Used Daewoo Generator for sale (62)

Condition: used, DAEWOO PUMA 300 LB (Doosan) Psdpfxeqfm A Ao Ah Hogg 2-axis CNC lathe CNC Fanuc 18T Hydraulic tailstock Condition: very good. This machine can be inspected in our warehouse, under power. Mimu machine tools Italy

Year of construction: 2001, condition: good (used), Parts shown by hand not come. Pedpfolyrbzsx Ah Hjgg Technical book with characteristics of machine is in attachment.

Condition: new, Power 7,5 KW Receiver 500 L feed pressure 14 bar liter capacity 995 l connected load frequency 400 V weight of the machine ca. 200 kg dimensions of the machine ca. 2,0 x 0,7 x ,125 m Psdpfx Aheu Imfzo Hogg

Condition: new, rated capacity 8,1 kVA voltage 400 / 230 V frequency 50 Hz tank capacity 15 l engine output 11 / 15 KW / PS weight of the machine ca. 0,165 t dimensions of the machine ca. 0,88 x 0,56 x 0,76 m Diesel generator with: - equipped with electric start. - Equipped with automatic voltage regulator. - Air cooled Pgsdeu Imgfspfx Ah Hog - Mobile. - Direct injection - Low oil level alarm with auto-stop function.

Condition: good (used), Year of construction: 2000, Machine come without tool holders and any additional equipement. Parts shown by hand not come. Technical details are shown on picture. Psdpfxjw Tc S Uj Ah Hjgg

Condition: used, functionality: limited functionality, Year of construction: 2005, operating hours: 3,080 h, load capacity: 4,500 kg, lifting height: 6,050 mm, free lift: 1,800 mm, fuel type: gas, mast type: triplex, construction height: 2,780 mm, fork length: 1,200 mm, empty load weight: 7,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,700 mm, LPG forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Pedpevcf Rnsfx Ah Hogg Technical condition: poor Front tires type: Superelastic Front tires condition: 0 - 20% Rear tires type: Superelastic Rear tires condition: 0 - 20% Description: Engine defective Sideshift, 3rd valve, front work light, full free lift, dual tires,

Condition: used, CNC lathe Daewoo Lynx 200 B CNC Fanuc 21t 10 tool turret tailstock Psdpfxjt Ip Uks Ah Hsgg bar feeder The machine can be seen under power in our warehouse (M i m u)

Condition: good (used), Year of construction: 1998, Parts shown by hand not come. Technical data are shown on picture. Pgsdpfx Ahewb Aqno Hog

Condition: used, Year of construction: 2001, CNC FANUC 18i M X AXIS STROKE 2000 MM Y AXIS STROKE 850 MM Z AXIS STROKE 830 MM SPINDLE SPEED 6000 RPM SPINDLE TAPER ISO 50 DIN 69871 TABLE 2000 X 800 MM WORKPIECE LOAD 3000 KG RAPID FEED I X - Y - Z 12 MT/MIN COOLANT INTERNAL 5 BAR EXTERNAL HIGH PRESSURE 20 BAR Pedpfokx E Tbsx Ah Hogg ATC 40 PLACE 4 CNC AXIS ROTARY TABLE WITH TAILSTOCK CHIP CONVEYOR

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,250 mm, area performance: 6,380 m²/h, overall weight: 396 kg, input voltage: 220 V, total height: 1,300 mm, total width: 1,250 mm, total length: 1,600 mm, water tank capacity: 40 l, battery voltage: 48 V, battery capacity: 65 Ah, Daewoo DS 80 Bj. 2025, new machine Pjdpfx Ahewhixlo Hjgg

Condition: used, - “DAEWOO” ACE V50P vertical machining center – Pallet changer – 30 stations for tools on chain – availability of over 40 tools/tool ​​holders, some of which are reamers with micrometric adjustment and 3 tool holders with tank for lubricant/coolant liquid - CNC Fanuc - machine still installed in the workshop, operational until 2021 - availability for any test - use and maintenance book - Price and detailed technical characteristics on request - Pgodonr R A Ijpfx Ah Heg

Year of construction: 2022, condition: new, rated capacity max. 8,1 kVA capacity in kVA bei 400 V - 7,5 kVA rated capacity bei 230 V - 6,1 kVA power fuel Diesel 0 tank capacity 15 l Pgodpfxjt Smito Ah Heg 0 11 KW cubic capacity 498 ccm weight of the machine ca. 0,165 t dimensions of the machine ca. 0,8 x 0,65 x 0,75 m Diesel fuel emergency generator, Power 8.1 KVA, Socket connections: 1 x 400V - 16A, 1 x 230V - 32A, 1 x 230V - 16A, with electric starter, with battery: 32 AH, noise level: 72-74 dBA (7M), automatic voltage regulation (AVR), overload protection, diesel fuel consumption: 1,25 ltr/h at 50% load,

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. • Daewoo MYNX 540, Baujahr 2001 • die Spindel wurde im Frühling 2025 revidiert, neue Lager!! • die 4.Achse gehört mit dazu • ACHTUNG, das liegende 3-Backenfutter NICHT Arbeitsbereich X-Achse mm 1020 Y-Achse mm 510 Z-Achse mm 625 Aufspanntisch Tischgrösse mm 1200 x 500 4 T-Nuten mm 18H8 T-Nuten Abstand mm 125 Abstand Tisch-Spindelnase mm 150 - 775 Abstand Spindelmitte-Ständer mm 520 Tischbelastung kg 800 Spindelstock Antriebsleistung kW 11/15 Drehzahlbereich, stufenlos U/min 80 - 8000 Bereich konstanter Leistung U/min 750 - 8000 Drehmoment, max. Nm 190 Spindelkonus DIN 69871A ISO 40, SK40 Anzugsbolzen DIN 69872 STANDARDZUBEHOER Pjdoyfg Taepfx Ah Hsgg • - FANUC CNC-Bahnsteuerung Modell 21 i-MA mit 9,5" LCD Monochrom Bildschirm, • Teileprogrammspeicher 32 kB/80 m • - RIGID TAPPING - Gewindebohren ohne Ausgleichsfutter • - 24-fach Tellermagazin • - Werkzeugaufnahme im Spindelkonus ISO 40, DIN 69871A/DIN 69872, SK40 • - FANUC AC-Hauptantrieb mit 11/15 kW Motor • - Drehzahlbereich 80-8000 U/min, stufenlos • - Kühlmittelversorgung aus dem 300 Litertank, Pumpe 1,5 bar SONDERZUBEHOER • - Spindelölkühler • - Kühlmittelzufuhr durch die Spindel (Form A) DIN 69871 • mit 10 bar Pumpe und Patronenfilter • - Kühlmittelpumpe 6 bar • - Vorbereitung für 4. Achse • - KITAGAWA CNC-Rundtisch Typ RS 250 RAHO • mit Motor Fanuc und 4. Achse in Maschine

Condition: used, Year of construction: 2007, operating hours: 7,790 h, Location: Madrid (Madrid) Pgsdpjydl R Iofx Ah Heg

Condition: new, connected load frequency 230 V battery 24V / 100Ah Brush diameter 510 mm turning speeds 175 U/min 0 Luft 24 L / s tank capacity 50 / 50 Liter weight 160 kg range L-W-H 1,1 x 0,52 x 1,0 mm Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Pedpfx Asidabksh Hegg Fresh/waste water tank volume: 50/ 50 L

Condition: used, functionality: fully functional, machine/vehicle number: C9-00710, Year of construction: 2001, load capacity: 7,010 kg, lifting height: 3,300 mm, overall weight: 6,890 kg, Subscrisa, DDG INSOLVENCY I.P.U.R.L., cu sediul în Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj, CIF RO27987796, nr. matricol: 2A0522, prin practician în insolvență Godorogea Daniel-Lucian în calitate de lichidator judiciar al societății ELEMENTO MOBILI S.R.L. - în faliment, in bankruptcy, en faillite, cu sediul social în mun. Dej, str. Dumbrava Roșie, nr. 6, et. parter, ap. 1, jud. Cluj, înregistrată la Registrul Comerțului de pe lângă Tribunalul Cluj, sub nr. J12/2389/2016, cod unic de înregistrare 36225390 desemnat în această calitate prin Încheierea Civilă nr. 1278 din data de 03.07.2025 pronunțată de Tribunalul Specializat Cluj în dosar nr. 442/1285/2025, organizează licitație publică cu strigare, cu preț în urcare, pentru vânzarea bunului identificat in prezentul anunt Prima licitație va avea loc la data de 11.02.2026 la ora 15:00, la sediul DDG Insolvency I.P.U.R.L. din Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj. În caz de neadjudecare licitația se repetă în data de 18.02.2026, 25.02.2026, 04.03.2026, 11.03.2026, 18.03.2026, în aceleași condiții și la aceeași oră. În vederea vizionării bunurilor, lichidatorul judiciar va stabili o zi de vizionare în data de 04.02.2026 între orele 10:00-14:00. Cei interesați de vizionare sunt invitați să contacteze lichidatorul judiciar și să își exprime intenția de participare, anterior datei stabilite. În caz de adjudecare, lichidatorul judiciar va emite factura fiscală pentru contravaloarea bunurilor adjudecate. Conversia prețului în lei se va realiza la data emiterii facturii fiscale, utilizând cursul de schimb stabilit de BNR pentru acea dată. Pasul de licitație este de 5% din prețul de pornire. Caietul de sarcini în vederea participării la licitație va fi întocmit de către lichidatorul judiciar în concordanță cu uzanțele în materie, va conține regulamentul de participare la licitație și se va valorifica de către practicianul în insolvență, la prețul de la prețul de 500 lei+TVA. Acesta poate fi achiziționat de la sediul lichidatorului judiciar, sau telefonic urmând a fi transmis participantului prin e-mail. Garanția de participare la licitație va fi în cuantum de 10% din prețul de pornire. Aceasta împreună cu documentația de înscriere la licitație vor trebui depuse cu cel puțin 24 de ore anterior datei licitației la sediul lichidatorului judiciar. Garanția de participare la licitație va fi dedusă din prețul bunurilor pentru care participantul a fost declarat adjudecatar și va fi restituită persoanelor care nu au fost declarate adjudecatari. La preț egal, va fi declarat adjudecatar persoana care se va angaja să achite întregul preț în termenul cel mai scurt. Termenul de plată al prețului va fi de 5 zile lucrătoare de la momentul adjudecării. În cazul în care nu se va achita și restul de preț, adjudecatarul va pierde avansul achitat cu titlu de garanție și nu va mai putea participa la următoarele licitații care se vor organiza. Pedpfx Ahjyfmvuo Hjgg

Condition: excellent (used), Year of construction: 2004, DAEWOO Mynx 540 cnc vertical machining center Year: 2004 Specifications: Axis X travel 1020 mm Axis Y travel 510 mm Axis Z travel 625 mm Rotary table ( Tsudakoma RZ-200 ) Type of CNC FANUC 21i-MB Table length 1200 mm Table width 500 mm Max. part weight 800 kg Number of tool positions 24 Spindle taper BT 40 Max. spindle speed 8000 rpm Spindle motor power 15 kW Weight 7500 kg Machine has new spindle, fitted in October 2025. Accessories/options: - 4.axis Rotary table ( Tsudakoma RZ-200 ) - Through spindle coolant - Documentations - Remote control - Coolant tank - Spindle cooler Pgodpfx Ahext E Dre Heg Under power in our warehouse!

Condition: used, Year of construction: 2002, DAEWO machining center Pedpeupkilefx Ah Hsgg ACE-VC 320

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 6,000 rpm, spindle motor power: 11,100 W, overall weight: 3,500 kg, controller manufacturer: FANUC, controller model: 0i-T, number of axes: 2, This DAEWOO Puma 160 was manufactured in 2004. A robust horizontal turning machine featuring a Fanuc 0i-T control system, it supports a turning diameter up to 160 mm and a length up to 250 mm. With a spindle speed of up to 6000 rpm and a main motor power of 11.1 kW, it's ideal for precise operations. Machine weight ranges from 3,000 to 3,500 kg. Contact us for more information about this machine. Additional equipment • Included in the offer: A set of tools. Machine Benefits Technical Machine Benefits • Turning diameter: up to 160 mm • Turning length: up to 250 mm Pgedpfx Aoyar Eqjh Heg Extra Information Machine still under power

Condition: ready for operation (used), controller manufacturer: Fanuc OM, total height: 3,240 mm, total length: 4,100 mm, total width: 6,850 mm, empty load weight: 18,000 kg, additional equipment features: yes, Type: ACE-H80 X-axes: 1250 mm Y-axes: 1000 mm Z-axes: 1000 mm Table dimensions: 800 x 800 mm Max weight on the table: 2000 kg Pgjdpfx Ahewttrme Hjg Admission in spindle (ISO): ISO 50 Power on the spindle: 25 kW Number of axes: 4 axes: X,Y,Z,B Toolstore: yes Tools: 90 positions Frequency: 20 -> 4500 rpm Number of pallets: 2x Power principal motor: 70 kva Cooling-system: yes

Condition: good (used), Year of construction: 2014, functionality: fully functional, SYNCROMILL C21-63 OPERATING RANGES Table 1600 mm X 800 mm Travel (X/Y/Z): 700 / 1,000 / 800 mm FEED AXES Speed (X/Y/Z): 75 / 75 / 105 m/min Acceleration (X/Y/Z): 11 / 11 / 17 m/s² MACHINING SPINDLES No. of spindles: 2 Spindle spacing: 700 mm Power S1/100%: 26 kW Torque S1/100%: 60 Nm Power S6/40%: 35 kW Torque S6/40%: 80 Nm Max. speed: 17,500 Rpm TOOL INTERFACE HSK 63 TOOL MAGAZINE Chip-to-chip time (VDI 2852): 2.9 s Tool positions: 56 Tools atc Psdpfx Aovxpuish Hegg Tool length: 530 mm Weight: 9 kg Diameter with fully occupied magazine: 85 mm Diameter with empty positions: 175 mm CONTROLLER / INSTALLATION Siemens 840D SL A-axis: ±180° B-axis: 360° Cooling Blum Touch Probe Rotary table 350 MM Xtra Spindle for heavy works Input power: 95 kVA Installation dimensions (L/W/H): 4.6 / 3.4 / 3.2 m Weight: 25,000 kg Additional Equipment Included: 1 x Rotary Table for advanced multi-axis machining 1 x Touch Probe for precise measurement and quality control 1 x Extra Spindle (ready-to-install for maximum uptime) Ready For Delivery. Increased productivity with two spindles operating simultaneously High flexibility for complex parts and multi-side machining Equipped with additional accessories to maximize machine versatility and reduce downtime

Condition: used, Year of construction: 2007, operating hours: 8,199 h, Year of manufacture: 2007 Empty weight: 8.080 kg Dimensions (LxBxH): 593 x 221 x 322 cm Pgsdsxqfb Sopfx Ah Hsg Digging depth: 4.42 m

Condition: used, Year of construction: 2000, DAEWOO PUMA 350 A CNC Lathe CNC FANUC 18 – T AUTOBLOCK Steady Rest Presetting Max. swing diameter over bed: 700 mm Max. swing diameter over carriage: 480 mm Max. turning diameter: 400 mm Max. turning length: 1,050 mm Max. bar capacity: 90 mm Chuck diameter: 305 mm Spindle nose: ASA – 8 Spindle speed: 30 – 3,000 rpm Psdpfxjxztzbe Ah Hogg Travel: X: 362 mm Z: 1,105 mm Tool turret: 12 positions Spindle power: 22/26 kW Weight: 9,000 kg Year of first installation: 2000 Complete with all documentation

Condition: used, Year of construction: 2025, fuel type: diesel, power: 5 kW (6.80 HP), total length: 800 mm, total width: 600 mm, total height: 600 mm, Current frequency: 50 Hz Pgsdpfxsyay Tie Ah Hjg Voltage: 230/400

Condition: used, machine/vehicle number: D7-0xxxx, Year of construction: 2003, operating hours: 2,450 h, fuel type: electric, Please contact ATS Norway for more information Pgjdpoxvli Hjfx Ah Hsg Please provide reference number upon request: 21759 Specifications: 2003 model Hours: approximately 2,450 Lifting height: 4.5 meters 48 volts Tires (see pictures) Delivery by appointment   Description: 2003 Daewoo B20T truck. The truck has a height of 4.5 metres. Delivery by arrangement. Hours: 2450 Own weight: 1 Model: B20T truck m/ 4,5 m løftehøyde