Used Composting Machines for sale (64,501)

Condition: as good as new (ex-display), Year of construction: 2024, working width: 200 mm, 2024 Deburring and finishing machine F200 XLDS with magnetic support. Suitable for deburring, rounding, deslagging and/or grinding of steel cut parts up to 200 mm wide. Ijdpfxjhnc E Ae Afieih This is concerning a F200 XLDS 4-station machine. Type TS, with touch screen. Compared to the standard F200 XL, this machine is equipped with a deslagging roller for removing slag from plasma cut products. The F200 XL deburring machine is the finishing specialist for small workpieces. Suitable for flat ferrous/magentic sheet metal parts between 15 and 200 mm wide. Deburring, slag removal, grinding and edge rounding at high speed. This deburring machine has a deslagging roller ('deslagging hammer') as the first station. The second station is a grinding belt followed by two stationary disc brushes, one rotating clockwise (CW) and the other counterclockwise (CCW). Compared to other deburring machines, the F200 DS has a very high processing speed while being able to achieve more edge rounding. The machine comes standard with a freely adjustable speed for the conveyor belt and the grinding and/or brush head(s), making it possible to perform every conceivable operation and achieve every conceivable result. You determine the desired finish. Simple operation via the HMI touch screen on the front. The magnetic system ensures effective fixation of the products to be machined on the transport table, allowing even small workpieces (from 15 x 15 mm) to be machined safely, quickly and without problems. It is not for nothing that we at Q-Fin are convinced by a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput of this machine is 5 times higher than comparable machines. Take the test for yourself and make an appointment. We can now offer you this F200 DS - MAG showroom machine built year 2023 possibly in combination with a WES3000 wet working extractor and associated pipe work. Only available until sold. Machine comes with 1 year warranty excl. wear parts. Delivery ex works Bergeijk. If wanted we can also offer the machine including transport, installation and training of your operators on site. The machine is on display in our showroom in Germany. This is the very last F200 XLDS -MAG machine! Please contact us and we will send you an attractive offer.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 200 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 15 m/min, controller manufacturer: LNC-Control, workpiece length (max.): 3,200 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 200 mm, workpiece weight (max.): 1,500 kg, Equipment: rotational speed infinitely variable, BudgeCaft is a manufacturer of high-quality CNC machines. We design, develop, assemble, and sell CNC machines for businesses and industrial manufacturers. BEST DEAL Transport, installation, machine instruction, and CAD/CAM training are provided by Danmar Machines (languages: Dutch, English, French, Italian, or German). Additional charges may apply depending on the location. • Starter tool kit • ISO30 • ER32/ER40 collets • Vacuum pump • ATC spindle CC 9 kW • 1 year of online support/helpdesk for CAD/software (English) • 12-month standard factory warranty Suitable for machining: wood, panel material, acrylic, PVC, aluminum, foam, multiplex board, plasterboard, rock wool, plastics, etc. - 9 kW ATC spindle ISO30 ER32/ER40 - LNC MW control system - Leadshine servo motors - Tool change magazine - Vacuum table - Vacuum pump Iodpjwc Uadjfx Afisih - Powerful side channel blower, air pump - Pegasus CAD/CAM software Custom configurations available Working area dimensions:  1300 x 2600mm € 31,800  1600 x 3200mm € 37,500  2100 x 3200mm € 41,600 Linear tool magazine automatic changer: 10-12-16 position tool changers, automatic tool change during operation. Working area X-axis: 2600-3200 mm Working area Y-axis: 1300-1600-2100 mm Z-axis stroke: 200 mm Gantry construction: Yes Spindle motor: 9 kW servo motor (ATC spindle) Speed: 1,000-24,000 rpm Axis travel X-axis: 50 m/min Axis travel Y-axis: 50 m/min Axis travel Z-axis: 15 m/min Tool holder: ISO30-ER32-ER40 Software: Pegasus PWoodEntry Vacuum pump: included

Condition: good (used), Year of construction: 1999, Built in 1999 Iijdpfx Ajba Hz Uofijh 400 V; 50Hz 1.5 kW Linishing belt 100 x 1500 Belt speed 25m / sec. Weight approx. 50 kg

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 22207, Marinus Machines V&G 400 Series,Through Feed End Matching Machine,Serial Number 22207, Year of Manufacture 2000 In very good working condition. Maximum working length up to 6m, minimum working length: 500m/m Minimum working width: 50m/m, normal maximum width: 280m/m, 300m/m is possible with some adjustment of the tools. Total Power: Appr: 20kw, Feed Speed up to 20 pieces per minute,depending on length. Omron PLC Controls. Floor Size: W x D x H 2000 x 1650 x 1900m/m, Weight: Appr. 1750kg. Also with the machine is a 3m. Long Belt Conveyor, which could be used at the Infeed or Outfeed of the machine. Complete Safety Enclosure. Iodpfjv Er Niex Afioih With Operational & Electrical Manual. Location: Can be viewed in Burrowbridge,Somerset TA7 0SG Photos Available on your email or Mobile Phone WhatsApp.

Condition: used, Year of construction: 2010, The Maximum Machines UG PSV 600, manufactured in 2010, is a machine with a format of 600 mm. It is currently in stock and located in Germany. This pressing unit with a vertical stacker is PLC-controlled and features automatic shingle control, multiple counters, and a batch counter. It offers better information through the PLC display, easier setting, and enhanced efficiency with a stronger pressing unit. Additionally, it is equipped for 2-up operations. The delivery terms are FCA. Format: 600 mm Equipment: Iedpfx Afevfxx Deijih PSV 600 - Pressing unit with vertical stacker basics: plc-controlled - automatic shingle control - multiple counters better informations by plc-display - easier setting - more efficiency Stronger pressing unit - batch counter - 2-up-equipment

Condition: excellent (used), Dust extractor unit to run with preduster. Almost as new. Iedjumm Npspfx Afioih

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) Iiodjl Dw D Eepfx Afioh - Weight: 3560 kg

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Iijdpfx Aehg Rcxofijh Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: used, Year of construction: 2019, functionality: fully functional, Selling a Selmi Comfit 2019 Panning Machine, complete with the integrated spray system. This machine is in excellent working condition and has been very well maintained. Iedpjw Nx A Uofx Afieih Ideal for coating nuts, dried fruits, coffee beans, or inclusions in chocolate or sugar – it’s perfect for any artisan or small-scale chocolate manufacturer looking to scale up panning production with precision and efficiency. Key Features: Year: 2019 Includes the Selmi heated spray system for chocolate Precision-controlled air flow and temperature Polished stainless steel drum Suitable for small to medium batch production 220V single phase (UK compatible) Machine is located in Somerset, UK and available for immediate collection or shipping (buyer to arrange transport). We have two of these machines available.

Condition: like new (used), Year of construction: 2023, For sale: MHM SPiQ 20 45×55 screen printing carousel (SYNCHROPRINT iQ OVAL compact) with iDS (individual Drive System). Manufacturing date: January 2023. Manufacturer: MHM – Machines Highest Mechatronic GmbH (Austria) Model: SPiQ 20 45×55 Type: 1450IQ Year of manufacture: 01/2023 Power supply: 3×400 V, 50/60 Hz Connected load: 7.4 kVA Air requirement: approx. 690 l/min, 0.8 MPa (8 bar / 116 psi) Specification (per order): • Print area: 45×55 cm • Number of printing stations: 13 • Number of flash cure units: 4 Equipment: • 20× aluminium palette with neck cut-out: 52×80 cm • 13× squeegee blade 50 cm / 65 shore • 13× flood blade (low) 50 cm • 1× MHM Pro Iron – 40 cm Overall dimensions: 3.5 m × 11 m Ijdpfx Ajxb Avzsfieih

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 3 h, overall weight: 7,000 kg, empty load weight: 3,500 kg, maximum load weight: 3,500 kg, color: white, Equipment: documentation/manual, rubber tracks, The latest generation of towing service Iedpfow Hggqjx Afisih

Condition: good (used), Tray wash machine, direct from recently closed ‘meat-free’ factory. In lovely condition. Iodpfxsrfdq Uj Afijih

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 8,000 rpm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm Iedpfx Aow Ty S Sefieih - BT-40 - Automatic tool changer (24 positions) - Remote service (IXON) + network connection - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available

Year of construction: 1990, condition: ready for operation (used), Working width: 900mm, length: 2600mm, width: 2600mm, height: 2000mm, weight: 1.8t, operating hours: 5866h. Including wet suction. Documentation and maintenance reports available. On-site inspection is possible. Iiedsuzlg Djpfx Afish

Condition: ready for operation (used), Year of construction: 2019, Up for sale is a Selmi Demoulder (2019 model) in great working condition. This machine is designed to automate the demoulding of chocolate products, offering consistency, speed, and care in handling moulds. A perfect addition for chocolate manufacturers using polycarbonate moulds and looking to improve production flow and reduce manual handling. Iisdpfx Afjw Nx Drsieh Key Features: Year: 2019 Automatically demoulds finished chocolate products Gentle handling to prevent cracking or marking Compatible with standard polycarbonate moulds Compact footprint – ideal for artisan and mid-scale production Reliable and simple to use 220V single phase Can be linked to Selmi Spider Cooling Tunnel or alternatively I have the attachment to take moulds off a Selmi Horizontal Tunnel and bring the moulds to the demoulder - please ask for pictures of this additional attachment. Machine is currently located in Somerset, UK and available immediately. Collection or shipping can be arranged (transport at buyer’s cost).

Condition: new, Year of construction: 2019, Storage tanks, e.g. for bitumen for asphalt mixing plant(s), etc. (vertical design) 7 x 70 m³ 1 x 68 m³ with agitator New, unused, from project cancellation, thermal oil heated and electric heating possible, complete, immediately available, for sale (individually or as a complete package). Ijdpfxjw Nwtlo Afisih

Condition: used, axle configuration: 3 axles, wheelbase: 8,000 mm, first registration: 07/2020, color: white, Year of construction: 2020, General Information Odometer reading: 3,454 km Axle configuration Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg; Steered Rear axle 3: Max. axle load: 9,000 kg; Steered Dimensions Dimensions (L x W): 1,180 x 251 cm Weights Unladen weight: 13,970 kg Payload: 25,030 kg Gross vehicle weight: 39,000 kg Functional Pump: Yes High-pressure pump: Yes Water installation: Yes Iiodpfx Ajw I T Ddsfioh Financial Information Price: On request Further Information For more information, please contact John de Koning or Mark de Koning.

Condition: like new (used), functionality: fully functional, fuel type: diesel, color: blue, first registration: 03/2020, emission class: euro6, Year of construction: 2020, operating hours: 3,100 h, I sell a trailer for the production of cement screeds and polystyrene concrete by GB-Machines Mobileman D5 ZE. Year of production 3.2020. the condition of the machine very good. Everything in working order. Full automation of component weighing, automatic dispenser of chemicals and reinforcement. Equipped with high-pressure washer, water hoses, trestle. The capacity of the cement tank 8m3, sand / polystyrene tank 22m3. Full control of functions by remote control. Hatz 4H50TIC 4-cylinder engine Estrichauflieger Mobileman D5 ZE 30 m³ Mulde, Sand - Styroporkammer 22 m³ und Zement-Kammer 8 m³, EZ 03/2020, 3-Achs Auflieger, Luftfederung, BPW-Achsen, 1.Achse liftbar, 3.Achse lenkbar, Bereifung 385/65/22,5 auf Alufelgen: 1.Achse ca. 12 mm, 2.Achse ca. 12 mm, 3.Achse ca. 14 mm, Iiodpjtn Nl Usfx Afish Fahrgestell der Fa. Kempf SKM/3/S/39A13, kippbar, techn. zul. GG 39.000 kg, zul. GG 36.000 kg.

Condition: excellent (used), Year of construction: 2017, 1 X Audion CS-Matic 100 shrink wrapper. The Audion CS-Matic 100 offers flexibility for diverse product sizes. Its continuous side-seal system  accommodates a wide range of heights and widths, alongside unlimited product lengths. Smart integrated sensors automatically determine the perfect bag size, while the adjustable, PTFE-coated seal bar ensures high-speed packaging, achieving up to 4200 pristine packs per hour. Technical specification: ⚙️ Manufacturer - Audion Packaging Machines ⚙️ Model - CS-Matic 100 Iiedpfx Aew Euzmjfijh ⚙️ Serial number - 63825 ⚙️ Year of manufacture - 2017 ⚙️ Power - AC Input 380-415V | 50-60 Hz | 2330 W | 10A Benefits: ✅ Very fast cycle - Up to 4200 packs per hour. ✅ Flexibility - Possibility of packing single packs or multipacks at any length. ✅Easy operation with touchscreen control systemm - Sealtime, seal temperature and belt speed can easily be adjusted. ✅ Automated sealing - Continuous cycle sealing. ✅ Motorized systems - Sealing bar and conveyors are controlled by an inverter and encoder. ✅ Wide film choice - The CS Matic 100 can handle polyolefin, polyethylene and pvc centrefolded film. ✅ User-friendly touchscreen - Easy navigation through the menu structure and safe control of all packaging parameters. ✅ Built-in safety features - An emergency stop button is standard equipped.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 53,000 h, functionality: fully functional, machine/vehicle number: 234, film width: 900 mm, pressure: 7 bar, total width: 4,750 mm, total length: 13,600 mm, total height: 2,550 mm, clamping force: 300 kN, overall weight: 14,500 kg, Stations: Unwinding device, forming station, punching station, cutting punch, stacking, rewinding station Max. tool size: 780 x 570 mm Iijdpfew Av H Esx Afieh Draw depth: 127 / 127 mm Max. film thickness: 1.8 mm Film width: 250 - 810 mm Max. closing force: 30,000 daN Max. cycles: 45 / minute

Year of construction: 2004, condition: ready for operation (used), Selling a very rare to find Knobel Vibrating Conveyor in Stainless Steel. This machine has been tested and is in full working order. The conveyor vibrates in addition to having the pushers too. The pushers were never used since new. Iiedpfx Afew Nxtmjieh I also have a Knobel Stainless Steel CCM-9 which needs a rebuild. Contact me for more information.

Condition: new, Unused bin washer. Bought for a contract which never materialised. Iiodpfetpv T Nox Afioh

Condition: good (used), 1 x TBM Tecnopast 350kg lifting twin-arm pastry mixer & 3 bowls. Fitted with Jacking castors This machine has had a complete control panel internal rebuild with modern components in 2015. Technical specification: Manufacturer - TBM Tecnopast Bakery Machines S.P.A. Iisdew Adukjpfx Afijh Model - T500 ETT. Capacity - 350 kg (dough) & 225 kg (flour).  Installed power - 11.6 kW.

Condition: as good as new (ex-display), Brand new, unused. Double door twin dolav washer, will also wash tote bins. Still in its protective wrapping. Rare opportunity! Iisdsvvw Niepfx Afieh

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Isdpfx Aeu Ixt Dsfisih