Used Cycle Lathe for sale (8,398)

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC Control: MTC K Storage location: Halberstadt Lrjdpoy Edz Aofx Afaok Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement.

Condition: excellent (used), Year of construction: 1998, turning diameter 570 mm turning length 1000 mm Lodpfxjy D T Uve Afasrk control Siemens / Weiler D2 weight of the machine ca. 3,2 t dimensions of the machine ca. 3,0 x 2,0 x 1,9 m

Condition: excellent (used), GILDEMEISTER Cycle Lathe Model NEF 320 Year of manufacture: 2003, with only 5,653 power-on hours (spindle hours approx. 1,200 estimated!) CNC Control: SIEMENS 810 D with Manual Turn software Work Area: Centre height: 160 mm Centre distance: 750 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Chuck diameter: 200 mm Cross travel: 185 mm Spindle: Spindle nose DIN 55027: Size 6 Spindle bore: 50.8 mm Spindle taper: MK 6 Spindle diameter in front bearing: 85 mm Main Drive (AC): Main drive: 100% duty cycle, 9.0 kW Max. torque: 100% duty cycle, 410 Nm Speed range: 10 – 4,000 rpm Speed control: stepless Gear stages: 2 (ZF gearbox) Feed Drives (AC): X-axis feed force: 100% duty cycle, 3,000 N Z-axis feed force: 100% duty cycle, 6,000 N X rapid traverse / feed speed: 8 m/min Z rapid traverse / feed speed: 10 m/min Tailstock: Quill diameter: 70 mm Quill stroke: 120 mm Quill taper: MK 5 Machine Dimensions: Length: 2,450 mm Height: 1,825 mm Width/depth: 1,815 mm (2,400 mm with electrical cabinet doors open) Weight: 2,000 kg Ljdpfey D Eplsx Afajrk Connected load: 14 kVA Includes: SCHUNK ROTA-Plus 3-jaw wedge-bar power chuck Ø 200 mm Multifix quick-change tool post size B 5 MULTIFIX tool holder cassettes size B Live centre Quick-action drill chuck Removable chip tray Coolant unit Electrically interlocked chuck guard Machine leveling feet Operating manual Condition / Description: +++ Very good +++ The NEF 320 comes from a vocational training institute and has seen very little use (see power-on hours). It was mainly used for training and demonstration purposes—no production workload! The machine bed is essentially in as-new condition. Backup battery replaced; data backup performed. The machine is impressive thanks to its performance and the professional SIEMENS 810 D control with user-friendly MANUAL TURN software. Function videos can be provided upon request.

Condition: used, YOM 2013 Chuck Size – 150mm Bar Capacity – 53mm Swing – 430mm Spindle Speed - 4,000 RPM Control - Siemens 802D Distance Between Centers – 1000mm X-Axis Travel – 220mm Z-Axis Travel – 1065mm Swing Over Cross Slide – 200mm Motor – 10 HP 4-Way Tool Post Tailstock Lrjdpfoy Dtuiex Afask Over Dimensions (Approx.) 2.75m x 1.3m Weight (Est.) 2800kgs

Condition: used, Year of construction: 2000, Technical details: turning diameter: 800 mm turning length: 2965 mm max. turning dia. over saddle: 520 mm spindle bore: 92 mm turning speed range: 3 - 1800 U/min Lrodpfoxxig Uex Afaok spindle head: Größe 11 total power requirement: 37 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 5,2 x 2,2 x 1,9 m Teach In Control MTC-K 3-jaw chuck ROTAS Dia. 400 mm face plate RÖHM Dia. 630 mm 4-station toolholder system PARAT 1 fixed steady coolant attachment and chip conveyor *

Condition: used, Year of construction: 1996, Technical details: turning diameter: 500 mm turning length: 1500 mm turning diameter over bed slide: 290 spindle bore: 71 mm turning speed range: 3 - 2800 U/min rapid speed: 10 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 22 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 3,0 x 1,6 x 2 m Lrsdpfjwwlvlox Afaok with Teach In controll R&D MTC-K PARAT toolpost 1 fixed steday dia. 100 mm 4 jaw face plate dia. 500 mm coolant attachment *

Condition: used, Year of construction: 1998, Technical details: turning diameter: 830 mm turning length: 4000 mm turning diameter over bed slide: 540 mm spindle bore: 130 mm turning speed range: 2 - 1600 U/min rapid speed: 4 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 55 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 7 x 2,2 x 2 m with Teach In controll R&D MTC-K Lrjdpfx Afswwlt Rsaek MULTIFIX toolpost size D coolant attachment *

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details turning diameter 570 mm turning length 2000 mm control Heidenhain turning diameter over bed slide 340 spindle turning speed range 1 - 2500 U/min weight of the machine ca. 3,6 t Additional information Features: Lrsdpey Dpvvefx Afaok 2 steady rests Manual chuck with jaws Tool holder with inserts

Condition: good (used), Year of construction: 1999, functionality: fully functional, Gildemeister NEF 320 / Cycle Lathe, Year of manufacture: 1999, Control: Manual Plus, Centre distance: 750 mm, Swing diameter over bed: 320 mm, Spindle speed up to 4,000 rpm, 2 gearbox stages, Multifix toolholder, Tailstock, 2 steadies, Lrjdpfx Afjy Ev I Uoaek Accessories,

Condition: excellent (used), Year of construction: 2004, Year of manufacture: 2004 Sauter 8-position VDI 20 turret with all stations powered tools Spindle holding brake Lrsdpfxjy Dckaj Afask Interpolating C-axis Reinforced coolant pump 2.3 bar / 28 l/min Control: Heidenhain MANUAL PLUS (cycle control) Monitor: 10.4" TFT VGA color display Working area & capacity Swing diameter: 320 mm (over bed) / 150 mm (over cross slide) Distance between centers: 750 mm Cross travel: 185 mm Spindle bore: 56.6 mm Spindle nose: Size 6 (according to DIN 55027) / Mount MK 6 (AC) Drive power: 9 kW (at 100% duty cycle) Max. torque: 410 Nm Speed range: 20 – 4,000 rpm (2 gear stages) Stage 1: 20 – 1,000 rpm Stage 2: 40 – 4,000 rpm Feed & axes Rapid traverse (X/Z): 8 / 10 m/min Feed speed: 5 m/min Feed force: 300 daN (X) / 600 daN (Z) C-axis: Interpolating (option included) Tool turret & tailstock Turret: 8-station disc turret (Sauter), all stations powered Speed for driven tools: Max. 6,000 rpm (3.8 kW) Tooling system: VDI 20 (DIN 69880) Tailstock: Quill diameter 70 mm, stroke 120 mm, MK 5 mount Dimensions & capacities Footprint: approx. 2,600 x 1,915 x 1,730 mm Weight: approx. 2,200 kg Coolant tank: approx. 70 liters Fixed steady rest with rollers, guide diameter 10-115 mm Travelling steady rest with rollers, guide diameter 10-115 mm Three-jaw chuck Schunk Rota Splus 200-52 J 6, high precision Quick-action chuck with lever, SSF 40/6 Ortlieb, collet 173 E Preparation for faceplate operation, includes speed monitoring with separately adjustable speed supervision. Tooling equipment: fixed turning tool holders and driven tool holders Jaws / hard and soft Collets 173 E The machine was used in single-part production for prototype manufacturing. Low spindle running hours Available immediately.

Year of construction: 1999, condition: ready for operation (used), A cycle-controlled CNC lathe Böhringer is available. Swing diameter over bed/faceplate: 570mm/365mm, center height: 280mm, bed width: 360mm, travel X: 345mm, cross slide dimensions X/Y: 260mm/680mm, bed slide guide length: 520mm, speed: 2500rpm, feed: 50mm/rev, rapid traverse X/Z: 10m/min/5m/min, quill stroke: 190mm, center angle: 60°, max. workpiece weight: 400kg/1000kg/1600kg. Documentation available. An on-site inspection is possible. Expected to be available July 2026. Ljdpfx Afoy Equyjajrk

Condition: new, functionality: fully functional, overall weight: 2,500 kg, total length: 4,200 mm, total width: 2,500 mm, total height: 2,170 mm, travel distance X-axis: 390 mm, controller manufacturer: Siemens, controller model: 840D sl + ShopTurn mit „manual machine“, turning diameter over cross slide: 370 mm, bed width: 433 mm, center height: 315 mm, center width: 2,000 mm, quill diameter: 100 mm, quill stroke: 200 mm, rapid traverse Z-axis: 8 m/min, rapid traverse X-axis: 8 m/min, spindle bore: 140 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, turning diameter over bed slide: 630 mm, Equipment: rotational speed infinitely variable, Swing over bed: 630 mm Center distance: 2000 mm Maximum speed range: 2500 rpm Spindle power (100% duty cycle): 20 kW (AC drive) Lrjdewgbuijpfx Afaok Spindle mount: Camlock D11 Spindle bore: 140 mm Included equipment includes: - 8-station SAUTER VDI-40 turret - Movable control panel along the entire length - Chip conveyor - Siemens AC servo motors - Siemens power supply and amplifier modules - Automatic (or via M function) gear change (2 speeds) - Machining area covered by two sliding doors - Operating mode 1 and operating mode 2 (setup mode at 5 rpm) - Siemens 840D sl ShopTurn control system with "manual machine" - 15-inch touchscreen format 16:9 - With manual machines, cycles can be executed without creating a program header. - Siemens control option: residual material detection. - Absolute encoder (i.e., no reference point travel required). - USB interface on the control panel. - Manual tailstock with drag device and 100 mm spindle diameter. - Automatic central lubrication. - Coolant system.

Condition: used, Year of construction: 2004, control Heidenhain turning length 1.000 mm turning diameter over bed 500 mm turning dia. over slide 290 mm centre distance 1.500 mm x-axis 260 mm z-axis 1.000 mm spindle bore 70 mm spindle tunring speed 3.000 U/min spindle motor 12 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery Ledpfxjy A Tdbe Afaork if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 1995, turning diameter over cross slide: 515 mm, spindle bore: 128 mm, turning length: 2,000 mm, turning diameter: 820 mm, quill stroke: 280 mm, quill diameter: 125 mm, quill travel distance: 280 mm, feed length X-axis: 520 mm, workpiece weight (max.): 3,150 kg, rotational speed (max.): 1,600 rpm, workpiece weight between centers: 3,150,000 g, Technical data in the attachment. Lrjdsy Emrdspfx Afaok

Condition: good (used), Year of construction: 2000, Spindle module replaced in 2008 Swing diameter over bed: 630 mm Swing diameter over support: 370 mm Spindle bore: 105 mm The machine is supplied with a 250 mm manual chuck. Spindle speed range 1: 4 - 430 rpm. Spindle speed range 2: 430 - 2500 rpm. Lrjdpfxey A I I Io Afask Main motor power: 18.5 kW S6-40%

Condition: ready for operation (used), Year of construction: 2006, spindle bore: 130 mm, turning length: 600 mm, turning diameter: 1,800 mm, Turning diameter 1800 mm Turning length 600 mm Siemens control 6-jaw chuck Spindle bore 130 mm Spindle nose DIN 55027 size 11 Speed range 1 - 400 rpm Spindle torque 9000 Nm Total power requirement 38 / 52 kW Ledpfxjy Aw Sve Afaork Machine weight approx. 25 t

Condition: excellent (used), Year of construction: 1998, turning diameter 410/ 440 mm turning length 950 mm control Siemens / Weiler D2 workpiece weight max 900 kg spindle head Gr 6 MK 6 spindle bore 54 mm Lrjdpsyrh Apsfx Afaek face stroke 230 dia. of quill MK 4 mm quill stroke 120 mm centre height 200 mm thread pitch max. in mm 0,1 - 250 mm spindle turning speed - stepless 1 - 3000 U/min total power requirement 12 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,3 x 1,5 x 1,8 m

Condition: repair required (used), Year of construction: 2003, Kern lathe CD 402 Baij 2003 in top condition but with control system issues. Lredpfx Asxn Axcofask

Condition: repair required (used), Year of construction: 2002, functionality: not functional, turning length: 750 mm, swing diameter over bed slide: 320 mm, type of input current: three-phase, We offer this used Gildemeister NEF 320 cycle-controlled lathe, year of manufacture 2002. Control system: Heidenhain 4110 Lrodpfxoypwhve Afajk Control does not boot up, see error message in the photo. A floppy disk with the machine data is available. Other condition unknown, as it comes from the closure of a model making company. Machine is still under power. Crane loading onto your truck is possible.

Condition: used, Year of construction: 1998, turning diameter 555 mm turning length 4000 mm control Monforts Control System type MTC-K CCUO turning diameter over slide rest 290 mm cross movement . mm Lrjdpfoyqv N Usx Afajk spindle passage . mm turning speeds 1600 U/min transmission ratio . quill stroke . mm rapid traverse . m/min main drive motor . kW 3-jaw chuck Rotha-S Plus 3-jaw-chuck diameter . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m Serial number: 262/01 Machine number: Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2003, centre height 255 mm centre distance 1.080 mm turning diameter over bed 500 mm turning diameter over slide 290 mm turning length 1.000 mm control EuroTurn spindle bore 70 mm spindle taper KK 8 DIN 55027 3-jaw-chuck diameter 250 mm bed width 360 mm turning speed range 2 - 2.800 U/min rapid travel - longitudinal/face 10 / 5 m/min quick change toolholder PARAT Gr. 2 drive capacity - spindle motor 11,0 kW taper in tailstock-quill MK 5 dia. of quill 80 mm quill stroke 160 mm voltage 400 V total power requirement 16,0 kVA weight of the machine ca. 3,0 t dimensions of the machine ca. 2,85 x 1,60 x 1,80 m Lrjdpfxowizlte Afaek - Serial-No.: 495 / 03 - control: EuroTurn - quick change tool holder PARAT - coolant equipment - machine lamp

Condition: used, Year of construction: 2000, centre height 280 mm centre distance 1200 mm turning diameter over bed 570 mm turning diameter over slide 365 mm turning length 1000 mm spindle taper DIN 55027 Gr. 8 control Sinumerik 810 D SIEMENS bed width 360 mm spindle bore 62 mm turning speed range 3 - 2500 U/min feed: 5000 mm / min rapid travel - longitudinal/face 10 m/min Lsdpfx Asx E Dn Aefaerk 3-jaw-chuck diameter 250 mm quick change toolholder SANDVIK Coromant Capto drive capacity - spindle motor 25 kW taper in tailstock-quill MK 5 dia. of quill 100 mm quill stroke 190 mm voltage 400 V weight of the machine ca. 5,0 t dimensions of the machine ca. 3,55 x 2,20 x 1,95 m - Serial No.: 2022-3742-03 - CNC-Control SIEMENS Sinumerik 810 D - Rapid feed - Coolant equipment - Machine lamp

Condition: used, Year of construction: 1999, centre height 255 mm centre distance 1080 mm turning diameter over bed 500 mm turning diameter over slide 290 mm turning length 1000 mm spindle taper KK 8 DIN 55027 control Sinumerik 810 D SIEMENS bed width 360 mm spindle bore 70 mm turning speed range 2 - 2800 U/min rapid travel - longitudinal/face 10 / 5 m/min quick change toolholder MULTIFIX Typ B / CAPTO drive capacity - spindle motor 11,0 kW taper in tailstock-quill MK 5 dia. of quill 80 mm quill stroke 160 mm voltage 400 V total power requirement 16,0 kVA Lrodpfoqzm Ngox Afaok weight of the machine ca. 3,0 t dimensions of the machine ca. 2,85 x 1,60 x 1,80 m chip conveyor 4,00 x 0,40 x 1,50 m - Serial-No.: 346 / 03 - control: SIEMENS Sinumerik 810 D - quick change tool holder MULTIFIX - coolant equipment - machine lamp

Condition: excellent (used), Year of construction: 2011, Centre height: 330 mm Swing over bed: 660 mm Lodpfx Afel D Rddeasrk Swing over cross slide: 430 mm Distance between centers: 1500 mm Bed width: 400 mm Spindle mount DIN 55029: A 8 Spindle bore: 82 mm Speed range, 3 steps: 7 – 135, 30 – 550, 110 – 2200 rpm Feed rate X/Z: 3000 / 6000 mm/min Rapid traverse X/Z: 4 / 8 m/min Tailstock quill taper: MK 5 Drive power: approx. 9 kW Dimensions (L x W x H): 3450 x 1750 x 1770 mm Weight: 2850 kg Equipment / Special features: • Cycle control FAGOR 8055-i A TC with TFT color display • Electronic handwheels • Interface • 4-position tool turret, programmable change via motorized drive • 3-jaw chuck, make BISON, diameter 300 mm • Full enclosure, sliding doors with electric safety interlock • Coolant system • Air-conditioning for the control cabinet • Central lubrication • Machine feet • Lighting • CE conformity Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2005, 1 used, well-maintained high-performance cycle lathe with FAGOR 8055 control, 8-position VDI 40 tool turret, constant cutting speed, pneumatic 3-jaw front chuck, and chip conveyor Manufacturer: MICROTURN, Origin Taiwan Model: Challenger BNC 2680X Year of manufacture: 2005 / Commissioned in 2006 Technical data: Ljdpfx Afjyy N Rfsaork Center height: 325 mm Distance between centers: 2150 mm Swing diameter over bed: 650 mm Swing diameter over cross slide: 410 mm Swing diameter in gap: 870 mm Spindle speeds: 0 – 2,400 rpm Spindle bore: 82 mm Spindle motor: 15 / 22 kW Machine weight: 4,800 kg Accessories / Special Features: • Cycle control FAGOR 8055 with alphanumeric keypad o LCD color monitor o Graphical cycle simulation o 2 electronic handwheels • Pneumatic 3-jaw front chuck, make SMW, Ø 315 mm o By using this pneumatic front chuck, the entire spindle bore of Ø 82 mm remains available. With hydraulic chucks, the spindle bore is reduced by the required draw tube. • 8-position tool turret VDI 40 • Hinged belt chip conveyor • Fixed steady rest • Automatic headstock lubrication • Automatic lubrication of longitudinal and cross slides • Tailstock • Coolant system • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany