service, technical support, spare parts and consumables from our locations in the Netherlands and Germany. Contact us for current availability, a quotation or a demonstration with your own workpieces.

Condition: new, Year of construction: 2026, functionality: fully functional, ADV 508 RYW 800 EU – Deburring & Edge Rounding Machine The ADV 508 RYW 800 EU is a powerful automatic machine for deburring, edge rounding and surface finishing of laser-cut, plasma-cut and punched sheet metal parts. The combination of a wide grinding belt, rotating brushes and disc brushes allows efficient processing of both outside contours, inside contours and holes. Expected in stock from September 2026 and available for demonstrations in our showroom. Main Features 800 mm working width Deburring, edge rounding and surface finishing Wide belt grinding unit for burr removal 4 rotating brushes for multidirectional processing 7 disc brushes for edge rounding of contours and holes Suitable for steel, stainless steel and aluminium Vacuum and magnetic workpiece holding Servo-controlled height adjustment Siemens / Delta PLC control Touchscreen HMI Technical Specifications Model: ADV 508 RYW 800 EU Working width: 800 mm Material thickness: 0.5–100 mm Minimum workpiece: 50 × 50 mm vacuum / 30 × 30 mm magnetic Feed speed: 0.5–7 m/min Grinding belt: 2,000 × 820 mm Grinding belt motor: 15 kW Grinding belt speed: 0–15 m/s Rotating brushes: 4 × Ø300 × 300 × 40 mm Rotating brush motors: 2 × 2.2 kW Disc brushes: 7 pcs. Disc brush motors: 7 × 1.1 kW Disc brush speed: 0–24 r/s Disc brush oscillation: 0–30 mm adjustable Vacuum pump: 15 kW Chsdpfxozwqwfo Abaod Height adjustment: Servo-controlled Control: Siemens / Delta PLC Operating panel: Touchscreen HMI Power supply: 3~ 380 V / 50 Hz Complete Finishing in One Pass The wide grinding belt removes heavier burrs and prepares the surface. The rotating and disc brushes subsequently process the workpiece from multiple directions, providing consistent edge rounding on external contours, internal contours and holes. This makes the RYW configuration particularly suitable for companies processing a wide variety of complex sheet metal components where consistent and reproducible finishing is required. Service & Availability The ADV 508 RYW 800 EU is expected in stock from September 2026 and will then be available at short notice. The machine can be viewed and demonstrated in our showroom by appointment. Besten Machines provides technical support, spare parts, consumables and service from our locations in the Netherlands and Germany. Contact us for a quotation or demonstration with your own workpieces.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, working width: 950 mm, sheet thickness (max.): 120 mm, working height: 120 mm, control type: CNC control, Equipment: CE marking, TECHNICAL DETAILS Station 1: Sanding belt Station 2: Rotary brush Station 3: Rotary brush Min. sheet thickness: 0.5 mm Max. sheet thickness: 120 mm Working width: 950 mm Working height: 0.5-120 mm MACHINE DETAILS Power: 39 kW Control: CNC Number of stations: 3 Dimensions & Weight Dimensions (L x W x H): 3,940 x 1,980 x 2,010 mm Net weight: 7,000 kg Chedpfx Aey Hhp Tobaed Transport packages: 4 EQUIPMENT CE marking

Year of construction: 1997, condition: used,

Condition: new, diameter of brush Ø 250 mm width of brush 80.0 mm turning speed range 1450 U/min bore Ø 24.0 mm Wire thickness 0.3 mm Dust suction hood 50.0 mm voltage 400 Volt engine output ca. 3.0 kW weight of the machine ca. 90.0 kg range L-W-H 820 x 450 x 1140 mm The BES 250 D brush deburring grinder is ideal for deburring the inner and outer edges of profiles and flat materials. Thanks to its powerful drive motor and robust construction, this machine is ideally suited for professional use in workshops. Product Features - Ball-bearing-mounted rotor ensures smooth operation and a long service life - Ideal for deburring cut edges, removing rust from metal surfaces, . and removing paint coatings,... - Comes standard with a 50 mm diameter suction port for connecting to a . dust extraction system - Powerful and low-noise drive motor - Low-vibration operation thanks to a sturdy, torsion-resistant machine housing - Heavy-duty construction and high-quality components Chjdpfxoz D Itze Abajd * Ideal for commercial and industrial use Scope of Delivery - Round wire brushes - Adjustable workpiece support - Base frame

Condition: used, Deburring machine with brushes, tube deburring machine, BAUER Type BE 1 Csdohrkrwopfx Abashd Machine No. Year of manufacture 2005 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Power supply 380 volts, 50 Hz - Material support - New deburring brush Space requirement L x W x H 550 x 450 x 440 mm Weight 65 kg In good condition

Condition: excellent (used), Rolei PEF 500 deburring and bevelling machine, basic model in interated in table (1200 x 788 mm, width x depth) made of aluminum profiles Chodpegkwckefx Abaed

Condition: new, Year of construction: 2026, functionality: fully functional, ADV 508 RW 300 CN – Deburring & Edge Rounding Machine The ADV 508 RW 300 CN is a compact automatic machine for deburring, light edge rounding and surface finishing of laser-cut, plasma-cut and punched sheet metal parts. The combination of a wide belt grinding unit and rotating brush provides fast burr removal and consistent edge finishing in a single pass. The machine is particularly suitable for parts with larger outside contours. Expected in stock from September 2026 and available for demonstrations in our showroom. Main Features Deburring, light edge rounding and surface finishing Wide belt grinding unit for efficient burr removal Rotating brush for multidirectional edge processing Particularly effective on outside contours Suitable for steel, stainless steel and aluminium Servo-controlled workpiece height adjustment Variable feed speed Compact 300 mm working width Delta PLC control 7" touchscreen Technical Specifications Model: ADV 508 RW 300 CN Working width: 300 mm Material thickness: 0.5–80 mm Minimum workpiece: 50 × 50 mm with vacuum table / 30 × 30 mm with magnetic table Feed speed: 0.5–7 m/min Chjdpfx Aszwqvuebaod Grinding unit: 1 × wide grinding belt Grinding belt: 1,650 × 320 mm Grinding belt motor: 5.5 kW Brush unit: 1 × rotating brush Rotating brush: Ø300 × 300 × 40 mm Brush motor: 2.2 kW Vacuum pump: 5.5 kW Height adjustment: Servo-controlled Control: Delta PLC Operating panel: 7" touchscreen Power supply: 3×380 V / 50 Hz Efficient Deburring & Edge Rounding The wide belt removes burrs and provides an even surface finish. The following rotating brush processes the workpiece from multiple directions for light and consistent edge rounding. This RW configuration is especially suitable for flat sheet metal parts with larger outside contours and limited complex internal contours, making it an efficient solution for repetitive production. Typical applications include machine construction, steel fabrication, enclosure manufacturing and general sheet metal processing. Service & Availability The ADV 508 RW 300 CN is expected to arrive in stock in September 2026 and will then be available at short notice. The machine can be viewed and demonstrated in our showroom by appointment. Besten Machines provides installation, technical support, spare parts, consumables and service from our locations in the Netherlands and Germany. Contact us for a quotation or demonstration with your own workpieces.

Condition: new, Year of construction: 2026, functionality: fully functional, ADV 508 RW 630 EU – Deburring & Edge Rounding Machine The ADV 508 RW 630 EU is a powerful automatic machine for deburring, edge rounding and surface finishing of laser-cut, plasma-cut and punched sheet metal parts. The combination of a wide belt grinding unit and rotating brushes provides efficient burr removal and consistent edge rounding in a single process. Suitable for steel, stainless steel and aluminium. Expected in stock from September 2026 and available for demonstrations in our showroom. Main Features 630 mm working width Wide belt grinding unit for burr removal 4 rotating brushes for multidirectional edge rounding Vacuum and magnetic worktable Suitable for steel, stainless steel and aluminium Variable feed speed Siemens / Delta PLC control Large 21" touchscreen Technical Specifications Model: ADV 508 RW 630 EU Working width: 630 mm Chodpjzwqv Usfx Abaed Material thickness: 0.5–100 mm Minimum workpiece: 50 × 50 mm vacuum / 30 × 30 mm magnetic Feed speed: 0.5–7 m/min Grinding belt: 1,900 × 650 mm Grinding belt motor: 11 kW Rotating brushes: 4 × Ø250 × 300 × 40 mm Brush motors: 2 × 2.2 kW Disc brushes: 5 pcs. Disc brush motors: 5 × 1.1 kW Vacuum pump: 7.5 kW Conveyor drive: 1.5 kW Worktable: Vacuum + magnetic Control: Siemens / Delta PLC Operating panel: 21" touchscreen Power supply: 3~ 380 V / 50 Hz Efficient Deburring & Edge Rounding The wide grinding belt efficiently removes burrs and prepares the surface. The rotating brush system then processes the workpiece from multiple directions, creating consistent edge rounding on outside contours. The combined vacuum and magnetic table provides reliable workpiece holding for both magnetic and non-magnetic materials. Service & Availability The ADV 508 RW 630 EU is expected in stock from September 2026 and will then be available at short notice. The machine can be viewed and demonstrated in our showroom by appointment. Besten Machines provides technical support, spare parts, consumables and service from our locations in the Netherlands and Germany. Contact us for a quotation or demonstration with your own workpieces.

Condition: new, Year of construction: 2026, functionality: fully functional, ADV 508 RW 1000 EU – Deburring & Edge Rounding Machine The ADV 508 RW 1000 EU is a powerful automatic machine for deburring, edge rounding and surface finishing of laser-cut, plasma-cut and punched sheet metal parts. Chjdpfx Abszwqwroaod With a 1,000 mm working width, wide belt grinding unit and 6 rotating brushes, the machine provides consistent processing of outside contours and reproducible results on steel, stainless steel and aluminium. Expected in stock from September 2026 and available for demonstrations in our showroom. Main Features 1,000 mm working width Wide belt grinding unit for efficient burr removal 6 rotating brushes for multidirectional edge rounding Vacuum and magnetic worktable Suitable for steel, stainless steel and aluminium Frequency-controlled drives Siemens / Delta PLC control Large 21" touchscreen High-quality European industrial components CE certified Technical Specifications Model: ADV 508 RW 1000 EU Working width: 1,000 mm Material thickness: 0.5–100 mm Grinding system: Wide belt grinding unit Rotating brushes: 6 pcs. Worktable: Vacuum + magnetic Control: Siemens / Delta PLC Operating panel: 21" touchscreen Drives: Frequency controlled Power supply: 400 V / 50 Hz Certification: CE Efficient Deburring & Edge Rounding The wide grinding belt efficiently removes burrs and prepares the surface. The six rotating brushes subsequently process the workpiece from multiple directions for consistent edge rounding. The combined vacuum and magnetic table provides reliable workpiece holding for both magnetic and non-magnetic materials. Service & Availability The ADV 508 RW 1000 EU is expected in stock from September 2026 and will then be available at short notice. The machine can be viewed and demonstrated in our showroom by appointment. Besten Machines provides technical support, spare parts, consumables and service from our locations in the Netherlands and Germany. Contact us for a quotation or demonstration with your own workpieces.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0312101, working width: 550 mm, overall weight: 3,000 kg, power: 32 kW (43.51 HP), TECHNICAL DETAILS Number of stations: 1 Station type: Belt grinding Chodpfszrmqqsx Abasd Maximum working width: 550 mm MACHINE DETAILS Power: 32 kW Control system: Conventional Machining process: Dry Dimensions & Weight Dimensions (L x W x H): 1,700 x 2,700 x 2,900 mm Dry weight: 3,000 kg Shipping packages: 2 EQUIPMENT CE marking

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 153200 € 2895.48 € 1350 mm 0,4 - 120 mm 1370 x 2200 mm 6000 m³/h 150 mm 6 bar 4200 mm 2300 mm 2350 mm 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP * Machine made of stress-free welded steel construction for stable and rigid structure * Work table with motorised height adjustment via 4 synchronised spindles. * Independent drive motors for each work group. * Hoods for extraction inside the machine, one per station. Touch screen for: * Automatic star-delta connection of the main motors * Digital display for sheet thickness with decimal point tolerance * Material thickness adjustment (+/- 0.1 mm) * Machine condition monitoring with alarm messages FEEDING SYSTEM * Robust steel structure, wear-resistant surface. * Vacuum conveyor belt on request * The table raises and lowers from 780 mm to a maximum height of 950 mm above the floor. The power of the motor for height adjustment of the table is 0.25 kW. * Maximum permissible weight on the table: 140 kg. * Variable feed speed via frequency converter 0,4 to 4,5 m/min, Option 0,2 to 2,0 m/min or 0,6 bis 6,0 m/min. * Rubber conveyor belt, oil and temperature resistant. * Lateral guides to prevent the belt from lifting off. * Rubber pressure rollers in front and behind each station, oil and temperature resistant. * Automatic centring device for the conveyor belt * Automatic servo cooled motor * Speed motor on the main touch screen 1 TH R GROUP DEBURRING WITH ABRASIVE BELT * Rectified and balanced contact roller with 180 mm diameter. Coating of oil and heat resistant nitrile rubber. Standard roller hardness 55° shores. Mounted on an eccentric shaft that allows to control the working position and compensate the abrasive belt wear, with a range of 8 mm. This system is controlled by a pneumatic cylinder that allows the automatic insertion of the group into the work and, in case of emergency and/or machine stop, the immediate removal of the sanding belt from the working point. It is possible to insert sanding belts and/or Scotch Brite. * Pneumatic on-off switch. * Roller adjustment up-down "grain" stroke 10 mm Chjdpfx Abeynmw Roajd * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotation speed in feed direction 4 - 18 m/s. * Width and duration of the oscillation setting. * Pneumatic tensioning system for the abrasive belt. * Sanding belt centring system, with electronic photocell, Oscillation adjustment in width and time. 2ND GROUP ROTATING BRUSH UNIT * 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and a length of 530 mm. * Motorised raising and lowering of the group to regulate the pressure of the deburring. * Variable speed motor 1,5 kW. * Variable speed group electronic inverter 6 - 12 U/min. * Brush motor with variable speed, power 6 kW (4 x 1,5 kW). From 300 to 900 U/min. * Speed programmable control and display on the electronic touch screen. CONTROL OF THE THICKNESS AND THE BRUSHES * Motorised table lifting with fine adjustment via 4 precision screws with ball bearings * Maximum operating pressure 120 mm * Pressure motor power kW 0,75 * Pressure adjustment via touchscreen CONVEYOR BELT CLEANING Brush system in nylon canvas for cleaning the conveyor belt (length 1350, Ø =150 mm), located at the back of the machine under th...

Condition: new, Model Name B3 Entgrat-/Anfasmaschine Chodpsk Au Drjfx Abajd

Condition: new, Year of construction: 2025, pipe diameter (max.): 48 mm, power: 0.55 kW (0.75 HP), input voltage: 400 V, At Duralbend, we are manufacturing high-quality deburring machines designed to meet the needs of various industries. Deburring is a crucial process for removing sharp edges and imperfections from metal tubes, ensuring a clean, smooth finish. Our deburring machines, capable of handling tube diameters up to 48 mm and 60 mm, are perfect for industries like automotive, furniture, and construction. Chjdpfxovx D Ecs Abaod

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 13600 € 261.12 € 1300 mm 150 mm 150 mm 250x350 mm 945 mm 0.75 kW 1400 mm 1000 mm 1450 mm 300 kg Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum. The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm. The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° and enables a quick change of the grinding tool. Properties: * The grinding pressure is applied manually. * When deburring from above, the workpieces are pressed onto the high-grip lid. Csdpfxowiryhe Abashd * Fast processing, low costs The brush ensures the rounding of the edges of the workpiece. The standard brushes have a diameter of 150 mm. To deburr the product, use a support pad with a grinding disc. Depending on the height and hardness of the burr, you can set the grinding wheel at a slight angle to allow more pressure on the burr.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, working width: 550 mm, power: 32 kW (43.51 HP), empty load weight: 3,000 kg, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! Chedpfozk Dyyex Abaed TECHNICAL DETAILS Maximum working width: 550 mm MACHINE DETAILS Power: 32 kW Dimensions & Weight Dimensions (L x W x H): 1,700 x 2,700 x 2,900 mm Empty weight: 3,000 kg Control: Conventional Wet/Dry: Dry EQUIPMENT Station type 1: Belt sander CE marking

Condition: new, neu ca. 12 - 14 Wochen ab Auf Italien 74000 € 1398.6 € 1350 mm 0,5 - 170 mm 1370 x 2200 mm 4000 m³/h 200 mm 6 bar 78 (+/-2) dB 1750 mm 2100 mm 2180 mm 2000 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Bonnets for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Chodpfx Ajynmwksbaod Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 180 Hardness of the rubber wheels Shore 55 Stroke of the contact roller adjustment up-down "Grain adjustment mm 8 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Positioning speed of the contact roller adjustment m/s 10 Grinding belt speed m/s 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 10rotating clockwise and 10counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 20 Oscillation stroke mm 15 Rotation motor power kW 5,5 Revs 1/min 300 - 1000 Oscillation motor power kW 0,37 Grinding brush speed m/s 10,0 ACCESSORIES: B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5.580,00 with Wire Brush 0,3 mm € 5.900,00 R GROUP - GRINDING BELT Motor 15 kW € 1.060,00 OPTIONS: Return to Sender System (Grinding part is discharged to the front again) € 1.290,00 Conveyor belt with vacuum system - 3,0 kW - 300 mm wide € 4.780,00 2 additional PVC coated rollers on infeed and outfeed side € 2.040,00 Tampico Brush System for parts cleaning 0,55kW Ø 150 mm € 4.510,00 Tampico Brush system for conveyor belt cleaning Ø 150 mm € 4.030,00 magnetic conveying system - 2 groups, 200 x 200 mm € 13.520,00 Demagnetiser € 4.940,00 THE MACHINE MUST BE USED WITH AN EXTRACTION DEVICE. WE RECOMMEND AN EXTRACTION SYSTEM WITH 4,000 M³/H.

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 1,500 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 2,830 mm, total width: 2,100 mm, total height: 2,000 mm, workpiece weight (max.): 500 kg, overall weight: 2,700 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, table length: 2,000 mm, table width: 1,500 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 1,500 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 1,500 mm, height adjustment type: mechanical, input current: 61 A, pass-through width: 1,500 mm, Equipment: CE marking, type plate available, Polish Deburring Machine – Direct from Manufacturer We are proud to present our high-quality deburring machines, manufactured in Poland by Madora Sp. z o.o., a reputable and experienced company specializing in metal and woodworking machinery. With decades of expertise and a proven track record of innovation, Madora is recognized for delivering durable, efficient, and user-oriented solutions, specifically tailored to the requirements of industrial clients throughout Europe. Our machines are engineered for precision, performance, and long-term reliability—all offered at competitive market prices. The GP 1500 3Z is an outstanding, multi-purpose deburring machine designed for cleaning sheet metal after a variety of cutting processes. With three independent "Z"-type processing units, this machine stands out for its exceptional versatility and high processing capacity. What does this mean in practice? It allows up to three operations in a single cycle: not only does it efficiently remove scale and slag after plasma cutting, but it also enables simultaneous deburring and edge rounding of workpieces following laser cutting—all in one pass. Its wide machining range, with material thicknesses and working widths up to 1,500 mm, makes it suitable for both small and large workpieces. With the appropriate tooling, the machine is also capable of heavy-duty edge rounding and oxide layer removal. The GP 1500 3Z deburring machine features a TFT touch-screen control panel, enabling the operator to fully and continuously monitor and adjust machining parameters such as workpiece height, feed rate, and tool rotational speed. Codswzvkhepfx Abaehd Each processing unit can be operated independently, giving the user complete flexibility in selecting which operations to perform during a single pass.

Condition: new, diameter of brush Ø 250 mm width of brush 40.0 mm turning speed range 2850 U/min voltage 400 Volt total power requirement 1.3 / 1.8 kW Cedpjxaamnjfx Abashd weight of the machine ca. 36.0 kg dimensions of the machine ca. 415 x 467 x 356 mm Equipment: - Deburring of individual pieces and small series - Deburring of stretched round, rectangular and square tubes + flat material - Heavy, durable industrial design - with maintenance-free motor - long service life and very smooth running thanks to balanced rotor - with quality ball bearings - storage area for safety glasses - incl. 1x multi-purpose wire brush, wire thickness 0.35 mm - operating instructions

Condition: excellent (used), functionality: fully functional, Dual-station sandblasting cabinet. • The cabinet is designed for the comfortable operation of two operators simultaneously or for processing exceptionally long components that can be moved between workstations inside the chamber. It is equipped with two independent work chambers and separate abrasive tanks, which allows for the use of different abrasive materials. This solution ensures high efficiency in surface preparation, cleaning, rust removal, and finishing operations. Thanks to its very wide design, two front doors, and two side doors, the device allows for convenient loading of long, oversized, or irregularly shaped objects. Work area: 200 x 68 x 65 cm. • Foot control: Integrated control pedals are located under the device, allowing the abrasive stream to be started without using the hands. • Integrated extraction system: The device is equipped with two fans with filters (visible at the top of the housing), which are responsible for extracting dust generated during sandblasting, ensuring adequate visibility. Requires compressed air supply with a pressure of 6–8 bar (90–120 PSI). The device has two abrasive tanks with a capacity of 26 liters each (total 52 liters), which is an ideal solution for professional renovation and cleaning work. Product specifications: * Model: DSBC880 * Material: Steel construction Cedo Ahpu Ropfx Abajhd * Color: Grey * Overall dimensions: 206 (L) x 99 (W) x 174 (H) cm * Work area: 200 (L) x 68 (W) x 65 (H) cm * Abrasive tank capacity: 52 liters total (26 liters per tank) * Number of tanks: 2 independent tanks * Dust extraction system: Double dust extraction system * Door configuration: 2 front doors + 2 side doors * Built-in lighting * Sandblasting gloves: Included (material: natural rubber/vinyl) * Control valves: High-flow brass valves * Required air pressure: 6–8 bar (90–120 PSI) * Overall dimension: 207cm x 100cm x h-180 cm * Weight approximately 250 kg