Used Dc Voltage Generator for sale (21,222)

Condition: good (used), Servo motor, electric motor, direct current motor, direct current generator, electric motor with direct current generator -Spare part: comes from a Scharmann boring mill -Manufacturer: Kessler, electric motor with direct current generators -Three-phase motor type: DM21-16 32 kW 2880 rpm -DC Gen. Type: G 50/42/1 6/18 kW -DC Gen. Type: G 44/14/2 8.2 kW Lasdpegiy T Eofx Aftjd -Technical data: see photos nameplates -Dimensions: 1750/580/H540 mm -Weight: 886 kg

Condition: good (used), SPG. Regulator, generator control, generator voltage regulator, for generator, -Manufacturer: Nucleus, Generator DG1-1000 Lajdoxnxdnopfx Aftjd -Technical data: see photo of the nameplate -Number: 11x generator available -Price: per piece -Dimensions: 320/320/H95 mm -Weight: 4.2 kg/pc.

Condition: new, Year of construction: 2026, fuel type: diesel, motor manufacturer: DC09 072A/02-13, General information Field of application: Construction Weights Empty weight: 5.500 kg Functional Generator capacity: 330 kVA Dimensions of cargo space: 380 x 220 x 249 cm Other information Fuel consumption: 197 g/kWh Generator: Mecc alte Laedot Hc Ihopfx Aftod Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1200 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2026, machine/vehicle number: 20251212005, fuel type: diesel, motor manufacturer: Scania DC16 093A, General information Field of application: Construction Weights Empty weight: 6.160 kg Functional Generator capacity: 715 kVA Dimensions of cargo space: 481 x 192 x 252 cm CE mark: yes Other information Fuel consumption: 105 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 975 l Production country: CN Laedpfx Afoy Uq Etstod Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2026, machine/vehicle number: 20251212006, fuel type: diesel, motor manufacturer: Scania DC16 078A, General information Field of application: Construction Weights Empty weight: 6.265 kg Functional Generator capacity: 825 kVA Dimensions of cargo space: 496 x 211 x 250 cm CE mark: yes Other information Fuel consumption: 109 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A49 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1160 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel Ljdpfsy Uq Egsx Aftead - Steel canopy - Tank

Condition: new, Year of construction: 2026, machine/vehicle number: 20251212004, fuel type: diesel, motor manufacturer: Scania DC13 072A, General information Field of application: Construction Lajdpfxjy Uq D No Aftjd Weights Empty weight: 5.029 kg Functional Generator capacity: 550 kVA Dimensions of cargo space: 456 x 170 x 248 cm CE mark: yes Other information Fuel consumption: 75 Liter/Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 760 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2026, machine/vehicle number: 20251212003, fuel type: diesel, motor manufacturer: Scania DC13 072A, General information Field of application: Construction Weights Empty weight: 4.924 kg Functional Generator capacity: 440 kVA Dimensions of cargo space: 456 x 172 x 250 cm CE mark: yes Other information Fuel consumption: 62.3 Liter/Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 760 l Production country: CN Additional information Please contact Team DPX for more information Laodpfxjy Uq Dvs Afted = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2026, machine/vehicle number: 20251212002, fuel type: diesel, motor manufacturer: Scania DC09 072A 02-14, General information Field of application: Construction Weights Empty weight: 3.815 kg Functional Generator capacity: 360 kVA Dimensions of cargo space: 401 x 150 x 217 cm CE mark: yes Other information Fuel consumption: 51 Liter/Hour at 75% Load Generator: Leroy Somer TAL-A46 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 525 l Production country: CN Lsdpfoy Uq Disx Aftjad Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2026, machine/vehicle number: 20251212001, fuel type: diesel, motor manufacturer: Scania DC09 072A 02-12, General information Lodpfx Aey Uq A Ssftead Field of application: Construction Weights Empty weight: 3.665 kg Functional Generator capacity: 300 kVA Dimensions of cargo space: 391 x 150 x 217 cm CE mark: yes Other information Fuel consumption: 42.7 Liter / Hour at 75% Load Generator: Lero somer TAL-A46 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 480 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, analog tachograph 400 volts Laedpfx Aebntx Rsftsd unused

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. Lajdpfxju Nzwuj Aftod The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. *

Condition: excellent (used), For sale: SEW-Eurodrive WA20/T geared motor with a three-phase DR63M6/BR/TH motor and an integrated 24 V DC electromagnetic brake. The unit is 100% functional, tested, and ready for operation. Before sale, the geared motor was thoroughly inspected and operates flawlessly. The motor housing has some broken cooling fins, which are clearly shown in the pictures. This damage is purely mechanical and does not affect the proper operation, performance, or reliability of the unit. Apart from that, the geared motor shows normal signs of wear and tear resulting from use. Technical specifications: Manufacturer: SEW-Eurodrive Gearbox model: WA20/T Motor type: DR63M6/BR/TH Power: 0.12 kW Supply: 3×230/400 V AC, 50 Hz Motor speed: 900 rpm Output speed: 15 rpm Gear ratio: i = 60 Torque: 32 Nm Electromagnetic brake: 24 V DC Protection class: IP54 Insulation class: F Rated current: 1.00 A (230 V Δ) / 0.57 A (400 V Y) Power factor (cos φ): 0.65 Duty cycle: S1 Weight: 9.46 kg Laodpfxjznaq Nj Aftsd

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Smart Line, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 180 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, power: 11 kW (14.96 HP), input voltage: 400 V, number of digital displays: 1, warranty duration: 12 months, Equipment: documentation/manual, emergency stop, DIGIMA W12-8x3200 Hydraulic Four-Roll CNC Plate Rolling Machine The DIGIMA W12-8x3200 is a hydraulic four-roll CNC plate rolling machine designed for accurate, repeatable and efficient sheet-metal forming. With a working width of 3200 mm, it is suitable for producing large cylindrical parts, sleeves, pipes, curved sections, housings, tanks and other technical components used in metalworking, steel construction, ventilation, machinery manufacturing and industrial production. The four-roll system provides a major advantage over conventional three-roll machines. The sheet is held securely between the upper and lower rolls, while the two side rolls perform the pre-bending and rolling operations. This arrangement allows both edges of the sheet to be pre-bent without removing and turning the workpiece, reducing handling time and limiting the length of straight sections left at the ends. The result is improved repeatability, higher productivity and more consistent part geometry. The W12-8x3200 can roll sheet metal up to 8 mm thick and perform pre-bending up to 6 mm. Its 3200 mm working length enables the processing of wide sheets for both one-off jobs and series production. The upper roll has a diameter of 210 mm, the lower roll 190 mm, and the side rolls 180 mm. The minimum rolling diameter is 400 mm, allowing the machine to produce a wide range of cylindrical and curved components. Lsdeznw T Uspfx Aftoad The hydraulic drive ensures smooth, stable movement and reliable clamping force throughout the forming process. The 11 kW motor provides the power required for regular industrial operation, while the rolling speed of 4 m/min supports efficient production without compromising process control. The rigid machine body and carefully arranged roll system help guide the material accurately and reduce unwanted deformation. Computerised CNC control makes the machine convenient to set up and operate. The operator can control roll movements, monitor the forming process and reproduce previously established settings for recurring jobs. This is especially useful in batch production, where the same diameter, radius and dimensions must be achieved repeatedly. The control panel also helps reduce setup time and simplifies everyday machine operation. The operating sequence is straightforward. First, the sheet is inserted and stabilised between the rolls. The side rolls then pre-bend the sheet edges, minimising flat ends. Finally, the material is passed through the roll system until the required tube, sleeve, arc or cylindrical shape is obtained. The machine can also be used for forming conical components by applying a controlled inclination of the rolls. Thanks to its wide working capacity and computer-controlled operation, the machine can be used in flexible workshop production as well as organised manufacturing processes. It is suitable for companies producing ventilation ducts, structural elements, machine covers, tanks, steel sleeves and custom-made components. Repeatable CNC settings are particularly valuable when several identical parts must be formed with the same diameter and curvature.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 300 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 260 mm, total height: 1,800 mm, total length: 1,650 mm, total width: 1,150 mm, wire diameter (max.): 18 mm, workpiece height (max.): 400 mm, workpiece width (max.): 580 mm, workpiece length (max.): 580 mm, type of input current: three-phase, table width: 600 mm, overall weight: 1,700 kg, table length: 600 mm, table height: 380 mm, empty load weight: 1,400 kg, warranty duration: 12 months, table load: 300 kg, input voltage: 400 V, quill travel distance: 80 mm, quill diameter: 6 mm, quill stroke: 80 mm, stroke length: 80 mm, tank capacity: 110 l, cutting speed: 600 mm/min, input current: 6 A, positioning accuracy: 2 mm, Equipment: documentation/manual, Digima DK7732 CNC EDM Wire Cut Machine – 320 × 400 mm Product Description The Digima DK7732 is a compact CNC EDM wire cutting machine designed for precise machining of small and medium-sized metal components. It is suitable for tool rooms, mould and die production, maintenance workshops, precision engineering companies, as well as single-piece and batch production. The machine provides an X/Y working travel of 320 × 400 mm, a 380 × 600 mm worktable, a maximum workpiece height of 400 mm, and a maximum permitted workpiece weight of 300 kg. Its rigid construction and machine weight of 1,400 kg help reduce vibration and support stable, repeatable machining. EDM wire cutting technology allows the machine to produce accurate contours, narrow slots, holes and complex shapes in electrically conductive materials, including hardened metals that may be difficult to process using conventional cutting tools. Main Advantages CNC-controlled EDM wire cutting machine Compact design suitable for smaller production areas X/Y worktable travel of 320 × 400 mm Large 380 × 600 mm worktable Maximum workpiece height of 400 mm Maximum workpiece weight of 300 kg Stable 1,400 kg machine construction Suitable for complex contours and precision components Designed for mould, die and tool production Suitable for single-piece and serial production Low operating energy requirements Reduced molybdenum wire consumption Suitable for long, continuous machining cycles Technical Specification Parameter Specification Brand Digima Model DK7732 Machine type CNC EDM wire cut machine Condition New Worktable dimensions 380 × 600 mm X/Y worktable travel 320 × 400 mm Maximum workpiece height 400 mm Taper capability 6° / 80 mm Maximum workpiece weight 300 kg Machine net weight 1,400 kg Machine dimensions 1,650 × 1,150 × 1,800 mm Control system CNC/MNC Movement method Linear control Control method Open-loop control Processing accuracy 0.01–0.02 mm Molybdenum wire diameter Ø0.13–Ø0.18 mm Maximum wire speed 600 m/min Maximum cutting speed 200 mm²/min Best surface roughness ≤ Ra 0.8 µm Maximum working current 6 A Rated power 2 kVA Water tank capacity 110 litres Water filtration accuracy 0.005 mm Application Electrically conductive metal materials With a stated processing accuracy of 0.01–0.02 mm, cutting speeds of up to 200 mm²/min, and a best surface finish of up to Ra 0.8 µm, the DK7732 is suitable for applications where dimensional accuracy and surface quality are important. Stable and Economical Operation The DK7732 is designed for stable processing, relatively fine surface quality, low energy consumption and reduced molybdenum wire wear. It is particularly suitable for users who prioritise economical operation and long continuous machining cycles rather than exceptionally high cutting productivity. Delivery and Availability Availability: available Estimated delivery time: approximately 90 working days Lasdoznttdepfx Aftod Transport and installation conditions: to be agreed individually Availability and delivery information should be confirmed before placing the final order. Why Choose the Digima DK7732? The Digima DK7732 combines a practical working range, rigid construction, high workpiece capacity and economical EDM technology. It is a suitable solution for companies looking for a compact wire cutting machine for accurate machining of moulds, dies, tools and specialised metal components.

Condition: excellent (used), Miyachi Unitek HF25 DC Resistance Welding System controller. The unit is fully functional, starts up correctly, the display works, and all functions respond as expected. The screen displays the message “EMERGENCY STOP – OPERATOR ACTIVATED,” which indicates that the emergency stop circuit has been activated – this is not a malfunction of the device. This model is designed for precise control of the DC resistance welding process. It features a clear display, numeric keypad, the ability to program welding parameters, and RS-232 and RS-485 communication interfaces. Power supply: 380–400 V AC, 50/60 Hz. Technical specifications: Manufacturer: Miyachi Unitek Model: HF25 Type: DC Resistance Welding System Power supply: 380–400 V AC, 50/60 Hz Max. output current: 2400 A RMS Max. open-circuit voltage: 10 V Interfaces: RS-232, RS-485 Inputs include: FOOT SWITCH, AIR VALVE DRIVER, VOLTAGE SENSE, WELD HEAD Laedpfxezma Sds Aftjd Condition: Fully functional. Visual condition matches the photos – normal signs of use. The power cord has been repaired (insulated area visible in the photos). The repair does not affect the operation of the device, but this information has been included for full transparency of the sale.

Condition: excellent (used), I am offering for sale a professional RF signal generator, the Agilent 83651B Synthesized Sweeper, designed for laboratory, research and development, and service applications. This device is used for testing microwave circuits, telecommunications equipment, and high-frequency measurements. Model 83651B offers a wide frequency range from 10 MHz to 50 GHz, making it ideal for laboratories involved in electronics, microwave technology, and telecommunications. The device is equipped with numerous measurement and control connectors, a GPIB interface, 10 MHz reference inputs and outputs, and the ability to interface with other measuring instruments. The equipment comes from a dismantled laboratory. It has not been tested by us and is sold as a used device. The visual condition is shown in the attached photos. Technical specifications: Manufacturer: Agilent Technologies Model: 83651B Type: Synthesized Sweeper / RF Signal Generator Frequency range: 10 MHz – 50 GHz Power supply: 230 V AC, 48–66 Hz Communication interface: GPIB (IEEE-488) Ledpfx Aszl H Ddjftead 10 MHz reference input and output Control inputs and outputs (Trigger, Sweep, FM, AM, Pulse) Applications: laboratories, research and development, telecommunications, microwave technology, RF measurements Condition Used device. Not tested. Good visual condition, with normal signs of use visible in the photos. Sold in the exact condition as shown in the photographs.

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was used during the development of a vertical wind turbine and operated for a few hours before this development phase was discontinued. The switchgear cabinets were coordinated or assembled with the generator by a professional company in Offenburg. Lasdpfx Ajyl Nntoftsd I would be glad if the equipment could be put to new use. Price negotiable upon collection.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Raytools, controller model: Raytools, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus, laser power: 3,000 W, laser wavelength: 1,080 nm, punching diameter: 1 mm, stroke rate (min.): 60 1/min, stroke rate (max.): 65 1/min, working length: 3,000 mm, working width: 1,500 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 9 mm, sheet thickness brass (max.): 7 mm, sheet thickness copper (max.): 7 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 2,200 kg, total length: 3,100 mm, total width: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, The Digima F1530 3kW is an advanced open-type fiber laser cutting machine designed for precise sheet-metal processing in manufacturing plants, metalworking companies and modern fabrication workshops. It is intended for businesses that require high cutting quality, strong performance and stable, repeatable operation in every The Digima F1530 3kW is equipped with branded components that enhance durability and cutting performance. The machine includes a RAYCUS laser source, a Raytools AUTO FOCUS cutting head, a Raytools control system, a Schneider servo system, a Japanese Shimpo reducer, H-class linear rails and an industrial TONGFEI / S&A cooling system. The entire unit is built on a heavy-duty industrial steel frame that has been heat-treated for improved stability and long-term resistance to deformation. The machine also provides flexible use of assist gases, allowing the cutting process to be adapted to the material type and the expected edge quality. Oxygen at 1 MPa can be used for carbon steel, nitrogen at 2.5 MPa is intended for stainless steel and aluminium, and compressed air at 1.4–1.6 MPa offers a more economical option for thinner parts. This gives the user better control over cutting quality, process speed and operating costs. As standard, the machine includes features that improve operator safety and protect key components. A laser-head cover helps protect the cutting head from dirt and mechanical damage, while safety barriers create an additional protective zone around the working area, improving safety during intensive production work. The Digima F1530 3kW is powered by a 3P 380 V / 50 Hz supply, and the machine itself weighs 2000 kg. It is a modern and efficient fiber laser cutter for companies looking for a solution that combines a large working area, high precision, fast operation and industrial-grade durability. This model is a strong choice wherever reliable production, high cutting quality and future production growth are important. Ledpfszlr Syex Aftoad

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 380 A, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, operating speed: 9 mm/s, reverse speed: 80 mm/s, table length: 1,320 mm, table height: 290 mm, throat depth: 180 mm, ram plate length: 500 mm, clearance between the columns: 900 mm, retraction force: 40 t, total length: 1,500 mm, total width: 1,300 mm, total height: 1,800 mm, overall weight: 1,500 kg, controller model: Estun NC E21, motor manufacturer: Siemens, Equipment: CE marking, documentation/manual, hydraulics, safety light barrier, The Digima WCY-40T/1320 hydraulic press brake is a compact and robust machine designed for the precise bending of sheet metal and smaller metal components. Its space-saving dimensions make it an excellent choice for metalworking workshops, manufacturing plants and companies producing enclosures, guards, panels, profiles and various technical components. Lasdjzlqkujpfx Aftjd The machine provides a nominal pressing force of 400 kN, equivalent to 40 tonnes, and a working-table length of 1,320 mm. The distance between the columns is 900 mm, the throat depth is 180 mm, the ram stroke is 100 mm, and the maximum open height is 290 mm. The back gauge offers an adjustment range of up to 500 mm, enabling the sheet to be positioned accurately before bending. The Digima WCY-40T/1320 is equipped with an Estun E21 NC control system, which controls the position of the back gauge on the X axis and the working position of the Y axis. The controller includes an operation counter, intelligent positioning, screw-backlash compensation and a function that retains the programmed position after the power supply has been switched off. A positioning resolution of 0.1 mm or 0.01 mm supports accurate and repeatable production. The press brake is powered by a 3 kW Siemens main motor. Its hydraulic system uses Bosch-Rexroth components and a Sunny hydraulic pump, while the electrical system includes Schneider Electric components. PARKER seals and guide rings increase the durability of the working mechanisms and support reliable operation during intensive daily use. The ram approach and return speeds are 80 mm/s, while the working pressing speed is 9 mm/s. These parameters enable efficient machine positioning and smooth bending operations. The rigid monoblock steel frame is welded and heat-treated to provide high structural stability and resistance to deformation under load. The machine is equipped with side guards, a front safety curtain, protection against excessive hydraulic pressure and high oil temperature, motor overload protection, electrical leakage protection and a safety relay. The electrical cabinet has an IP65 protection rating, and the press brake is CE-certified. The standard equipment includes bending tools, two front material-support arms, a foot-control pedal, foundation bolts, spare sealing rings and mechanical and electrical documentation. The upper punch features an 86° working angle and an R0.5 tip radius, while the multi-V lower die allows the operator to select a suitable bending position according to the type and thickness of the material. The Digima WCY-40T/1320 is a practical, user-friendly and economical press brake for companies requiring a reliable machine for the everyday processing of small and medium-sized components. Its combination of a 40-tonne pressing force, a 1,320 mm working length, NC control and high-quality branded components makes it suitable for both one-off projects and small batches of repeatable parts.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 125 t, stroke length: 150 mm, table width: 2,650 mm, table length: 32,000 mm, throat depth: 320 mm, total length: 3,200 mm, total width: 1,850 mm, total height: 2,690 mm, overall weight: 9,800 kg, controller model: Estun E21, Equipment: 4th hydraulic function, CE marking, documentation/manual, safety light barrier, The Digima PBH-125X3200 hydraulic press brake is a professional machine designed for precise sheet-metal bending in manufacturing plants, metalworking workshops and companies specialising in metal fabrication. Its robust construction, high pressing force and large working area make it suitable for both individual projects and repetitive production batches. The machine provides a maximum pressing force of 125 tonnes and a working length of 3,200 mm. This makes it possible to bend long sheet-metal components and perform demanding production operations. The distance between the columns is 2,650 mm, the throat depth is 320 mm, the maximum opening is 415 mm, and the ram stroke is 150 mm. These parameters provide sufficient working space for components of various sizes and shapes. The press brake is equipped with an Estun E21 controller, which allows the operator to program bending parameters and accurately control the position of the back gauge. The system can store up to 40 machining programs, each containing a maximum of 25 working steps. Automatic reference-point searching, rapid position indexing and parameter backup functions reduce machine setup time and improve the repeatability of finished components. The hydraulically driven bending beam ensures smooth and stable movement as well as consistent application of the pressing force. The machine is powered by a 7.5 kW motor. Precision ball screws and linear guides minimise mechanical play and support accurate component positioning. A Rexroth hydraulic valve system provides reliable oil-flow control, while electrical components from Schneider Electric and Lintech increase the safety and durability of the electrical installation. The AMADA quick-clamping system enables fast tool changes and reduces preparation time between different bending operations. The standard tooling includes a multi-V die suitable for bending sheets of different thicknesses and angles, as well as a four-piece punch set made from durable tool steel. The machine is also equipped with four adjustable back-gauge fingers, which help the operator position the material accurately before bending. Side and rear safety guards equipped with limit switches protect the operator from entering the working area while the machine is in operation. Opening a guard causes the machine to stop immediately, improving safety during everyday use. Lsdozlpanopfx Aftsad The Digima PBH-125X3200 is a solid and versatile press brake for companies requiring high bending accuracy, repeatability and production efficiency. Its high pressing force, 3,200 mm working length, functional control system and industrial-quality components make it a reliable solution for intensive use in a professional sheet-metal processing facility.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 180 mm, spindle bore: 20 mm, turning diameter: 180 mm, turning diameter over bed slide: 180 mm, total length: 81 mm, total width: 31 mm, total height: 37 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, metric thread diameter (min.): 5 mm, metric thread diameter (max.): 25 mm, metric thread steps: 5, bed width: 350 mm, rotational speed (max.): 2,500 rpm, mount diameter: 10 mm, type of input current: DC, overall weight: 40 kg, quill mount: MK 3, cone diameter: 18 mm, spindle mount: MK 3, motor model: bezszczotkowy, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, type plate available, The Digima DC TYTAN 350 is a compact lathe designed for precise machining of metals and plastics. It is an excellent solution for small workshops, service centres, garages, technical schools, prototyping facilities and hobby applications. Its compact dimensions allow it to be installed in a limited workspace, while its robust construction provides stability and accuracy during operation. The machine is equipped with a powerful 850 W brushless motor and a direct-drive spindle. This solution ensures quiet operation, smooth performance and a long service life. The continuously variable spindle speed of 50 to 2,500 rpm allows the operator to adjust the machining parameters to the material, workpiece diameter and type of operation. The Digima DC TYTAN 350 can machine workpieces with a maximum swing over the bed of 180 mm and a distance between centres of 350 mm. The spindle bore measures 20 mm, while the supplied lathe chuck has a diameter of 100 mm. The machine can also cut metric threads from 0.5 to 2.5 mm and imperial threads from 12 to 52 TPI. The TYTAN 350 is suitable for producing bushes, shafts, pins, spacers, prototype components, replacement parts and small production batches. It allows users to manufacture and repair essential components directly in their own workshop, reducing outsourcing costs and waiting times. Lodpfx Ajzlgtxoftead The standard equipment includes a 100 mm three-jaw lathe chuck, a drill chuck with an arbor, an MT2 live centre, a fixed centre, a set of five turning tools, operating and adjustment keys, and a rear splash guard protecting the workstation against chips and coolant. The machine is CE-certified and supplied with an operating manual. The Digima DC TYTAN 350 is a practical, user-friendly and versatile mini lathe which, despite its compact size, provides the performance required for real workshop applications. Its standard 230 V power supply means that no industrial electrical installation is required, making it a convenient solution for both professionals and demanding hobby users.

Year of construction: 2026, condition: new, functionality: fully functional, total width: 3,310 mm, total height: 2,830 mm, lifting height: 1,800 mm, mast type: triplex, drive type: elektrohydrauliczny, permissible axle load: 4,500 kg, arm reach: 1,400 mm, arm spacing: 2,820 mm, platform width: 2,820 mm, section length (min.): 110 mm, machine/vehicle number: TW240E, control type: manual, Equipment: 3rd hydraulic function, CE marking, documentation/manual, double-sided, type plate available, The Digima TW240E car lift is a professional, automatic two-post lifting system designed for everyday use in automotive workshops, mechanical service centres and vehicle maintenance facilities. With a lifting capacity of 4,500 kg, it is suitable for safely lifting passenger cars, SUVs and selected light commercial vehicles. The maximum lifting height of 1,800 mm provides convenient access to the underbody and allows mechanics to perform repairs, inspections and maintenance work comfortably. The TW240E features a robust base-frame construction with a floor-mounted connection between the columns. This solution makes the lift suitable for workshops with limited ceiling height. The overall height of the unit is 2,830 mm, the total width is 3,310 mm, and the clear distance between the columns is 2,820 mm. A minimum lifting height of 110 mm also makes it easier to service vehicles with low ground clearance. The lift is equipped with an electrohydraulic drive system powered by a 2.2 kW motor and a 380–400 V power supply. The automatic electromagnetic Solenoid Lock safety system allows the locking mechanisms to be released conveniently from the control panel. A 24 V low-voltage control system, emergency stop button and aircraft-grade cable synchronisation ensure stable, even and safe lifting of the vehicle. Universal two-stage and three-stage lifting arms make it possible to adjust the support points to vehicles with different wheelbases and body lengths. Adjustable rubber lifting pads with a height of 80 mm protect the vehicle sills and make correct positioning easier. Self-lubricating UHMW sliders and reinforced C-shaped arm holders increase the durability of the structure, ensure smooth operation and allow the lift to withstand intensive daily use. The Digima TW240E is a solid, functional and easy-to-operate lift for workshops that require a universal solution for servicing different types of vehicles. Its high lifting capacity, automatic safety systems, strong construction and CE certification make it a safe and durable addition to a professional workshop. Ljdpezlgc Hjfx Aftjad

Year of construction: 2016, condition: excellent (used), machine/vehicle number: SI25t, DEMAG hook block P DH PK DK DC Payload 25000Kg / 25t mint condition - unused Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation. Ledpfx Afjupwn Ustead

Condition: good (used), Machinery from honey processing factory. DC Norris hotrooms, DC Norris settling tanks, DC Norris holding tanks, crystallised tanks, super seed tanks, pump, filter sets, various filling lines to fill squeezy bottles, glass jars and plastic buckets. Lajdpfx Afjpcibmetsd

Condition: excellent (used), Direct from closed ready meals manufacturer in London. Ledpfxeywpb Se Aftjad