Used Ddr Smalcalda Drilling Machine for sale (65,094)

Condition: used, Year of construction: 2004, bore capacity in steel (diameter) 50 mm arm length 1.600 mm workpiece height max. 1.200 mm distance spindle/base plate 320 - 1.220 mm spindle taper MT 5 Hjdjzcqyfspfx Aahop quill stroke 315 mm throat min. 350 mm throat max. 1.600 mm quill feed 0,04 - 3,20 mm/U drive capacity - spindle motor 4,0 kW spindle turning speed range 25 - 2.000 U/min column diameter 350 mm voltage 400 V total power requirement 6,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,45 x 1,00 x 2,65 m - Serial-No.: 4045935 - Clamping cube 630 x 500 x 500 mm - Coolant pump

Condition: used, Year of construction: 2018, functionality: fully functional, - Year of manufacture: 2018 - Fully operational - Made in Poland - Operating manual, CE certificate included Hsdpfx Aaew Iqdzjhop TECHNICAL SPECIFICATIONS: - Four drilling units - Suitable for drilling both long and short components - First drilling unit: five drills - Second drilling unit: five drills - Third drilling unit: five drills - Fourth drilling unit: six drills - Adjustable drilling units, right and left - Three horizontal pneumatic clamps - Three vertical pneumatic clamps - One centering pneumatic clamp - Motor rotation (right): 3000 rpm - Motor power: 5 kW - Spindle stroke: approx. 160 mm - Table height – working level: approx. 1000–1080 mm - Rated voltage: 3x400 V - Air pressure: 6 bar - Air consumption: 10 Nm3/h / 2m3/h Dimensions: - Length: 2300 mm - Width: 1700 mm - Height: 1500 mm - Weight: 750 kg

Condition: good (used), Year of construction: 1990, power: 3 kW (4.08 HP), rotational speed (max.): 1,280 rpm, total width: 2,000 mm, total length: 2,000 mm, total height: 2,300 mm, table width: 400 mm, table length: 1,200 mm, Drilling machine Erlo - TCA 45 BV MACH-ID 9361 Make: Erlo Type: TCA 45 BV Year: 1990 Max. drill Ø steel:45mm Max. drill Ø cast: 50mm Max. tap Ø: 40M Stroke pinole: 280mm Throat: 470mm Spindle Taper: 5ISO/Bt/Mk Speeds / ranges: 1280Rpm Table Length: 1200mm Table Width: 400mm Power: 3kW Length: 2000mm Hjdpfszcnnaox Aahjp Width: 2000mm Height: 2300mm Weight: 2800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, machine/vehicle number: 008606, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 5 No of Top Units: 2 Hjdpfx Aajzcmpcohep Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 008607, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 6 No of Top Units: 4 Hodpszcmn Esfx Aahep Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 008527, X axis working area: 6000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Hedpjy Nx Ufofx Aahop Maximum edge height: 65 mm Total number of drilling spindles: 21 Total number of tool changer positions: 77

Condition: used, bore capacity in steel (diameter) 28 mm throat 200 mm bore stroke 105 mm spindle taper MK 3 number of spindle speeds 12 spindle speed: 35 - 5600 Upm column diameter 92 mm table-size 340 x 360 mm Hedsfbh Akjpfx Aahsp table rotating 360 ° total power requirement 1,5 kW weight of the machine ca. ca. 170 kg dimensions of the machine ca. ca. 750 x 500 x 1800 mm

Condition: used, bore capacity in steel (diameter) 40 mm throat 345 mm bore stroke 180 mm spindle turning speed range 25-640 U/min column diameter 180 mm table-size Ø ca. 560 mm surface area Ø 445 mm feeds 0,1; 0,2; 0,3 mm/U spindle taper MT 4 Hsdpfox Iwgqex Aahop weight of the machine ca. 1 t dimensions ca. 650 x 1000 x 2100 mm with thread cutting device foot switch With coolant device in the base steplessly variable speeds, 2 gear stages, and 2 motor speeds

Condition: used, bore capacity in steel (diameter) 40 mm continious capacity 25 mm throat 315 mm Hsdpsx Iwgkefx Aahop bore stroke 200 mm bore depth 280 mm spindle taper MT 4 feed range 0,1-1,5 U/min column diameter ca. 230 mm number of feeds 9 table-size 700 x 600 mm surface area 450 x 560 mm distance spindle/base plate 1100 mm dimensions ca. 1000 x 700 x 2400 mm total power requirement 2,6 kW weight of the machine ca. 1,1 t emergency stop switch renewed

Condition: used, Year of construction: 2001, drilling diameter 18 min drilling capacity diameter max. 15 mm bore depth 90 mm throat 215 mm spindle bis 360 mm spindle 560 mm table plate 350 x 290 mm column diameter 75 mm Total height max. 1050 mm Hedpfoxbtrajx Aahep weight ca. 100 kg spindle turning speed - stepless 100 - 1800 U/min motor speeds: 700 / 1400 U/min Pole-changing motor

Condition: used, bore capacity in steel (diameter) 23 / 28 mm throat 260 mm bore stroke 120 mm tool taper MK 3 table-size 500 x 350 mm column diameter 100 mm total power requirement 1,3 kW weight of the machine ca. 400 kg dimensions of the machine ca. 800 x 600 x 1750 mm Machine info - right-left rotation Hodpfxed Nxvro Aahep - stepless speed adjustment - automatic feed 0,1/ 0,16 / 0,25

Condition: used, Year of construction: 1978, number of spindles 3 bore capacity in steel (diameter) 40 mm Hedsd Ih S Sjpfx Aahep bore stroke 180 mm weight of the machine ca. 2,3 t

Condition: used, bore capacity in steel (diameter) 23 mm throat 300 mm bore stroke 150 mm table-size 300 x 410 mm spindle taper MK 2 total power requirement 1,4 kW weight of the machine ca. ca. 315 kg dimensions of the machine ca. ca. 700 x 900 x 1900 mm Hodjfbh Alepfx Aahep Machine has fallen over. A sheet metal cover and 2 levers of the cross lever broke off. Concentricity has been tested and is OK. Functional video available. Machine can be viewed and tested on site.

Condition: used, Year of construction: 2014, throat 180 mm quill stroke 80 mm continious capacity 20 spindle taper MK 2 table-size 280 x 245 mm height of the machine ca. 1000 m Hedpfx Aaoxbtrgohjp column diameter 73 mm distance spindle /table max. 425 mm dimensions ca. 615 x 330 x 1015 mm weight ca. 60 kg incl. vice HM Müller HT100P

Condition: used, bore capacity in steel (diameter) 23 mm spindle taper MK 2 spindle stroke 130 mm arm length ca. 860 mm table-size 1280 x 500 mm Hedpfewugrcsx Aahep surface area ca. 1250 x 480 mm turning speed range 115 - 2400 U/min workpiece height max. ca. 535 mm boring chuck Schnellspannfutter 1-13 weight of the machine ca. 690 kg total power requirement 1 kW range L-W-H ca. 1300 x 1800 x 2100 mm Distance spindle center - stand center (projection): approx. 860 mm Distance table quill (workpiece height): max. 535 mm Adjustability of the horizontal/vertical arm: approx. 300 - 400 mm

Year of construction: 1973, condition: used, bore capacity in steel (diameter) 32 mm arm length 410 - 1000 mm workpiece height max. 765 mm coolant ja boring spindle diameter 38 mm diameter of quill 70 mm spindle stroke 225 mm boring spindle MK 4 mm/min spindle turning speed - stepless 70 - 2000 U/min feed range - spindle 0,04 - 0,32 mm/U column diameter 225 mm bore radius max./min max. 1130 mm table surface area 630 x 1320 mm height adjustment 500 mm base plate 1500 x 1000 mm T-slots 4 Stück T-slot - distance 18 mm total power requirement 2,2 kW weight of the machine ca. 1,8 t Hsdpfxsgmu A Sj Aahsp dimensions of the machine ca. m shift of supports: 590 mm without turntable and tools

Condition: used, drill diameter 1,5 - 25 mm lip angle 40 - 180 ° 6-jaw-chucks various equipment manual included Encapsulated drive motor: closed version, air-cooled, rotary and AC drills with cylindrical or conical shank left and right-hand drills 6 Jaw chuck Hodpod Ih Sgofx Aahsp Device for compressed air cooling various equipment (see pictures)

Condition: new, SERRMAC TCS and TC Drilling and Milling Machine (Cross Table) New, “CE” certified 3-year warranty Automatic feed Hedpfx Aajfh Si Uohsp High-efficiency transmission and electronic variable speed drive via vector inverter. Coolant system for cutting tools Threading via inverter, complete with digital tachometer Threaded spindle axis for CM4 tool clamping Cross table: 800 x 255 mm Drilling capacity in R50 steel: ø 50 mm Tapping capacity in R50 steel: M 26 Spindle taper: CM4 Spindle stroke: 145 mm Spindle shank diameter: 72 mm Automatic feed: 3 speeds: 0.05 – 0.1 – 0.2 rpm Automatic feed with electromagnetic clutch: 3 speeds: 0.05 – 0.1 – 0.2 mm/rev Prismatic column Cross table Inverter drive Spindle speed: 45 – 2150 rpm Motor power (380 V – 50 Hz): 3 kW “T” slot dimensions: 14 x 14 mm Cross table: longitudinal travel, manual axis X: 585 mm Cross table: transverse travel, manual axis Y: 240 mm Dimensions (h x w x d) with column: 1,986 x 1,340 x 1,280 mm Weight: 780 kg

Condition: used, 4 Kopf Bohrmaschine / 4 head Paper Drilling machine Nagel Citoborma 480 AB Hedpfx Ajzcfwfoahsp Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2003, operating hours: 3,800 h, functionality: fully functional, Good morning, I am selling a complete set ready for drilling operations: Hedpfozd Ribjx Aahjp - Vermeer D7x11a horizontal drill, 2003, ~3800 operating hours. It underwent a major overhaul a few years ago, has almost a full magazine of Hunting drill rods, and is in very good technical and visual condition. - Vermeer mixing unit with a 120 l/min bentonite pump, 2003. Tank capacity: 1200 l. - Iveco Eurocargo 100E18 E5 truck, 2012, ~290,000 km. Equipped with an additional tank (1100 l), shelving, a water transfer pump, a water filling system, a Cintropur filter, tool holders, and a custom-made external aluminum toolbox. Aluminum ramps are also included. The vehicle has undergone a full service at an authorized Iveco workshop. Oils, filters, front and rear brakes, new headlights and windshield, and new batteries have all been replaced. The vehicle is in excellent condition. - An additional D7x11a drill for parts - the machine is practically complete, missing only a few elements and parts. The engine is in working order. I will include a starting drill rod, a drilling head, a locking sleeve, and 3 reamers (90-230 mm) with the drill. The set is currently used only occasionally, but it is ready for operation at any time.

Condition: excellent (used), Machine number: 7455 Type / Model: BT 2 Drilling capacity: up to 16 mm Spindle mount: Drill chuck Speed range: 355 / 710 / 1,400 / 2,800 rpm Stroke: 100 mm Overhang: 210 mm Table: 340 x 470 mm Head adjustment: 120 mm Total power consumption: 1.1 kW Accessories / Equipment: Drill chuck Condition: very good Weight: 165 kg Hedpfx Aslk Dkueahep Dimensions: 480 x 550 x 1,150 mm

Condition: refurbished (used), Repair of the tachometer circuit board for various models. Please contact us if the gear stages are no longer functioning correctly as intended. Hodpfjy Rfzusx Aahop

Condition: not inspected (used), Year of construction: 1996, bore capacity in steel (diameter) 32 mm morse taper MK 4 base plate 1700 x 700 mm feed 4 m/min weight of the machine ca. 1,5 t Hsdpfx Aaozb Raijhop dimensions of the machine ca. 1800 x x1200 x 2480 m

Condition: like new (used), Year of construction: 2012, AGIECHARMILLES drilling EDM machine, model DRILL 20, manufactured in 2012. Travel: X 300, Y 200, Z 300. Maximum drilling depth: 200 mm. Table: 400 x 300 mm. CNC unit with 12" TFT touchscreen. Sequences drilling points until the electrode is used up. Maximum workpiece weight: 300 kg. 30A generator. Hjdpezd D Rrofx Aahsp Electrode diameter: 0.1 - 3.0 mm. Dielectric pump pressure: 70 bars. Dielectric tank capacity: 16 liters.

Condition: as good as new (ex-display), functionality: not functional, Vertical drilling machine with feed gripper system for material positioning. WITHOUT control system and therefore not operational. Control cabinet is available but partially incomplete. Operating manual and circuit diagrams are available. WORKING RANGE Round material: 20 mm – 150 mm Square material: 20 mm – 140 mm Flat material (width): 20 mm – 240 mm Flat material (height): 5 mm – 140 mm DRILLING UNIT Vertical from above Min. drilling diameter: 6 mm Max. drilling diameter: 25 mm Tools: HSS drills only Spindle speeds: 380 rpm – 1,600 rpm Rapid traverse/return: max. 11,000 mm/min Drilling feed: 10 – 1,500 mm/min Drill slide positioning: max. 17,000 mm/min DRIVE POWER Frequency controlled (87 Hz characteristic curve): 2.6 kW MANUAL TOOL CHANGE Quick-change tool holder: MK3 WORKPIECE CLAMPING Horizontal: max. 5.6 kN Hedpfx Aajy At Iyjhop FEED GRIPPER Stroke length: 670 mm Feed speed: 6 – 60 m/min Return speed: 60 m/min AIR CONSUMPTION Approx. 300 l/min MACHINE DIMENSIONS (L x W x H): approx. 1,610 x 1,120 x 2,400 mm WORKING HEIGHT above floor: 1,040 mm WEIGHT Machine without accessories: approx. 1,600 kg COMPRESSED AIR CONNECTION Customer side (for air cooling system): 6 – 8 bar