Used D 460 Fxl for sale (12,069)

Condition: good (used), Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=110x550 -Number: 1x axle available -Dimensions: Ø 110 x 550 mm Ijdpfxjv N A Iko Afijih -Weight: 38.9 kg

Condition: new, Year of construction: 2025, Oil lubricated rotary vane vacuum pump. Available in stock. Completely new. 12 months warranty Iodjftzx Eepfx Afioih Nominal flow: 25 m3 / h at 50Hz. Ultimate pressure: 2 mbar abs, Any clarification, do not hesitate to contact us.

Condition: good (used), Year of construction: 2009, Line for the production of "B" type energy-absorbing barriers, SIGMA posts and semi-closed channels Iodpfxet Ak Dpe Afijih For 460 x 4.2 mm strip. Weight of the whole set about 25,000 kg. The line includes the following sections: Strip uncoiler with hydraulic jack for new coils. 1 roller unit + guillotine. Manipulator. Welding area. Rolling section: -rollers for profiling SIGMA post, -rollers for the "B" guide and the semi-closed channel. Bean punching machine. Punching machine for top holes. Punching machine for bottom holes. Controller with display. Instruments for SIGMA post. Instruments for semi-closed channel. Instruments for marking.

Condition: used, Year of construction: 2014, Amboss + Langbein dryairdryer D 4 x 1 mit 4x 1 Liter tanks year 2014 price: 6.450€ Contact: Mr. Rainer Eckerle Ijdpst Hgvpsfx Afisih

Year of construction: 2025, condition: new, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. Iijdpfsiv H Eksx Afish We can also provide machines in other dimensions.

Year of construction: 2001, condition: excellent (used), I sell the Stacking / Destacking device HOMAG BARGSTEDT TBH22/D/25/12, year 2001. Stacking device one side feeding / also suitable for pallets. Isdpfx Afjm Dqmajisih Catching head system with vacuum pads Vacuum-System (including pump) Automatic loading. Infeed table motorised roller-system Outfeed table with lifting mechanism motorised roller-system Outfeed table front roller-system Outfeed feeding station for stacked material Security fence system fully complete ! Working capacity apprx 8 tacts / min Available immediately. Ready for work, possible to test. With CE Certificate and full manuals.

Condition: used, Button machine, knee lever press, crimping machine, eyelet machine, workshop press with foot pedal -Knee lever press: with foot pedal, on solid base frame -Table size: 260 x 180 mm bore Ø 60 mm -Spindle holder: Ø 32 mm -Intermediate dimension: 135 mm -Dimensions: 460/400/H1450mm -Weight: 113 kg Iisdpfx Afet E D Dneioh

Condition: good (used), Refrigerant system Copeland with original condenser Type: D6DT5-320X-AWM/D (x4) Volume: 126.9 m3/h (x4) Cooling capacity: 220 kW at -10°C/40°C, 56.2 kW at -35°C/40°C Refrigerant: R404A With original condenser Guntner GVH 067B/2x3N Pieces in stock: 1 Condition: Used Iisdpfx Aog N Hu Sjfieh We have many other refrigeration machines. Chillers, compressors, coolers, condensers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is available on machineseeker.

Condition: good (used), functionality: fully functional, machine/vehicle number: 5.000 Liter-Tankstelle, 5.000 l diesel or heating oil pump station Iiodpfx Afodccdqsieh

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. Iedpfx Afsng Ax Soijih POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV - Special tool according to specification OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Year of construction: 2018, condition: new, Freeze dryer completly new. Pilot plant. Capacity:1 kg / 8hrs Effective Area :0.15 m2 Wet Input per 8 hr: 1 Kg Dry Output per 8 hr: 0,2 Kg Iiodofn Iudopfx Afish Temp Range Drying: 30 ºC - 100 ºC Water Removal Capacity: 0,8 Kg Ultimate Condenser Temp: -40 ºC Defrosting Method: Natural Total Connected Load : 1Ph/15 Amp Connection Average Connected Load: 1Ph/15 Amp Connection Plant dimensions: 1,1m*0,7m*1,5m 1. Freeze Drying Capacity: Wet input 1 kg. per shift. On a higher side, each shift shall be of 8 to 8.5 Hrs. The wet input can either be biological cultures, enzymes, polymers, extracts, sprouts, vegetables, fruits, nutraceuticals, herbs, spices, sea foods, instant curries/gravies etc. of minimum 15% solids. 2. Residual moisture: Final moisture content on the product shall be less than 4%. 3. Compressed air: Maximum pressure 5Kg/Sq.cm. Flow rate 3 cubic Meter/Hr. Material: Stainless steel 304 Flow rate vacuum pump: 13 m3/h

Condition: excellent (used), Year of construction: 1997, I sell the throughfeed drilling machine with HOMAG BST440/30/D. Year 1997 Configuration: 4+4 motors from under 1+1 motors from sides per 24 spindles / 32mm 0 motors from back 2+2 motors from top 4 pcs. material pressure from top Very good condition. Available immediately. Ijdpjt Nddpefx Afijih

Condition: excellent (used), Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane Iijdpjv N A Hajfx Afijh -Travel wheel axle: for crane trolley -Type: D=120x649.5 Part 3 Crane 1/2 .: 1031 4148 -Dimensions: see photo technical drawing -Number: 3x axle available -Price: per piece -Dimensions: Ø 120 x 649.5 mm -Weight: 35 kg/piece

Condition: ready for operation (used), Copeland compressor unit Type: D6DT5-320X-AWM/D (x4) Volume: 4 x 126.9 m3/h Cooling capacity: 220 kW przy -10°C/40°C, 56 kW przy -35°C/40°C Refrigerant: R404A Reference number: Z17 Pieces in stock: 1 Condition: Used We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker. Iedsh Aktcepfx Afijih

Condition: refurbished (used), functionality: fully functional, 50000 litre unit to store heating oil or diesel Iiodpfoi Arvksx Afijh

Condition: good (used), Watson Marlow 323S/D peristaltic pump *new price 9890 The 323 series pumps have a chemical resistant ABS top and IP31 protection as well as a membrane keypad to control the pump and a digital LCD to display the speed. Iisdpfxotnct Ue Afieh 323S high-performance pumps with manual control Universal pump for precise dosing or transfer tasks Flow range: 0.1-2000mL/min. Speed range: 3 to 400 rpm (adjustable in steps of 1 rpm) Display type LCD Reversible yes The pumps in the 323 series have a chemical-resistant ABS top and IP31 protection as well as a membrane keypad for controlling the pump and a digital LCD for displaying the speed. Dimensions (L x W x H) 230 x 230 x 132 mm Condition: used You can find more laboratory devices - new and used - in our store! International shipping costs on request!

Condition: used, Year of construction: 2005, Used Güntner AGVH 080.1A/2x5-M(D) air cooled condenser on NH3 (Ammonia). Complete with 10 Guntner Ziehl Abegg FE080-SDS-6N.6 fans - 50 Hz - 0,96/0,24 kW - 760/480 RPM - diameter 800 mm. Iiedpfxorlk Ezs Afioh

Condition: good (used), Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=120x320 Iiedpfx Aev N A Htjfieh -Dimensions: see photo technical drawing -Number: 1x axle available -Dimensions: Ø 120 x 320 mm -Weight: 25 kg

Condition: ready for operation (used), Guntner Condenser Iisdpfx Ajqi Ekwsfieh Type: GVH 090.2A/2x5-N(D) Cooling capacity: 1057.2 / 920.7 kW Airflow: 279,000/229,000 m3/h Number of fans: 10 x 900 mm Unit dimensions: 10200 x 2300 x 1450 mm RPM: 890/700 Capacity: 323.8 L Weight: 2,282 kg Stock: 2 pieces Stock number: SK 108 Condition: Used, good

Condition: excellent (used), Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane Iisdpfx Afsv N A Hyjijh -Travel wheel axle: for crane trolley -Type: D=90x244 -Dimensions: see photo technical drawing -Number: 3x axle available -Price: per piece -Dimensions: Ø 90 x 244 mm -Weight: 10.4 kg/piece

Condition: ready for operation (used), Compressor COPELAND Iedpfeiba Rdsx Afieih Type: D8DH1-500X-BWM/D Volume: 151 m3/h Cooling capacity: 103 kW at -5°C/40°C 85 kW at -10°C/40°C, 44 kW at -25°C/40°C Refrigerant: R404A Pieces in stock: 6 Weight: 350 kg Reference number: S 117 Condition: Used in good condition We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: good (used), Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=240x545 -Number: 1x axle available Iodpfx Aev N A Iqefijih -Dimensions: Ø 240 x 545 mm -Weight: 70 kg

Condition: used, Centering device, centering unit for bending machine, straightening machine, sheet metal straightening machine, strip straightening machine, strip straightening device, sheet metal straightening system, for eccentric press, hydraulic press -Manufacturer: Schied: centering device -Hole distance: 300/90 mm O 13 mm Iijdpfx Afohx E Uneish -Dimensions: see photos -Total dimensions: 460/160/H160 mm -Weight: 17.5kg

Condition: used, Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 7550 mm Isdpjb Uhphsfx Afieih -Height of table top: 196 mm -Working height: 196 mm -Transport dimensions: 7550/490/H196 mm -Weight: 1726 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range: 50-250 rpm -Motor: adjustable Iiedpfx Aoc Nlyhefieh -Drive shaft: Ø 28 mm -Brake -Construction: B5 -Number: 1 piece of motors available -Price: per piece -Dimensions: 655/200/H250 mm -Weight: 28 kg