Used Ddr Smalcalda Drilling Machine for sale (92,076)

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 28 mm Ijdpfx Asxh Swnsfietn throat 200 mm bore stroke 105 mm table surface area 360x340 mm Distance spindle/table max. 540 mm turning speed range - stepless 120-3000 U/min

Condition: ready for operation (used), Universal Milling Head SECMU Maximum speed 2000rpm Itsdpfxjxhrffj Afion ISO 50 Never Used

Condition: excellent (used), Pillar Drill Brand Ixion Type BS 30 MK 4 Spindle Mount Table Size 550 x 405 mm Infinitely Variable Speeds from 16 - 2800 rpm Thrust 280 mm T-Slot Width 16 mm Vise 150 mm BB Drill Chuck 3-16 mm 380 Volt Depth 1000 mm Width 720 mm Height 1950 mm, with pallet 2060 mm Itsdpfjv S Akqex Afien

Condition: used, Display unit Iodpfx Afsv Ntb Usijtn Condition: Like new Included in delivery: Equipment case Device Operating instructions Bit This item is an unused display unit.

Year of construction: 1987, condition: good (used), max. drilling and milling diameter 20 mm maximum drilling depth 180 mm the largest drilling length 180 mm table surface dimensions (length / width) 280/600 mm the greatest distance from the table surface to the spindle axis 130 mm spindle speed 2800 rpm. engine power 2.2 kW air demand for sawdust extraction suction 300-350 m3 / h air speed in the extraction system 19-22 m / s squeegee tip connection diameter 80 mm Ijdpfoiduhzox Afiotn dimensions (length / width / height) 1240/800/1350 mm weight 350 kg

Condition: used, Vertical drilling machine with 2 adjustable spindles. Maximum drilling width 440 mm Itjdpfxeu E Iq To Afien Minimum drilling width 250 mm Maximum depth 250 mm Engine power hp. 2

Condition: excellent (used), Surface of the base plate 880 x 700 mm Distance from spindle center to stand min./max. 220 / 620 mm Drill spindle: 13 mm passage Iodpfx Afouigzpsietn Inner cone MK 3 Stroke 150 mm Spindle speeds 25 - 2560 rpm. Spindle feeds 0.06 - 0.12 - 0.25 mm/rev Motor power (1500/3000 rpm) 1.2 / 1.5 HP

Condition: excellent (used), Year of construction: 2018, Radial Drilling Machine KNUTH R 40 V Year of manufacture: 2018 Very little used Clamping cube Digital depth display Technical Data: WORKING AREA Drilling capacity: 40 mm Tapping capacity, cast iron: M 40 Tapping capacity, steel: M 32 Max. drilling depth: 260 mm Machine table dimensions: 2050 mm x 920 mm x 180 mm Cube table dimensions: 620 mm x 450 mm x 450 mm Itedpexdw Ukefx Afion Arm reach: 300 mm - 1300 mm Distance spindle nose to table surface: 300 mm - 1200 mm Vertical arm travel: 640 mm Column diameter: 280 mm TRAVEL Horizontal travel of drilling head: 1000 mm MAIN SPINDLE Speed range: 54 rpm - 2150 rpm Spindle taper: 4 MT FEED Feeds: 0.1 mm/rev - 0.63 mm/rev DRIVE POWER Main drive motor power: 2.2 kW Lifting motor: 1.1 kW DIMENSIONS AND WEIGHT Dimensions (L x W x H): 2.07 m x 0.85 m x 2.43 m Weight: 2300 kg

Condition: good (used), 3 drilling heads; adjustable drilling head width; power: 3 x 2.2 kW; Itjdpfexg Ur Esx Afijn

Condition: used, Display unit Condition: Like new Included in delivery: Equipment case Device Operating instructions Bit This item is an unused display unit. Itodpfxsv Ntb Is Afion

Condition: new, - MK4 - 95/1600 to - Jog function Ijdpfx Afeqyyqboistn - Digital display on three axes - Drilling section is height-adjustable - Drilling section can be tilted - Table 720 ×210 mm - Gear driven - Protective cap - Emergency stop - Relief - documentation - 400V

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 5976/07, total length: 2,500 mm, total width: 1,850 mm, total height: 1,750 mm, input voltage: 380 V, working height: 1,000 mm, overall weight: 420 kg, pressure: 6 bar, drill diameter: 130 mm, input frequency: 50 Hz, power: 2.5 kW (3.40 HP), Equipment: documentation/manual, RBB Trapano double side driller Itedpfsxg Ngqjx Afion

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, This 2A576 radial drilling machine has been completely overhauled and restored to full producbon capacity. Basic technical data: Drilling diameter: in steel 80 mm / in cast iron 100 mm Headstock travel along the arm: 2000 mm Itsdpfx Asur H I Njfion Max drilling radius: 2500 mm Spindle travel: 500 mm Spindle: ISO50 Stepless sefng of spindle feed rates Spindle speed range: 2-1600 rpm. Column diameter: 500 mm Main drive engine power: 7.5 kW Dimensions L/W/H: 4180/1280/4125 mm Weight: 12 tons This drilling machine meets the minimum safety and health requirements set out in Direcbve 2009/104/EC, known as the "Tools Directive". Machine ready for checking under power in our warehouse in central Poland.

Condition: new, bore capacity in steel (diameter) 40 mm throat 330 mm bore stroke 190 mm spindle taper MT 4 MK table: 500 x 400 mm column diameter 140 mm turning speeds 90 - 1500 U/min total power requirement 2,2 kW weight of the machine ca. 435 kg. range L-W-H 570 x 930 x 2170 mm Isdpsqwd A Aofx Afistn

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm Iedpfsfg U Tpjx Afijtn total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel (diameter) 60 mm Iedpofg U Tujfx Afiotn bore capacity in cast iron (diameter) 70 mm threading cutting capacity: M50 throat 420 mm bore stroke 260 mm spindle taper MK 5 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 64 - 1210 U/min transmission ratio 12 Stufen column diameter 220 mm table surface area 600 x 600 mm total power requirement 4 kW weight of the machine ca. 0,82 t dimensions of the machine ca. 0,7 x 1,2 x 2,7 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel (diameter) 16 mm throat 150 mm bore stroke 90 mm turning speeds 340 - 2200 U/min 243 x 243 mm total power requirement 0,5 kW / Volt weight of the machine ca. 42 Kg dimensions 400 x 450 x 900 mm Table drill - Digital speed display - Spindle protection Iedpfx Aevdld Rsfietn - vice - drill replacement - Quick span feed (1 to 16 mm) - Tilt and rotating rider work table. - deep stop - tool set - documentation

Condition: new, bore capacity in steel (diameter) 40 mm throat 370 mm bore stroke 200 mm spindle taper MT 4 MK table: 580 x 460 mm column diameter 160 mm turning speeds 75 - 2020 U/min feeds 0,1 - 0,2 - 0,3 - 0,4 mm/U total power requirement 1,5 kW weight of the machine ca. 700 kg. range L-W-H 1,1 x 0,6 x 2,35 mm • machine base for clamping high workpieces • Digital Depth Gauge Isdpfx Aof Nb E Rjfistn • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment

Condition: new, bore capacity in steel (diameter) 32 mm throat 320 mm bore stroke 160 mm spindle taper MT 4 MK table: 500 x 420 mm column diameter 120 mm turning speeds 85 - 1800 U/min feeds 0,1 - 0,2 - 0,3 mm/U total power requirement 0,85 / 1,5 kW weight of the machine ca. 500 kg. Itodefv H H Hopfx Afisn range L-W-H 965 x 515 x 1920 mm

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 feed range - spindle 0 mm/U spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Itsdpsfg U Tnjfx Afisn Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel 40 mm threading cutting capacity: M30 throat 310 mm bore stroke 175 mm spindle taper MK 4 feed range - spindle 20 - 400 mm/U spindle turning speed range 60 - 1250 / 120 -2500 U/min transmission ratio 2 Stufen column diameter 120 mm table surface area 550 x 400 mm total power requirement 1,5 / 3,0 kW weight of the machine ca. 0,45 t dimensions of the machine ca. 0,7 x 1,4 x 2,0 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch Ijdpfx Aefg U Tqjfijtn - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel (diameter) 25 mm throat 240 mm bore stroke 110 mm Ijdofhk Ubjpfx Afistn turning speeds 125 - 2850 U/min 310 x 320 mm distance drilling head - clamping area max. 650 mm total power requirement 0,75 / 400 kW / Volt weight of the machine ca. 0,175 t dimensions 0,95x0,8x1,75 inkl. Tisch m

Condition: new, bore capacity in steel (diameter) 40 mm throat 300 mm bore stroke 120 mm spindle taper MT 4 MK table: 500 x 460 mm column diameter 115 mm turning speeds 75- 3200 U/min feeds 0,1 - 0,18 - 0,26 mm/U total power requirement 1,5 kW weight of the machine ca. 350 kg range L-W-H 2,2 x 0,8 x 0,7 mm Column drilling machine with: Thread cutting function. Digital depth display Coolant system 2 stage motor Spindle protection Swivel table Itedpfx Asvn U Awjfisn Pivoting drill head LED lighting Packaging dimensions: 730x760x188mm Weight 340kg

Condition: used, Year of construction: 2000, bore capacity in steel (diameter) 50 mm throat 365 mm bore stroke 230 mm spindle diameter 60 mm spindle taper MK 4 spindle turning speed range 54 - 1032 U/min no. of turning speeds 9 Stufen table surface area 620 x 520 mm total power requirement 3,5 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,2 x 0,8 x 2,45 m Pillar drill with - Left/right rotation - Machine light - Coolant - Emergency stop device Itodev Ehd Njpfx Afion

Condition: used, bore capacity in steel (diameter) 40 mm throat 325 mm Itedpfx Afjwn T A Usion bore stroke 170 mm table surface area 730 x 590 mm